Thank you Jack, hope the video is useful. Hope you enjoy a happy and healthy Christmas and New Year, all the best from us all here at The Lovespoon Workshop. 👍👍🎄🎄🎅🎅
@welsh4life3 жыл бұрын
Well done! Thank you for sharing your skills. Great tips
@DailovespoonsThomas3 жыл бұрын
Thanks Donn, hopefully it will be useful to anyone who is learning to use a scroll saw and maybe a few ideas that more experienced users haven't thought of either. Hope all is well with you and your family. Hope you enjoy a happy and healthy Christmas and New Year. Thank you again for supporting our KZfaq channel. All the best from us all here at The Lovespoon Workshop. 👍👍🎄🎄
@charlesmurray3585 Жыл бұрын
Very informative and revealing there is much more to the process than I first thought. I would like to see a chart that reveals the best size of blade for most of the materials I may encounter. Also there is the subject of burning, cause and prevention. Thank you, Charles
@DailovespoonsThomas Жыл бұрын
Hi Charles, great to hear from you. Delighted to hear that the video was useful. Blades are always a massive area of interest when it comes to working with the scroll saw. It is also a bit subjective too. We have done a number of videos where we have trialed different blades and shared our thoughts on them. I work with seasoned hardwood and my preference is the Niqua speed number 9 reverse tooth blade. I have a few different videos that explain the numbers system when it comes to blades and the different T.P.I. etc. Thanks again for supporting our KZfaq channel. Let me know if you have any questions, all the very best from us all. 👍👍
@johnsanchez1619 Жыл бұрын
Thank you for these great tips! Well done.
@DailovespoonsThomas Жыл бұрын
You're welcome John, glad the video was useful. Thanks for supporting our KZfaq channel. All the very best from us all. 👍
@pamelagray76152 жыл бұрын
I just recently got a new scroll saw. I do wood burning signs and thought a scroll saw would be great to add to my projects. Thanks for the tips in your videos
@DailovespoonsThomas2 жыл бұрын
Hi Pamela, great to hear from you. A scroll saw sounds like the perfect addition for type of work you are doing. Delighted to hear that the tips are useful. Thanks for the positive feedback and supporting our KZfaq channel. All the best from us all here at The Lovespoon Workshop. 👍👍
@clivemilner2 жыл бұрын
Wood burning is a perfect combination 👌. You can add facial expressions, cut down on carving. Texture feathers, fur etc. Just burn a piece of wood on 1 side. Flip it over to the bare side no message! Show a friend the other side and wood burn will make their day.
@clivemilner2 жыл бұрын
For big signs spiral blades are fine. Your can cut in any direction. A cheap shoulder iron burner maybe the way to go. Even a blow torch can be good. You brown the wood , then sand. It looks antique.
@colinatchison1723 Жыл бұрын
Very informative helped me a lot
@DailovespoonsThomas Жыл бұрын
Hi Colin, delighted to hear the video was useful. Thanks for supporting our KZfaq channel, all the very best from us all. 👍
@MaddMaxxWoodWorks7 ай бұрын
Thank you
@jessicaweaver6728 Жыл бұрын
Great scroll saw
@DailovespoonsThomas Жыл бұрын
It's served us very well over the past 25+years. Thanks for supporting our KZfaq channel, all the very best from us all. 👍
@matiastapia9314 Жыл бұрын
que hermosos trabajos, sinceramente inspirador.
@DailovespoonsThomas Жыл бұрын
Gracias Matias. 👍
@user-ot8xd1hj9w5 ай бұрын
Lovely video ...I'm wanting to buy a scroll saw what would you recommend it must have on it example pedal or do all scroll saws take the same blades or do some not take just don't want to go and spend without not understanding thank you
@DailovespoonsThomas5 ай бұрын
I would definitely go for a scroll saw that takes pinless bladed. My scroll saw of choice is the Hegner Multicut 2s and my blade of choice is a number 9 reverse tooth blade, either a Niqua Speed, Niqua Pebecco, Pegas or flying Dutchman.
