You are a very cool guy , I like how ou speak, you speak slow and clear and I like this style of videos not many people speak and make videos like yours video. I appreciate your time you spend to teach us. I will put your video in my list with the favorite videos in youtube.
@scullcomhobbyelectronics17026 жыл бұрын
Hi Panayiotis, Thanks for your nice comment. Regards, Louis
@sargesilva61654 жыл бұрын
@@scullcomhobbyelectronics1702 agree ..thanks
@ReadyUpGo Жыл бұрын
Finally! Someone who explains the basics of charging a battery with this unit so that even the most rank beginner (me) can understand it. Thank you so much. ! Best Regards.
@CarminesRCTipsandTricks6 жыл бұрын
I must say, that is a quite compleat explanation!! You are certainly more advanced in electronics knowledge than I am. The Calibration information is extremely useful as well. If you're still responding to this old Video, I could really use some help!! I just got a "fake" B6AC... I charged a 7.2V NiMH Battery perfectly. However the second time I used it was on a Lipo, my very first. (And I've been in the Hobby for over 37 years) I plugged the unit in, and connected my 2S Lipo Batry. I fumbled through the Menus, but couldn't get it started... I then unplugged and replugged it in. Now all I'm getting on the Display is 0.00v 0.00v, 0.00v 0.00v, 0.00v, 0.00v The Buttons do NOTHING. Turning it off and on, leads to the SAME Display and no working buttons! Did I do something?? Is there anything I can do to mend this? I hope you can help me.
@dieselrotor8 жыл бұрын
Thank You for posting this. I bought a knock off and found the rate/voltage off from a known battery. I did not know I was able to calibrate (Had not read the instructions if it even states it in them) the unit. Knowing this I will now pull it from the box and begin using it too. Again, thank You.
@guacamoleman872 ай бұрын
I've been using a fake for years!!! Thanks for showing me how to calibrate it
@joyesmith442 жыл бұрын
*This battery reconditioning program exceeded my presumptions. It worked on any drill battery, several AA and AAA batteries, **batery.repair** and any camera battery. The steps are simple and the act itself is exciting to do. No matter what type of battery you`ve got, it is sure to function again!*
@fun_ghoul6 жыл бұрын
8:25 I don't even own a balance charger (yet), but appreciate that you don't just leave people who have knockoffs to twist in the wind. I'm sure many knew the risks, but couldn't afford a hundred bucks for a better unit (I'm especially thinking of those using e-bikes/scooters/boards/whatever as primary transportation) or received as a gift from someone who didn't see your vid! You're a gem.
@fun_ghoul6 жыл бұрын
I'm not rushing to try this out by any means, but out of curiosity, do you think a knockoff like this one would benefit from the addition of a larger power supply, 2% tolerance resistors for current sensing and input supply fuse? The PSUs in both units seem to be repurposed laptop bricks, so...maybe upgrade the wee one to a 90W or 120W? In the same vein, should people just treat (unmodified) knockoff units as downrated and only use them at 2/3 or so of max amps? Cheers.
@scullcomhobbyelectronics17026 жыл бұрын
Thanks for the comment.
@AstroBananna8 жыл бұрын
Best review of anything I've ever seen on the tube. Thanks
@scullcomhobbyelectronics17028 жыл бұрын
Thank you.
@rogergibbs29377 жыл бұрын
definitely the best run through i have ever seen, slow, precise and informative and have subscribed
@wishmun7 жыл бұрын
Agree! :-D
@KL3NCH6 жыл бұрын
First rate video. Subscribed.
@davidferguson84784 жыл бұрын
Does this automatically stop charging batteries or do you have to this in the settings ?
@dinos-sphere5 жыл бұрын
Thank you! Very informative! Well explained and simple so anyone can understand. I’m glad I got the original...
@cedrikkaurit30784 жыл бұрын
Great comparison, very informative. I cannot however get the calibration button combo to work. My fake charger is one without the built in power supply, perhaps it does not have a calibration option. I did notice a misreading of the voltage and would like to calibrate it. I'm also wondering if it is worth upgrading some features to like of the genuine model, e.g swap to thicker cables, increase air flow vents size and other similar features, or leave it as is?
