Scarlett 18i20 Expansion To 16 Channels With OctoPre

No video

Scarlett 18i20 Expansion To 16 Channels With OctoPre

Рет қаралды 10,806

Aqeel John - Johnny B'

Күн бұрын

Пікірлер: 104

@chris202x_ 3 күн бұрын

watched a 100 video trying to accomplish this but this video was perfect. THANK YOU

@aqeeljohn-johnnyb3433 3 күн бұрын

you have no idea how encouraging your comment is Chris, thank you and please consider subscribing.

@DraigGalon 10 күн бұрын

Stuff I didn't know but needed to know, thanks

@aqeeljohn-johnnyb3433 9 күн бұрын

you are welcome my friend, good luck, please consider subscribing. thanks.

@BottleMakesMusic 4 күн бұрын

Thanks for the video. Very useful. I have the Scarlett 18i8 and this tutorial has been super helpful in setting up the ADAT side of things in Reaper (my DAW of choice rn)

@aqeeljohn-johnnyb3433 3 күн бұрын

I am super happy my friend that the video helped you even though your DAW is different. Good luck, and please consider subscribing.

@ernestdaniels1671 7 ай бұрын

This is an Excellent Tutorial. I saw this video and laughed because I needed this video tutorial 5 months ago!! I was pulling my hair out trying to connect these two devices together. First, I thought since the icon of a green lock appeared on the 18i20 when syncing, then the lock on the OctoPre should turn green as well. Boy was I wrong, only a green dot on the OctoPre appears, the lock icon will not appear green for the OctoPre. Second, when I finally got them synced together, I kept speaking into my mic, which was connected to the OctoPre in channel 5 and the incoming signal was not appearing in my DAW. This was because I didn't know about Channels 9-12 being used for SPDIF and Loop back only. Once I read the manual fully, I got it all worked out. Here's a Tip folks, “Read The 18i20 Manual First” for the ADAT Information and setup in the DAW.👍👍UPDATE*** the Scarlett WILL NOT allow hardware processers to be used because there is no DA for the inputs. CAUTION, The Scarlett OctoPre will ONLY work with MICRPHONES. For hardware expansion, you will need the Scarlett OctoPre Dynamic

@aqeeljohn-johnnyb3433 7 ай бұрын

I struggled to when I had to connect these two, therefore I decided to make the video.

@ellisshahin763 25 күн бұрын

dude thank you sm! I was really stuck on this

@aqeeljohn-johnnyb3433 25 күн бұрын

you are very welcome my friend, I was stuck for a while too, therefore I wanted to make it easy for other who stumble on my video. Please do subscribe, good luck.

@nickmicdickerson 8 күн бұрын

Thank you for your education video it is perfect

@aqeeljohn-johnnyb3433 7 күн бұрын

Your comment means a lot, thank you and good luck. Please consider subscribing.

@JeffMotkeyz 29 күн бұрын

Great video🏆 Thanks soooooo much!!!

@aqeeljohn-johnnyb3433 29 күн бұрын

You are very welcome , good luck and please do subscribe.

@Appleloucious 23 күн бұрын

One Love! Always forward, never ever backward!! ☀☀☀ 💚💛❤ 🙏🏿🙏🙏🏼

@aqeeljohn-johnnyb3433 23 күн бұрын

@@Appleloucious thank you so much, please do subscribe

@Appleloucious 23 күн бұрын

@@aqeeljohn-johnnyb3433 I would have already if it was intetesting to me (:

@chuckanschutz5406 9 ай бұрын

Best explanation yet. You get a big thumbs up.

@aqeeljohn-johnnyb3433 9 ай бұрын

Thank you so much Chuck for such appreciative words. Also I am glad it helped. Do consider subscribing please.

@joshlarkindrums2395 6 ай бұрын

Dude!!! Excellent tutorial - I really appreciate you taking the time to do this. 10/10

@aqeeljohn-johnnyb3433 6 ай бұрын

You are very welcome and thank you so much for taking time out to comment and appreciate my work. Please do subscribe if you haven't already, thank you.

