An hour and a half of content on a Sunday. I had big plans in the shop today on the cornbinder but the temptation to watch this right now is killing me.... Okay just the first 20 minutes..... 🤣

This reminds me of a memory of youth. When I was a 19-year old in 1973, I claimed an abandoned 1958 Pontiac Chieftain 4-door from our local airport parking lot. I inflated the tires, checked the oil, installed a used battery, poured in 2 gallons of avgas -- and the old girl fired right up. I drove her the short distance to our home. In a few days time, she was licensed again. The local Shell station mechanic snapped on a set of retreads, then installed a tune-up kit with plugs, changed the tranny fluid and filter, adjusted the bands and lubed all the zerk fittings. The Chieftain was my daily driver for a full year before I traded it and some cash to a local roustabout for his 1966 Mustang 2+2. He really only needed a commute car and the extra money allowed him and his wife to do some needed work on their kitchen. Ahhh ... teen life in a small town. THANKS FOR A GREAT VIDEO.

That's what I admire about you Brent, never let a vintage project/car be scrapped!!

Got to love the dash and steering wheel , just a classy look over the junk of today !!

You guys see that, right? First time in a long time that I've seen a guy show about oil over rings to increase compression. So if you have a high mileage car, leave your car for a year or two and she won't start with good spark..then maybe just oil up the rings. It works some times. Especially slant motors. There ya go, pulled it a couple a hundred yards and the rings cut loose. Bingo. That was a cool lesson, Brent!

That was awesome another one the scrap yard didn't get always enjoy when you bring an engine back from the dead

This guy is amazing and inspiring. He just gets work done, time and time again. His passion for the hobby is unsurpassed.

Right on man. Love it! Another one saved!!! Pablo is such a sweet pup

Perfect Sunday, morning in my case: Halfass Kustoms, long video, Brent's optimism. good humor, patience, and one of the best parts - a ride with Pablo.

I know you have lots of projects, but this one needs to be fixed, shes a sweetheart. Cheers.

I live in the UK but always had a great passion for American cars. Enjoyed every moment of this amazing video. Brent's skills are truly awesome, a good humoured unwavering genius. Just the person I need as my mechanic.

This is the amazing part about old iron, it was made to last! Here you have a 60+ year old car, which was probably left to rot on a field for at least half its life and you can still run it and drive it with "minimum" work on it. Awesome! Cheers from Argentina!

I loved that you saved this car from the crusher

Brent the possibilities are endless You Gotta put a floor in that one!

Awesome car, I had a 1958 Pontiac Chieftain when I was a teen in the 60's. Good old Kroil and Marvel's Mystery Oil.

Best music on you tube! Some cars just don't want to be back on the road and will fight you the whole way. This is one of those.

The X frame with the “floor delete option “. Brent, you crack me up!

She's definitely a keeper, All the important bits are still there that's a rare thing indeed. I dig it! ✌🏻😊🇺🇸🇨🇦

Watching this got me in a good mood. Thank you.

I want to thank you for taking me on this journey reminds me so much of my youth i had a 57 chevy no starter i could push start it myself bye . But it was sure ruff when you went down town you got in a tough parking spot

A very good thing seeing these pieces of history being rescued..if I had the means I'd be doing the same. Used to do full restos but the satisfaction of just getting them mobile is great.👍

I'm more of an Old's guy, but for a '58 GM car I would pick the Pontiac. Pontiac got the trim right on this body, and those taillights are pure awesome.

Very stylish design. The coves on the rear quarters somehow make it look like it's a two door, even though it's not. With all that nice glass & trim intact I hope this one gets a new life, not just used as a parts car.

Still can’t say enough about your understanding these cars. The Pathfinder is a looker at a distance. But if there’s anyone who can make her choice again it’s you. Enjoyed this videos as all yours. I’ll keep watching for sure. Blessings, Terry Eustice

I really had doubts about that old Pontiac 6 cylinder ever running.. Your persistence on these old cars continues to amaze me. Now all you need is some 58 chevy 4 dr floor and trunk pans. But knowing you you will fab all those parts in your skillful way. Thanks for your videos and knowledge.

