▶️Scooter Won't Start Stator Repair (3 Reasons Why No Spark)🔧

No video

▶️Scooter Won't Start Stator Repair (3 Reasons Why No Spark)🔧

Рет қаралды 489,630

Күн бұрын

▶️Scooter Won't Start Stator Repair (3 Reasons Why No Spark)🔧. When your scooter won't start it can be confusing and a complicated diagnosis sometimes. Here I make it a lot easier on you with 3 common causes and this run down and repair of the stator/magneto. In my case the stator had the correct resistance numbers on the meter, but still was broken and needed a replacement. The scooter in this video is a 2013 Peace Sport 49cc 139qmb engine.
🛒Shop This Video: www.nthefastla...
😃How To Know For Sure You're On Your Way To Heaven😃
www.nthefastla...
🛴QUALITY AFFORDABLE E-SCOOTERS ATVs DIRT BIKES AND MORE🛵
mototecusa.com...
🔥 NTHEFASTLANE'S TOP RECOMMENDED SCAN TOOLS 🔥
shrsl.com/47gmf
🔥 NTHEFASTLANE'S TOP AUTOMOTIVE TOOLS 🔥
🔧www.nthefastla...
📽️Nthefastlane Product Reviews:
www.nthefastla...
🛒Nthefastlane's Amazon Store🛒
amzn.to/3BT3Lz1
🚨 NTHEFASTLANE'S TOP PICKS 🚨
Auto Repair Manuals: amzn.to/46RXkvC
Keys/Remotes: shrsl.com/29x75
Find Any Leak: amzn.to/3kWWAkU
LED Headlight Bulbs: amzn.to/3I4Hpg9
Brake Pads & Rotors: shrsl.com/29x6w
Radar/Laser Detector: amzn.to/3oWa1kb
Subwoofer Audio: amzn.to/3I8BIha
Car Stereo System: amzn.to/3s0t8LR
Car Audio Amplifier: amzn.to/3gYlZVV
Video Editor I Use: amzn.to/36vHlZ3
👕Nthefastlane Merch: / @nthefastlane
📧Join Nthefastlane's E-mailing List (No Spam): www.nthefastla...
Website: www.Nthefastla...
Forum: www.nthefastla...
Troubleshooting Guide: www.nthefastla...
Honda Database: www.nthefastla...
Facebook: / nthefastlane
Instagram: / nthefastlane
Tiktok: / nthefastlane
Twitter: / nthefastlaneceo
(Honda Torque Specs App For Android)
LINK: tinyurl.com/y77...
*As an Amazon Associate Nthefastlane earns from qualifying purchases.
*Nthefastlane makes Commission on most links in the description and comments.
Due to factors beyond the control of NTHEFASTLANE, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Nthefastlane assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. NTHEFASTLANE recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of NTHEFASTLANE , no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not NTHEFASTLANE.
#ScooterWontStart #NoStart #Nthefastlane

Пікірлер: 187

@Nthefastlane 4 жыл бұрын

🛒Shop This Video: www.nthefastlane.com/scooter-wont-start-repair-store 🛒Find Any Leak: amzn.to/3JADlYm 🛒Download Auto Repair Manuals: shrsl.com/3wmrj 🛒Visit Nthefastlane's Amazon Store: amzn.to/3pP4UCy

@thomascory1981 3 жыл бұрын

07 yamaha moped, if i hit the start button, it has spark for 1 or 2 revolutions and then is gone. If i the start button again, it has spark for 1 or 2 revs then gone. It constantly does this. Any ideas?

@ogbigtsbikesandstuff887 Жыл бұрын

Great video! I have a 1986 Yamaha CE50 - can you provide me with the Nthefastlane link for cdi/coil/stator "bundle ignition repair kit"? I'd love to be able to buy this from your store. Subbed!

@ogbigtsbikesandstuff887 Жыл бұрын

Oh, and a link to a 5 wire starter from the Nthefastlane store for the 1986 Yamaha CE50 too, please!

@mrbigfoot2361 7 жыл бұрын

I have a 150cc GY6 Chinese scooter that suddenly was not making spark. After watching umpteen videos and checking all ground connections, replacing the CDI, spark plug, coil, stator, starter relay and still not getting results a week later, I discovered a wire going to a switch on the side kick-stand. As it turns out, there is a safety switch on the side kick-stand to prevent the scooter from starting with both wheels on the ground and no rider when the stand is down. The starter will still turn-over but will not provide spark to the spark-plug. I wish some of these electrical trouble shooting videos would mention this switch as it would have saved me a week of time and considerable money.

