2010 Mazda 3 No Communication With PCM, No Start, No Crank

Рет қаралды 282,674

6 жыл бұрын

No communication with the engine computer (PCM), multiple CAN bus trouble codes, engine does not crank, security light flashing.
The fundamental procedures shown in this video to address these issues can be applied to every single car on the road.
ScannerDanner tools pages
-www.scannerdanner.com/tools.html
-www.amazon.com/shop/scannerda...
Video breakdown
- testing the 5v reference circuit 1:10
- related videos 2:48
• No Start from a shorte...
• 2002 Chevy Cavalier No...
• 1996 Jeep No Start Cas...
• 1996 Jeep No Start Cas...
• 1996 Jeep No Start Cas...
- relay testing fundamentals (main relay) 3:53
- testing the PCM control of the main relay 8:33
- using a test light to energize the control side of a relay 10:00
- dead fuse tests after jumping main relay 11:58
- why the test light should be used and not a jumper wire 12:15
- open circuit between fuse box and PCM identified 15:00
- 5v reference test after repair 15:40
- main relay control wire test at the fuse box connector 17:08
For more information on this topic, I have written a “field manual” called Engine Performance Diagnostics which is available at www.scannerdanner.com as an eBook or paper book.
Want even more diagnostic training? Whether you are a DIY trying to fix your own car, someone looking to become an auto technician, or a current auto technician that wants to get more into diagnostics, subscribe to ScannerDanner Premium www.scannerdanner.com/join-sc... There is a 14 day free trial.
On ScannerDanner Premium I will bring you right into my classroom at Rosedale Technical College. You will find page for page lectures taken right from my book as well as exclusive classroom type case studies. What is so special about these classroom case studies? I pull live problem vehicles directly into my classroom and we troubleshoot them in real time, using and applying the theory and testing procedures we learn during the classroom lectures. There is no better on-line training of how to troubleshoot automotive electrical and electronics systems anywhere!
Disclaimer:
Due to factors beyond the control of ScannerDanner LLC, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. ScannerDanner LLC assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. ScannerDanner LLC recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of ScannerDanner LLC, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not ScannerDanner LLC.

Пікірлер: 650

@juanrodriguez-ry6yt 6 жыл бұрын

folks see that book on the shelf in the end of the video i'm l1 master car and truck that book is the best money i have ever spend better than a 1/4 inch air racket

@ScannerDanner 6 жыл бұрын

thank you juan!

@williamtanner8222 6 жыл бұрын

I second that! Well worth the money, as well as the premium channel. I have no schooling, have been on the job for 5yrs, was okay at diagnostics before purchasing the book and subscribing to scannerdanner premium, but within the last few months my knowledge has grown tremendously and I now have ase certified techs asking me electrical/troubleshooting questions pretty much regularly. Not saying I know everything or that I'm the best or anything like that, just trying to give a testimonial that these things are well worth investing into and will help you perfect your craft.

@ScannerDanner 6 жыл бұрын

Thank you William Tanner!

@elyessy7238 6 жыл бұрын

William tanner, you just explained my situation in terms of where im at with my career. I left a diagnostic shop to go to a lazy front end/tire chain store, worst mistake ive done. Im in the middle of making the transition to diagnostics, ive been watching Danners videos for ONE day. I swear i have made more of a connection with electric theory now more than my past 5 years as a tech. Im getting that fkn book. Just, wow. Thanks scanner danner.

@Viper81766 6 жыл бұрын

Paul is the best I have seen in my 51 years at teaching and diagnostic procedures .

@dontehoward1554 4 жыл бұрын

Scotty kilmer didn't even go in depth as much as you did. Im a new subscriber keep it up. I love it!

@billygreenhorn9275 6 жыл бұрын

Great teachers like you make school and learning less stressful.