I know what those piles of seat padding are all about all to well, the worst part of cleaning a car or truck sitting for years is the mouse and rat mess, love that Pontiac, what a score.👍

This car brought tears to my eyes .. I was born in 1958 . middle child and this car brought me to tears .. as you described it .. "I like it" . made me cry... thanks for rescuing her . she's worth it!

That is one of Pontiac's best looking cars ever. I miss the windshield coming back almost to my knees. The front bumper will break your ribs if you get under it and let go.

This is one of your best bring it back alives yet.

Pathfinder must have been a Canadian model. We had a '58 when I was a kid, and the fuel pump went on it on a trip from Wva to NY. Had to spend the night in a diner. I still remember my Dad saying "it's got 85 thousand miles on it, and that's when stuff starts to go". He traded it in shortly thereafter on a '62 Catalina.

I love how you never give up on a engine and always get them running if they remotely can. I love your channel and everyone of your videos. Just remember you always have a friend right here. I live in Ohio but I sure would come up to Canada to help you fix your cars anytime you want me to. I would love that.Keep up the great work and God Bless you and your family.

Honestly, even as a more door its already hot-rod esque.. Thanks for the video Brent!

Loved seeing this rescue. Would love to drive a car like that, someday. I love the work that you guys do and I hope you know that you are appreciated.

Another great find and save. Canada seems loaded with old iron. Rusty but anything is repairable. In Arizona no rust but hardly any old cars lying around. If you do find something you have to mortgage the house. Go figure. Maybe I should have stayed in Chicago. Love your channel.

My Grandpa was "Max" . His 58 Pontiac looked just like yours. He survived a 1962 Tornado inside it. It was really sandblasted, but survived. Great videos Brett.

The smile on your face and that chuckle when ya got her to fire over on the tow jump says it all. What an enjoyable adventure on the ol'58 Beautiful Buick.

What sweet lines it has,definitely a keeper,giver her a name and I think it deserves it's own playlist on a rebuild :)

Truly interesting to learn of Canadian versions of vehicles. Had a friend that had a Beumont "looked like a Chevell and a pontiac had a baby. That is a good looking car and relatively solid. So glad you saved it.

5:56 "We'll look at it someday. Just not right now" ... My immediate reaction was. "Riiiight" and a few days later it's Pablo approved. Good video/story, as usual. :)

My beast friend’s dad had one of these back in the 60’s. Same color but a 2 door. He used to lean back while driving and always had one of those Clint Eastwood stokies in his mouth, so cool.

the chain wrapped 2 time though an old tire,, in the center of the chain ,, big shock absorber .. ,,,,,GOOD VIDEO ,,, Thx Ed Loretto Ontario Canada

Classy chasie, can't wait for you do your magic .

You are just amazing, so tenacious and crafty, God love it, you just saved this old boy. Wonderful video thank you so much for sharing. Take care, Dennis

Always a pleasure to be a spectator in your adventures! Working on a '56 Packard Clipper myself. Putting an '81 Caddy chassis with a '75 Caddy 500 motor. Quite a project but having a great time building it! Keep the "saves" coming!

Saw this car in your last video, figured it wasn't yours. This Pontiac echos the '58 Chevy a bit. The windshield and front end. Great find!!

Ya we like the old "Tin Indians" - I've often thought about putting a X frame car body onto a perimeter chassis - just never got around to it - you know we'll all tell you how to do it - It's just fun eh?? - Our leaves are beginning to change here in Lethbridge as well.

Great save! It's a shame so many cars like that end up getting crushed because they are deemed too rough or undesirable. Thanks for giving this one a second chance to retire with dignity. Maybe one day someone with a welder and more time than money can patch the body up and make it into a fun beater.

What a great looking ride ,loving the trim and style,she runs nice too .Hope we see more of this pathfinder.Great content as always Brent .

She’s a keeper. I would like to see you revisit her. Chassi swap, rust repair would be worth a few videos. 😁. Interior clean up too.

Im not a 4 door type of guy but for some reason that ol Pontiac just screams bad ass

New viewer and I have to say you have more patience than most. I'm glad to see a classic saved from the crusher and running again.

