Save $1200 By Fixing This Common BMW Scraping Sound Yourself

Save $1200 By Fixing This Common BMW Scraping Sound Yourself | F30 Parking Brake Cable Clip

Рет қаралды 35,304

Жыл бұрын

Do you have a scraping sound that seems to be coming from the center console in your BMW? Today we're solving that very annoying, and very common problem that can affect many BMWs from 2010-2019.
Retaining Clip: www.fcpeuro.com/products/bmw-retaining-clip-34406854898
I am (unfortunately) not sponsored in any way by FCP Euro. I have simply been using them for years to source quality BMW parts, and have never had an issue. I highly suggest utilizing them for any DIY projects on your Bimmer.

Пікірлер: 113

@TRocksGarage777 9 ай бұрын

I had the exact same problem on my 2016 328iGT xDrive while accelerating around a right hand turn. The dealer wanted $1500.00 to fix the problem. I actually fixed it with 4 zipties. I tied each parking brake cable up to the rear frame and it's been holding for over a year now. Great video and respect for going the extra mile and installing a new bracket. Now I know if the cable ties ever break where to install the bracket. Love the creeper cam, very cool! By the way Im located in Florida and the dealers are not so kind.

@adebamboallinson5110 9 ай бұрын

Did you have to drop the fuel tank and the heat shield?

@TRocksGarage777 7 ай бұрын

@@adebamboallinson5110 no, not at all.

@ronschwartz5117 7 ай бұрын

Same repair 4 zips on my 17 330i xdrive F31 touring

@BUDF0X7 5 ай бұрын

I was going to duct tape mine, but going w zip ties now!!

@SilentEscape818 5 ай бұрын

Ya until you go to use your E brake & they snap! 😂 happened to me

@DiegoOliveiraProf 9 ай бұрын

I went to a friend's auto shop yesterday and asked to use his elevator. I just put a ziptie and the problem was solved. Thanks for this video!

@NJFPV Ай бұрын

What did you tie to? I'm under my car right now... I can't see how a skilled mechanic with the right tools can't replace this without removing anything. The nut is tight, but it's accessible. I could get it off if I wanted... But maybe there's more to it that I'm not considering... Oh, realizing I'm under an F22, not F30 like in the video...

@therealcarlchao 7 ай бұрын

At this point it should really be a class action lawsuit. So many videos and forums discussing this annoying issue that costs way too much to fix.

@chrispedraza4140 6 ай бұрын

Yo set it up brother I’ll sign. I just left my indy mechanic who just fixed this very issue. The “death rattle” is horrible! Killed enjoyment of the ride. Cost me $63 after showing him a 2 min video on how to do it. He’s background isn’t bmw, but Audi. I can’t believe others have quoted $500-1200.

@therealcarlchao 6 ай бұрын

@@chrispedraza4140 Yeah man I get the amount of time this could potentially take but it should actually be a pretty quick job for a mechanic with all the right equipment. From what I've heard the stealership always charged $1000+ - absolutely insane. Not sure I have the time to organize the suit but we shall see...

@mannisingh4950 4 ай бұрын

Yeah honestly at this point it’s ridiculous. 8/10 F30 owners I know had this issue and the dealer says we charge $1600 + tax to replace the bracket, absolutely pathetic

@antediluvian_seance 8 ай бұрын

Well done. Thanks for the demonstration. I have the exact issue right now on a 328i 2016.

@user-hi7ke3yp9f Жыл бұрын

Use long zip ties and loop around to sub frame problem fixed.

@bobholmes9520 Жыл бұрын

Exactly, my independent BMW shop found this problem when I had my 2016 328i in for an oil change and brake fluid change snd fixed it at no charge.

@Gutterruns 11 ай бұрын

What I did 😂😂for time being

@stanislavjohn6156 11 ай бұрын

Was gonna say the same

@simca554 8 ай бұрын

Zip tie would probably last longer too.

@emilsierra3309 6 ай бұрын

Great video! I have a similar noise on my X5 so I’m fixing to get under it to see if hopefully that is the issue.

@mbonet 7 ай бұрын

Amazing video! I have this exactly problem in my 2016 320i Thanks a lot!