@martinsmartinsautobodyandr6740 Жыл бұрын

I've been getting many f150 trucks in for no crank no start no comm. Your method of testing for 5 volt reference is priceless. The owner has a few locksmiths and small shops check it out. After consulting with them not 1 person said they checked powers and grounds or for a 5 volt reference. Everyone said it's the pcm. The pcm is talking to several sensors so I ruled that out. Ruled out fuses and relays and ended up finding bad grounds. Many years ago I asked you about a 98 Chevy express van fuel issue and you steered me to the problem. I wish all my friends would stop calling me to beat my brain up with questions but somehow I always fix everything I touch. I'm a collision repair shop but hey money is money there days. It got to where I have to keep my doors locked and my phone off. Lol. I can't thank you enough Paul.

@ScannerDanner Жыл бұрын

what an awesome comment, thank you for sharing this with me and good for you man. You made that all happen.

@maxholmes6045 4 жыл бұрын

I would just like to thank you for sharing your knowledge with everyone! When I started my 2 year automotive program, I quite my job and opened a mobile mechanic business to help me get through school. I have used your knowledge along with my teachers at Wenatchee valley college to build my business from the ground up. I started with a rusty old truck and a few tools.I now have a small shop and a fully functional mobile service van. You have made my dream of owning an automotive repair business possible. Seriously thank you!

@ScannerDanner 4 жыл бұрын

This is awesome! Would you mind posting this to the feedback page of my website? www.scannerdanner.com/leave-read-feedback-new.html

@maxholmes6045 4 жыл бұрын

Absolutely, I try to do that now!

@keivanabdollahpour8737 Жыл бұрын

There's only one way to describe you. When you're fixing a car, the issue looks like a scared kitten stuck in the corner, cause it knows there's no scape for it, YOU WILL find it. My admiration to you. I wish I could be your student. God bless you.

@ak5546 2 ай бұрын

You still so young Here in Sweden if you reach to 75 year's you still young. God bless you and your family . Best regards

@bilalflayeh6889 6 жыл бұрын

I am from Middle East ( Jordan ) , I bought your e-book 2 years ago , it helped me a lot in my small business , I watch your videos every day , lot of valuable information . YOU ARE MY BEST TEACHER , THANKS MR PAUL

@ScannerDanner 6 жыл бұрын

That's awesome Bilal! God bless you man

@ScannerDanner 6 жыл бұрын

Thanks for your patience and for staying with me my friends. While I am teaching I cannot produce the same amount of content. I could if I wasn't so picky on how I film and edit things now :-). Watching my early videos is painful. The content has always been good, but the camera work and editing has not. Anyway, this current class runs until the end of May, look for more consistent uploads for June and July. Also, don't forget about ScannerDanner Premium on my website! There are currently around 350 videos with 200 of them recorded lectures from my class at Rosedale tech. The other 150 videos are exclusive case studies with the month of April getting 3 new uploads: 1. "2008 Ford F150 4.2L Waste Spark Ignition, No Spark From One Coil" 2. "2011 Hyundai Sonata 2.4L No Crank Troubleshooting (multiple CAN system faults)" 3. "Honda Power Window Circuit Operation and Testing (multiplex control units and switches)" Last thing, behind the scenes my web developer and I are constantly working to improve the website and in particular ScannerDanner Premium. You guys have been asking for a dated video list like KZfaq uses, and we are working on this as we speak. I've had over 50 new uploads since moving ScannerDanner Premium to the website and some of you are having difficulty locating them once I put them into a playlist. So this new dated list is going to help with this a lot. Thanks again to all of you for helping me make this possible!

@allanandrowey5219 6 жыл бұрын

Love it all. Thank you so much. We will wait as long as it takes for new uploads....and maybe even a new book of sorts?

@ScannerDanner 6 жыл бұрын

Working on that too!

@jarinwilson9539 6 жыл бұрын

A New book....? OMG, I just giggled like a school girl. It could have pop ups and/or you have to read it with 3D glasses.

@ScannerDanner 6 жыл бұрын

Haha yes!

