Scrapping A Car For Parts - Tracked Amphibious Vehicle Build Ep. 2

Рет қаралды 1,198,417

5 жыл бұрын

Scrapping our family car for parts for the homemade tracked amphibious all terrain vehicle - the engine threw a rod back in 2016 and now I can use the gearbox / differential, the half axles, brake rotors and calipers, maybe seats and so on for the amphibious vehicle build. Since the car has been sitting for a while now all the parts are even more rusted and hard to take apart than before. I'm also pulling the engine since I'm gonna take it apart and see exactly what went wrong inside even though the reason shows itself through the hole in the engine block. But it will be interesting to see mangled engine parts close-up in detail. The body of this 2001 Peugeot Partner is rotten as you see in the video - the hydraulic car jack wants to go through the bottom.
This video is part of a series of videos, check out the series here: • Tracked Amphibious Veh...
Check out other videos on my channel page: / donndiy
Soundtrack:
Pomade - Silent Partner (KZfaq Audio Library)

Пікірлер: 128

@olddawgdreaming5715 5 жыл бұрын

Hey Donn, sure enjoying the ride along again. Getting to see the wood hauler at work, the new redone shop are to work in and all your fine wrangling of parts and fabrications ahead to complete the amphibious vehicle. Thanks for sharing with us.

@tectalabyss 5 жыл бұрын

I am really looking forward to more on this build. Thank you. Liked,Shared,Added to playlists. both part 1 and 2.All my best

@gaius_enceladus 4 жыл бұрын

New Zealander here - I'm **loving** this series! Looks like you're in a **beautiful** rural part of the country!

@VitorMadeira 5 жыл бұрын

2:20 Great Scott! That oil is crystal clear!

@Vlad-km7mh 5 жыл бұрын

This is very interesting project, you are best, I waiting next series!

@leop9021 4 жыл бұрын

I wish I was doing more projects like this when I was younger! You are doing great. That motor oil looked so clean!

@petemiller519 4 жыл бұрын

Dude, you're an automotive surgeon! Keep up the amazing work. Cheers.

@abc123546879 5 жыл бұрын

Your shop is nice and clean as it should be.

@prancstaman 5 жыл бұрын

The anticipation is building!!! :)

@dannythetoesmasher 5 жыл бұрын

Been waiting for this.....more please.

@kurtscustoms 5 жыл бұрын

Wow that timber trailer comes in handy for more than just carrying logs, very cool!!

@DonnDIY 5 жыл бұрын

Have to use what I have. 😉

@morgansword 5 жыл бұрын

I see a amphibious track machine coming out of this Donn, a excellent cleaning and set up in a much warmer than usual build for you which I hope to see more of. I would also like a tour of the barn that you walled in but I never seen finished. You such a excellent craftsman. So far so good

@ozdatman 5 жыл бұрын

Been waiting for this one.

@teranovski 4 жыл бұрын

god damn slavs allways so crafty. good videos, i'm subscribing.

@weldweld5629 5 жыл бұрын

Can’t wait to see some more

@Crewsy 5 жыл бұрын

Donn DIY. A man with a plan. 👍🏻👍🏻👍🏻

@codyschoonover1988 3 жыл бұрын

Dude I love that swing arm winch powered cherry picker! Now I gotta have one hahaha

@purask 5 жыл бұрын

Oh i waited so long for this to come 😋

@christofix 5 жыл бұрын

I'm looking forwar to the next video! This one reminds me when my motor was broken and i placed a new one myself.

@floatncoffee 4 жыл бұрын

Very cool little trailer

@arnoldbaclig7709 5 жыл бұрын

Your so smart man awesome 👍👍👍

@davidestelter1092 5 жыл бұрын

looks like fun!

@TheDistur 5 жыл бұрын

You're going to get that nice clean workshop all dirty! :P

@AFHProjects 5 жыл бұрын

Happy 200K subscribers milestone! 😜🤘 GRAZY!

@DonnDIY 5 жыл бұрын

Thanks man!