@Stockish_Daza 8 ай бұрын

took 10 minutes on a lift to fix, 18$ from local bmw dealer had it in stock. I dealt with it for almost 7 months thinking it was tires rubbing because it started after i swapped wheels and tires lol. kept messing with ride height, camber, and playing with the fender liners than randomly found a youtube mentioning this. What a life saver lol

@len8140 2 ай бұрын

10 mins ? I was told it’s a 3-4 hour job

@Stockish_Daza 2 ай бұрын

@@len8140 literally 10 minutes lol

@DeuceJhay 7 ай бұрын

You saved me that amount as well thank you, it was driving me crazy and only been like this for a week now

@frostyb6438 Жыл бұрын

Great video, I’m digging the POV camera view! Also, is that a seiko GMT 5 on your wrist? I just picked up one a couple months ago and love it. Got the blue dial which matches my estoril 335 👍⌚️

@yodersgarage Жыл бұрын

Thanks! And it's a JDM Diver, but I'm very seriously considering getting a blue GMT!

@miketigerpool 20 күн бұрын

I just finished this work and is impossible to slide and place the screw without remove the fuel tank support, 4 bolts. This is a nightmare if you are alone. All videos around KZfaq does not show you how to place and slide the part. If you need more details I will support you. I use 6 hours to complete the job properly.

@DiegoOliveiraProf 9 ай бұрын

thanks man, this noise is avoiding me enjoying the car... I want to full trottle! :)

@zorantb Жыл бұрын

If you want easier installation and a more "permanent" fix get the AGA Tools Park Cable Clip Repair Kit (AGA-PCC-854-898) instead. It does cost $130 though - but it won't break anymore.

@jeremy8517 11 ай бұрын

@NJFPV Ай бұрын

$25 ebay

@hubixl7001 2 ай бұрын

Thank you so much, have that problem on my 4 GC (F36). Feeling confident I can fix it now 😁

@yodersgarage 2 ай бұрын

You've got this!

@allDavestunes 10 ай бұрын

hey man..good vid... glad you sorted it... I just found a leak on the front shock Im goign to tackle soon.. keep the beemer content going.. Imy building an old for as well. in australia............ how do you rate the lift..? I have a 2 post hoist in my workshop.. but could use one of these at the home garage formy 3 series...and other cars

@yodersgarage 10 ай бұрын

Glad you liked it! The Quickjack lift is great for a home garage, especially if your only alternative is jack stands. Like anything else, just make sure you set it up correctly.

@mikepulido1721 Жыл бұрын

Bang on! About to tackle this as well. AGA tools makes an all metal one so you only have to swap it once. Just ordered it. Thanks for posting the video!

@yodersgarage Жыл бұрын

Good to know! I'll have to swap to the metal one next time it breaks

@JeeperZJ 11 ай бұрын

@@yodersgaragethe best part about the AGA part is that you don't have to drop the gas tank to replace. You lower the exhaust and driveshaft (unbolt the center carrier from the chassis) and pop the old one out and slip the new one in. They have a video for the install.

@NJFPV Ай бұрын

Same part all over eBay for about 25 bucks, just fyi. No reason to pay the $125 - 200 I've seen from various shops. Crazy ass bmw tax from those gougers. It's 2 pieces of metal, tubing, and a screw. Fouttahere with that $125 noise...

@wagoneer401 Жыл бұрын

Can you provide a link to the lift you are using? Great job on the video! Thx.

@yodersgarage Жыл бұрын

Sure thing! Mine is the Quickjack 5000slx, which I'm not sure they make anymore, but they have other comparable models. www.quickjack.com/memorial?gclid=Cj0KCQjwjryjBhD0ARIsAMLvnF_9YSHIuRPB9oKCY0Cn_nmMNpu1J8rsq91X66qVWdr-VLH8mvhUFpYaAhr8EALw_wcB

@mxtracer459 2 ай бұрын

I just fabricated a bracket out of aluminum stock that holds them up without having to remove the old plastic bracket. No removal of anything besides the one nut. Bolts up with the existing bracket nut.

@desertspectre2881 7 ай бұрын

Bro you’re a commando I wish I could do that but nah this is something I go to the shop for 😅

@RamessesIll 4 ай бұрын

Man i feel like crying, this noise has been annoying the fuck out of me for the past couple of weeks now and as a car enthusiast, i cant stand any rattling or any noise that i cant locate. I was going insane about finding it. Thanks for your video

@xyzspec82 11 ай бұрын

Use jack stands!

@brendanoneill554 Ай бұрын

I appreciate the video. I have the same issue. Would it make sense to cut the heat shield with a snips or power shears to access the clip? And then just patch it back up with a couple of pop rivets when you are done?.