@ruddygomez1455 5 жыл бұрын

ScannerDanner. Have a few questions

@ramblinredace Жыл бұрын

Great video man I can’t thank you enough. After putting a transmission in a 05 mazda 3 I picked up for 200.00 I had one flawless day with it and then this happened. For a few days now I’ve been battling with it. Knowing nothing about relays and ground switched circuits I had no idea what it was going to take or if it was even possible to get this car going again. I was able to learn a lot from your video and in a few shorts I had the car running again. Thank you again!

@lo0ops 6 жыл бұрын

Hey Scanner your production quality has gone right up. Love the overlays that really helps.

@hardway523 6 жыл бұрын

Man I get emotional watching your videos, you’ve given me a new drive in life learning about diagnostics. I’ll certainly be getting the Book and learning more about how the premium classes work. Your work is not in vain Sir, thank you!!

@8953147 6 жыл бұрын

I used your test light technique to troubleshoot a brand new harness in my car's audio system. The test light is a great asset in finding problems besides protecting the circuit. Thanks Paul- you are inspiring!!!

@SimplyDiagnostics 6 жыл бұрын

Great video Paul - “unless you’re looking for smoke” I nearly had an accident when you came out with that 😂 Don’t be worried about the amount of videos you’re uploading, there’s a lifetime worth of content already. People that see the value in what you share realise what it’s worth 👍 Steve.

@REPOOCNITSUJ 6 жыл бұрын

You should seriously consider writing a prequel to EPD. Basic Electrical!! You already have loads of video content. Great as always.

@vasileios_glystridis 3 жыл бұрын

Hi I must declare here with my whole honesty ..... This subscription and became a member in your web site... was the best INVESTMENT in the last decade.... At my early fifties I have learned to respect technicians worldwide and YOU My friend belong in the TOP 5 worldwide ..... Thank you for sharing your knowledge and experience. Vasileios Glystridis Automobile technician Canada

@chuym1983 4 жыл бұрын

This was the exact issue with my 2008 Mazda 3. I grounded the main relay and got com, a crank and start. Now I have to pull the box and check for that broken ground. This video is a god send. Can't thank you enough Scanner.

@MrTravisAl 2 жыл бұрын

Which main relay? i have a crank but no start. And a security light that blinks while vehicle is still unlocked. Checked Keys have proper function Immobilizer functional.

@chuym1983 2 жыл бұрын

@@MrTravisAl There should be one specifically named "Main". Check the diagram on the inside of the cover

@MrTravisAl 2 жыл бұрын

@@chuym1983 I figured it couldn’t be the obvious main fuse, especially since everything on this Mazda has been a complicated sob. 🤦‍♂️ I’ll definitely check in the morning. Thanks!

@chuym1983 2 жыл бұрын

@@MrTravisAl Yup. When you're under the hood and you pop off the fuse cover. It should be the only one labeled main. Keep in mind this relay is usually "switched" so you have to un ground it when you're not planning on having the engine on

@khadaryare6068 5 жыл бұрын

I’m Auto mechanic student, graduating this year. However, never electric and engine performance Diagnostics been easier than your videos. I’ve been watching your videos about a month and now, I use your methods at my job. Thanks

@darrendesmarais8124 6 жыл бұрын

I'am a premium member Paul and I recommend your website to everyone. I'am a journeyman heavy truck tech and the material you teach is very adaptable to my trade. All the same concepts, and most computers are very accessible on heavy trucks, so don't have some of the issues with cars. Keep up the good work. Thanks.

@ScannerDanner 6 жыл бұрын

Thank you Darren!

@ozzstars_cars 6 жыл бұрын

Finding the problem for a no start is always a fun challenge. Another great SD vid!

@michaelsalice9952 6 жыл бұрын

someone actually disliked this video??????? that person MUST be on the RAG!!!!!