@christianwehrenfennig43682 жыл бұрын
Nice video. Thanks. Came across it troubleshooting my charger which shows discrepancies between (a) current reading and the corresponding rate of increase of the capacity reading and (b) current reading on the charger and on my multimeter by a factor of 2 (!). This is when using a discharge program. Initially, I hadn't even considered that the unit could be fake, because I didn't realise how common this was. But having seen this video and others on the same topic, it was instantly clear. I then opened the unit up and couldn't believe my eyes when I saw that the case of the AC adaptor was cut open to be able to get the wires out. All in all, the thing mostly works for charging and balancing, but the large discrepancy on the current reading makes me a bit uneasy about the safety of the thing...
@burhandarwish92474 жыл бұрын
I 2nd that. Good on you mate , at last somebody covers what you really want to know. Straight to the point knowledge without all the crap. Thank you
@Albanus358 жыл бұрын
Thanks! That really helped me to choose before buy it. I'm buying a V2 version which is an genuine SkyRC one!
@scullcomhobbyelectronics17028 жыл бұрын
+Albanus35 Glad it was of some help.
@prckata8 жыл бұрын
+Albanus35 give link for buying
@saddamhossainnasim76053 жыл бұрын
Modern youtube reviewers should learn from you how you review a product with such details and information Great job, Sir.
@DJBBBOSS8 жыл бұрын
thank you for such a well explained video. Very clear indeed. I didn't even realise that these chargers are a copy/fake of the real brand and now you have explained the errors with the copy version I have decided to spend some extra money and buy the real branded version. The copy/fake/clone what ever you like to call it defeats the whole reason for spending out on a professional charger and no longer using the cheap chargers that come with these rc models.... Even though the branded one costs almost twice the price I would sooner pay out and know the build and safety is far better..... Thanks again, Regards Steve
@Asvybre4 жыл бұрын
Great video! Incredible differences that sure make a difference. One thing I would change is the 18650 you're using for calibration, that one is fake since 18650 can only go to 3600mah due to chemestry and material constraints. I would you a well know name brand and quality cell.
@Smedleydog19 жыл бұрын
I would imagine the white stuff you call heat sink sealant is probably just paste to keep the smaller power supply from sliding. I took my fake charger apart and it had the larger power supply and no paste on it. (I didn't check the resistors you pointed out) This was a good video to watch. Evidently the clones (fakes) vary on components used to build them, so if you buy one, it is probably a good idea to test it before turning it loose on your batteries.
@tnxmatze9 жыл бұрын
i want to mention that there are different versions of the fake out there. is far as i can see you have version 08 as you can read at the pcb. i have a version 1.50 with atmel chip and larger power supply that fills out the space, but there are also version 2.0 with nuvoton chips out there. mine works well after calibration but actually i trying the cheali charger fimware.
@bds69208 жыл бұрын
thanks-bought the cheap b6-it did not last more than three charges and started acting up-have an original b6ac on the way-ur vid taught us a lot-thanks
@scullcomhobbyelectronics17028 жыл бұрын
+BDS Glad to hear it was of some help.
@tinkeringlabplus25165 жыл бұрын
Very good tutorial. The calibration was well explained.
@kenoath0079 жыл бұрын
Thanks so much, very helpful! Even more so now that I realize I purchased the fake totally unaware they existed. I'll follow your instructions and calibrate and test if it's rubbish I'll try and get my money back.
@scullcomhobbyelectronics17029 жыл бұрын
Ken Oath Glad it was of some help.
@carlosclaptrix8 жыл бұрын
Thanks for the good explanation!
@magicmaui777 жыл бұрын
Thank you for the callibration tip - also works on my Hype-RC knockoff. How ever.. I've noticed if you callibrate at 5v f.e. it's way off at 12v and vice versa. Not good if you charge batteries with different voltages like I do ..
@robc30566 жыл бұрын
Thanks alot was almost gonna buy a fake it had gold writing but different lettering/printing on the front . thanks again !!
@IamWedge6 жыл бұрын
Thanks for the info just bought one of these. It arrives tomorrow. Ill know what to look for. Thank you.
@scullcomhobbyelectronics17026 жыл бұрын
Your welcome.
