Chipping Large Wood with the Woodland Mills WC68 Wood Chipper.

No video

Chipping Large Wood with the Woodland Mills WC68 Wood Chipper.

Рет қаралды 39,449

Күн бұрын

Well I can tell you one thing, the work never ends. Here I go again making wood chips fly with my Woodland Mills WC68 and my Kioti DK40se hst. In this video I put some larger trees through the chipper and make them into chips that I will be using to cover over my trails. If you're looking for my detailed review of this chipper, be sure to check out my playlist in which I detail the ups and downs of this chipper after a year of ownership. Although the chipper is a solid running unit, check out how I struggle when the wood is really rotten. Despite this minor issue, the chips keep flying as the kioti doesn't skip a beat. Here we go!
Woodland Mills WC68 Wood chipper
woodlandmills....
**for business inquiries, please email sawingwithsandy@gmail.com **

Пікірлер: 57

@raybloom5727 4 жыл бұрын

I have the WC88 on a 57HP Kabota. It is by far my favorite attachment. The only thing better than watching you chip wood is doing it myself. Brings a smile to my face every time!!!

@sawingwithsandy 3 жыл бұрын

I'm with ya on that one Ray. Sure is great time out chipping. Sounds like you've got a great setup going there.

@jamesbainton 5 жыл бұрын

It is really nice to see what happens when you put through the old fir trees

@sawingwithsandy 5 жыл бұрын

Yeah the fur trees give some nice chips

@Mike-bj9zg 5 жыл бұрын

I have the same chipper, best bang for the buck! I’ve operated larger, more expensive chippers and experienced problems with them. I love my woodland mills chipper.

@sawingwithsandy 5 жыл бұрын

I'm with you. I'm happy the woodland mills has been as good as it is.

@Andrew_From_NB Жыл бұрын

Lots of good chipping there! The old DK working like a champ! Great vid! Cheers!

@sawingwithsandy Жыл бұрын

Doesn't even flinch it seems

@Andrew_From_NB Жыл бұрын

@@sawingwithsandy the tractor enjoys workin with ya 😜

@matthewtaylor2185 3 жыл бұрын

I like chipping half rotten wood in my old 18hp DR chipper because it is already close to compost. If you put some of that in with some fresh green limbs and grass clippings, it makes lovely compost. Only problem I have is it can take it in so fast that the machine can't blow it out fast enough, or it smacks the hopper and breaks off...it can go flying because the hopper is so short on this machine.

@foggyvalleyacres Жыл бұрын

That made a pile of chips quick! Hopefully the wc68 will be my next purchase, I have a manual feed chipper but having the hydro feed would make a world of difference.

@sawingwithsandy Жыл бұрын

Is a great tool for my sawmill for sure. I"ve got a good pile ready to go through the wood chipper right soon. This unit sure has had some miles put on it

@gillbujold1918 3 жыл бұрын

This is the same chipper I’m looking at. I have a DK45HST and wondered how it would handle. Looks like it’s a great fit.

@nixonkutz3018 Жыл бұрын

Like many of the comments here I am planning on getting this chipper - thanks for the info

@sawingwithsandy Жыл бұрын

I really enjoy mine for sure

@jeanvaljohn3921 3 жыл бұрын

Good info, good job wearing your ears,

@sylbebe 5 жыл бұрын

I enjoy your videos with the chipper, I recently bought a WC88 after watching your videos. I would like to see what it does with wood slab from your sawmill. Continued your good videos.

@sawingwithsandy 5 жыл бұрын

Glad you're liking the videos. I've got quote the pile of wood off cut slabs piling up so I'll be chipping them in not too long.

@dmaifred 4 жыл бұрын

I'm about to buy one here in Australia. (Born in BC) so had to support

@cindyb5462 Жыл бұрын

When you and your dad were using the wood chipper if you had a chainsaw or axe and split down the middle maybe 👍

@doughayes9141 Жыл бұрын

We ordered one and took delivery this week. Looking forward to assembly and 1st chips this weekend. Any suggestions on infeed roller setup? You seem to have the least amount of feed issues...less than other videos I've seen. Most of what we're chipping will be cedar. Soft wood so not concerned other than size beyond the main branch diameter. Looks like it will squeeze quite a bit past the roller. Thx!

@Javelinjoe73 3 жыл бұрын

I recently got a WC68 and cannot imagine running it without eye and hearing protection.

@mxzrxp 2 жыл бұрын

WHAT ??