@user-vd2go6uy7u9 ай бұрын
Could you please tell me where you ordered your face mask at? I really like the design of it, the way the face shield is upward, not down like most. I have been looking for one like you are wearing but haven't found anything like it. Thank you!
@DailovespoonsThomas9 ай бұрын
The mask used in this video has been discontinued. It was a Trend mask but they stopped making them. I have attached a link below to the mask I am currently using. You need to buy the filters for it separately. www.safetecdirect.co.uk/products/force10/jsp-force-10-typhoon-full-face-mask-without-filters-various-sizes-available?sku=bpb003-004-000&gclid=CjwKCAjw8ZKmBhArEiwAspcJ7tSEL8H3h5eFY2FrMGBk4u6b66J608dD3b865-KkGFUHPCmpmaLmdhoCxV0QAvD_BwE Thanks again for supporting our KZfaq channel. All the very best from us all. 👍
@clivemilner2 жыл бұрын
Half inch is 1.25 cm. Just for new followers. Nice videos as usual 👌
@DailovespoonsThomas2 жыл бұрын
Hi Clive, Great to hear from you. Delighted to hear that you enjoyed the video. Thank you again for supporting our KZfaq channel. All the best from us all here at The Lovespoon Workshop. 👍👍
@gamernick1533 Жыл бұрын
I didn't realise Joe Lycett was into scroll saws :P
@RouxRouxRingo2 жыл бұрын
How do I know if the blade is too tight or too loose? Is it just something you have to learn to feel or is there some sort of guide to make sure it's done correctly? I just bought a new scroll saw and just opened it up, turned it on and tried to feed some material into the blade, it didn't go as well as I'd hoped. I instantly looked up common mistakes and one of your videos was first in line. This is the third video I've watched of yours and I'm already more confident and have fixed a few minor issues I was having. Thanks for the content. New subscriber for sure.
@DailovespoonsThomas2 жыл бұрын
Hi, great to hear from you and delighted to hear that the videos are proving useful. Blade tension can vary between different scroll saws but each system should have its own method of adjusting tension on the blade. As a starting point I would suggest installing the blade and adjusting the tension until the blade comes to the top of the blade holder. I find that is the optimal position on my Hegner Multicut 2s. However, if you want to find out if it is the same on your machine you can make small tension adjustments and decide if you feel it improves the cut or if too many blades are breaking. Hope that all make sense. The scroll saw is fantastic machine to work with, so I hope you enjoy making lots of different projects. Let us know if you have any follow up questions or whenever you have any issues. Thanks for supporting our KZfaq channel, all the best from us all here at The Lovespoon Workshop. 👍👍
@clivemilner2 жыл бұрын
Fit the blade as normal. Ping it like you would a guitar 🎸. You will soon get the right tension. Enjoy your scrolling.
@clivemilner2 жыл бұрын
Just practice scrolling and enjoy. Simple scrollsaw projects are much appreciated by family and kids.
@leeloxleigh14713 жыл бұрын
Hi, loved the video. I have been scroll sawing for about three months now. Started off using a Titan, but upgraded to a Sips industrial. Although I love scroll sawing (self taught), your tips will help me to improve. Can you do a video on cutting out text, as I for some reason seem to find this difficult. More videos please, as I am subscribing to your channel.
@DailovespoonsThomas3 жыл бұрын
Hi, great to hear from you and thank you for supporting our KZfaq channel. Will definitely have a look at a video on cutting out text for you over the coming months. Thanks for the great idea. We used to do a lot of house signs and plaques so it would be great to revisit some of the methods we used. Thanks again for the fantastic suggestion. Hope you enjoy a happy and healthy Christmas and New Year. All the best from us all here at The Lovespoon Workshop. 👍👍
@DailovespoonsThomas3 жыл бұрын
Hi, just to let you know that I am doing a livestream for you later on a method to cut out text on a scroll saw. Will be doing another video soon on different methods for cutting out text on a scroll saw too. All the best from us all here at The Lovespoon Workshop. 👍👍
@DailovespoonsThomas3 жыл бұрын
Hi, just to let you know that I am doing a livestream for you later on a method to cut out text on a scroll saw. Will be doing another video soon on different methods for cutting out text on a scroll saw too. All the best from us all here at The Lovespoon Workshop. 👍👍
@christopherclark95063 жыл бұрын
Love the beginner video. Love the lamp. Does it have a brand name.