@mercer982 5 жыл бұрын

He's living my dream

@maxwellharmon4172 5 жыл бұрын

this video is awesome!! It would be cool if you made a video on exactly how you go about taking apart rusty shit you found in a field. commonly I try and end up breaking off bolt heads and stripping out threads. you seem to have a precise process of lubricant, heat and wrenching in a way that works. you should make a vid on your process.

@arkansas1336 5 жыл бұрын

Keep everything going in the right direction, maybe go back and get the steering wheel?....lol.. Thanks for the your great video editing efforts!!!!

@2artactical55 5 жыл бұрын

We've been wanting to build one!

@2artactical55 5 жыл бұрын

How are you going to split the drive system coming out of the transmission to allow for independent movement of each drive wheels?

@nikolaynikolaev3599 5 жыл бұрын

New projekt cool!!!

@markhall7646 5 жыл бұрын

@ 8:15 Turbo mode! I do this too when I REALLY want to get something done!

@thorbensartorydiydesign2652 5 жыл бұрын

Sinn diy = legend 👍

@einarttamm4250 5 жыл бұрын

VERY GOOD 5 + !

@00BillieTurf00 5 жыл бұрын

Omg, yes, superstoked! Awesome.

@SteveGeremia 5 жыл бұрын

Cool! very interested how you will go about coupling the transmission to the 20hp v-twin. Specifically the amount of reduction and what type of clutch. V belts and pulleys? Chain Centrifugal clutch? The Stock Clutch and Flywheel? Similar two one of those 212cc predator trucks? I can see the steering being skid steering by having the break calipers on separate controls putting more power to one side or the other of the differential like a tractor or bulldozer. That power steering pump could run a hydraulic cylinder or two. Looking forward to seeing your solution!!

@rehoboth_farm 4 жыл бұрын

I bet he uses the brakes as brakes. Look at where a hummer's brakes are located.

@bborkzilla 5 жыл бұрын

That feeling when the jack goes up, but the car stays put and the rust cascades down.

@lolcec81 2 жыл бұрын

Комментарий в поддержку канала и ролика, а также труда мастера.

@svangvichith 3 жыл бұрын

good job

@geedubb2005 5 жыл бұрын

Almost 200K subs dude! Yep haw!

@greenhat7742 5 жыл бұрын

215K now

@alltractorvideos4255 2 жыл бұрын

HELLO BROTHER I AM INDIAN I LOVE YOUR VIDEO PARFECT

@craigmonteforte1478 5 жыл бұрын

Kind of makes it easy when you know you aren’t reassembling that car back to. Original or safety specs again by just Using bolt. Cutters and whatever to get to that specific part years ago. I bought a used engine from a wrecking yard. And thats how they had taken it out of the vehicle. For me which was fine as i had all the components on my engine i needed to install the replacement one i needed

@abc123546879 5 жыл бұрын

For a back yard mechanic skill is great and adaptive.

@the_darkness_knight12 5 жыл бұрын

Next video sandblaster for removing rust keep up the good work

@Redneckmfg 5 жыл бұрын

Well I too was confused as to where part 1 was... It must have been posted as unlisted ??? Moving on - I am really going to enjoy this build Cause I Love me some track Vehicles... Looking forward to this one for sure....

@DonnDIY 5 жыл бұрын

Hey, part 1 is here: kzfaq.info/get/bejne/b7B9Y7mEy8DXgHU.html

@neirodrigues4159 5 жыл бұрын

viodeo very satisfactory!

@user-pu2ee4oi2d 4 жыл бұрын

Вот это крутой прицеп! Хочу такой же!

@elcreador6675 5 жыл бұрын

Excelente 🇩🇴🇩🇴🇩🇴🇩🇴🌎

@thsachembasangtam9405 4 жыл бұрын

Awesome

@swampratt36 5 жыл бұрын

What's the plan to make it direct drive with it being one wheel peel transaxle ? Just curious ,🤔👍👍

@LhajBELAAIDWorkshop 5 жыл бұрын

Best wishes brother's

@robertmailhos8159 5 жыл бұрын

That's the Best thing to happen to a front drive vehicle make something else out of it 😄😄😄

@michaelteeple8704 5 жыл бұрын

Dam did your cv axle really just slide out. Seems every one I work on needs a slide hammer at least. I did have a Ford that liked to spit them out at will.