@Nthefastlane 7 жыл бұрын

+Mr. Bigfoot I'm not sure the 50cc's have this kick stand switch. I'll have to check that out. Appreciate you mentioning it for others to read, as you know, wasting time can be very frustrating. I remember several years ago I had a AC issue, where every once in awhile the a/c compressor would kick on, but it would kick back off immediately. It turned out, that the coolant temp sensor in the center of the cylinder head was slightly disconnected, and that was causing the whole issue. It turns out, the coolant temp sensor ran off the same wire that the a/c clutch did. Found out through several days of looking at schematics.

@kevinstearns4198 5 жыл бұрын

at least u have spare parts now. i took that fukin thing off the kick stand.

@vinkotomicic918 4 жыл бұрын

Ovaj prikaz sam tražio od vas i konačno ga sada imam. Zaista imate sve video prikaze odlične i poučne ,te vas u potpunosti pohvaljujem!!

@vinkotomicic918 4 жыл бұрын

Sada mi je sve jasno, osim što ne razumijem koji radabciger i sa kakvim navojem se koristi za skidanje kape na statora alternatora za skuter Sanli SL50 qt.8 Silvestrone!!?

@robs.201 6 жыл бұрын

DON"T EVER START SCREWS WITH A POWERTOOL...ALWAYS START THEM BY HAND!!!! And another good tip is don't tighten your tire-lugs with a powertool, if you have to change the tire on the side of the road it will be too tight to remove by hand.

@miguel360kmc 5 жыл бұрын

I use a screw gun (not a drill) so far its been fine

@emzgalante2640 Жыл бұрын

Very True, Great Advice ⭐️

@mslaureen1 6 жыл бұрын

Thank you for your video! I've finally learned something of what that box thing does. But for us, mechanically illiterate, folk... Some models just require the break to be held while pushing the start button. Dang... who knew the last thing I checked, was the one thing that worked! I'll be watching you.

@s.f.morris7331 Жыл бұрын

haha like me as well Laureen. I acquired this Jonway Scooter and all summer long video after video of trouble shooting and the one video I kept skipping over was the one on the battery only because well I just bought this battery but I kept tryin to start it straining it, not charging it thinking it was new I didnt need to. when I finally watched the video it said the battery needs to be charged to about 12.65 or something around that I dont remember now but I checked mine with multi meter and sure enough it was below 12. and thought son of a b.....! all summer! took it to a shop cause I didnt have a battery charger then they fully charged it took it home put it in and bam! started right up but it was winter at that point. lol then In spring was riding along going down this big hill full throttle (probably not a good idea) but heard something pop and then high winding sound and throttle was making it move anymore because I just popped the drive belt and had to push it home after coasting as far as I could coming back up the hill then it sat and still is sitting nearly 5 years. crazy. but I got it running again ...well kinda...

@guymonticello4129 2 жыл бұрын

This is a great video very informative he is very knowledgeable and knows how to teach doesn't jump from one thing to another gives you a full explanation.. thank you for making this video for all of us.. I subscribed I'm waiting for more..

@MiguelBricaBrac 6 жыл бұрын

Thank you for the video. I am new to scooters and this video helped out a bunch.

@jorgecastro1894 5 жыл бұрын

Great video, very informative, thank you very much!

@DJSKRECORDS 2 жыл бұрын

that first trick is a new one for me thanks dude the spark plug trick nice

@Nthefastlane 2 жыл бұрын

Anytime DJSK.

@jay8a901 Жыл бұрын

@@Nthefastlane can u get shocked by holding the screwdriver for checking spark??

@drrd4062 7 ай бұрын

CDI Capacitor Discharge Ignition. Always test from the back side of the connectors.

@lawrencebiesecker163 2 жыл бұрын

Good teacher you explained everything very well n

@eddiejoeplebani497 6 жыл бұрын

Kind Sir, i don't usually leave comments... However I felt compelled to say BRAVO !!!!!!! This was by far the most complete and enjoyable how to video on scooter repair i have EVER seen. I am going to look for as many of your videos as i can find for the sheer pleasure of watching and learning from you. I have 2 Kymco scooters and am in need of some advise as to why they are not starting, can you answer me this question? Aside from the fact that there are the different manufactures aren"t scooter motors basically the same"ish? I mean conceptually.