@DailovespoonsThomas3 жыл бұрын
Hi Christopher, great to hear from you and delighted to hear that you enjoyed the video. Not sure which lamp you saw in the video but knowing us it will be recycled from another lamp, like a table lamp and given another purpose. Great to hear from you and thank you for the positive feedback. All the best from us all here at The Lovespoon Workshop. 👍👍
@woodworks35852 жыл бұрын
Hi. I just found your channel. Love your work Dai . Very impressive . I make scroll saw patterns and give them away for free to the scrolling community for free as long as they don't sell the patterns. I have done some love spoon patterns. Great KZfaq content here
@DailovespoonsThomas2 жыл бұрын
Hi, great to hear from you. Thank you for the positive feedback on our KZfaq channel. Hopefully it is useful in encouraging everyone to get involved with working with wood. Great idea with doing the scroll saw templates, such a lovely machine to work with, so many things you can make with it. It is definitely the machine that gets the most use here at our family workshop and behind the handcarving it is where we spend many a happy hour working. Thanks again for getting in touch and supporting our KZfaq channel. All the best from us all here at The Lovespoon Workshop. 👍👍
@bengalbhoy3 жыл бұрын
Excellent video for the likes of me the novice scrollsawer. Started 6 months ago and use it every day now as it's addictive. I have an Axminster AT460 which is very similar to your Hegnar machine. I like the idea of the wheel to release and tighten the blade clamp as opposed to the Allen key method. Do you know if this part would fit my machine? I emailed Axminster re the blade clamps splitting at the top ( have broken 8 so far )but no reply so far.Any ideas what may be causing this? Any help would be much appreciated.
@DailovespoonsThomas3 жыл бұрын
Hi Patrick, Thank you for the positive feedback on the video. I have had a look at your scroll saw and the top blade holder looks very similar to the Hegner. If it is the same then the quick release clamp would be a worthwhile investment to make if you are using the scroll saw every day. I am actually doing a video specifically about the quick release clamp in the coming months. It's a really useful addition if you are doing alot of pierce work and it fits your machine. Only a thought but you could purchase one and if it doesn't fit your machine return it to the seller or resell it yourself. Would definitely pursue Axminster because this might make a difference to your scroll sawing. Additionally, that seems like alot of blade clamps breaking, they should last better than that. Our quick release clamp is in daily use and has lasted for years. Hope that helps, thanks for supporting our KZfaq channel. All the best from us all here at The Lovespoon Workshop. 👍👍
@bengalbhoy3 жыл бұрын
@@DailovespoonsThomas Thanks for your prompt response and I will take your advice and try to source a quick release clamp. Also look forward to the upcoming video on this. I have been experimenting with the amount of tension that I put on the screw on top to the clamp to see if this reduces the amount of breakages.Have you made a video of 3D scrolling with oak? It is hard work on me and the blades..