@MixYourWay3 жыл бұрын
Hi! The lack of a fuse concerned me. Could we install one of our own? Any pointers would be greatly appreciated!
@josephgraham10654 жыл бұрын
Hello I wish I would have watched this before I ordered the fake one... But thanks for showing me how to calibrate it. Hopefully once calibrated it will work well. Very good video thanks for taking the time.
@Val-ud3oi8 жыл бұрын
great job, thank you. love to see that there still are appasionate professionists like u
@scullcomhobbyelectronics17028 жыл бұрын
+Val Thank you.
@hyzenthlay71517 жыл бұрын
Did SkyRC make a previous version of this charger? I'm asking, because mine has the same lettering on the front as the fake one, but it has the SkyRC laser sticker on the back and came in the same box as the real...
@Sparkeater8 жыл бұрын
Hi, thankyou so much for this detailed teardown. it prompted me to do more research, the multiplexer that sends the voltages to the atmega is very often faulty (amongst the other things that can be faulty with the clone) But: if you can replace that, it gets A LOT closer to reading the actual voltages, and ideally, eliminate the overcharging problem. it's a 4051 multiplexer. it's under the screen. I hope someone can figure this out without pictures.
@scullcomhobbyelectronics17028 жыл бұрын
+Sparkeater Thanks for you comments.
@bobanofat25857 жыл бұрын
great video. calibrated my charger. actually surprised to find mine was fake as this charger was bought in a walk in store I presumed sold the genuine article.
@scullcomhobbyelectronics17027 жыл бұрын
Thanks. There are a lot of fake ones about but they still in the main work quite well if calibrated.
@Otiesh7 жыл бұрын
thanks for the information , I just bought one recently though I haven't received it yet and I will check details once it arrives
@scullcomhobbyelectronics17027 жыл бұрын
Your welcome.
@jayk2k Жыл бұрын
Hi , Couple of questions if that is ok 1, once it finishes charging and beeps , you have to turn if off manually or it carries on charging ? 2, Would you know if tablet and laptop batteries can be charged and tested on this ?
@G56AG8 жыл бұрын
Thanks, this enabled me to calibrate both my chargers.
@MikeGrayM707 жыл бұрын
Didn't know this unit could be calibrated. Thanks!
@scullcomhobbyelectronics17027 жыл бұрын
Glad it was of help.
@glennextra9 жыл бұрын
Great job on this video,.Glad you demonstrated the calibrate function too. I just sub'd, and greetings from Vancouver Canada
@scullcomhobbyelectronics17029 жыл бұрын
glennextra Thanks. Vancouver is a great place I visited and toured there about 10 years ago, took the old train up to Whistler. Remembered getting the family to cross the Capilano Suspension Bridge!! Also toured Vancouver island, love to go back some time.
@glennextra9 жыл бұрын
Scullcom Hobby Electronics I live 5 min from Capilano Suspension Bridge, came here on vacation in early 1990's and decided to stay, love this place! The Whistler train was closed shortly after your trip about 10 years ago. I am in the electronics business, mostly semi's but also involved with batteries, so I stumbled across you channel. My daughter as a channel with about 25K sub. I wish you best of luck with yours. BTW, What city are you in?
@scullcomhobbyelectronics17029 жыл бұрын
glennextra Well the train was very old when I was there so not surprised. I don't normally give my home location but you may be able to tell from my voice I am a Yorkshire man!
@coffeesineurope42957 жыл бұрын
Saved me some money on a future mistake. Thanks and greetings from Texas.
@scullcomhobbyelectronics17027 жыл бұрын
Glad it was of some help.
@willingtodieyoung3 жыл бұрын
Need help I am new in this field I have two questions 1. How much time it takes to full charge 3s 5200mah lipo 30c? 2. It says 3.7v on battery as wel on imax charger menu, but it goes to 3.84v and sometimes 4v is it safe or normal?
@gseccull4892 жыл бұрын
hello, unfortunately i did not know about fake chargers when i purchased my used charger. so what components would i have to change to make a fake one read the correct readings. also i have since found out that once it has been calibrated, you cannot get that calibration option back, have you found a way to get it back????? looking forward to your reply.