@Nthefastlane 6 жыл бұрын

Thank you! Yes, pretty much all 2 stroke and 4 stroke engines all have the same design if we were to compare (EFI) and carburetor . Most carburetors are interchangeable from Honda, to even the GY6 Chinese scooters. For more scooter videos, go to my website, look at the top for "Automotive Repair Videos" and select the (Scooter category). LINK: www.Nthefastlane.com

@johngorczyca784 3 жыл бұрын

When testing the plug you can use "T" push pins, they will not enlarge the hole

@josepeixoto3384 Жыл бұрын

Both stators were good; the Ohms tests proved that. Stators very seldom go bad if they are not all blackened and burned; my guess is that it was a bad connection somewhere, and that it came back later on to fail to start again.

@Nthefastlane Жыл бұрын

The first stator was bad. After replacing it with a new stator, the problem never returned, even till today. If I remember right, off camera I put the old stator back on after getting it running with the new stator and the old stator still would not work.

@juanmartinjardim Жыл бұрын

It was probably your pick up coil. Needs to be 150 ohms

@juanmartinjardim Жыл бұрын

I think your cdi needs atleast 50vac to work. Mine had 36vac and would not power the cdi.

@johneller6677 5 жыл бұрын

I thought it was a great video..My scooter won't start after a rain or if it is really humid, normally really in the morning with the dew. Any thoughts on that? Seems fine in dry weather

@Nthefastlane 5 жыл бұрын

Three things, stator could be getting wet and shorting out, ignition coil and spark plug wire could be getting wet and shorting out, and lastly the CDI underneath the floor mat where your feet go could be getting wet and shorting out. Check those three things to see if they're getting damp, or any water is in the connectors.

@filippocunsolo6764 4 жыл бұрын

I have a 05 Yamaha Zuma scooter everything comes on but it will not start up. Need help with it

@NorthSurvival 2 жыл бұрын

Hello, I have a problem, I have a Peugeot Speedfight 1 100cc that recently seized up/heat seized. It was not tuned. I then changed the cylinder, piston etc. It now starts up right away, but after a while it dies all of a sudden (as if you had turned off the key) and then I can start it right up again, this usually happens when I go over 60 km/h or uphill. When I changed the cylinder etc, I also cleaned everything thoroughly, such as the carburettor, intake, new air filter, new fuel filter (there was no fuel filter before) new spark plug. I also removed the oil pump and put a metalplate with a gasket over the hole instead, I now mix the oil directly into the gasoline. Some other info that might be important. - When I drive over 60 km/h, it starts to make a noise from the variator (CVT), it´s sounds quite a lot. - When it died, I tried to start it again while it was rolling and then it started right away, but it made a noise from the variator, like something "let go" that had been seized up, like a rubber sound, maybe from the belt. - The variator belt touches the variator cover on the inside and has grinded a cut in the metal. - In the variator, where the weights are, the belt does not go down to the bottom of the wheel. - The clutch bell had turned blue from the heat. - The place where the connecting rod attaches to the crankshaft had turned blue from heat. - There was no fuel filter on it before. But i now saw there is an internal fuel filter in the gastank, can it affect the vacuum if you now have 2 fuel filters. Please help me. Regards Andree.

@TheMweb55 7 ай бұрын

Hello. Great video mate thanks!. I am looking for an opinion about my current situation with a mechanic. Recently my scooter stopped working at the side of the road. The lights came on the display, everything normal, but it just would not start. No noise at all. Took it to a mechanic who said they are 99% sure it is the ECU. I bought ECU £360 ( not cheap ). They put it on and said it has got the fuel pump working again but still the scooter isn't working. They have had my scooter for a long time, and now they are saying it is the generator I need. Now I am looking at buying one for £200 ( not cheap ). I am now getting suspicious. Did it really need a ECU? I think they took a guess and made me buy one when it wasn't needed. I think the fuel pump story is a cover up. They are saying that if I get a generator it may still need something else like a new wiring loom or something. Seriously I am supposed to buy these things one after the other with cash I do not have? The scooter has done 59000 miles, but the engine was changed at 50000, so the stator ( generator ) has not got much use at all. My previous stator was still fine after 500000, which I no longer have. Here is what I cannot get my head round. What are the odds that when I pulled up at the side of the road to have a short rest, both the ECU and the generator packed in at the same time? I just cannot believe this is the case. Especially when the generator has done such low milage. My scooter is at a garage in bits, and I now feel reluctant to buy this generator for them to put in. I have lost my trust and faith in the company. Please can you give me your opinion on both these parts failing at the exact same time I pulled over? Am I right to feel suspicious? Many thanks

@Nthefastlane 7 ай бұрын

What's the Make/Model and Year of your scooter?