@DailovespoonsThomas3 жыл бұрын
Hi Patrick, thanks for getting back to me. Hopefully the information will prove useful. It sounds like you are making great progress and it's great to hear that you are enjoying it too. Experimenting with different tension is a great idea, find what works best for your and your scroll saw. Axminster might have some information on the best amount of tension etc so I would keep trying to contact them. Haven't done any videos focusing on 3d scroll sawing in Oak. The arms and shoulders must be burning on projects like those. Thanks again for getting in touch and supporting our KZfaq channel. All the best from us all here at The Lovespoon Workshop. 👍👍
@daveparker50553 жыл бұрын
Just started scroll sawing this is a good intro thank you. iam a bit confused with the different speed settings any advice appreciated
@DailovespoonsThomas3 жыл бұрын
Hi Dave, thank you for getting in touch. We are not the best ones for giving advice on variable speed because we have never owned or used a variable speed scroll saw. Our Hegner multicut 2s is single speed so you turn it on and away you go. A few thoughts on this though, a faster speed should give a clean cut and a slower speed should be slightly easier to control. I would try to get the feed speed as fast as possible whilst still maintaining control. Far easier for those of us who use a single speed scroll saw, don't have to think about these things! It runs at 1440spm all the time, the same as the maximum speed of the variable speed machines. So basically all of our scroll saw work on a variable speed machine would be done on the maximum speed. Hope that helps, sorry we can't give you more specific insight. Thanks for getting in touch. All the best from us all here at The Lovespoon Workshop. 👍👍
@daveparker50553 жыл бұрын
@@DailovespoonsThomas thank you for this, it has helped I will crank the speed up and see how it goes All the best to you all👍
@DailovespoonsThomas3 жыл бұрын
@@daveparker5055 You're welcome Dave, let me know if you want any information on blades etc. Thank you for getting in touch, all the best from us all here at The Lovespoon Workshop. 👍👍
@markcoleman3752 Жыл бұрын
What's the easiest way to sand your part after you scroll saw it. Inside edges
@DailovespoonsThomas Жыл бұрын
Hi Mark, great to hear from you. There are a few different answers to this one. Firstly, we get a fine finish working with a Niqua speed number 9 reverse tooth blade on hardwood that often requires mini or no furt finishing at all. Secondly, if we have any burn marks after scroll sawing these can be removed with a chisel or gouge. Thirdly, you can use files and sand/glass paper to refine the finish. Finally, you can use an oscillating Sander to refine the internal finish you get. For ourselves we would prioritise geyt a great finish during the orig cut to save time and effort. Hope that helps, thanks for getting in touch and supporting our KZfaq channel. All the best from us all here at The Lovespoon Workshop. 👍👍
@JamesJuly-js7sd5 ай бұрын
What. Scroll saw do you recommend for beginners
@DailovespoonsThomas5 ай бұрын
Hi James, great to hear from you. My scroll saw of choice is the Hegner Multicut 2s and my blade of choice is the Niqua Speed number 9 reverse tooth blade or the Niqua Pebecco number 9 reverse tooth blade. Thanks again for getting in touch and supporting our KZfaq channel. All the very best from us all. 👍
@davidgreenwood52413 ай бұрын
I’ve started doing scroll sawing the machine I have just bought is Axminster obviously there’s no point in me spending a lot of money just for a hobby the problem I find with it is it’s difficult to remove the wood from the blade your machine is obviously pivoted so you can lift it up to remove the work in hand
@DailovespoonsThomas3 ай бұрын
On the Hegner you just released the blade and pick the piece up that you are working on. Simple and it does the job. It helps if you are using pinless blades too.
@davidgreenwood52413 ай бұрын
@@DailovespoonsThomas yes I think I’m a bit worried of breaking the blade by bending it but I see you do that anyway it’s just a matter of getting a bit more confident and practice
@DailovespoonsThomas3 ай бұрын
@davidgreenwood5241 if it's a good blade it will be fine. I use the Niqua Speed or Niqua Pebecco number 9 reverse tooth blade. It does a great job working in hard wood. Pegas do their own version too. Give yourself time. As you said its a matter of building up your confidence. Enjoy the process, it's a lovely machine to work with and you can use it to make so many different things. 👍
@davidgreenwood52413 ай бұрын
@@DailovespoonsThomas thank you for your reply I’ve only recently found your website I will be looking up more of it in the future I’m sure I can learn a great deal from it
@prestonian10663 жыл бұрын
It may be a silly question but ....would it not make more sense for the dust to be sucked up rather than blown about,thus eliminating the need to wear a mask and less cleaning up?
