How to Create and Edit Panel Borders in Clip Studio Paint

Рет қаралды 130,556

5 жыл бұрын

Since I'm getting a LOT of questions about it, the Page system on the left is part of EX and isn't available on the Pro version of Clip Studio Paint. If you have EX, just tick to Multiple Pages checkbox on the New Page dialogue box when you have Comic at the top (by Use of Work). I you don't have EX, you can just save a Preset for your pages, so they're all consistent. Hopefully that helps!
- -
Hey guys! I've put together this pretty thorough overview of how to create comic panel borders and edit them in Clip Studio Paint. In this video, I go over how to set up your page to use borders, create the initial panel border, divide panel borders equally and on your own, as well as using your own brushes to make panel borders.
Hopefully this is helpful! If you have any questions or comments, please leave them below. Thanks!
== See my Panel Borders in action in my superhero webcomic: nightsmokecomic.com
== Get the custom brushes that I use in Clip Studio Paint: gumroad.com/l/scottcspbrushes

Пікірлер: 401

@Bluedotred Жыл бұрын

Borders, done in 15 minutes, no nonsense. Love it! Subscribed

@alexlikesdrawing6264 5 жыл бұрын

Dude, you're underrated *as hell*

@ScottD 5 жыл бұрын

Haha thanks! Hopefully I'll be overrated soon! ;)

@thespookycore4344 8 ай бұрын

For those who have a newer version like me, the "work with other frame borders" under operation -> object doesn't exist. If you want to toggle the same thing, got to "keep gutters aligned" right above draw border.

@muundus7 7 ай бұрын

thanks dude

@Channel51_LA 3 жыл бұрын

Thank you so much for making this video! I have been using CSP-Pro for years and I've never figured out how to utilize the panel borders properly. You explained it very clearly and I'm finally using them the right way now. Thank you!

@ScottD 3 жыл бұрын

Awesome!

@chorigod8341 Жыл бұрын

Dude you saved my life, everything I wanted to watch about how to make panel borders is here. Thank you very much!

@morgandea 4 жыл бұрын

You're the first link to come up when I searched for info on how to use comic frames, and you just blew my whole mind. Thank you for this *O*

@ScottD 4 жыл бұрын

Awesome! Glad to hear the video is so highly ranked and that it was helpful. :)

@spiritwardiaries 5 жыл бұрын

7:15 !!!! Thank you!!!! Have been looking for a while to turn off those darker purple borders around my smaller panels lol! Was really getting on my nerves. Thanks for the video. New subscriber :)

@ScottD 5 жыл бұрын

Awesome! Thanks! Glad it was helpful. Those borders can be so annoying! :)

@OneHandMedia 4 жыл бұрын

Me too :)

@akirauzumaki3805 3 жыл бұрын

Thank you! you're a life-savior dude! I'm really glad google recommended me your tutorial ^^

@GonzPaoli 4 жыл бұрын

This is the perfect teaching style for me... clear, to-the-point, thorough. Thank you!

@ScottD 4 жыл бұрын

Awesome! Glad it worked for ya!

@ScottD 4 жыл бұрын

A lot of people are asking about the Window with all the Pages on it on the left and "Work with Other Frame Borders"! The window is part of the Story Mode in the "EX" Version of Clip Studio Paint. You get it by selecting Multiple Pages. If you have the "Pro" version, you can't do this, but you can simply save your template and use that template when you're making a new page. Work with Other Frame Borders was changed to "Keep Gutters Aligned." Now you can change that to "None," "Horizontal and Adjacent" or "All." Gives you a few more options. Hope that helps!

@bloodnessx 2 жыл бұрын

for 4:30 where can i find it in the current CS? and 11:44 to not mess with other frames

@Astr0_AWBW 2 жыл бұрын

thank you

@Pramyrworld Ай бұрын

😂

@woodworkmountain Жыл бұрын

Thanks! You had exactly what I was looking for with panels under/overlapping @11:50

@authorJLAllen 2 жыл бұрын

This is the most helpful video I have ever found on youtube and I'm not even exaggerating. New to digital comics? Save this to your favourties.

@ScottD 2 жыл бұрын

Thanks so much! Glad it helped! :D

@lauriehertz2578 4 жыл бұрын

You are my new hero! I've been making zines by hand for many years and bought Clip Studio two years ago but got so frustrated trying to learn it that I gave up. You've inspired me to give it another go. I'm going to attach a second monitor so I can try this again and follow along with your instructions. Great work and keep it up. Hugs and kisses. ***Happy Dance***

@ScottD 4 жыл бұрын

Awesome, Laurie! Good luck and hit me up if you have any questions! :)

@olliecollins2 3 жыл бұрын

Excellent video! Thanks for the divide border tip!