@yveskc1 3 жыл бұрын

Good information. Thanks

@sawingwithsandy 3 жыл бұрын

Thanks for watching

@msanford75 Жыл бұрын

Is there a way to ajust the chip size, you the chips smaller? Larger chippers, you can wasn't sure about this one.

@woodnewf3847 3 жыл бұрын

Maybe it's me but does something need to be adjusted? The chips seem to barely make it out of the chute. I'd want my money back

@sawingwithsandy 3 жыл бұрын

From what I know that’s how far it shoots when it’s chewing up damp wood or needles. Denser material without all the decomposed wood shoots further.

@joetterolison4093 Жыл бұрын

Hello I just bought the WC-68 back in September and have not opened the Box yet to assemble it. I know this a dumb question Has anyone ever split tree trunks in 4"x4" dimensions and then chip them? I know that is not a common idea but I was wondering since some people can burn or haul off larger trunk pieces Ken in Florida

@sawingwithsandy Жыл бұрын

Hey Ken, it would for sure work as I do chip some scrap lumber from time to time and have run material the size of 4x4 through it. I think the challenge will be length of the 4x4's as if they get too short like less than 10" they may get stuck between the chipping blades and the infeed roller

@galanjones8123 4 жыл бұрын

Sandy with all the saw dust and chips you have maybe it's time to buy a pellet mill ?

@sawingwithsandy 4 жыл бұрын

Haha true. I think I’ll start spreading it over my trails and maybe keep some for around the house. I’ve thought about making wood pellets for my woodstove but haven’t figured that one out yet

@townsendliving9750 4 жыл бұрын

They make little home use pellet mills. If you own the wood chipper you are half way to making pellets

@DrAaronCarmean 3 жыл бұрын

What’s the best way to utilize the chipped wood. I just ordered this attachment yesterday Just spread around? Garden? Do wood chips prevent weed growth?

@sawingwithsandy 3 жыл бұрын

I like to use the wood chips for keeping the weeds down and my trails nice and smooth through my woods

@dennissullivan7119 3 жыл бұрын

Does it clog often with the rotted wood? We just ordered a WC 88 and I here rotted wood clogs it and burns up the belts

@sawingwithsandy 3 жыл бұрын

I’m still on my original belt and have only clogged it a few times. Usually I have too many pine needles and not enough branch wood when that happens. Rotted wood I haven’t had an issue with

@y2b5 3 жыл бұрын

How do you get the wood more fine-grained. Say you want to use it on farm floors.

@sawingwithsandy 3 жыл бұрын

Unfortunately I don’t believe there is any adjustment for wood chip size

@sawingwithsandy 3 жыл бұрын

You may be more interested in wood shavings from a machine like a wood thickness planer

@Javelinjoe73 3 жыл бұрын

Try a real slow feed?

@owenslawnandlandscaping9665 5 жыл бұрын

how much is one of the smallest one with the infeed roller?

@sawingwithsandy 5 жыл бұрын

Owen & Katie's Vlog 2699 Canadian dollars on woodlandmills.ca website

@Liberty_Tree 3 жыл бұрын

what do you do with the chips?

@sawingwithsandy 3 жыл бұрын

Usually put on my trails

@peterpaulissen2690 3 жыл бұрын

why the wrong way round????

@sawingwithsandy 3 жыл бұрын

Not sure what you’re referring to Peter

@ceselb 3 жыл бұрын

I think he means the tree you feed in with the top first at @7:12 or something? Shouldn't matter either way, unless it has a bunch of branches, right?

@ImplantedMemories 4 жыл бұрын

Hey I want to buy the WC 46 (smaller Brother of your machine) Is there anything Bad about the Machine I should know. I live in Germany

@sawingwithsandy 4 жыл бұрын

I’ve yet to find any faults with my wc68 chipper. Thanks for watching. I’m headed over your way to Germany for a vacation next summer . Looking forward to it

@taurus66 2 жыл бұрын

It looks like it’s a waste of money. It’s a weak machine.

@sawingwithsandy 2 жыл бұрын

I find compared to what’s out there for pto machines in this hp range it does a great job for my needs

@preformancemustang 4 жыл бұрын

I’m not to impressed. Seams like to much work to feed it in.

@pearsc5d Жыл бұрын

Hi Sandy Have you put any fresh hardwood limbs and brush through that chipper. I'm cleaning out a maple bush of all the under growth. Mostly hardwood brush

@sawingwithsandy Жыл бұрын

Great question. I have used it to clear tops of maples. I try not to push tons and tons of leaves through it at once but instead alternate between leaves and branches to help keep everything clear when chipping