Our website: www.apple-presses.com
Screw press VP-3
The best helper in your kitchen.
Basket capacity: 3 liters
Basket height: 160 mm
Basket diameter: 155 mm
Weight: 7 kg
Dimensions: 24x30x27 cm
This model of the press is ideal for juice extraction from various berries. It is also good for experimenting with different combinations of fruit and berries, e.g. you can prepare liter jar of apple-pear juice, a jar of apple-pumpkin juice, apple-carrot juice, apple-cherry juice, apple-rowanberry juice. The press is quite small and can be freely used in a normal kitchen. The apples can be crushed with the help of a conventional or an electric grater. Berries should be pounded with a wooden masher or minced before juice squeezing. The press is useful in the preparation of your own cheeses and pressing extra juice cooking potato pancakes or zeppelins.
Durable construction.
The working screw has a trapezoidal thread. Such pair of screw and nut keeps the load well and will last a long time.
Oak basket.
The basket is made of oak, everything is fixed by the stainless steel screws. In one cycle of pressing can be squeezed 1,5 -1,7 liters of juice.
The drain pan and the piston are made of stainless steel.
The rings of the basket, the piston and the drain pan for juice are made of stainless steel.
Practical construction.
Powder coating of the frame provides a strong and durable protective covering. At the bottom of the press’s base there are rubber legs necessary for stable fixation on the table and for protection of the frame’s covering. While squeezing the juice it is enough to hold the frame with one hand and to rotate the screw with another.
A piece of fabric for filtration is attached.
For juice filtration is used special synthetic fabric (lavsan), which is designed for milk and juice filtration. Such fabric is very durable and will last a long time.