@TheMweb55 7 ай бұрын

@@Nthefastlane Thanks for replying. The make and model is Piaggio Medley and it is the year 2017

@Nthefastlane 7 ай бұрын

It could be a whole host of things. The first thing I would ask them is to replace the new parts with your old parts, since the new parts did not fix the issue. That's what we call "Throwing Parts At It". Have them only charge you for diagnostic labor. The first steps I would have taken with this type of troubleshooting would be: 1) Check and see if the fuel pump primes and produces fuel out of the fuel line. 2) Turn the engine over and see if it's producing any spark from the spark plug. 3) Test to make sure the ECU is getting 12v. 4) Test the resistance on the coil pack. 5) Check to make sure the bike has a good ground. 6) Test the resistance of the stator. 7) Since this bike is (EFI) *electronic fuel injected, I would place an injector test light on the fuel clip and turn the engine over to see if the ECU is pulsing the injectors. 8) If the ECU is getting 12v then you can pull up a wiring schematics for the ECU and find out which wires lead to the injectors and which wires lead to the coil. Test and make sure the proper output voltage is being supplied. 9) This should probably be the first thing to do. Run a compression test just to make sure the cylinder has the correct compression. Too low of compression and the bike won't fire. 10) Set a multimeter to continuity and test for any breaks in the wires. This can also be performed with an induction meter. Running the tester along the wires, it will detect a break in the wire if there is one. Hope this gives you a good reference.

@TheMweb55 7 ай бұрын

Still cannot come to terms with the fact that an ECU would pack in the very same time as the generator. More chance of winning the lottery surely

@mv4463 11 ай бұрын

Hard to find parts for a honda gyroS... 1985.. with 9k miles is not youle standard built scooter... 😢 but I was fun when it ran.. just been sitting. But did get a new battery, plus and coil

@carlatkins4078 4 жыл бұрын

Question- will a stock 8 pole stator with matching cdi work on a gy6 150 c.c. kymco. If not why not. If so. Would I also have to change the voltage regulator.

@rtcfpv1012 3 жыл бұрын

Very clear step by step tutorial. Thanks.

@jaycsmith5303 2 жыл бұрын

Hi my scooter starts but battery dnt charge please help

@dwaynedouglas9837 5 жыл бұрын

I cant get my kymco 250cc scooter to start. my friend was riding it and hit a pothole and the scooter shut off. I haven't been able to get it started since?

@ianwilkinson5549 3 жыл бұрын

Thank you for the great video very helpful.

@genemcdonal3180 2 ай бұрын

Hi don’t know what stator I need can u help out I have a 2009 50 Beamer 3 thanks gene

@badgrandpa-fx1ke 2 жыл бұрын

Very nice.easy to follow

@phillipbaxter8413 4 жыл бұрын

2018 TaoTao motor scooter won't start new battery starts fine with a jump runs fine when it starts

@stephennicolas5425 5 жыл бұрын

I have an Eton Beemer. There is a black & yellow wire connection hanging down by the fan. Where or what does it connect to?

@sergiocoronado582 5 жыл бұрын

Black and yellow usally goes to the spark coil

@alexrobles3141 Жыл бұрын

I had the same problem on mine. I replace the spark plug cdi box and spark plug coil. My moped doesn’t have the stator there is no videos about my moped stator. Luckily I just recharge my battery and that was it my moped if fix. But it is Wierd that it doesn’t have a stator as all the mopeds I’ve seen on this videos 2016 sym hd200 Evo.

@kevinstearns4198 5 жыл бұрын

your right 3 things y a scooter wont start cdi stator coil. check the air gap between the flywheel and pick up.

@kevinstearns4198 5 жыл бұрын

i just replaced the cdi 3 months ago last week it fuked up. i uhooked the wires from the stator used a multimeter it was good i checked the the other wires cdi didnt have a reading this shit isnt difficult. 90percent when u have no spark its that cheap piece of shit cdi.