@KaolaRivas 3 жыл бұрын

Thank you!! After years I have been able to find someone explaining this! I was always hand-drawing my panels since the vector lines look a little off putting with my textured ink brush and I had to hand-draw every single line!

@ScottD 3 жыл бұрын

No worries! Glad it helped! :)

@brienneavril7129 2 жыл бұрын

Man u saved my life I couldn't understand how to make panels i was going insane, this vid really helped! Thanks!

@JasonMayDraw 4 жыл бұрын

Thanks man. Finally making the switch to Clip Studio after owning it for years. Should make comics easier as soon as I get a grasp on it. Great video.

@ScottD 4 жыл бұрын

Awesome! Yeah, it takes a bit to get used to it, but it's totally worth it, IMHO. And thanks so much! :)

@AromaticAsthmatic 3 жыл бұрын

This was SO HELPFUL. I have used Photoshop for years & I am giving CSP a try for the first time. Thank your for helping me along!

@ScottD 3 жыл бұрын

No worries! Happy to help! :)

@AromaticAsthmatic 3 жыл бұрын

@@ScottD 🤘🤘

@moadeeb2002 3 жыл бұрын

Great vid, great help man. You give an excellent place to start, thank you!

@celynbrazier 2 жыл бұрын

Thank you Scott!! Super helpful and perfectly explained :)

@helsiclife 2 жыл бұрын

oh my god, is like having Indesing + Photoshop + Illustrator in one! I'm so excited to use this software!

@harmagician1 3 жыл бұрын

Scott you're the man. Without this video I would be lost on how to set up my panels. Thanks!

@ScottD 3 жыл бұрын

Haha awesome! And thank you for watching! :)

@anj1273 4 жыл бұрын

This was very helpful, thank you so much!

@aopaul 2 жыл бұрын

Equal panel borders at 5:55 was an awesome tip. (and of course the page set up at 2:15 )

@SkylarMixtape 2 жыл бұрын

A video explaining everything in the operations & move layer features in CS would be awesome! I can find any videos that go in depth. & Auto-actions 😅

@moohy 5 жыл бұрын

This is a really useful tutorial, thank you so much!

@ScottD 5 жыл бұрын

Great! I'm glad it helped! :)

@cookrite33 3 жыл бұрын

Thanks for the tips. I really enjoy your videos.

@hannahasakura Жыл бұрын

thank you! I'm still learning and this is very helpful!

@ryderstrickland6617 4 жыл бұрын

Excellent, just what I wanted to learn and more! Thanks!

@ScottD 4 жыл бұрын

Awesome! I'm glad!

@cheychc 3 жыл бұрын

this was so helpful! Thank you so much :)

@fernandasofiaruizrios1459 Жыл бұрын

Straight to the point, thanks!!

@dougthespade3273 11 ай бұрын

This video was really helpful, thanks

@sargentoromulo Жыл бұрын

Cool. Very nice explanation.

@KyubumLee 11 ай бұрын

Super useful. Thank you so much

@MATTCOSSIN 2 жыл бұрын

Great Vid! Very Informative, thanks!

@tsiga1550 4 жыл бұрын

a great quick tutorial, just what I needed.

@ScottD 4 жыл бұрын

Thanks! Good to hear!

@GhanimehDesigns 3 жыл бұрын

This was so helpful thank you so much

@mirkakim7991 3 жыл бұрын

thanks so much! This was really helpful

@notan... 3 жыл бұрын

Dude, thank you - so helpful!

@trashmito 3 жыл бұрын

Very helpful, thank you!

@yunyao1474 3 жыл бұрын

thank you!!! this helped soooo much

@npunktrpunkt3521 4 жыл бұрын

Best tutorial. Thanks for that

@teris21100 4 жыл бұрын

Dude you are my God. Realy helpful video thank you

@AnthonyTackett 5 жыл бұрын

Great tip! Thanks for the video.

@cleverevans 3 жыл бұрын

This is sooooo helpful. I really appreciate this tutorial. Thank you so much!