As a kid in ontario,my dad had a 58 chev biscayne in the mid sixtys.Already the floors were going and the headlights were falling out of the fenders,us kids called it the flintstone car.Those cars were bad in the salt belt for rust.I remember a mountain of those fiftys cars at stelco in hamilton getting recycled in the steel mills.

The 58 looks pretty good glad you got her running and driving

Marvel Mystery Oil can be found at Canadian Tire, never had much luck with that stuff, would like to try the atf/ acetone/ diesel mixture

Can’t believe how complete and clean the car is. The engine bay is relatively pristine and all the external chrome trim is complete.

Nice save! She deserves one more go. 👍 Thank you very much.

Great watching the old iron come to life. Love the lines on this one

WE LOVE THESE OLD REAL AMERICAN CARS / TRUCKS ..

Lovely lines on this car. Pontiacs and Olds are my favourites from this era. My parents drove a '57 Pontiac when we lived south of Winnipeg during the late 60's - awesome car. Loved it when that stuck lifter released itself.

Love the chrome arrows (or jets) on the front fenders, and those tail lights. That car is huge LOL. Amazing the glass is intact as well! Marvel Mystery Oil works great. Thanks for todays entertainment and education Brent.

I'm liking that a lot, looks awesome. Well done getting it running and driving, I knew you would 👍

Great video, didn't think you could bring that one back. You just never know what you will see on this channel, that's a good thing.

As the camera turned, I caught a glimpse of a Volvo PV544 and it made me wish I lived closer, so I could try to sweet talk you into selling it to me. I had a white '60 for many years and it's one of those cars from my yoot that makes me smile and stirs a pile of fond memories. For instance, I met my future wife in the car next to me at the local drive-in burger hangout in 1964. If I'd had an ounce of good sense, I'd still be driving it, but now pushing 77, the smiles and recollections will have to do. Still.... Rock on.

That Pontiac is cool, exterior is so complete. It must be worth it to do a chassis, and new floors. Pablo was sure giving you some lovin...Happy to be going riding.

Way to go! a nice addition to your line up.

A man and his dog is a beautiful thing good content every time !!

love seeing the old ones come back.make them look the way were new.breaks my heart to see them cut up.thank you.

The Pathfinder is saying I hope you can find a way to get me running. Good old Pontiac. 😎👍🇨🇦

I wish I lived closer to you, I'd come hang out every day and bring plenty of cold snacks too! 😁✌🏻🇺🇸🇨🇦

Omg Brent so many laughs...the backfire made me jump too n laugh, and the jolt lmao I thought you were gonna end up in the back seat lol. Man Pablo is a star lol and them big ol scooby kisses lol. Hell yea that's a Winner Winner chicken Dinner looks awesome and seriously for you to put a floor in that would be a piece of piss...lol As McD's says "I'm loving it". As always Brent thanks for the giggles n sharing...till next time "peace out" ✌

Great video! I am learning more and more from you on motors and soaking it up like a sponge and thank you very much. Another educational video on good automobile motor knowledge and understanding the workings from the inside out. Makes me want to buy an old car with a lock up motor to get it a try.

Love this ole classic car, she's nice, love the front end its looks like a beast, the dash the chrome the windows curved windows side windows the thing just looks cool as heck. I see why you like this one so much Brent. The car looks so much better just with wheels alone.. Your a master mechanic at bringing these ole babies back to life.

So much fun, glad you didn't give up on the old girl!

Brent,man I am digging the ole Pontiac!! I would definitely try and fix the floor and trunk pan delete 👍 she is a keeper!

My Dad was a Pontiac guy an i really enjoyed this video,,, thot of him all thruout and enjoyed it very much,,!! Thank you for the memorys of him,,!! He would have loved to got this car from you an fixed it back up,,!!

Wow. What a project. But! You are indeed the right guy for the job, you tinkered with it, got it running, and no doubt you'll have it road worthy and up and running, love to what you do with it.

That's a sharp lookin rig!!

Liked the video soon as a guy clicked on it!!! THANKS BRENT!!!