@michael-en4kq 5 жыл бұрын

ok I did all these things and tried 3 cdi boxes and 3 stators its driving me nutz whats my nex step

@GONE_LIKE_JOHN 5 жыл бұрын

michael coffin check you have a good earth connection

@scottadams1031 4 жыл бұрын

will the ignition kit you recommended on shop this video work on a 06' SYM RS 50cc scooter?

@isrealperez9069 Ай бұрын

Why can't I find the right information I have spark no problem I start up the vehicle and kicks in and then it dies but when it starts up a little bit I push the throttle and it dies with a new carburetor I get plenty of gas but what's wrong with it

@s.f.morris7331 Жыл бұрын

what would you recommend if after taking the white plastic fan with the four screws off and the bolt holding the magneto in is so stripped that you cant get it off to even get to the stator? mine is so stripped ive broken sockets and the bolt is round no edges anymore. I even bought a bolt removal kit and those won't turn it either. it's driving me bananas and have given up on ideas. will heat work? can you test the stator without having to take it off the bike?

@nathanormiston724 2 жыл бұрын

Do you know much about yamaha tri city 125 2020 edition please? I found 1 vid on them reallly struggling for help

@daverandlett1030 Жыл бұрын

So I have wolf scooter that did not have spark. So I replaced the coil, CDI, and stater still no spark, I also check the kill switch any suggestions?

@morrisreloads Жыл бұрын

Thanx bro bro 🤙

@scTOXIN 3 жыл бұрын

I have a UM Matrix GY6 150cc the lights come on and everything just won’t start up, and seen a wire electrifying with another wire, not sure what the deal is with that.

@bepilc 6 жыл бұрын

How do you know for sure you have AC or DC ignition system? I put in new 8 post stator I gave a blast of starting fluid, it fired up ran for about 3-5 seconds. I tried again, now won't run, no spark.

@Nthefastlane 6 жыл бұрын

If you have DC you will have 12v at the CDI when you turn the key before starting. If it's AC there will be no power at the CDI. This is all accurate as long as everything is working properly and your battery is putting it 12v. AC doesn't need a battery for the bike to run and generate power, DC needs a battery to run.

@Nthefastlane 6 жыл бұрын

Also, DC does not have a red wire that goes to the CDI and back to the stator.

@mickeymcbreairty4851 6 жыл бұрын

Won.t start. Plentt of fire but the gas doesn't seem to be get to the carburetor

@carlatkins4078 4 жыл бұрын

Can you please explain why there's no ground wire on some gy6 50 cc stators. While on 110cc n up there is a ground wire.

@s.f.morris7331 Жыл бұрын

I dont have one either on my stator. its just got white and yellow but I dont think they are necessary but if they arent then I guess why would some have a green and some not. you ever find out your answer

@JAMTOAM Жыл бұрын

i bost battery it start but then it hold charge abit when i drive it dies then make noise

@jessia4839 6 жыл бұрын

I can't seem to find my specific scooter ANYWHERE online! It's a 2011 kaitong md50qt-5. It only has 300 miles on it and only used premium gas. at this time it won't start up at all since the key was left on accessory and the battery died, after jumping it-nothing but the accessories work. prior to this, the scooter was running and driveable but seemed like it was not getting out of gear or something...It would only go so fast in the first gear...any help would be greatly appreciated or even just being pointed in the right direction to somewhere with information on my specific scooter maybe? thanks! -Jessi

@Nthefastlane 6 жыл бұрын

+Jessi A you may need to check the bus fuse by the battery for corrosion or possibly even blown. As for Gears, I'm not sure if yours has a transmission but the majority of scooters run on variators. Basically little roller weights that move up and down allowing the variator to move in and out moving the belt higher or lower. It could be that your roller weights have flat spots and are getting stuck.

@anthonylangtons2086 6 жыл бұрын

Jessi A wathyouwantforit B Good x

@ahmodahmed1453 4 жыл бұрын

very good and thanks

@jesusRodriguez-xc2eu 5 жыл бұрын

Nice video

@HookupCultureCommunity 3 жыл бұрын

Thanks!! Does having the wrong battery size fry any of these three things over time??

@SLAYER-nm5zw Жыл бұрын

My scooter runs fine but my electric system doesn't so I don't have lights or horn. What could be the problem? 😢

@thomascory1981 3 жыл бұрын

@holylens7050 5 жыл бұрын

Hi my scooter starts with the kick but it won't start with the switch in the morning or it is left for more than 20 min. When it is hot it starts with electric switch. My battery is new. What could be the problem ?