@ScottD 3 жыл бұрын

Good! Glad it helped! :)

@ScottD 3 жыл бұрын

KZfaq seems to have eaten your question that I just got (or I can't seem to find it), but whether you can change away from mm to inches depends on the "Use of Work" you select for some reason. "Illustration" and "Show All Comic Settings" should let you switch from mm.

@cleverevans 3 жыл бұрын

@@ScottD Ah, I figured it out and didn't want to fill the comments with cruft, so I deleted it. THANK YOU for being so helpful.

@hanakarnon 4 жыл бұрын

Thank you for the video! It helped me a lot to understand everything I didn't to make comics on CSP! lol

@ScottD 4 жыл бұрын

Awesome! :)

@realswobby 5 жыл бұрын

Thank you for your tips, it's very helpful :)

@ScottD 5 жыл бұрын

No prob! Glad it helped! :)

@MarkDaviesArt 3 жыл бұрын

Nice video buddy, think I need to upgrade to EX

@TheVeyZ 2 жыл бұрын

Thank you! omg this helped so much! you have no idea!

@jon2.059 2 жыл бұрын

Thx for this man!

@DT_2K 3 жыл бұрын

Very helpful, thank you

@ittoshusbando7575 4 жыл бұрын

you're the best! thank you!

@erica2912 2 жыл бұрын

This is so helpful thanks! 😭👏

@ScottD 2 жыл бұрын

Awesome! I'm glad!

@mikecavallaro2885 5 жыл бұрын

Very helpful, thanks!

@ScottD 5 жыл бұрын

Glad it helped!

@kisskolos75 3 жыл бұрын

That was cool! I was clapping at the end. :)

@kiwiurbano4045 2 жыл бұрын

great video! so useful :)

@lostindestiny5446 2 жыл бұрын

Thanks for this helpful video! Your video have saved my life from this program

@Tellin08 5 жыл бұрын

Thank you. This is a better tutorial than the official one that's for sure.

@ScottD 5 жыл бұрын

Ha! Thanks! :D

@DarkPrincessOfLight 3 жыл бұрын

wow dude you are an ALL STAR!! Consider me subscribed :D awesome video super helpful- thanks!!

@silviar9226 3 жыл бұрын

Thank you so much!!

@DirkHooper Жыл бұрын

Holy cats! That helps so much! Thank you!

@futureland5024 2 жыл бұрын

😍 Thank you so much

@martinfijko 10 ай бұрын

Thank You!❤

@yannboogie1679 3 жыл бұрын

Thanks for your video :)

@theillustratoryar1382 3 жыл бұрын

Dude, you're underrated as hell Pt2: The ass-saver

@Komikino 3 жыл бұрын

Holy cow! This was informative! Thank you!

@ScottD 3 жыл бұрын

Awesome! Glad it was helpful!

@Komikino 3 жыл бұрын

@@ScottD Do you have a video on what to do with your comic once you have finished it in CSP? How to export it for printing?

@ScottD 3 жыл бұрын

@@Komikino Kind of! kzfaq.info/get/bejne/nauEhcxkmZyynZ8.html I use InDesign to set everything up for print. I export all my pages as flattened PSD (from Photoshop, since I color there), then import into InDesign, like you see in the video, with some extra stuff along the way, like adding page numbers, etc. If you just want to go from CSP to the Printer, I don't have a video on that, unfortunately. But that's a good topic that I should totally cover in the future! :)

@Komikino 3 жыл бұрын

@@ScottD I used your video last night to figure out how to set up my pages for US comic style. Then continued watching for panel layout and how to set those up. Really helpful stuff! Thanks!

@ScottD 3 жыл бұрын

@@Komikino Awesome! So happy it helped!

@yauxu Жыл бұрын

great thanks !

@HombretheArtist 3 жыл бұрын

Great tutorial! Is there a way to create an exact frame dimension? For example, if I wanted a 2-inch by 2-inch frame/panel?

@lucianopeluccio2910 3 жыл бұрын

thankyou so much

@markbeguhl3422 Жыл бұрын

Simply.... Thank You Thank You Thank You.... Thank You.

@bcunningham71 10 ай бұрын

Hi Scott -- fantastic tutorial, thank you so much! Let's say I have a page where I had the "draw border" checked and I wanted to go back and do your "hand-drawn" method. Is there an easy way to uno the drawn borders? Thanks again for these wonderful videos. They are so helpful to me!

@miriamstanley3982 3 жыл бұрын

Awesome. My butt is gonna have to re-watch this a few times for it to set in - but thank you!