@mstew93 4 ай бұрын

I'm so glad that I found your video! I just got an Octopre within the last week and this was the PERFECT tutorial. I appreciate you explaining the "why" behind the "what" that you were doing. It helps to get my head fully wrapped around the whole thing! Keep it up! Brilliant content, especially for those just learning this!

@aqeeljohn-johnnyb3433 4 ай бұрын

Thank you my friend, and I appreciate that you liked the why behind just the mere steps, . Tank you for your kind and encouraging comment. Good luck, and please do subscribe.

@davidwilliamson1892 5 ай бұрын

Extremely well explained..(Taking Notes to add to my book.)!

@aqeeljohn-johnnyb3433 5 ай бұрын

hey David, thank you for your encouraging comments, best of luck setting it up for you. Please do subscribe .

@chrisdabu 7 ай бұрын

This is a super helpful video. Off to get the octopre to expand my 18i20. Thanks so much!

@aqeeljohn-johnnyb3433 7 ай бұрын

Thanks man for the comment, I am so happy it helped you out. Good luck, and do subscribe please. Thank you.

@CRRollyson 6 ай бұрын

Cleanest explanation I’ve watched and the clocking breakout great. 👍 good stuff. Would love to see your explanation of routing in focusrite control.

@aqeeljohn-johnnyb3433 6 ай бұрын

Thank you so much pal, your words are encouraging and kind. Would soon do a video on Focusrite Control.

@3L3V3NDRUMS 8 ай бұрын

Great and helpful video! I'll try to install my Focusrite 18i20 and my OctoPre tomorrow for future drum recording using multichannel. Until now I recorded just Stereo from my Behringer X2442 USB Mixer. Thanks to your video I know everything what I've to do tomorrow. Keep up your great work🤘🤘🤘Merry Christmas🎄

@aqeeljohn-johnnyb3433 8 ай бұрын

Dude you made my day, thank you and happy recording. Appreciate he feedback. Merry Christmas. Do consider subscribing.

@CREA9TURE 4 ай бұрын

Thank you for giving the best explanation..

@aqeeljohn-johnnyb3433 4 ай бұрын

You are very welcome, and thank you for leaving the comment. Please do subscribe if you haven't already, and good luck.

@djsugarbear6079 6 ай бұрын

Hey man great tutorial…. Super clear to understand… much appreciate this!! 😊

@aqeeljohn-johnnyb3433 6 ай бұрын

You are very welcome my friend, and thank you for your comment. Good luck. And please do subscribe.

@harmonystudiosugandamackin2901 3 ай бұрын

Great job

@aqeeljohn-johnnyb3433 3 ай бұрын

Thank you so much

@AviatorGreenYT 2 ай бұрын

thank you

@aqeeljohn-johnnyb3433 2 ай бұрын

You are welcome, thanks for the comment, please do subscribe.

@ilthurynel7391 5 ай бұрын

Excellent explanation, thank you.

@aqeeljohn-johnnyb3433 5 ай бұрын

thank you so much for your comment, its really encouraging, and you are very welcome. please do subscribe

@gerardrum1 6 ай бұрын

Excelent tutorial thank you very helpfully.

@aqeeljohn-johnnyb3433 6 ай бұрын

You are very welcome sir, good luck. Please do subscribe if you haven't already. Thank you for your comment.

@MalikDrumz 6 ай бұрын

Great Tutorial!👏

@aqeeljohn-johnnyb3433 6 ай бұрын

Thank you for your time to watch it, and thanks for subscribing.

@jimh3858 5 ай бұрын

Very helpful! Thank you

@aqeeljohn-johnnyb3433 5 ай бұрын

You are very welcome, please do subscribe if you haven't already, that would be highly appreciated. Thanks you.