@daviddealba1531 5 жыл бұрын

Maybe the switch/ switch connectors or starter is no good. Test the starter with a wire tapping the + on the battery

@glennpeacock5655 2 жыл бұрын

Changed the stater changed the cdi changed the plug and wire still will not fire?

@andyshinsley5763 4 жыл бұрын

This guys intro is an entire anime finishing move. Super helpful vid

@stevegardiner9627 6 жыл бұрын

Hi it's not a stator remover it's a flywheel remover tool the stator is part of the igntion ok I'm from the uk so we mite say stuff different Cheers Steve

@ochieev3165 3 жыл бұрын

If the stator is wet is it posdible to get damagef or destroyed?

@Sconda75 5 жыл бұрын

Hi, can anyone help. I have no spark. I replaced the stator the CDI the coll and spark plug. I'm not getting 35 volts and don't know why. It's a 2015 wolf 50 cc scooter. Is there anything else in the process I'm not aware of. Thank you

@vdakblade- 4 жыл бұрын

My scooter won’t stator The stater Black and red wire is pulsing positive when theCDI is disconnected once you connect the CDI no pulse comes from the stator Black and red wire please help 🙏🏼

@doubleup5177 3 жыл бұрын

Wil the kit work on a 50cc?

@4virtues4truths27 5 жыл бұрын

Hi sir. A girl sat on my scooter real hard & the ignition switch immediately stop working. However I was able to kick start it twice. I rode for a few miles & it just died. Wont start at all but horn and power is still going thru it. Im confused.

@rodrisling8940 4 жыл бұрын

Great video. I am having a starting problem... I seem to get 1-3 sparks only and then nothing. These 1-3 sparks only occur if you turn the key and immediately hit the start button. If you wait to hit the start button even 2-3 seconds after you turn the key on, zero sparks. I have already replaced the stator, CDI and coil. Because the routine is consistent I am pretty confident it is not wiring? Not sure what else to check or replace?????

@drajo123 2 жыл бұрын

i have same starting problem

@geoepi321975 11 ай бұрын

Check the source coil

@jenniferheinzman8701 Жыл бұрын

Do u have to hold the left brake in order for this scooter to start up

@s.f.morris7331 Жыл бұрын

yes

@crazydonutface Жыл бұрын

ever have a flywheel go bad? , (20 yr old 2T yamaha jog)

@ImpactPlayers 2 жыл бұрын

Is there a difference if the original stator comes with 4 wires and the new stator has 3? It won’t spark

@elisalazar3097 4 жыл бұрын

Wiring harness,was the culprit kept blowing out the fuse at battery

@johnwoo505 6 жыл бұрын

hi i have problem with my yamaha vino 125 2006 has spark has gas good exhaust is good valve is good crank but wont start have the problem for weeks please help thanks REPLY

@Nthefastlane 6 жыл бұрын

+john woo I would say it's your carburetor. Check out my website for all the scooter videos on the carburetor. Link: www.nthefastlane.com/Scooter

@johnwoo505 6 жыл бұрын

hi thanks for replie i change the carburator cdi /coil / valve ajust compression check 140 psi still wont start what can be the problem thanks john

@kachiskid 6 жыл бұрын

Did you ever fix it?

@davemurphy2020 6 жыл бұрын

3.14 'There is resistance in the human body' You can say that again buddy.

@philippealexis 6 жыл бұрын

'There is resistance in the human body'. And it is released when you touch something.

@lishalewis2872 5 жыл бұрын

@@philippealexis food for thought💭

@pamskogen8234 7 жыл бұрын

My tank scooter won't hold a charge. Put in new batterie. I have to jump start to get it started ???

@Nthefastlane 7 жыл бұрын

+Pam Skogen Sounds like your rectifier is bad or your stator. Battery is not getting recharged. Or there is a short somewhere.

@Mrig12000 5 жыл бұрын

I have a 2002 kymco cobra with no spark I replaced the CDI Box Spark Plug Ignition coil and stator. I was thinking its kill switch but when I unplug the right hand control still no spark when I try to crank it it will crank but it will also crank in the off position? Also my battery is very low from trying to crank I hear a click sound coming from the battery compartment but when I kick start it it charges the battery a little bit so it will crank with the electric start any advice?

@sergiocoronado582 5 жыл бұрын

The click is the solinoid asking for power. Check your grounds. All else fails cut the black wire with the white stripe that's the kill switch going to your cdi. It will deactivate every safety component that wont let it start.