@isabelleswanson4694 4 жыл бұрын

thank you SOOO much!!

@ScottD 4 жыл бұрын

No worries! Glad it helped!

@user-gd1rb5mm2e 3 жыл бұрын

Thank you very much for such a helpful video! I'm still having a problem though - I'm trying to merge two panels. My frames are in the same frame border folder, I can select both of them holding shift and everything else seems to be okay - except that nothing happens after I click on Ruler - Frame -> "combine frames". Any ideas what I might be doing wrong?

@asparrow5179 2 жыл бұрын

This is a great tutorial, thank you for helping me understand the panel borders, I was really confused for a while. A question though - when setting out a page with these dimensions, around what size should I be making my text (for talking in speech bubbles)

@ScottD 2 жыл бұрын

I don't usually letter in CSP, but I usually letter in 6.5 pt font in Photoshop at this size, if that's helpful. I think it also depends on the font. You might want to print out a few different sizes and see what looks right on a page, or compare it to a comic page you're trying to emulate.

@korybrown5480 4 жыл бұрын

I’m learning this when I should be on my online classes😂😂 Though imma need a lot more help- my clip studio doesn’t have all the same things for some reason but also this is my first time using the comic part soooo yeahhh

@ScottD 4 жыл бұрын

Ha! At least you're learning something! :) I'm using the EX version, which has some upgraded features. Let me know if there's anything specific you want to learn about!

@korybrown5480 4 жыл бұрын

Scott Drummond oof I have small brain sometimes 😂😂 I have EX too but I think there’s just little differences, yours has more options for some reason but other than that I got most of it figured out!! I’m starting a little comic right now and it’s pretty dandy 👀

@selina3974 3 жыл бұрын

THANK YOU!!!🙏🙏🙏

@ScottD 3 жыл бұрын

No worries!

@joebogle1231 8 ай бұрын

Love the demo. So let's say I create all the frames and want to save the layout so I can use it on other pages. Do you have a video for that?

@Manithan123 5 жыл бұрын

This is the best tutorial on panel borders. Thank you! I am using Clip Studio Paint along with a Wacom Cintiq 22. Is it possible for you to create a tutorial on how to maintain or restore pressure sensitivity? On a regular basis, it's lost and I have to adjust so many things including the brush size. Because of this my drawings are not consistent.

@ScottD 5 жыл бұрын

Thanks so much! I'm glad it was helpful! And that's really weird about the pressure sensitivity. Does it only change after you close Clip? Or when switching tools?

@Manithan123 5 жыл бұрын

@@ScottD This changes after I close the Clip Studio!

@tatjanakorolyuk2094 3 жыл бұрын

Thank you so so much for this!!!

@ScottD 3 жыл бұрын

No worries! Glad it was helpful! Also, I saw your earlier comment (that you may have deleted?) and wanted to let you know you can show/hide your crop marks by going to View > Crop Mark/Default Border. If, instead, you're wanting to hide the crop marks when exporting, make sure to have the Crop Marks box unticked under Output Image in your Export Settings when you're exporting. Hope that helps! :)

@tatjanakorolyuk2094 3 жыл бұрын

@@ScottD Thank you! I figured that I can also just change the whole canvas size to what I want it to afterwards . Thanks a lot, I am looking through all your vids right now, they are super helpful, keep up the great work!!

@ScottD 3 жыл бұрын

@@tatjanakorolyuk2094 Oh wait, I think I misunderstood your question! Do you want CSP to crop your image down to the Crop Marks before Exporting? Because it won't do that automatically, unfortunately. You'll have to go to Edit > Canvas Properties and change your Bleed Width to "0" and make your Canvas Width and Height the same as your Binding Width and Height. Then, you can export and should be good.

@tatjanakorolyuk2094 3 жыл бұрын

Scott Drummond thanks a lot, you are very kind :)

@ScottD 3 жыл бұрын

@@tatjanakorolyuk2094 haha no worries! Happy to help! :)

@GazFaaz Жыл бұрын

Hi, can you help me! I'm trying to resize the panel border. When I try to move one of the corner of the border in a straight line horizontally using the object tool, I can't seem to make it move straight. It always give me a slight angle no matter how careful I try to move it. Is there a way to lock the movement to horizontal/vertical angle only? like to make it move straight? I try to move it while pressing the shift key, which usually lock the angle of movement to be straight, but it didn't work. Sorry for my English, but I hope you understand what I mean.

