Scantool Comparison: XTOOL A30M vs D7 / Get the Right Scanner for You

Рет қаралды 2,148

Күн бұрын

Here's my scantool comparison featuring the A30M vs d7 and how to get the right scanner for you. Either XTOOL scanner could be what you need if you're looking at getting the right scan tool for you. Getting the right scanner can take quite a bit of effort, if you're really looking for a professional OBD2 scanner on a budget. Either the A30M or the D7 are among the best scan tools in the market at their price.
Get on Amazon
- XTOOL A30M (use DIYA30MM to get 8% Discount) - amzn.to/3qEN890
- XTool D7 scan tool - amzn.to/3Gao4uK (use coupon code: DIYERD7NG 10% OFF!)
- XTOOL D7W - amzn.to/3J0bHTe (use coupon DIYXTOOLD7W to get 8% OFF!)
- XTOOL D7S - amzn.to/4dbqVCZ
Check out other tools & products I use or recommend - amzn.to/42LGCL8
I may earn a small commission from a purchase made through the links above. This does not increase the price you pay in any way.
Timestamps:
0:00 - Intro
0:25 - Design
0:35 - A30M vs D7 commonalities
1:09 - D7 vs D7S vs D7W
1:42 - A30M vs D7 differences
3:13 - Making a decision
#xtool #scantool #scanner #diyautoworksng #diymechanic #diycarrepair

Пікірлер: 20

@404notfound..... 2 ай бұрын

Another excellent tutorial!!! Thank u my friend!! Cheers from Canada. 🇨🇦

@DIYAutoworksNG 2 ай бұрын

Thanks mate. Always refreshing to hear from you!

@OgunjobiDavid 2 ай бұрын

Thanks for this. Will most likely proceed to getting the A30m

@mrrobotto3321 2 ай бұрын

Great video. I was able to get an A30m from aliexpress for $95. Its an amazing unbeatable deal at that price. I want a d7 or similar to have key programming/coding but I dont have many vehicles rn.

@DIYAutoworksNG 2 ай бұрын

That's a steal! Happy for you!

@user-hr5dc4ly3q 23 күн бұрын

Thank you ❤

@donniev8181 2 ай бұрын

Thanks!

@zw3245 2 ай бұрын

Hi, nice video. it seems that the A30M is now compatible with the CAN FD protocol: to check on a recent vehicle.... even if the software interface is almost identical, there are two important things that the A30M does not do: - no display of several graphics on a single screen - no saving of.CSV files (while on old versions this was possible!)

@DIYAutoworksNG 2 ай бұрын

Thanks for the compliment! Yes, I agree on compatibility with the CAN FD. Same as the D7. It's DoIP that they don't yet have. The A30M is actually able to display several PIDs on a single graph. Just select the PIDs, select custom on the tab below and then combine. Yea, I don't see the saving .csv files. Never checked the old versions for it though.

@jasonmustang9039 Ай бұрын

For the D7

@jasonmustang9039 Ай бұрын

A great video very informative just got this scanner and was hoping I could do throttle relearn with it it I have a 2004 2500 pickup and the same year Express van and I can't seem to find anywhere that would have the throttle body rele arn you have any tips or tricks I should be looking for thanks again

@DIYAutoworksNG Ай бұрын

Thanks for sharing. Might be good to start with the checking support on XTOOL's coverage tool www.xtooltech.com/english/FunctionQuery.html

@topeadelowo8052 14 күн бұрын

Sorry this question is off on a little tangent. But can the Xtool D7/D8 do a PCM reset and Idle Learn on an Honda car? I have a D8 which is functional identical to a D7 but someone said neither can reset the PCM in a Honda car. The guy said I should have gotten a Foxwell NT510. 😢

@DIYAutoworksNG 14 күн бұрын

D7 can do a PCM reset for Honda 100%. Done it myself. Idle learn on Honda to the best of my knowledge is a manual process, doesn't involve scanners. It's: reset PCM, start car, hold RPM at 3000 till cooling fans come on twice. Allow car to idle for 5 minutes. If the cooling fans come on during the 5 mins, discount those minutes. So essentially, you'll only count the 5-minute idle during the times the cooling fans were off.

@topeadelowo8052 14 күн бұрын

@@DIYAutoworksNG Both you and your videos are priceless in solving the most important car issues. Thanks again. 🙏

@DIYAutoworksNG 14 күн бұрын

You're welcome!