I really appreciated this video. I live in California and own a 58 Pontiac Starchief. It’s been sitting in my garage for 20 years and was sitting in a field for 7 years prior to that. I’ve had a plan to get it running and even do a lite restoration to make it a decent looking & running driver. Trouble is, life/work/lack of knowledge has gotten in the way. You’ve got great practical knowledge, built over your lifetime. Spray oil here, put ATF in there, feed jury-rigged gas line from tank in passenger seat, use screw driver to arch coil(?) to start car etc. etc. What is like 1st grade math to you seems so complicated to me. THAT’S AWESOME and I’m envious! I work in the finance world, but love tinkering with family autos. During COVID I even attempted my first clutch repair (love KZfaq) - it was a success, but I realize how timesaving it is having the proper tools! Took me 3 days just to remove top bolts from transmission/engine & separate and lower transmission (used a car jack with a half-ass jig I made to hold/secure tranny). You’ve motivated me to finally get all crap that’s piled up on it over years (X-Mas/Halloween/furniture/kids & family stuff) and start to work on it. I WANT to do some of the engine work, body work, understand the electrical… I don’t want to spend a lot of $$, but I also want it to run well and look good! Maybe after all is said and done, I can keep costs to a few thousand bucks while learning maybe 1% of what you know! Thanks again for great video! Terry from CA

you never fail to amaze me with your knowledge and the way you work on everything knowing it,s place in the whole set up,when you open up the hood on these rust babies what you see would make everyone else walk away,you begin your magic and we have a car,your channel is pure entertainment for me,I would like to see you do more doing the whole nine yards and producing a stunning machine,take care and stay safe till next time

Nice rescue. Looking forward to seeing what you do with it.

another great find.

As always. Good manners, simplicity, fun. You're a great guy

Good music, nice 58 Pontiac, that Blondie music with your dog no excess just perfect. 🙂

Love that model. In the late 70's I was hesitating between such a Pontiac and a 67 Firebird. Unfortunately the bird won ... :-/

Everone has 50's Chevy's and Fords. I have never seen the Pathfinder before. If you could fix that one, it would be a keeper for sure!

Always enjoy your videos, because of your sense of humor😁. Thanks for the knowledge and laughs😂. Cheers from NYC🗽🇺🇸

Thanks for the shoutout man! If the brakes aren't unobtainium then just whip out the torch! Time is money! I dig all the old Ponchos with Chevy motors you find up there in Canadia!

Great old Pontiac. It took a little work but sure seems to run nice now. It sits nice 👍

Good choice, love the Pontiacs

I gotta tell ya….. of all the cars I have watched you work on, this is my favorite! I love the body style!

Oooohhhh nooooo! Don’t relegate it to the dead line! I saw a lot of really neat projects on Your place. I did up a ‘59 Apache. I loved it. I can’t believe I let it get away. But I’m not young anymore. Got my hands full of the one project. Thanks for taking Us along for the ride! Even without brakes.

As soon as I saw the rotten under side of the car, I thought to my self I hope you do a chassis floor swap. It would be a great project.

What a beautiful car. Any cars available here are way expensive and way expensive to fix. Just love seeing you do what you do. Like to see this one done has so much appeal.

I love the old dog sitting patiently there just waiting for a moment of quality time with the boss.

Unlike other channels, you always get them running!

Would love to see ya do more with this one.

Yeah, options. Do you want to spend 30 hours fighting to remove one wheel?? Meh, nah... Great candidate for a builder!!! I know,,,, it's easy for us viewers to say build this, why not do it this way... By now I hope you understand I ask questions because I don't know. This '58 Pontiac seems a good builder, BUT, it's YOUR time, effort, supplies and money.....the styling echo's the '58 Cehv, but how many '58 Pontiac's are running around??? Your choice, naturally! Keep up the great work, builds and videos!!!!!

Another awesome save. Can't wait to see what you ultimately do with this one but with your ideas and skills I just know this car will be roadworthy for a long time to come.

Awesome video, bringing back a 1958 Pontiac from the grave yard to the future of a great mechanic and driving her around the farmhouse. Thumbs up.