@Cosmignon 3 жыл бұрын

Hi! Thanks for the helpful tutorial, I've been intimidated away from using the frame tool in CSP but this helped break it down well. I had a question I was curious if you could answer: I'm currently using CSP on a drawing tablet (ipad), so I don't have a shift key to use for snapping the frame divisions at those 90/45 degree angles. Is there any other way I could make those clean frame divisions?

@ScottD 3 жыл бұрын

Yep! You can check the "Step of Angle" box in the Tool Properties panel and set it to 45, so it'll snap to 45/90/etc. Also, if you swipe in from the side of the screen on the iPad, you get a secret CSP menu with the Shift/Alt/Ctrl buttons, plus some extra hot keys that are programmable.

@AcetheWindRider 2 жыл бұрын

Same question but for android

@spiritretro3571 3 жыл бұрын

majorly helped me understand how to craft my own oanels, WAY easier than doing all of this manually

@ScottD 3 жыл бұрын

SO much easier! :)

@sebbb5980 4 жыл бұрын

Let's say that you want to merge two panels to form a sort of L-shape, how do you do that? (I've tried to find a tutorial for that, but they all seem to say "Hold shift while using "Object" to select more than one panel" and it doesn't work, I can't select more than one.)

@SpiffyShortsParodies 5 жыл бұрын

Hey there, got any tips for if a character overlaps the panel border? Do you have to do it on a higher layer, or can you expand the panel mask (doesn't seem to work for me!)

@ScottD 5 жыл бұрын

I’ll usually put those layers above the panel border and then have a white layer in between the inks and panel border to mask off the border. There may be a way to mask the border, but this seems simplest for me, especially since I flatten all my inks before I color. I actually have a video posting tomorrow that shows exactly what you’re talking about, so sub or check back to check it out. :)

@SpiffyShortsParodies 5 жыл бұрын

@@ScottD I'll do that, thanks, the more tips the bettah! I was hoping the panel masks themselves could be editted, it would save on layer clutter up-stream. Alas!

@ScottD 5 жыл бұрын

Yeah, since the panels are basically makes themselves, it doesn't look like it. You could put the panel border folder inside a group, then put a mask on that group, but that might be more trouble than it's worth.

@jonaramire Жыл бұрын

Merci !

@scottball5564 2 жыл бұрын

Question about "work with another frame border" in the object tool? I can't find it. I've been looking all over inside SubTool Detail and as far as I can tell it doesn't come up at all. I have the setting above it which is "snap to other frame borders" but the one you referenced doesn't seem to be there. I did an online search and I see several instances of people asking about where this setting is. Can you offer any insight as to how I can find it, or if they did away with it as a setting? I'm using Clip Studio Paint EX. Thank you, and thank you for the thorough video.

@ScottD 2 жыл бұрын

Correct. They updated the language in the app now, so this video is ever so slightly outdated there. That just means I'll probably have to record a new one!

@bunnywar 5 күн бұрын

Is there anyway to control where the frame folders are created in the layer stack? I don't wan to keep dragging them down from the top every time

@drawingafterSIX 4 жыл бұрын

Thanks for the info. The options you have in the Create New window like Cover Page, Multiple Pages and Story Information etc. I don't have them for some reason. I only have the Canvas and Manga Draft settings, any idea why?

@ScottD 4 жыл бұрын

Multiple pages is only an option in EX

@oksanabula8709 3 жыл бұрын

Thank you for sharing! I would like to ask for advice - I’ve made an artwork in 350 dpi 301x424 mm and when I saved it , brush textures looked blurred. I was trying differt export types- save as, export single layer” choosing first “specify output size, than 350 dpi resolution. Each time the same... Does clip studio anyway will “eat” definition of a page?

@ScottD 3 жыл бұрын

You'll always lose a little definition when saving to a lossy format like JPG. You could try using the settings at the bottom of the export (comic vs illustration) and see if those make a difference. Hope that helps!

@qwertyuiop-ke7fs Жыл бұрын

Great video, but it seems it could use an update, as many of these options are changed or straight up missing. Default inner border size is now missing, and you can't use inches for some page types, only mm. I have CSP EX

@chariots8x230 2 жыл бұрын

The “Work with other frame borders” option is missing for me 12:02 It’s not in the Tool Property and it’s not even on the Sub Tool Detail settings. Does anybody know how I can fix this problem?

@nouramangaka1471 2 жыл бұрын

Hello, Thank you for the video, I don't have a choice of "work with other frame borders" and I have EX version. is there another way?