@Jonesec1 5 жыл бұрын

Nice going donn will you use a cvt transmission between the engine and transmission. I was thinking about like that using a honda civic transmission and a runsun v twin turbo diesel. But I was thinking it might be a bit heavy combined for an off road buggy. I will be very interested to see how you develop your design further. Thank you for the awesome videos as always and inspiration.

@tctime 5 жыл бұрын

I built something like this one time😁

@patrickkelvin1823 4 жыл бұрын

Belo projeto

@GarnettM 5 жыл бұрын

Just curious why you cut the brake lines can use them for steering maybe you have something better ---- We`ll see .

@aldialvianto1570 5 жыл бұрын

Good...😄😄

@bobdickweed 5 жыл бұрын

200,000 soon ..;-p

@giovannipetitti1588 5 жыл бұрын

Nuovo iscritto 👍

@maxospreys2964 4 жыл бұрын

This guy is smart, he just need some high end good tools.

@user-kt2hb8xr3p 5 жыл бұрын

عمل رائع

@user-vx2pe6sm3o 4 жыл бұрын

Хороший проект.

@janetizzy6741 4 жыл бұрын

I am waiting to see him build a space ship from that pile of barn metal (about 8:0).

@markusnurmi1720 5 жыл бұрын

Next episode, please.

@habibafarin1645 4 жыл бұрын

maffig👍👌

@NeoHack 5 жыл бұрын

Part 3 out yet ?

@xalizcoguanatos8195 5 жыл бұрын

Is it finish ?

@nick_mechanic2228 4 жыл бұрын

Um i dont think that these parts are cleaned that much and for your budget will be better if you clean them in diesel or gasoline than spraying them with Wd or whatever it is. But still giving thumbs up and pretty much enjoy your videos. They are so interesting for me and sometimes learn my self alot. Continue and wish you good luck.

@Mercedes-Benz568 5 жыл бұрын

У нас бы на такой машине ёжики арбузы возили

@tomharrell1954 4 жыл бұрын

YOU NEED A SAND BLASTER!!!! DO A VIDEO ON MAKING A SANDBLASTER THEY CLEAN UP PARTS SO MUCH FASTER AND MORE EFFECTIVELY MEDIA CAN BE USED INSTEAD OF SAND SO THE PARTS ARE NOT DAMAGED

@setatampio9016 5 жыл бұрын

I like your accent.

@rickt151 5 жыл бұрын

Nice work, do you know Mastermilo? It's a Dutch guy who also does this kind of work. I also do recommend that you watch the "werkplaatsvlog" (workshopvlog) channel, it's his secundary channel which goes in more depth.

@Shantobe2012 5 жыл бұрын

Одно понял- это эстонский мародер!

@vyacheslavm6117 4 жыл бұрын

..ннннн

@vyacheslavm6117 4 жыл бұрын

Новости

@maximst-germain7580 5 жыл бұрын

Do you still have your fisrt amphibious all terrain vehicle , your Argo ?

@DonnDIY 5 жыл бұрын

No, it wasn't mine, we borrowed it and had it only for a couple of weeks maybe. But this ARGO was the catalyst for this project for sure. 🤘

@asssdsky7318 4 жыл бұрын

waht is your nationlry

@schmidtm1983 4 жыл бұрын

And where is part 1 bro?, cant find it.

@EZoutAtSecond 4 жыл бұрын

it's there bro...I just finished watching and now two...