@michaelz5692 4 жыл бұрын

Hey buddy I need your help. I recently installed an 80cc big bore kit on my 50cc gy6. I verified the timing, gapped the valves properly, gapped the spark plug properly, oiled my parts. Placed my piston rings properly with all ring gaps away from each other, Checked my fuel lines etc... yet it doesn’t want to start. I tried foot cranking and electric start. I tried starter fluid and nothing. All parts have no cracks and seem good.

@michaelz5692 4 жыл бұрын

Also I have spark, I have compression and fuel...

@12gaugekuntrie61 6 жыл бұрын

I just put a new coil and cdi on mine it gives no spark but the old coil pack starts it

@jknowledgenet2748 5 жыл бұрын

My pcx125 normally you hear the electrical cone on when u put the key to on position and then starts right up, now I can't here it kick on. But ed very once in awhile it will and start right up. Does anyone have any idea what tasty might be

@dumfound4840 5 жыл бұрын

Why are there Ads in 1st 2 min.?

@Nthefastlane 5 жыл бұрын

I checked, it was set to auto ads placement. I went ahead and manually moved them.👍

@danadiddens1376 Жыл бұрын

What's the thread size on the flywheel?

@jc-aquatics191 4 жыл бұрын

So my problem is I just bought a new wire harness and I am getting no power what so ever.

@edilenparra2486 6 жыл бұрын

hola tengo una scoteer new porches 150cc ella no bota chispa porque sera

@williamsturgell3776 6 жыл бұрын

Mine won't start unless I keep charging the battery. When battery is charged a . d scooter starts, the lights are dim and only get bright when I give it gas. As soon as I let off the throttle, the lights get dim again. What do I need to do to fix this issue ???

@Nthefastlane 6 жыл бұрын

It's very possible you have a dead cell in your battery. I would have the battery tested at a local auto parts store or even Walmart TLE can test it for you free of charge.

@allendrummond7271 6 жыл бұрын

I checked the voltage coming out a.c. it just was jumping all over couldn't get a reading mine 50cc scooter will kick start but want fire up by turning it over I replaced the coil wire plug cdi oh and it cut off driving down the road up a hill do you think I need to replace the stator

@Nthefastlane 6 жыл бұрын

Stator or your ignition module, aka "ignition key". I'd check the kill switch first, could be bad.

@jeffkrauss5582 3 жыл бұрын

I have a 2017 taotao 50cc I'm getting intermittent spark I've changed the stator, spark plug,coil,solenoid and still can't figure it out what am I missing

@fred5114 2 жыл бұрын

money to pay for a new moped

@GoogleEarthfact. 5 жыл бұрын

Good sir

@shortdawg6172 3 жыл бұрын

Where did you get the new stator from I can’t seem to find it online I have the same exact peace sport scooter?

@stanleyrodriguez9588 3 жыл бұрын

Dónde puedo encontrar la pieza

@stanleyrodriguez9588 3 жыл бұрын

Dónde puedo encontrar la pieza

@shortdawg6172 3 жыл бұрын

@nct9466 3 жыл бұрын

Just change CDI to DC and China has a CDI direct replacement n connect to red wire to DC from ignition on + So no need to replace the stator (AC part if failed)

@michaelfortes5486 4 жыл бұрын

My 50cc Solana 2018 wont start by only by kick start what do I do

@jaredlecuyer 4 жыл бұрын

Hey I'm currently working with an issue with starting my scooter. It's practically new. I was changing the variator rollers and I decided it was a good idea to use the flywheel as a way to hold it to get the nut off the variator. When I put the plastic piece back on the flywheel I accidentally used a longer bolt, then tried starting it. I noticed later the stator was a little ripped up. It doesn't start now, so could this be my issue why it doesn't start? Btw it started right before I decided to do this change in rollers

@davidk1579 2 жыл бұрын

However you look at it you going to need a new stator put a new one on order it off of eBay not a big deal

@s.f.morris7331 Жыл бұрын

wait arent the variator rollers on the other side of the bike where the clutch and kick start are? the flywheel and stator are on the other side with the oil dipstick.

@candicejames363 5 жыл бұрын

Im getting spark but won’t turn over bought a new battery for it and as soon as you jump it with a car battery (without the car being on) it’ll start like it’s brand new can you help me?