@GabrielByrd 5 ай бұрын

Your explanation was very clear and helpful in improving my understanding of ADAT connections. I did notice something that I'm uncertain about, though. When setting up my Scarlett 18i20 and Clarett Octo Pre in Pro Tools, instead of displaying SPDIF or ADAT 13 in the inputs, it simply shows as digital 1, 2, 3, 4, etc. Upon exploring the Focusrite Control panel, I found that selecting DUAL ADAT in the Digital I/O mode allows me to configure inputs 11 and 12 (or digital 1, 2 in my case) as well. While this seems straightforward for me, I'm unsure if it's correct or if it might cause any issues. For my setup, connecting input 1 on the Octo Pre results in Pro Tools showing it as DIGITAL 1. However, switching the Digital I/O mode to SPDIF optical forces me to use input 13 (or DIGITAL 3). I conducted a mic check using both setups, and the recordings sounded identical. Could you please clarify if there's any significant difference between the two configurations? Thank you!

@jonatanbergmusician 8 ай бұрын

Good job man! I feel you, I’ve also recently started youtubeing. Youre doing great, thanks for the demo! Cheers

@aqeeljohn-johnnyb3433 8 ай бұрын

Thank pal, and I appreciate you commenting and liking. Do consider subscribing, and I have already subscribed to yours. Merry Christmas.

@jonatanbergmusician 8 ай бұрын

@@aqeeljohn-johnnyb3433 Sure thing, have done so! And thanks for the demo again. Merry 🎅🏻

@aqeeljohn-johnnyb3433 8 ай бұрын

@@jonatanbergmusician Merry Christmas dude.

@user-uv4cr7kr5l 8 ай бұрын

Thank you so much!! Very helpful👍

@aqeeljohn-johnnyb3433 8 ай бұрын

You are very welcome :), glad you found it helpful.

@KirkyDrums 7 ай бұрын

amazing man . Thanks I needed this :)

@aqeeljohn-johnnyb3433 7 ай бұрын

You are very welcome my friend, Glad you found it help ful. I saw a video on your channel, love your set up.

@KirkyDrums 7 ай бұрын

Hey thanks man its evolved a lot since then and going to do a studio tour update coming up @@aqeeljohn-johnnyb3433

@aqeeljohn-johnnyb3433 7 ай бұрын

@@KirkyDrums Look fwd to the tour, just subscribed to you, hope you wont mind returning the favour ;)

@dRew-something 7 ай бұрын

Great video and explanation. How would you do it the other way round? 18i20 - octopre? Still haven't downloaded a DAW..what are you using? Also,if i go out of OctPre into my 18i20 via ADAT as described in your vid,theres 2 ADAT ports on octPre..which one do you go out of? Can i just use a world clock BNC cable instead? Sorry for all the questions

@aqeeljohn-johnnyb3433 7 ай бұрын

I use Logic Pro X my friend, as far as the other way around goes, I haven't done the set up for the other way around, but I know for a fact that you will need "World Clock Cable" that will take out from 18i20 "IN" to the Octapre. DO give it a shot. Good luck.

@dRew-something 7 ай бұрын

@@aqeeljohn-johnnyb3433 thanks for your reply and help👍I'll definitely give it a go.

@joelfabrice_music 5 ай бұрын

well done mate! thx

@iamshainefisher 8 ай бұрын

This works on 1 cable if I use 44.1 or 48, but I need to use both cables to use 96k, right? It's the same setup, same routing etc?

@NeoONELove Ай бұрын

Is there any reason you used the clock from the octopre instead of the clock from the 18i20? Is the octopre clock more reliable..does this configuration take some of the burden off the 18i20?

@aqeeljohn-johnnyb3433 Ай бұрын

thanks for watching the video and commenting, both clocks are equally reliable, to make 18i20 as main clock I would have needed 1 more ADAT cable; if you bring another cable the routing and setting within the software will be slightly different, that is all there is.

@HGMNinja 14 күн бұрын

I started thinking, "hes gonna miss something." Based on my personal requirements. But you hit a home run. Hoever, you kinda threw me a curveball when you got to the DAW. I use cubase. I would have lived to have seen Cubase as the DAW, as from what I gather, its a little different. But I will still take a look at that later. I was having issues with only 8 channels showing in cubase so my Octopad thats in input 3 of the Octopre, isnt being capotured in Cubase. Thats the problem I am trying to get around. Also, I havenyt checked your channel, but can you do a video about Inputs, Outputs, Channels and Busses. And explain the differences. its probably basic but as Drummer, its confusing. Especially in practice. Thanks.