@yodersgarage Ай бұрын

It's definitely possible without cutting anything, but it would probably make things easier

@davidb321 8 ай бұрын

I was quoted $1400 at my BMW dealership a couple weeks ago! CPO does not cover plastic clips.

@chrispedraza4140 6 ай бұрын

What a phucking joke. I love BMW pre 2018. But what’s really being discussed in those board room meetings. greedy pigs. The new grill and design makes it easier to not buy from them in the near future.

@mattgreer2242 2 ай бұрын

Spent last weekend doing this on my F31. I’m unable to latch the new bracket to the brake lines. Any trouble or hints you can suggest? The brake line diameter seems too big.

@yodersgarage 2 ай бұрын

It's definitely a tight fit. I had to get a long crowbar with a handle (a big screwdriver would probably work too) and get some leverage on it at just the right point.

@joespittle1 6 ай бұрын

Did you ever get a squeaking/chirping noise when yours failed? I've only heard of a few others having the squeak that I have. I had the grinding sound the first time around and now it sounds like there's a bird in there

@yodersgarage 6 ай бұрын

Nope, mine never made a noise other than the grinding

@hzt9295 3 ай бұрын

I had that chirping noise when mine broke.

@MikeyMeM3 11 ай бұрын

If you don't do anything does it lead to further problems?

@yodersgarage 11 ай бұрын

Given how rigid the line is I doubt it'll lead to any problems soon. It could probably eventually wear through the sheath on the cable though.

@patriciaf5338 9 ай бұрын

My BMW service told me $1130 and if I don’t correct the problem it could cause damage to my drive shaft. Is that true? Aldo what happens if I don’t replace it. Thanks for the help Patricia

@yodersgarage 9 ай бұрын

I wouldn't worry about it damaging the deiveshaft at all. The cable isn't large or heavy enough to do much other than make noise. If you don't replace it it'll just make noise for a long time and maybe eventually wear through the sheath on the parking brake cable. If you don't want to replace the part yourself or pay someone to do it you can zip tie the two cables together and solve the problem very inexpensively.

@jesustrejo9870 9 ай бұрын

Im a bmw technician and I've seen these cables distroy the seals in the differential cause they hang low and get tangled up with the drive shaft I replace these clips almost everyday

@yodersgarage 9 ай бұрын

That's good to know! Are more serious problems common on specific models?

@irickyricardo89 4 ай бұрын

Where did you get the thing where you lift the car ?

@yodersgarage 4 ай бұрын

It's made by a company called Quickjack. They sell direct from their website, but I sourced mine from Costco.

@killacuz3 2 ай бұрын

hey man awesome video....can you link me the lift?

@yodersgarage 2 ай бұрын

I got mine at Costco, but they're sold all over the place. www.costco.com/quickjack-5000tl-portable-car-lift-bundle.product.100833721.html

@killacuz3 2 ай бұрын

@yodersgarage Thank you my good man

@IdkIdk-xp2kf 8 ай бұрын

Do I actually have to take all that stuff of to reach it I feel like I wouldn’t have to

@yodersgarage 8 ай бұрын

You need to be able to pull the tank down if you're actually replacing the clip, which requires loosening a lot of things. If you're just zip tying you probably don't have to remove anything at all.

@navarrov 2 ай бұрын

I'm dealing with this right now, estimate.. $1102.03 just crazy. Luckily mine doesn't make any sound

@Youtube_ban_me 4 ай бұрын

Does it sound like a super charger? I think i have this issue

@yodersgarage 4 ай бұрын

Mine didn't sound anything like a supercharger. More like scraping plastic.

@jamesmccallion4526 5 ай бұрын

BMW screwed me over with this and said my car needed a drive shaft, I found that the tech zip-tied the brake line back up into place

@markonincevic2268 11 ай бұрын

Tnx man i was going crazy with the fucking sound

@yodersgarage 11 ай бұрын

It drove me crazy for like a year!

@aleksankazakov 9 ай бұрын

I tied do it, I dropped exhausts, the PROBLEM is the new part just wound NOT go in on a 4 series F32. The shaft and the cables get in the way, cant slide it in and put the tank on top of it. Either the lines or the clip its self on the way against the body and the driveshaft. Need to drop the driveshaft, there is no other way aground it. However, After everything was taken out and I was left with no option. Obviously I cant leave it as is, I had just cut a piece of metal, drilled a hole in it, rolled edges, bent certain way and bolted it over the tank and cables. The car is fixed, It works just as well as the BMW fancy plastic par if not better, obviously it wound never ever be broken #1 It supports the tank #2 it supports the lines and it costs , scrap metal rate 1 cent. Why BMW cant do that to begin with? Why to invent a whole fancy part with rubber gasket, inserts, clips that are more fragile than a zip tie. I am just surprised by this.