@DailovespoonsThomas3 жыл бұрын
Hi Ian, the reason that scroll saws have a blower on them is to blow the dust away from the line as you are cutting. This allows you to see the line that you are cutting out otherwise you are basically cutting without the ability to see where you are going. You can indeed add a dust extractor to a scroll saw to reduce dust but this does not deal with the issue of being able to see where you are cutting. I would still recommend using a dust mask and eye protection even if using a dust extractor. Our newer model has a modified blower that blows dust to the side more. Hope this gives you an idea of why the scroll saw needs to be designed like this. Thanks again, all the best from us all here at The Lovespoon Workshop. 👍👍
@leann59293 ай бұрын
BUT how do you get the correct tension???
@DailovespoonsThomas3 ай бұрын
Adjust the tension rod so the blade comes to the top of the blade holder.
@cristaldavid2603 жыл бұрын
Hi, I have a problem with the wood jumping but it's not from a vibration. But I don't know what it's from really
@DailovespoonsThomas3 жыл бұрын
Hi Cristal, great to hear from you. It could be a few different things. What blade are using? I use a Niqua number 9 reverse tooth blade, it does occasionally jump but it's not too bad. Also what scroll saw are you using? The blade and scroll saw are the first things to look at. The size of your projects might be another area to consider. Thick wood could be one cause, I use wood that is between 1/2" and 1" thick. Thicker wood can jump more. If you are working on very small projects like jewellery this can be difficult to keep a good grip on and again cause the wood to jump. Technique can be another area to consider. I hold the wood down with one hand and guide it with the other. Are you feeding the wood to quickly? You need to let the saw do the work, if you force the wood through the saw it can make the wood jump. If you can't find a solution from all of the above it might be worth buying a scroll saw arm. I use a hegner multicut 2s and they sell an accessory arm that holds the wood down for you. My brother has a similar issue to yourself and we bought the arm for him and helps him massively when using the scroll saw. His issue is he feeds the wood slightly too quickly through the saw because he is used to using a band saw. By using the attachment arm it clamps the wood down. Preventing it from jumping. Hope some of those ideas help you sort out any issues you have. Happy scroll sawing. Great to hear from you, all the best from us all here at The Lovespoon Workshop. 👍👍
@DailovespoonsThomas3 жыл бұрын
I think this would make a useful / interesting video for alot of scroll sawyers. Do you think I should make a video with some of the above ideas??
@kingrajagoor9126 ай бұрын
How much is this
@johnholman39782 жыл бұрын
Thank you for your tips. Is the video playback speed normal or have you sped it up some? I am a beginner and my cutting speed is quite a bit slower.
@DailovespoonsThomas2 жыл бұрын
Hi John, Great to hear from you, hope the video was useful. The footage is indeed sped up. It would be great to cut at that speed but the process takes us a little longer than demonstrated in the video playback. We speed up our videos so you can see the projects taking shape in a matter of minutes as opposed to the hours that are often required to make items. Thank you again for getting in touch and supporting our KZfaq channel. Let me know if you have any questions about the scroll saw techniques or equipment etc that we use. All the best from us all here at The Lovespoon Workshop. 👍👍
@MichaelJones-rz5sw2 жыл бұрын
Will scroll saws cut MFD wood fine? I want to make cuts for a cosplay project.
@leelindawork90042 жыл бұрын
I cut MDF all of the time. A lot of name sign makers will cut their letters out of MDF.