@rick31869 3 жыл бұрын

THAT PERSON MUST BE A COMPLETE AZZHOLE ! LOL

@mikeoneill7360 6 жыл бұрын

I can honestly say that I have watched many of your videos and you most certainly end up in the fuse box a majority of the time. The 5 volt ref from the maf sensor harness is pretty cool to rule out the computer. What a great way to spend the evening with Scanner Danner, thanks Paul.

@ScannerDanner 6 жыл бұрын

Thank you Mike!

@joejones1330 6 жыл бұрын

You are great at what you do. I wish I had your knowledge and experience about diagnosing engine problems. Keep up the good work.

@petescustomcarshop 2 ай бұрын

Corroded fuse box imagine that. When I fix cars speed and accuracy matter I can't say for sure but I think I would have gone straight for the power circuit and if I find corrosion in the fuse box, well there you go. I do understand you are a teacher and you are teaching the fundamentals. Great job! Thanks for sharing.

@jackjohnson9989 6 жыл бұрын

Mr. Danner, I wonder if you truly have an idea of the (global) value of these videos you post. This Mazda 3 for example, is one of those Japanese killers that likely would not have gone to auction in my neck-o'-the-woods but probably to five or six mechanics with the owner cursing each of them (usually behind their backs - but not always!). I can only urge every viewer to support your channels in whatever is affordable to them. You are a God-send - selflessly sharing your knowledge and skills with the rest of us.

@ScannerDanner 6 жыл бұрын

Thanks so much my friend

@throttlebottle5906 6 жыл бұрын

where is it that so many skill lacking mechanics exist, maybe some will move there!

@jackjohnson9989 6 жыл бұрын

Ha! Ha! Actually the fellas aren't too bad. Often they have little or no technical info to go on with late models. Mainly its an ego and greed thing. Notice what a great arrangement Mr. Danner and garage owner Pete have? The latter appears to have more than enough spanner work on his hands and is happy to pass the auto-electrical along to his friend.

@throttlebottle5906 6 жыл бұрын

I guess I'm just a sucker then, cause I do major in depth troubleshooting and nasty no-lift repairs for peanuts (family, friends, enemies x10) If I'm lucky I get fed dinner, but most often! I end up paying for dinner also :))) atleast the devil and god ( folklore) will see me as a saint ehhh;)

@wyattoneable 6 жыл бұрын

Love your editing! The picture in picture and the commentary flows beautifully together. Then to find that issue with the steps you display was a lot of fun. Plus the wire was easy to get to, nice.

@ScannerDanner 6 жыл бұрын

Thanks Wyatt!

@tnamen1307 4 жыл бұрын

@@ScannerDanner Sir, my car SDVC function doesn't work in my i20 2011 1.2. all the other functions volume, etc. are working ok. Please show video how to check the SDVC signal wire damaged or shorted. Thanks in advance.

@ccxtransport4192 6 жыл бұрын

Paul it’s a great feeling seeing how humble you are and how you share your knowledge thank you for that and may God bless you and your family . Also you were really funny at the end keep on smiling and handing them out as well

@cougarkitt 5 жыл бұрын

Watched this 2 months ago and kinda got what you were doing. I Bought your book and now working through the sd premium videos at the moment. Just watched this video again today and wow! Reading the book has made this so simple to understand circuit design in this video. Well done on your efforts!

@joshuaburt1017 6 жыл бұрын

Thank you brother for what you do. Love watching all your videos. You are an intelligent man. And I'm sure your students would agree.

@madmotorrepair1748 6 жыл бұрын

Been looking forward to another new episode!

@frugalprepper 6 жыл бұрын

Great Video! Love the setup. This one is a goldmine for some good foundational information.

@guyinthegreencar 4 жыл бұрын

Great video. Very informational, I learn alot when I watch you. I am very mechanically inclined, but when it comes to electrical diagnostics im lost. Watching you helps me at work tremendously. Thanx so much for the videos.

