You can tell that the painter in the 1st video is a pro just by how he is tapping the brush on the side of the bucket. He's been doing that for a very long time. His hands are so steady that takes at least a couple of years to know how to load a brush properly. The hands being as steady as they were isn't something you can teach you either have it or you don't!!!!

As a painter of 30 years I can fully respect those cut in skills. I took third place at the Sherwin Williams local, “Pro Show” competition here in Southern Oregon. It takes years of practice to get that skilled. Hopefully you’re working behind a great drywall person too.

All members of the proletariat contributing positively to society through their labor. We all love to see it 😍

It is always very satisfying to watch people who are true masters of their craft.

5 Questions to Ask Your Builder Before Signing a Contract: 1. What experience do you have with my kind of project? 2. Are you accredited? 3. Can I see some finished projects? 4. Can I see a project in progress? 5. Do you have references and reviews? 👆💪

These guys have a level of confidence I don't have in walking.

The level wall should be ideal working as a carpenters apprentice for nearly six months we have used a similar method several times to cover large area quickly without reducing quality

As a painter of 30 years I can fully respect those cut in skills. I took third place at the Sherwin Williams local, “Pro Show” competition here in Southern Oregon.

I've enjoyed these videos for quite a while now. But I'm noticing that more and more of them don't stay running long enough to see what it's turning into, or what the point of the action was. Like at 1:59, I didn't see the point (or the skill) in drilling so many bore holes then tapping them out.

You are a great worker, keep up the skills

Brings back memories

that person trimming the wallpaper was pretty impressive, its so hard to cut a straight line.

13:57 this man is dressing the bundles of cable without a cable comb. He essentially uses talcom powder (baby powder) to dry lube the cables to make it easier to comb straight. Source: low voltage tradesman here.

Are we not gonna talk about the guy at 5:22 licking the tool he was using? True commitment to his job there...

Super! Nur die ständige Eigenreklame macht mich wahnsinnig!!

As someone who has worked in cable management for years, its nice to see beautiful cable runs, however sadly now with CAT6+ and beyond, its actually preferred to not bundle this way as it can contribute to NEXT, that doesn't mean it can't look good, just not this good.

bros hands in the first clip steadier than my income

I see your videos every day, greetings from Indonesia🇮🇩🇮🇩🇮🇩

I really like to see how some people do a great in their work and very organized

These were very, very satisfying!

1:13 forbidden whipped cream

This video was cool

Nice job cable guys ..👍👍👍🇬🇧🇬🇧🇬🇧🇬🇧

D - Queridas amizades, sim, Paulo de Tarso diz em seu Livro aos Gálatas 6.14-16: "Longe esteja de mim, gloriar-me a não ser na Cruz de nosso Senhor Jesus Cristo, pela qual o mundo está crucificado para mim, e eu para o mundo..." A cruz de nosso Senhor Jesus Cristo, é o único instrumento, dado por Deus, pelo qual podemos manter o mundo longe de nossos corações, isto é, no chão muito abaixo de nossos pés, e aqui ainda fica mais interessante - nos coloca desprendido, a meio caminho do reino-paraíso-céu, como o criminoso crucificado, que tendo a vitima inocente ao seu lado direito, descobriu a lonjura tanto do céu quanto da terra, mas bendito seja Deus, o humanoDeusJesusCristo estava bem ali, ao alcance de sua voz-suplica: "Senhor, lembra-te de mim, quando entrares no teu Reino." E, ainda repetimos; estando com os pés pendurados, cravado no madeiro, impossibilitando-o de caminhar neste mundo, e os braços pregados também em cruz, não lhe permitindo 'tocar' os céus, pode dirigir com sua arrependida vós; resoluta, intrépida, podendo ouvir da boca do crucificado do meio, relatado no Livro de Lucas 23.42,43: "Ainda hoje estarás comigo no Paraíso...", só por grande exercício empático, é que podemos entender superficialmente, quão inimaginavelmente foram os sofrimentos de Cristo ali por nós... Vejam como é lindo e consolador, quando percebemos que Ele está, como crucificado, junto a nós quando ocupamos em glória a mesma Cruz que Ele um dia ocupou, e sobre a horrível cruz venceu o mundo e aquele que detinha até então o poder da morte e do inferno como relatado está no Livro aos Hebreus 2.14,15 e, no livro do Apocalipse 1.18: "E, visto como os filhos participam da carne e do sangue, também ele-Cristo, participou das mesmas coisas, para que, pela morte, aniquilasse o que tinha o império da morte, isto é, o Diabo, e livrasse todos os que, com medo da morte, estavam por toda a vida sujeitos à servidão. / Eu-Jesus fui morto, mas eis aqui estou vivo para todo o sempre. Amém! E tenho as chaves da morte e do inferno." Entendamos que não é a nossa Cruz, como diz Paulo, é a Cruz de Cristo, a Cruz da VITÓRIA... Se nosso Senhor ali triunfou, nós também em tudo triunfaremos, lembremo-nos que Ele-Cristo é o humanoDeusJesusoEmmanuelDeusconosco‼ Bom tudo a todos, sempre na doce companhias d'aquEle que vive para interceder por nós‼🌹😷

Ya my dad hates painting the house so whenever you show him a paintbrush he starts having flashbacks

If this is all jobs being done perfectly... Then I've seen some in real life who are gods

I was amazed when I had my windows tinted that they can use that soapy water and the adhesive on the tint will still work.

I feel like and ai is generating the script for these videos lmao.