@aqeeljohn-johnnyb3433 13 күн бұрын

Hey Ninja, I love it when my content is viewed with a critical lens, thanks, and I appreciate the home run compliment. I do not have CueBase or else I would do a video on that too, but for now, hopefully the video can be of some help to you. in terms of making video on Outputs busses and channels, I would definitely look into it but again it will come from Logic's perspective as that is my DAW. I have made some videos on using rC600 looper, do check them if it interests you and please consider subscribing. Good luck.

@YongB.Tixarr 2 күн бұрын

Hi Buddy! That's a nice explain video. I have a quick question about it. Does is work with the output setting? Let say I want more than 12 outputs from both of them.

@aqeeljohn-johnnyb3433 Күн бұрын

hey buddy thanks for your question, this is something that I never needed to do, I am afraid I do not have an answer for that, but I can tell you will have to adapt setting in the focusrite software and you might be able to attain what you are looking for. Good luck.

@YongB.Tixarr Күн бұрын

@aqeeljohn-johnnyb3433 Thanks for the reply, man! I think I will ask our local store the demo Octopre than use your technique to see if it might work.

@aqeeljohn-johnnyb3433 Күн бұрын

@@YongB.Tixarr good luck my friend. Please do subscribe if you havent already.

@TravisMcInroy 4 ай бұрын

Great tutorial. Is there any advantage to using an Octopre as opposed to using two 18i20's?

@aqeeljohn-johnnyb3433 4 ай бұрын

Thank you and I am glad you found it helpful. If I understand your question right, do you mean is there any advantage of using OctoPre as main? We can have 18i20 as brain , the only did is that we will have to use two adat cables, and the routing might be a little different

@Bashanvibe 6 ай бұрын

New sub!!! I’m enquiring buying these units for my hardware keyboards without having to buy a patch bay!!! And so my wife can stop saying that I’m not using all my boards!!! Side note!!!😂😂😂 but my question I saw few clips on how to hook other interfaces with this device!!! I have the Appolo Twin and LPX & AL as my DAW of choice!!! Is the connection the same set up applies?🤔

@aqeeljohn-johnnyb3433 6 ай бұрын

Hey buddy, good luck getting wife to saying stop to the use of boards, or anything for that mater ;) As far as connecting the Octopre with another unit, I have no experience doing that, but I am sure that the unit would be compatible with other units as well. You will have to do some research. good luck.

@toshikasuga 6 ай бұрын

This was very helpful🙌 Quick question. Do you monitor through 18i20? or Octopre? Thank you 🙏

@aqeeljohn-johnnyb3433 6 ай бұрын

Thanks and I am glad it helped out. For the question you have asked, do you mean to ask if I connect monitors with 18i20 or Octopre? if that is the question, yes, my monitors are connected in output 1 & 2 of 18i20. Good luck, and please do subscribe, thank you.

@toshikasuga 6 ай бұрын

Got it👌 Thanks again 🙏

@aqeeljohn-johnnyb3433 6 ай бұрын

You are very welcome my friend. Good luck@@toshikasuga

@Brinxv.studio 6 ай бұрын

So which one is suppose to be plug in to the computer? The 18i20 or the Octopre?

@wilkopiano Ай бұрын

What about if you turn off the octopre as a slave device but with adat set as source clock. Can you still use the 18i20 and record part time with the octopre, i dont need all 16 all the time and dont want to burn the electric bill.😂 i’m actually trying to the same but with two 18i20s

@aqeeljohn-johnnyb3433 Ай бұрын

thanks for the question pal, i guess you can try, but I am pretty sure if you brain is off i.e. Octopre, 18i20 wont record, but give it a shot.

@Etomic-A-NewFound-project 3 ай бұрын

So if im using the octopre in Ableton will i need to worry about the inputs being preassigned or will Ableton just recognize them as normal inputs? If not do you think you would know how to reassign them through Ableton?