@dustinm5144 2 жыл бұрын

I'm having the exact same problem

@johnpaulmartiinez5535 3 жыл бұрын

what if you have spark but it dont park on every kick its every other kick it sparks

@SportStar- 7 жыл бұрын

I have spark , petrol in , clean carburetor, new fuel filters, clean oil tank and new oil . Scooter haven't been used about 1 year and stayed outside. I can't get it started, what should I check more?thx

@Nthefastlane 7 жыл бұрын

Aurelian T Change all the fuel lines and fuel filter. First, remove the carb filter, spray either/starting fluid or even brake cleaner into the carb and crank. See if you're getting enough spark, sometimes the spark can be weak. Also, carburetors are really tuff to get clean. Make sure you take the main and idle jet completely out, hit them with a torch untill they turn red, then cool down and repeat. After that, take a welding tip cleaner kit, find the right size and put it inside the tiny jets to clean them out, make sure you don't make them any bigger then they are, or you will change the fuel ratio. Hope this helps.

@AbdulRahman-ex6yo 6 жыл бұрын

Its probably the battery ..

@Handy92079 6 жыл бұрын

Check the compression

@youngjj757 6 жыл бұрын

What was the problem?

@mikesuzio2566 5 жыл бұрын

sell it on Craigslist as is for like $150 see if someone else can figure which one out of 8 things can be wrong...these mopeds usually work for 2-4k thousand miles all sorts stuff wrong after that

@chrislavalley4062 Жыл бұрын

If it's a high resistance that's that mean it's bad 2.5

@AnthonyJohnson-py4yh 5 жыл бұрын

Kick stand needs to be up!

@IsabellaaaRider 5 жыл бұрын

Why?

@Badassbass79 6 жыл бұрын

I have a 2010 50 cc toa toa scooter,I can't get it to turn over ,or start.I check my spark lug still doesn't fire. I changed everything on it,still the same.idk what it is,do anybody know?

@sergiocoronado582 5 жыл бұрын

Cut the black wire with the white stripe. That's the safety switch activator. If that dosnt fix it could be the coil or the cdi itself also the stator

@audreykarijodjemiko7658 5 жыл бұрын

Scooter won't start spark pug or black and i put a new cdi box and or won't start want is the probleem?pleas help

@IsabellaaaRider 5 жыл бұрын

Dude just get a mechanic. KZfaq comments will only waste your time, good luck fam hope it works out.

@miguelr1490 Жыл бұрын

8mm bolts

@amonikhebrann6796 4 жыл бұрын

I need to no getting current but not starting

@chrispayne2269 3 жыл бұрын

my scooter has spark it was running perfect I parked in the driveway went in the house change clothes came back out and it's never started again

@chrisgerardy2768 3 жыл бұрын

I have spark but still won't fire ?

@1983bigfrank 4 жыл бұрын

One thing are these Clips connected to your battery

@mheldagulam9996 3 жыл бұрын

Hello how to arrange stator lose pls notice me im pilipino piago zip user

@matthewwilliams8508 4 жыл бұрын

what size fuse I need

@dapv144 3 жыл бұрын

Usually 10amp is more than enough.

@filippocunsolo6764 4 жыл бұрын

My scooter will not start up and I did everything to it. And still no start

@frankienewland8350 5 жыл бұрын

I have a gilera runner all it’s doing is clicking when I try to start it

@sergiocoronado582 5 жыл бұрын

Check your -grounds to make good contact.

@Myticalweedwizard 2 жыл бұрын

I need help

@TheMacgyver3441 3 жыл бұрын

I watch this video and learn how to make my scooter go WAY faster. Update one thing in the CVT and away it goes 40mph. 😂 but really

@drebay25x51 2 жыл бұрын

Do a video i need to get mine faster

@azonipse1234 6 жыл бұрын

I own a 150cc 2009/ZHNG, it was working fine before just needed a new battery the owner that owned it before me had it sitting outside for 3 months, didn't even bother using it. I changed the battery (changed oil and fuel to be safe and cleaned it a bit.) and it was working OK, but suddenly it stopped. I tried to start it up ONCE, i hear a sound like its trying its a very brief moment, then suddenly NOTHING. won't even try to make the sound again. I can try to do it again but it'll only make the sound of trying to start once every few hours, then it'll shut itself off. won't even crank. I don't know what the issue can be I'm going to try to change the spark plug it may have gotten wet. if you have any tips i'll gladly take it.

@orangestoneface 5 жыл бұрын

cdi borrow any other to test insted of y ours