@johngibson74474 жыл бұрын
Hi, you've described the difference between the two chargers but how do you know which is the fake,maybe the fake is the better one ?
@toneault74994 жыл бұрын
hi.im hoping you can help..ive just seen this video. only to find i cannot do as you do .. ie it will not let me in to make changs . but when i set the program from lipo to liion the meter did not move so i put my avo in place to find the bat volts were 4.21.. but display is 4.10. and did not move.. you might like to try your self. atb tone.. p.s. i tryed on the two new chargers and my old one . both the same..on 1s
@darkkevind7 жыл бұрын
What an amazing and informative video! Thanks so much. Can you tell me please? Can you calibrate with a battery that's not fully charged as long as you know it's voltage obtained through a multimeter?
@scullcomhobbyelectronics17027 жыл бұрын
Thanks for your comment. Yes you can do what you suggest the important think is that you know the voltage.
@johncoops68973 жыл бұрын
Yes, but what is most important is that you calibrate using a battery pack of about the same total voltage as what you will normally charge. The fake IMAX is not very linear, so even if perfect calibration at 12V, it won't be accurate at lower or higher voltages.
@mohamadiqbalalaziz54343 жыл бұрын
Hello prof, can you tell me the imax can modif for fature mode motor brush? Break in.. same like thunder machine or antimatter
@oguzhankocak75943 жыл бұрын
Which one should ı buy IMAX B6 mini or IMAX B6 V2?
@lukasostar30084 жыл бұрын
so, is the knockoff a good charger? should i go for it? i'm currently unable to source the real thing... also, i'm assuming this is 'smart enough to leave charging safely overgnight? thanks
@johnbee15744 ай бұрын
very good review, interesting side note some of the later copies did away with the calibration function something I thought was essential to have
@cscentoamore17 жыл бұрын
boa noite, amigo! parabens pelo video, sou brasileiro, muita coisa eu compreendi porem algumas não, minha duvida é a seguinte : o funcionamento do IMAX B6AC fake é semelhante ao original ou nao é confiavel? obrigado
@abdulben93047 жыл бұрын
hi thanks for the video. I am having garage and i want to add hybrid service . So, what is the best hybrid charger do you think in the market for Nihm batteries (Toyota&Honda). I would love to hear from you thanks
@scullcomhobbyelectronics17027 жыл бұрын
Hi Abdulafah, I have not had the need to use a hybrid battery charger but you could check out the following link it may help hybridautomotive.com
@av69667 жыл бұрын
Hope this don't explode with that tiny PSU will have to devise a case for charging things in my room, thanks for showing me how to calibrate it!!
@alphameric37865 жыл бұрын
impressive and professional. Thank you Sir for a very educational clip.
@rjasontwenty10993 жыл бұрын
so you can actually use the fake charger to charge your airsoft batteries, and it's safe to do so?
@miroslavlukes18628 жыл бұрын
Dear Sir, thanks for your effort resulting great, comprehensive and helpful description.
@scullcomhobbyelectronics17028 жыл бұрын
+Miroslav Lukeš Thanks, you are welcome.
@jackiedines52292 жыл бұрын
I have two of these, had no idea they were fake! I cannot get either of mine to go into calibration mode, any help would be appreciated.
@WarthogARJ7 жыл бұрын
Thanks: good video. I have a fake, bought from Ballistic Performance Components and they added their own sticker to the front. But mine is fake: obvious from your video. It doesn't charge a 4S L-Fe battery: the charging cuts out at 3.25v/cell, instead of 3.7v as claimed. So I only get it to about 20% capacity. Any ideas if it is possible to change the settings? Like I see you can calibrate it: that's not in the manual I got, nor the manual from the MAX B6AC. So maybe there are more "hidden" functions. Thanks for the video.
@paulgriffiths36134 жыл бұрын
Hi,I calibrated the (fake)unit as you described.My battery is a 4 cell,2200mAh,14.8v.I have inputted all the correct values,but when I try to charge the battery,i get warning beeps and the message,Low Voltage.What should I do?Thanks in advance.
@stigonutube2 жыл бұрын
Thank's for the video, i just bought a fake and i remember watching this a few years back revisiting,now i see why my "stop" button is less tactile than other 3 new out of box today, looks like i need to complain/refund.half the quality half the price to original unit .LOL..btw seems they have changed firmware or something as it's no longer easy to calibrate like you show..