@DailovespoonsThomas2 жыл бұрын
Hi Michael, the scroll saw will indeed cut materials like mdf. You will probably need a blade that has more teeth per inch than the one we use so the feed speed is not to fast. Once you have the appropriate blade you will be able to cut MDF without too much trouble. Thank you for getting in touch and supporting our KZfaq channel. All the best from us all here at The Lovespoon Workshop. 👍👍
@DailovespoonsThomas2 жыл бұрын
Hi, great to hear from you. We don't use MDF ourselves as we only usually work in hardwood. Any thoughts for Michael in regards to the best blade for cutting MDF. The Niqua speed we use has a fast feed speed and low number of teeth per inch, so not really suitable for cutting hardwood. Any thoughts might help Michael and others out with this. Thank you for your thoughts and supporting our KZfaq channel. All the best from us all here at The Lovespoon Workshop.
@MichaelJones-rz5sw2 жыл бұрын
@@DailovespoonsThomas Thanks a bunch.
@DailovespoonsThomas2 жыл бұрын
@@MichaelJones-rz5sw you're welcome, thanks again for supporting our KZfaq channel. All the best from us all here at The Lovespoon Workshop. 👍👍
@chriscapo822 жыл бұрын
What is the best way to practice and develop needed skills
@DailovespoonsThomas2 жыл бұрын
Practice the skill, make mistakes and learn from the mistakes you have made. The reason we started a KZfaq channel was to share the things we have learnt in our family workshop over the years and most of the skills we have developed are from doing everything wrong before getting things right. Every day we learn something new and improve on our skills and most importantly enjoy what you are doing. Let me know if you have any questions about specific aspects of scroll sawing. Always happy to help if we can. Thank you for supporting our KZfaq channel. All the best from us all here at The Lovespoon Workshop. 👍👍
@DailovespoonsThomas2 жыл бұрын
Additionally, start with easy projects, for example cutting out key rings. Circle shapes, oval shapes, heart shapes and once you are confident with those progress onto projects that include pierce work (internal cuts) Learn about doing your own designs and getting them to work on a scroll saw. Make the projects progressively more complex. Try stack cutting, intarsia, develop your own style, try different woods. The options are endless. Hope you enjoy working with the scroll saw. All the best from us all. 👍👍
@jeanettejordan47812 жыл бұрын
Are all scroll Machines the same or they are smiling to creations of wood. ??
@DailovespoonsThomas2 жыл бұрын
Hi Jeanette, Great to hear from you. There are lots of different types of scroll saw and a massive variety in quality and price. When we first started using a scroll saw we got started with entry level machines, the same as most people when they get started. We soon realised that this wasn't going to be suitable for the daily use that our scroll saw gets and looked for a better solution. We settled on the Hegner multicut 2s and twenty plus years later it continues to do a fantastic job for us. It largely comes down to budget and quality you need. Entry level machines can be great if you are getting started or only occasionally using your machine but there are certainly better quality scroll saws available. Thanks again for getting in touch. All the best from us all here at The Lovespoon Workshop. 👍👍
@james8583 Жыл бұрын
Didn't finish watching yet, will go back. But already for a person (usually in their 50s, 60s, 70s plus) screw this it this then to this and then buy a 600 dollar machine to cut a 2 dollar piece of wood, not happening. Most want to open the box put it together and work otherwise it is work and we are not being paid, thus it isn't a hobby, but a job and I will bet without things like KZfaq most wouldn't go near a scroll saw or even heard of one. He already lost me with all this bolting, not happening for a small machine, overkill. Rather work an extra day a month and buy the piece, put it in a room and let it collect dust there then sell it again. Not what having a hobby is all about. God Bless brothers and sisters.
@DailovespoonsThomas Жыл бұрын
Hi James, great to hear from you. Hope you enjoy working with the scroll saw. Thanks for supporting our KZfaq channel, all the best from us all here at The Lovespoon Workshop. 👍👍
@mdnajmulhosaaen39322 жыл бұрын
দাম কত ভাই
@jowettcars2 жыл бұрын
I really don't think I could do anything with that dust mask on
@DailovespoonsThomas2 жыл бұрын
Hi, great to hear from you. Lots of different options when it comes to dust masks. Find the one that suits you best. Thanks for getting in touch, all the best from us all here at The Lovespoon Workshop. 👍👍