@TechZone where is the part from the Thumbnail?

9:36 when you ate too much nuddles 🥢🍝 🤣😝

Thank gods the network person was using velcro! Anyone who has had to troubleshoot and rewire a mass of cables that are zip tied every 6 inches knows how horrible that is to deal with

14:09 i am pretty sure that would fuck up the electrical signals and also be dogshit heat wise

1:08 the forbidden ice-cream

Don't work hard, work smart!

لا إله إلا الله محمد رسول الله

in 13:00 is the dambest idea I ever seen

2:19 just why it’s seems like more work and takes longer than just cutting it out normally

God bless God loves you

1:08 *forbidden ice cream*

9:42 Forbidden Licorice

thanks to you i can sleep well tonight, very eyegasm

When’s the next vid from you guys?

Machines and tools doing their jobs perfectly

7:47 high pressure damages surfaces steam works best

Watched different parts of this in another video,....that I watched the other day.......geesh....

Who is the voice of these videos? I have always wondered.

16:29 that is a huge mistake.. never caulk the floor the the trim/shoe.. you'll be peeling it up in less than 1 year. The floor expands and shifts with temperatures and weight...

1:49 missed a spot in the corner

Did ya guys change the thumbnail of video? Cause I remember it Big thing thousands of green wire was in a mess and then an after shot of them all being bunched up in rolls

6:43 the forbidden tortilla

In painting that's called cutting in, easy peasy to do, you also don't paint from the bottom up but from the top down, that way you are not working over wet paint.

yo ! whare i can buy the wallpaper at 11:58

6:52 lava pizza

Literally never seen a yellow handicap parking spot

Wow. I've done most of these jobs and I can tell ya these folks aren't being paid what they are worth I'll guarantee that

These work are dane ordinary people in India. No need to experts.

I don’t play soccer because I enjoy the sport. I’m just doing it for kicks.

Is laser welding actually strong?

5:02 OMG is Jack Harlow!

LOL elettricisti

2:25 - That's not even paint?! 😳

I love and hate cutting in, never used tape I'm just a diy'er. A good natural bristle brush, new paint & damp rag make a big difference.

Bet that dude cutting the bush a player. Only bc he so good with bushes

Of course the green cable video isn't here.

Where is the fiber optic wire from the thumbnail!!!?

I used to work spraying foam insulation, icynene, it's a great product!

I like.

JESUS loves YALL sm

@15:20 That's Plaster.

Yessir. Every bush deserves a good shave💀

6:50 cheese

Wished I'd known about the pipe before. We just spent weeks digging up an old pipe and replacing it with a new one. Damn it.

Cable ties on data cables are a no no. Only velcro ties.

Most clips are way too close up and way too short. I don’t even know what the finished product is !

Speeding up the vids on display doesn't alow me to truly appreciate the work. . . . . After watching further I see its not work speed so much as work quality

Oh I love liquid sand

So glad to see so many women taking on jobs that are normally done by men

@15:13 that is not stucco that is hand made crown molding.... stucco is sprayed on. just an FYI

9:40 what’s that black goop lol

😊😊😊😊😊

16:40 is he really sealing the gap between the door and the floor?

What is the music used in background ? Shazam can't find it :shrug:

Everyone did their job perfectly.... except most of the cameramen who don’t know how to switch to landscape view.

Amazing painters, gardeners and other skill workers. At 16:54 a giant auger is turning and workers are standing wearing ordinary shoes, no steel toed safety boots. Even more appalling is at 16:57 with this worker wearing rubber sandals, he shouldn't be standing that close at all.

dont you hate the clickbait

I am a trade qualified Painter and the one in this video would never make it if he was this slow doing his job, it shouldn't take more than about three minutes to cut in half way down the walls as well as to the ceiling in a normal sized room, the person doing the cutting in to the lower walls and skirting also rolls the walls and keeps up with the person cutting into the ceiling. Sad to see such slow workers these days let alone the quality of workmanship has dropped so far that none of them could pass the quality test we used to have back in the day for Commision homes or all Government work

damn dude is making epoxy sound like a disease, E-poxy lol

good

14:15 Car body builder from CZ: In Europe (everywhere i guess), those can be also sometimes a new original skeletons or it's parts. And having it just surface corroded is fine. All you have to do is to grind it all somehow. But he does it that way, so i wonder how will he make sure to make it dry in time now because it's just a raw metal. I don't know what will this "specialist" do after it got all wet, but i guess he has another idea. I personally have none, but there could be something. The water could be either destilated to make sure it's not an electrolite or he put some kind of magic coat onto it. Maybe he put some zink layer on it later, but that makes the risk of the underneath corrosion and maybe a bubbles anyways. If there's any fellow general mechanic and you know what is he doing, please tell me. I'm curious a lot.

Your all videos are amazing but CAN YOU please MAKE THAT WATERMARK on both side of video less distracting.?

That one guy missed a spot...

excellent ..

Add some music for the background. I am sick of that melody. Have to watch with sounds off.

where's green cable in the thumbnail?

can you just one of these videos but without talking :)

this is how pizza in ohio is made 6:42 (kidding) LOL

That builder who's using that wire thing to str8 a wall out is a cowboy rather than trowel the wall just scrap it off look the wastage on the floor . You cant use that again if there any small stones or crap on the floor all mixed in dam lazy work there .

It's so bad that you use 1/3 of the screen only!

3:50 sorry, that epoxy flooring looks awful

So cool (=