@ronvonbargen8411 4 жыл бұрын

Great video. Never thought about importance of using a test light. I usually use a dmm for stuff like that. So hard to fry ecm with one. But as many times as I have forgot to switch the confounded test lead back to volt side of multimeter. I could see myself forgetting if it were a jumper wire I was using instead of a test light. Between you and Eric O. My diagnostic skills have increased tremendously. Thank you.

@nathanballinger6863 6 жыл бұрын

Very nice video. Although I don't repair vehicles, other than my own, I really enjoy the knowledge I get from your videos. Keep up the excellent work!

@baxrok2. 6 жыл бұрын

Excellent! One of your best videos yet on this subject. Thanks Dr. Danner!

@joemikos900 6 жыл бұрын

Never gets old, Thanks Paul.

@stephanrosty1924 6 жыл бұрын

*welcome back paul I have been waiting for along time*

@Airman.. 6 жыл бұрын

Its always a pleasure watching you in action Danner

@neverstoplearning382 6 жыл бұрын

I got the book. The best ever. I have learned a lot and applied those principles on the field with great success. Thank you master.

@ScannerDanner 6 жыл бұрын

Thank you so much!

@todayintheshopbanksy5904 6 жыл бұрын

Always makes me smile when they fire up. Thanks for posting bro

@AutodiagnosticoDetroit 6 жыл бұрын

really that you are the best !!! I am a faithful follower of your channel ... I learn a lot with you. blessings for you and your family!!!

@Re-tirados 4 жыл бұрын

Amigo de FD Automotriz?

@mike-yp1uk Жыл бұрын

I have changed my whole career by deep diving into this program with a nothing will stop me attitude. I'm now an L-1 master tech who has completely gained the respect of my boss and co-worker because they know I can handle anything.

@ScannerDanner Жыл бұрын

That's awesome man! Thanks for sharing!

@ashrafabdulla7404 6 жыл бұрын

Very Good Info, Very Nicely Explanation About The 5volt ref..

@kennypatrol2zero616 6 жыл бұрын

Nailed it, I think I'll order your book, I've seen enough of your videos to know whats in it, but it seems a cracking refrence book to have

@MrBlazenBruce 6 жыл бұрын

Great One!, You seem really happy, Hope everything is going well boss!

@johnaclark1 6 жыл бұрын

This is diagnostic gravy for those of us SD Premium subscribers! Wish I could get a car in my shop with such an easy one. Love it!

@georgebaerreis4720 6 жыл бұрын

Thanks for the great video, your channel has some of the best information on auto repair out there. Please do more test light videos, they're really helpful for people that can't afford the high end scan tools.

@ScannerDanner 6 жыл бұрын

Love my test light. Will do brother. Thanks!

@simbad909 Жыл бұрын

Nicely done...electrical tracing is a nightmare for most ppl..and costly... hence auction lol ..ur reaching ppl years later and helping.. very cool

@billyyoder8171 6 жыл бұрын

Thank you Paul. You mean so much to all of us technicians. Bless you brother. You're doing a Godly work by sharing your talents and light to the world. Love you brother.

@ScannerDanner 6 жыл бұрын

Thanks Billy!

@guysrealma4063 5 жыл бұрын

You just helped me diagnose a car that I haven't been able to crank in 4 years!! Thank you sir.

@MrTravisAl 2 жыл бұрын

Let me guess? Mazda? Lol

@garytattan 6 жыл бұрын

Best teacher I’ve ever seen.

@allanandrowey5219 6 жыл бұрын

Perfect video dude. Thank you. I have it on my bucket list to visit your class room

@karlwestfall2404 3 жыл бұрын

Thank you so much for making this video. The very same identical thing happened to my 2010 Mazda 3,and had the guy at shop that chases electrical gremlins not been on vacation,it would gave been there Friday. Sunday I ran across your video,and it's now happily running thanks to you.I know they'd have charged me a minimum of $500,again "Thank You"

@MrTravisAl 2 жыл бұрын

Did it end up being a corroded terminal in the harness? Did you have security light issues? Crank but no start? I have a 2010 Mazda CX7 and the security light blinks even while car is unlocked. I troubleshot the immobilizer and key and they’re compatible. (It cranks. No crank if immobilizer is unplugged or moved away from key. But when returned it cranks.) everything was fine until another mechanic changed the spark plugs now all the sudden the vehicle wont start. The owner is my friends and desperate. I spent all day on it reprogramming keys. Changing spark plugs back etc. I’m at a loss.