@aqeeljohn-johnnyb3433 3 ай бұрын

Thanks for your comment, Abelton being an industry standard DAW, I would assume that it would automatically recognize the inputs. I have never tired the unit with Ableton, so you will have to try it to find it. Good luck.

@Etomic-A-NewFound-project 3 ай бұрын

@@aqeeljohn-johnnyb3433 thanks man. Plan to get this thing soon and just want to know all I need. Appreciate your tutorial.

@bridgingfears3771 6 ай бұрын

Where can I find that cable. Great tutorial by the way.

@aqeeljohn-johnnyb3433 6 ай бұрын

You should be able to find at at a musical store near you or definitely on amazon. Thank you for the comment and appreciating my work.

@PeterLoof 7 ай бұрын

Thanks man, but How about all outputs? If you want to use both 18i20 and Octorpre out for sending audio to outboards? And the samplerate, when should you use higher than 44.1?

@aqeeljohn-johnnyb3433 7 ай бұрын

Hey pal, if you got your question right here is my reply: I have never used my interfaces for live setup where I had to send the the outputs to the outboard, all I can tell off the top of my head is that there are 8 outs at the back of both the units and those, when aligned with Focusright Control, can easily send the outs to the outboard. As far as hrtz go, I would keep it at 44.1.

@dansker4583 7 ай бұрын

Not bad, you did not discuss how to setup for 7.1 ( the trick is mono on the FR control app I discovered

@aqeeljohn-johnnyb3433 7 ай бұрын

I definitely dint cover that as it wasn't the focus of the video, perhaps in another video. But thank you for bringing it up, goes on my list.

@wzaborske 8 ай бұрын

Is there an advantage to using 2 ADAT cables?

@aqeeljohn-johnnyb3433 7 ай бұрын

From what I understand, using 2 ADAT will not give you anything extra, and there isn't even a need if you do the set up that I have done, but if you would make your interface the brain, then you might have to use 2 ADAT cables.

@hansdampf6777 6 ай бұрын

ace tutorial!

7 ай бұрын

Soooo.... I bought octopre, and it seems that it add only 8 inputs, but *not* 8 outputs from DAW :(

@aqeeljohn-johnnyb3433 7 ай бұрын

Thank you for your comment my friend, I haven't yet had a need to use the outputs on Octopre., so can't say much about it. Why are you having to use the outputs of Octopre, what are you trying to achieve here?

7 ай бұрын

@@aqeeljohn-johnnyb3433 I'm using DAW as a multitrack only, with analog mixer to actually mix. So I need output for each input. I was pretty sure that it has adat in and out, as it have 2 sockets. But it turned out that it's for higher sample rate input only.

@aqeeljohn-johnnyb3433 7 ай бұрын

@ I like how you are trying to use the analog mixed to do hands on real time mixing, and I can see why you would need O/P to come into the analog mixer, try routing the outputs from octopre and 18i20 via Focusrite Control; you will have to do some investigative work, but Focusrite Control would be a good starting point. Wish I had a straight answer for you, but you have a unique setup. Good luck.

7 ай бұрын

@@aqeeljohn-johnnyb3433 thank you, I should have read manual before buying. These are only analog outputs from preamps, there is no option to custom route it. It's also implied by ADAT connections. These are one direction only. Also, what's surprised me, the 18i20 allows only 6 custom output routings. So for my setup I would have to constantly switching between analog or daw outputs. So I started to build custom unit to mix playback and analog source for each channel. This setup is straightforward on small interfaces, didn't expect it to be so convoluted on 18i20.

@aqeeljohn-johnnyb3433 7 ай бұрын

@ Jeez man, the things we musicians an d producers have to learn and go through. Then people say people at NASA are smart, what about us;) Good luck man. I am subscribing to your channel, hope you can return the favor. Cheers.

@jackboucher2831 7 ай бұрын

I need help hooking a 18i20 t0 an 18i20 to make 16 tracks

@aqeeljohn-johnnyb3433 7 ай бұрын

Hey thanks for reaching out, I have never tried to hook two 18i20s together. I know 18i20 is expandable, but can the two of them be connected together, I don't know. Do you already have two 18i20s?