@Guust_Flater 5 жыл бұрын

Where is PART 1 ? ☺

@DonnDIY 5 жыл бұрын

Here you go: kzfaq.info/get/bejne/b7B9Y7mEy8DXgHU.html

@VitorMadeira 5 жыл бұрын

@@DonnDIY you should add that video URL in the description field of this one. ;)

@dozer1642 5 жыл бұрын

It’s at the beginning

@VitorMadeira 5 жыл бұрын

@@dozer1642 sorry, but it is not. The video description is not the comment section.

@prevost8686 5 жыл бұрын

Obviously a lot of road salt is used there.

@DonnDIY 5 жыл бұрын

You have no idea. Maintaining a car here is PIA.

@sawmillmodsdotcom2879 5 жыл бұрын

have you figured out how long your tracks are going to be yet

@DonnDIY 5 жыл бұрын

I'm planning on using 8 car wheels - four on each side, the length of the track will be dictated by that.

@andriparindwi3802 5 жыл бұрын

Oke sip diy

@dualsportrider3221 5 жыл бұрын

Trans bell housing looks broken?

@DonnDIY 5 жыл бұрын

Yup, the conrod broke in half and bashed up the engine block including starter motor and transmission bell housing. But I'm gonna cut it off anyway.

@mximusprime2105 5 жыл бұрын

Oil super)

@malcolmporter4771 5 жыл бұрын

Ain't that the van you put all that money in the front end with new bushings, bearings n disk brake system?

@DonnDIY 5 жыл бұрын

Nope, that is 1.6 petrol I repaired and it is still running. This one I dismantled is/was a 1.9 diesel.

@malcolmporter4771 5 жыл бұрын

@@DonnDIY which would you rather have? Diesel or Petrol?

@DonnDIY 5 жыл бұрын

Diesel had more torque, better to tow things. Petrol is better for everyday driving. So both. 😀

@sawmillmodsdotcom2879 5 жыл бұрын

so you are building an argos style tracked machine?

@DonnDIY 5 жыл бұрын

As far as 8 wheels and tracks go - yes. But I'm gonna build it without the high maintenance chain drive system Argos have.

@sawmillmodsdotcom2879 5 жыл бұрын

@@DonnDIY my friend built one like that and kept breaking axles cuzz the axles didnt float they were to ridgid

@MFKR696 5 жыл бұрын

You probably couldn't have found a worse donor transmission than the one you stripped out of that car.

@user-zr7rc1te5q 5 жыл бұрын

Круто !!! А что это будет ?

@DonnDIY 5 жыл бұрын

Гусеничный вездеход-амфибия.

@user-yn8op8tb8n 4 жыл бұрын

Хороший канал вы откуда?

@ahmetyldrm1112 5 жыл бұрын

Arabanın kasası diri duruyot gönderde bizim kayınoederin motorunu ona taşıyalım bizimde kasa dökük))

@die3e1 5 жыл бұрын

А тормозной шланг открутить религия не позволила?

@user-gp4hl3zk7e 5 жыл бұрын

потом будет продават как новый запчасти намже))))))))))))))))))))))

@greenhat7742 5 жыл бұрын

Looks like Jason Bourne retired from CIA and work on the farm :)))

@SlavyanMir 4 жыл бұрын

А где первый эпизод об этом вездеходе?

@DonnDIY 4 жыл бұрын

kzfaq.info/get/bejne/b7B9Y7mEy8DXgHU.html

@SlavyanMir 4 жыл бұрын

@@DonnDIY thanks))

@johnstoddart5488 5 жыл бұрын

@user-wd2ul6wl8s 4 жыл бұрын

и на продажу!

@makanwalo5489 5 жыл бұрын

You are génois

@madeinbelgium8552 5 жыл бұрын

why don't you use that car engine for it?

@DonnDIY 5 жыл бұрын

It blew a rod. That's why the car got shelved.

@TheBibliofilus 5 жыл бұрын

Typical French car, usually a nightmare to work on and if it gets wet it crumbles to rust mush.I guess the timing belt snapped and the engine went crazy and selfdestucted, happened several times to me prematurely on French cars...

@DonnDIY 5 жыл бұрын

You can see in the video me taking off a perfectly good timing belt. The connecting rod broke, that was the problem.