@lasthope703 3 ай бұрын

I’m glad you post this. I pretty sure I am going to watch this again.

@jakeandrus690 6 жыл бұрын

Good stuff there Paul, great basic checks there

@TheCarTakerGarage 6 жыл бұрын

Man i love your channel!Another awesome video and job,and the "mood" in your videos is just perfect!Greetings from Norway , Stefan :)

@enriquebauza749 2 жыл бұрын

Hi paul. Man great learning videos.you know anyone can do the mechanical side of an Automobile. But today with these high tech automobiles those techniciands that can master using scanners electrical schematics and learning how to read them CORRECTLY... thats where the $$$$ is.In the 80"s 1985/ 86. I was working for Audi. Lucas Lighting did the electrical harnesses for Audi. Paul talking about a devastating migraine. Continue the great videos dan. God has given you great knowledge as well as field experience. Am an ASE Masterr Tech. For 40 years. Had to stop working 8 yrs ago du to dissability. Sold all my tools and scanners.you keep that dream still alive in your videos and i appreciate you greatly. There are alot of honest technicians out there that are very knowlevdgaeable but theres also alot of parts changers that will still your money charging you hours of diagnosis because they dont know what they are doing. Am lucky i have my bestest loyal frind that helps me in my car issues. I really dont trust some techs in this industry. Thank you so much paul. May god bless you, your family, your students.👍👍👍

@rogerrivera4012 4 жыл бұрын

You are awesome Mr. Danner. I can’t stop watching your videos . God Bless You!

@edralinbustalinio5213 3 жыл бұрын

thumbs up....... great job bro.....your the expert......open circuit is not an easy to find out the fault, only experienceable and aptitude like to solved such lost communication....with PCM no crank, security light flashing.....im proud of you....

@nicknicu1787 6 жыл бұрын

Great video as always Paul! 👍 I can only imagine the guys that sent this to auction : scanner into the OBD 2 port,no COM...computer dead send this to auction! I bet you knew what’s wrong with it once you pulled that relay and saw the green death! 😁

@oddmanout7755 3 ай бұрын

Very high quality education. Highly recommended to any new mechanics.

@ScannerDanner 3 ай бұрын

Thank you!

@nicholasmalone6321 6 жыл бұрын

I enjoy these videos, they've really upped my game doing electrical diag! Thank scannerdanner

@dryamaha4905 Жыл бұрын

Hey Dan I love your channel I’ve been a mechanic for since 82 so what’s that 40 years Porsche‘s general motor‘s master tech now I’m Volvo Mac truck master tech your diagnosis process is awesome I just want to say you do a great job have a great day

@nickdimovski7272 9 ай бұрын

old video but currently watching this today to diag my ms3, this video was very informative and bridged some gaps i was having trouble with on my car. you are a great teacher i wish i could have had the opportunity to learn from you in person

@ScannerDanner 9 ай бұрын

Thank you nick!

@2.3fox 2 ай бұрын

@2:58 I want to thank you for this addition of videos you have listed! 🙏🏽

@kennedysgarage3281 Жыл бұрын

This video just popped up & I had to watch it again, but you really can see your teaching skills shine through on your thought process & in the way you explain system layout. I always learn something every time I watch. I suppose Paul I owe you a lot for me being the tech I am today 🙏🙏👍

@ScannerDanner Жыл бұрын

Such a great compliment. Thank you so much. Made my morning

@kennedysgarage3281 Жыл бұрын

@@ScannerDanner you deserve it 🙏🙏👍

@billrimmer5596 6 жыл бұрын

Wow that was really slick!! Liked those little pins with the balls on the end. 5volt ref and incandescent test light.