@myst0296 2 ай бұрын

I did this today on my F32 and had the same issue. I was eventually able to slide it in by removing the two bolts on the center carrier of the driveshaft which gave me just enough clearance… there’s no need to remove the entire driveshaft. Just a heads up for anybody doing this in the future.

@aleksankazakov 2 ай бұрын

@myst0296 a Year later I still drive without issues. My DIY bracket out of scrap metal holds it all well. No issue at all

@hooleespirit 7 ай бұрын

if he do it i can too

@Babyboysosaa Жыл бұрын

How much would you charge me for the same repair im located in California I have a 2015 328i sound is very annoying 😂💯

@yodersgarage Жыл бұрын

Lol, I barely have time to work on my own cars these days. Honestly, you could probably just zip tie the two cables together and solve the problem with significantly less hassle.

@Babyboysosaa Жыл бұрын

@@yodersgarage thank you appreciate it

@HoustonisFire Жыл бұрын

@@Babyboysosaa have a 2016 and I did the zip tie method. You have to remove the vent in the back to get to it. Took me about 30 minutes.

@JeeperZJ 11 ай бұрын

Just ziptie the cables to the rear subframe, theres a spot you can loop a zip tie through to keep the cable from hitting the driveshaft. No need to remove anything, takes 5 minutes.

@Babyboysosaa 11 ай бұрын

@@JeeperZJ will do thank you so much I still haven’t done it I drive drive around with the music hella loud so I almost forgot about it 😭

@theclarkhurley 6 ай бұрын

Has anyone done the zip tie fix ?

@joespittle1 6 ай бұрын

It worked for a few months for me. Getting mine done properly tomorrow. I had a squeak/chirp instead of the grinding both times and figured this was the issue, lo and behold it was

@SilentEscape818 5 ай бұрын

@@joespittle1How much they charge lol

@joespittle1 5 ай бұрын

My mechanic charged $230. His labor rate is $130 (Not sure tho), I provided the metal clip, it was about $130. My mechanic was based just south of San Francisco for reference

@SilentEscape818 5 ай бұрын

@@joespittle1 I just zip tied it to the frame and the noise is gone , used 2 zip ties looped it

@xllxHOBOJOE16xllx 3 ай бұрын

@@joespittle1 what’s the mechanic bro I live in San Francisco also

@lewh7 Жыл бұрын

Just fitted one of these Jesus NEVER AGAIN 🤣🤣🤣

@yodersgarage Жыл бұрын

Lol, I definitely have some new scars from this one

@EdA-bz3bu 12 күн бұрын

Amazed how much they make selling those cars and still not enough so they start on cheaping or on simple designs. Like “lifetime fluids”

@thomashazell9944 11 ай бұрын

Has anyone noticed more road noise since there’s has broke?

@yodersgarage 11 ай бұрын

I can't recall if I was getting more road noise after it broke, but there was no difference when I fixed it

@vadimgor8682 9 ай бұрын

I kind of disappointed in BMW. they are using very cheap not reliable components and asking a lot of money to replace those cheap parts. This is not only the problem I had. On the convertible roof the few bucks thread was torn, damaging the rear panel. BMW asks 4000$ to repair.

@yodersgarage 9 ай бұрын

Agreed, there are simple things where a little extra cost up front would save a lot of money in repairs.

@Djblaze337 11 ай бұрын

*looks up video for ziptie method

@yodersgarage 11 ай бұрын

Lol

@jonathanperez7636 10 ай бұрын

You got it?

@2Drezik 9 ай бұрын

save 60k, buy a Civic

@DemonzRUs 10 ай бұрын

Wow omg thank you I didn’t what the hell this was I thought it was coming from the back ac im going to fix this now thank you so much!!

@yodersgarage 10 ай бұрын

You're welcome! I was also very confused by it initially

@user-mx3be1jy8u 22 күн бұрын

I bet that is a California car? Definitely from a drier climate. Everything underneath is mint. I was going to ask what you were using to jack the car up but I saw the label - quickjack :)

@yodersgarage 22 күн бұрын

Yep, California car!