They have one of these that fits the G20 as well. I personally think having a G40 with a folding stock, vertical forward grip and a non reciprocating red dot would be an excellent PDW.

I would count the fact that you need to do the tax stamp to run it as a con

This is my perfect home defense night stand weapon

I run mine with an Aimpoint Acro p1, so I can get lower to the bore. Also I don't have a forward grip on it, since I carry it in a holster, but I imagine that would be nice for controllability. Nice review. Greetings from Switzerland

Glock 18 with this🔥🔥

Great video man. Thank you for the info

Great video! C&H Precision made me a custom plate to slide over the ACRO footprint which the Holosun 509T then clamps to. It brings the optic much closer to the chassis and gets rid of the plate-to-plate to optic problem. Definitely worth checking out. Let me know if you want more details!

I wish there was a trigger cover in case I want to use a sling instead of holster.

If they combine the flux brace with this chassis this would be a almost perfect combination

Nice video I'm considering getting one so thank you for the good review. The only thing that I noticed is there doesn't seem to be any way to get a light on the gun if you are running a forward grip which sucks. Other than that seems great. Also for the Korean mags, I know it's a year later but did you try using a mag loader instead of your fingers? Mag loaders usually do wonders for mags with tight springs.

I wish they would put a small pic rail on the left of the frame for a light as most people would prefer to have a vertical grip installed.

A brace version would be nice

Love the videos keep it up man

YUT!!!

It’s like since re8 everyone seeing this thing

This would be great with my G24 with the ported "C" barrel

Does the charging handle reciprocate? Nice set up....

Do you still have room for a gun light? If not, how long does it take to swap the hand grip with a light?

I’m building the same setup you got there. I’m having a problem with my Glock 34 Gen 5 MOS slide to completely move forward after racking. I think the MOS plate is a bit wide at the top and it’s rubbing against the USW and preventing the slide to go forward. I remove the MOS plate and replace it with a Trijicon plate and it seem to work better. Do you have same problem I’m having? I’m thinking of sanding the inside of the USW down a bit.

heu nice vidéo do you have a link to the front vertical grip I want to biy one so bad (intl shipping if possible)

I need one for HK vp9?

I do not own a chassis, but studying of the choices, only reason I'm thinking of one is the much more accurate shooting, I am leaning toward B@T USW-G Glock 40 mos 10mm I like the trim looking design, I prefer the red dot mounted on chassis, Only thing I don't like is letting ATF to be involved selling tax stamp but I know I would have to do that because of the stock, reason I have almost decide to do this I'm at the age I need to go light weight deer hunting and this is the reason for 10mm, I would not install a suppressor to close quarters, suppressors back up after few shots you wouldn't want to be breathing the exhaust, that why I would get a 9 inch threaded barrel and use a muzzle brake just get more velocity less recoil more accurate shots, magazines would have to be according to most states 10 rd mag 1 in the chamber with this little rig I could easily pack it and maybe reach out max range 115 yds for kill., for self defense I'd use 15 rd mags in 10mm that lot of fire power with quick exchange, besides I would not have to tell the court oh yea I was all set to take that guy down with 33 rounds, or drum 50 hollow points, they would hang me, so I'll stick to common size mags for safety 2 or 3 mags of 10mm WOW when two in chest one well place shot in face all it would take remember you are just going to be no more than 1 yard 2 yard maybe 3 yards in taking someone down to protect yourself or family, that why everyone should use a shotgun.

When you submit your SBR tax stamp do you have to state the overall length, including the barrel, and does that mean you can’t later get a threaded barrel for a suppressor?

Can you run suppressor hight rear sights? I already have trijicons on my Glock.

Can you tell me how long the front pic rail is ? I am looking into what grip to put on it. Thinking A3 tactical GHM9k grip which is 2.75 inches long. Thanks

Did you have to engrave the Glock frame? That’d be a bit tricky

Where’s the best place to pick 1 up? And I need to SBR The chassis?

Where can I find one of these chassis? I’ve been looking all over and no luck.

This should in fury fit a zev 0z9? Where did you get it, having a hard time finding one in stock

Can't find these chassis available anywhere 🤔🤔

What vertical grip/hand stop are you running on that?

will this work with the 17L? can it fit a switch back plate?

Where did you find the picatinny baseplate to mount the holosun 509T? Thanks, Chris

It’s a hand that talks

i would love to find a way to mount a light and a foregrip

i thought you werent supposed to have a vertical grip on a pistol?

Is the stock as flimsy as it looks?

I just ordered mine. What foregrip is that in the video?

Someone installed on the pistol the rear switch? If yes how use the swiching pin? I guess you ad to do some machinery work on the frame...

If you need to take apart to clean the Glock do you lose zero?

I have this but can’t figure how to remove my glock after I installed. Can you give me some hint? I threw away the manual.

I’m curious if this would work with a Glock19

What’s the best way to remove the charging handle?

What grip did you use?

In my experience no afterMarket Glock mags are good. Even pmags have issues in the cold weather

Did you SBR the Glock or the Chassis kit?

No potentiality for a light?

Any reliability issues; mine stovepipes nearly every round 😢. (34 Gen 3)

How far can you comfortably shoot this gun?

Is there an aftermarket brace?

Can this usw-g be used with zev oz9?

fit on p80?

Any issues with jamming because mine keep jamming

Where did you engrave it?

How do you solve for a light?

I usually don't thumb down videos

Glock 45?

cool rig but your hand goes in front of the barrel when you are removing your sling. I would go with disposable or velcro retention. ND's suck so much worse when you shoot yourself. everyone is gonna wanna play with the cool glock. bad idea to make a bunch of finger manipulation in an area that goes bang. I would go holster over sling for this bad boi.

Vertical: 90° perpendicular to the bore. That is not a VFG; it’s angled.

So.. you can spend 400 plus the tax stamp on this thing but you can't let a fellow enthusiast try it out.. wow...

Ok, the 7-8 “pew-pew” sound effects in the intro with your voice getting higher and higher as you say “pew pew” was a bit cringe. I more then likely would have enjoyed the video and have it a thumbs up UNTIL you dug yourself a grave 3/4 of the way into the review when you start your rant about how you enjoy having something @ the range that nobody else has. (To your credit, I call a spade a spade and agree it is a cool factor that could have went with out saying but all good). You OFFICIALLY catch the TOOL BAG AWARD OF THE YEAR is when you actually have the stones to blurt out how guys at the range come up in amazement and possible ask to shoot your gun and you turn them away with their tail between your legs all bc ammo is “so expensive”. Seriously bro? You do not neglect to mention the WORTH of your give-always and beg your viewers to Like, Comment & Subscribe but you have a prob letting a fellow shooter at your range pop a couple rounds down range and possibly make a legitimate friend and grant them a highlight of their day? Tool-bag, Tool Shed Move.

So, you spend on all that and buy knockoff mags SMH

holosun is trash, buy rmr

Korean glock magazines have always been inferior no matter what capacity or brand. Imo Koreans just don't have enough weapons manufacturing experience to make their glock magazines up to meet the standards customers are used to with other after market glock mags available in USA.