@GroundedDiagnostics 5 жыл бұрын

So simple when you know the basics. Thank you i love to learn this stuff.

@angelramirez7747 6 жыл бұрын

Well executed! Thanks for making great videos ScannerDanner. You are the man!

@davidmotoman4956 6 жыл бұрын

Loved it when you found the open circuit, My mind was going check the Wire it self at Both Ends to see if possible either faulty terminal at computer or then at Fuse Box. Loved the Fine Paul. you are such a great teacher in fault Diagnosis and repair. Wish i lived a little closer would certainly attend a few of your Classes, can never stop learning Cheers from Australia

@ken4head 5 жыл бұрын

Great explanation on how to check this problem! I will be following it step by step tomorrow, on the job, at a Mazda dealer, while I try to diagnose a 2010 Mazda 3 auction car that came in with no communication with pcm and a no crank condition. This video will save me hours. Thank you.

@MrTravisAl 2 жыл бұрын

Hey Ken. What did it end up being? a fraued wire / corroded terminal in the harness? Did you have security light issues? Crank but no start? I have a 2010 Mazda CX7 and the security light blinks even while car is unlocked. I troubleshot the immobilizer and key and they’re compatible. (It cranks. No crank if immobilizer is unplugged or moved away from key. But when returned it cranks.) The owner is my friend and is desperate. I spent all day on it reprogramming keys. Changing spark plugs back after another tech changed em. Checking fuses etc. I’m at a loss.

@darshanabandaranayake2605 4 жыл бұрын

your effort is highly appreciated since many of learners seeking better guidance as what you given for us.That is considered as great empathy ....keep going we the best followers...

@gregsmart6002 4 жыл бұрын

Paul, take your ring off. Safety first!!! Great videos!!!

@Ironblank1 5 жыл бұрын

I bought your book already I just wished it was hard cover, I’d paid the difference... I learned a lot on this video. Thank you so much for your videos!

@randywilson8300 Жыл бұрын

Watching you explain and fixing problems on actual vehicles is really cool you don't believe how much this has helped me it thank you so much I live in trinidad I would really like to sign up for you on line classes

@ScannerDanner Жыл бұрын

Do it! You won't be disappointed www.scannerdanner.com/join-scannerdanner-premium.html Look forward to hearing from you more, thanks so much!

@arnoldnxtlvlupsablan9405 2 жыл бұрын

First Id like to thank you for making this video, With that said I manage to acces the electrical issue im having..and lucky me its what this video 100% hand in hand situation I was having..with my fully built mazdaspeed3 (even better) your demo car happen to be,not quiet but almost identical car..thank you Sir im oretty sure i can find the link on your book here somewhere,,but to show my appreciation and and how thankful I am for your time to share your uncanny gift in your field..to us next gen guys.wether import or domestic...Sir you are....LEGEND.✊🏽✊🏽✊🏽

@valentinogallego4091 3 жыл бұрын

Man I've been binge watching your videos and I've gotta say, I get a weird high when you go through the process of diagnosing and confidently state that it should turn after an intervention. Almost like I'm there working working on the car aswell 😂 Keep up the good work, I like your style of diagnosing because I dread spending on unnecessary spending for parts

@pigeonsil240sx 2 жыл бұрын

me too lol its a taste of the high you get when you fix a problem using the skills learned.

@meekmill6214 10 ай бұрын

I needed this so much...my 03 ford expedition sat for months many mechanics told me all kinds of things but I knew they were wrong and piece by piece I found my problem but couldn't solve it and here was the answer 😂😂😂😂...thanks

@peejaysantin6644 6 жыл бұрын

sweet.another awesome video man.keep feeding us with more awesome videos. God bless you more

@UNEEK_LOGIK 6 жыл бұрын

Once again basic but very useful Always learning with you Danner!!..