@ScottD 2 жыл бұрын

Yeah, they changed it to "Keep gutters aligned"

@darbypea2223 3 жыл бұрын

So what do you do if you want your art to kind of pop out of a panel and look more 3d? Is there a way to do that while also keeping the masking that the borders make?

@ScottD 3 жыл бұрын

What I do is, for those areas, I ink on a layer above the panel, and then use a layer in between the border and the inks and white over the panel. Like in this video. kzfaq.info/get/bejne/aL2eo7Fns97cj5c.html If you want to color under this, you could put all the inks and borders into a folder and set that folder to multiply, and then have your colors below that folder, so that white layer won't mess with the colors. Hope that helps!

@Shka_maru 3 жыл бұрын

Great video! Do you know of a way to move a panel above/below other ones without having each panel on a separate layer/folder? I know I can make multiple panels on one folder and the order in which I place them determines what will be overlapped (the most recent one will overlap the previous ones). But maybe I want to go back and place a panel (already made) overlapping another. Only work around I've discovered is to select the panel, cut it, then paste. Just wondering if there was another/easier way. I hope that made sense.

@ScottD 3 жыл бұрын

Thanks! I think the way you described is, unfortunately, the only way to do it without having them on separate layers. I just do separate layers to avoid that. Makes things a little easier for me.

@ghosteyes6128 3 жыл бұрын

hey so i know this was quite a while ago but is there a way to partially erase panels? my comics tend to have eliments that break the borders of the panels and i dont really know how to do that

@ScottD 3 жыл бұрын

You can do this a couple different ways. If you're just inking, you can just have your line art on top of the Panel, and use white under the inks to block out the Panel. That's what I do in this video here: kzfaq.info/get/bejne/aL2eo7Fns97cj5c.html If you are coloring in CSP, too, I would put my Panels in a Folder, then put a Mask on the Folder to block out that part of the Panel. Then color on a Layer below the Folder containing the Panels. Hope that helps!

@mikesarfati2623 5 жыл бұрын

Thanks for the Tut man, verry helpful!! I Have a question though. I'm working in a more free hand kind of page, placing panels hère and there and moving them around . Is there a way to move around a panel with the content fixed in it? for them to be moved or scaled altogether??... Because when I try to move the borders, the inside doesn't follow I hope I make sense and you'll be able to answer. Thanks anyway

@ScottD 5 жыл бұрын

Glad it helped! And yes! If you select the layer with the border, then use the Move Layer tool (the black cursor with the up/down/left/right arrows next to it), it should move everything inside the layer. However, this will move ALL sides of the panel borders, not just one. I don't believe there's a way to move just one side of the border and have the content within move to match.

@mikesarfati2623 5 жыл бұрын

Thank you Scott. I m gonna try all that. And thanks for thé quick response!!

@hessabastian6565 4 жыл бұрын

hey scott, i've been wondering do you know how to save the custom made panel? say that i create a weird looking panel, then i wanna use it again to the other page. Thanks in advance.

@ScottD 4 жыл бұрын

Okay, so custom panels are sort of weird. You basically have to delete everything else but the panel in your file and then go to Edit > Register Material... > Template to make the panel something that can be imported into other documents. Then go to the Materials panel in the file you want to import to, and find your Template that you just made. I wish there was a way to drag and drop panels from one file to another, but for now, this seems like the only way for me to get it to work. Let me know if you find an easier way or have any more questions! :)

@heyitsmorgannerdzlive 4 жыл бұрын

I may have missed the explanation, but how do you open up ALL your pages on the leftside near the tools? And can you set a number to have there?

@ScottD 4 жыл бұрын

Sorry! That's an option in the EX version of the program that's not available in the Pro. You check the "Multiple Pages" box at the bottom, which creates a bunch of Page files all at once, plus another Story file that links them all together. It's sort of a handy feature, but isn't necessary. If you don't have that version, you can just save a Template when making your Page file.

@DonPuglisimusic 3 жыл бұрын

Do you happen to know what the width of the edge of the panel line to the trim line using 11 x 17 BlueLine Art panel boards which will be reduced to standard comic size?

@ScottD 3 жыл бұрын

Check out this link to a template that Nate Piekos has set up for original comic art. I use this to set up dimensions when I want to make an 11x17 page. Good luck! :) blambot.com/pages/original-art-dimensions-for-american-standard-comics