@ScannerDanner 6 жыл бұрын

thank you

@TheCoatneyadkins 6 жыл бұрын

EXCELLENT EXCELLENT video Mr Paul.... thank you!! I binge watch all of your videos... and your book is the bees knees... the troubleshooters Bible.

@israelzunigamascorro9300 6 жыл бұрын

excellent video Mr Paul

@elleryjqueen1712 6 жыл бұрын

Another great video my mate, I love this channel...

@dashtyATG Жыл бұрын

Thanks a lot for the whole 20 minutes. For the 1st time I've managed to listen very clearly and learned something amazing from you. Bless.

@ScannerDanner Жыл бұрын

Glad it was helpful!

@dashtyATG Жыл бұрын

@@ScannerDanner yes sir thank you.

@georgemicheal9036 6 жыл бұрын

ScannerDanner is awesome wouldn't you say!!!!!

@pablolopez973 6 жыл бұрын

Thank you for sharing your videos about automotive repair.god bless you.

@khadarilyo4838 11 ай бұрын

From Somaliland I like your lessons and download it everyday.

@kyletuttle6919 5 жыл бұрын

One of the best teachers i've ever seen.well worth the 11 bucks a month.thanks danner.

@ScannerDanner 5 жыл бұрын

Thank you Kyle!

@peterdatechmen5506 6 жыл бұрын

Quite a common fault,also burn out in white plug where ignition feed is (you tested) through poor ground and the same green gunge! Love the videos Dan, makes teaching my staff so much easier with these quality vids.

@ScannerDanner 6 жыл бұрын

Thanks Peter. My name is Paul btw, my last name is Danner :-)

@RR-bt5xv 6 жыл бұрын

You keep making videos like this one and my customers are going to be fixing their own cars LOL awesome video keep it up.

@ScannerDanner 6 жыл бұрын

lol sorry about that

@brendo3314 3 жыл бұрын

You make it look simple the sign of a top class teck

@PistonShack 4 жыл бұрын

Awesome Paul. I watched to the end and wrote 5 pages down everything you pointed into my notebook. I'm going to get a copy of your book. Cheers)

@binar91 2 жыл бұрын

Thank you man Iam planning on opening a diagnostic shop. And iam on your channel like 24/7 i have learned a lot from you

@ScannerDanner 2 жыл бұрын

thank you so much! After you watch them all here, visit my website and sign up for ScannerDanner Premium for another 470 videos and counting. Half of the videos are of a classroom training environment. Hope to see you there www.scannerdanner.com/join-scannerdanner-premium.html

@Watchyn_Yarwood 6 жыл бұрын

Great video, great lesson! Thanks!

@rickcoleman8903 5 жыл бұрын

What kind of chump would give a thumbs down? Thanks for your teaching and sharing your time.

@calebbouchillon 5 жыл бұрын

Bulb test lights are the greatest and most overlooked diagnostic tool

@gabiladarlington1456 4 ай бұрын

I bought you book it makes diagnostic work so easy thank you prof.

@TheLeprejrlaw Жыл бұрын

Yinzer for Sure! Nice Pens shirt. Thank you my man! Very articulate in your explanation and endeavor. Totally going to apply to Mazda 5. Same issue.

@jeffk4223 3 жыл бұрын

Best YT video i've seen in a long time. Brilliant, a true mater at work.

@ScannerDanner 3 жыл бұрын

Thanks so much!

@mostlymoparih5682 6 жыл бұрын

Excellent video. You sir are very good at what you do. I like the fact that you do not forget the basics and that's what the great teachers do, they hammer home the basics. You are very logical and you use a lot of common sense. Common sense is not taught today in our schools. I guess I can't say that because you teach common sense. Thank you for being an exception to the rule, have a great day Professor.

@mostlymoparih5682 6 жыл бұрын

Old man glasses aye? You very funny Dr Jones.