@HardcoreMusik8 жыл бұрын
Is there a way to use an Power Supply to calibrate ? Tekpower TP3005 on Amazon (not my, but similar) I do not have a good multimeter. Or is there a other way? With an 7805...or is this too imprecise ?
@Citroable8 жыл бұрын
+Captain DJ If you use your multimeter to measure the output voltage from the power supply, then yes, you can use it, but dont trust the voltage the power supply states.
@michaelpotter85478 жыл бұрын
I'm glad you didn't just say fake and toss it.. Nice review and setup even for the *cough* clone.
@lookoutleo8 жыл бұрын
+Michael Potter yes ive used one of the fake chargers for a year now to charge everyday an 8amp 6s battery and it had done this perfectly , i havent changed calabration and does it fine
@clintoncoker67 жыл бұрын
Yeah, weird that he reviewed and calibrated the clone and not the real one...
@RCWilliam1237 жыл бұрын
Clinton Coker you didn't pay attention. he calibrated the fake one and said the genuine was spot on. and then kept on the review with the real one. got it now?
@famady5 жыл бұрын
No he continued the review with the fake one, wich has B6AC printed in white on it.
@Seegalgalguntijak9 жыл бұрын
I also noticed the smaller electroytic capacitors. But what is the difference in price between the two?
@scullcomhobbyelectronics17029 жыл бұрын
Seegal Galguntijak In my case the difference in price was only about 20% more for the genuine one. Look for the SKYRC silver label on the base of the unit.
@jersimdanielaraya-salinas78684 жыл бұрын
Gracias! Muy Buena información. Now i know that my imax b6ac is fake, but thanks for teach us use the fake one, and calibrate it.
@aldograsso58727 ай бұрын
Hello, congratulations for the very interesting tutorial. I wanted to say that I made several attempts following your instructions to the letter for the calibration but, when I turn it on, the calibrate screen does not appear, the lipo charge screen appears. Did I do something wrong? Thank you
@carlwill50099 ай бұрын
I did not know they made 2 different types. Thank you for the video and information.
@tdcentral34663 жыл бұрын
Hi Louis, first thank you! I just bought one and tried the calibration, the display shows differently with 6 values at 0. Are you familiar with calibrating in this case?
@johncoops68973 жыл бұрын
You are referring to the genuine SkyRC charger, or a clone? In the SkyRC models, search online for SkyRC News Blog titled "[Update Notice] B6AC/ B6mini Calibration]" to find the new firmware v1.14 (for old models) and the calibration instructions.
@kanarimentos70569 жыл бұрын
man you are very good teacher ...learn from you i used, to do fix electronics in my country tv vcr all kind but i stop like 16 years i feel happy when i saw your equipments lol let me know from were to buy original one do you prefare separately or combination means with out transformer or combo like you have in video thanks
@scullcomhobbyelectronics17029 жыл бұрын
+Kanari Mentos Thanks. Both with or without AC transformer are OK.
@kanarimentos70569 жыл бұрын
Scullcom Hobby Electronics thanks man
@jayk2k Жыл бұрын
What are the small white connector on the side , for balance charging , called ?
@zaidhussain52063 жыл бұрын
Thank you so much for sharing this knowledge , it is very informative to me, wish you good luck & e safe.
@smeemcgee84147 жыл бұрын
tried to do the calibrate thing like you did but it does not come up have a knock off
@davidwatson73297 жыл бұрын
Hi there.. Don't know much about batteries chargers etc, but my son has a xtar vc4 and was hoping this type of charger may be better for him, what's your opinion on this, batteries are for his 9v drill etc (converted) and random batteries he has floating around e place ...?
@scullcomhobbyelectronics17027 жыл бұрын
These type of chargers are really aimed at balance charging of multiply cells. This requires the multi-cell battery to have a balancing lead in addition to the normal two connection leads. So if your 9 volt battery also has a balancing lead this this charger is just fine. If your battery simply has only two leads (+ & -) then there may be cheaper options for you or you could try build your own at low cost.
@MQuigleyopiod6 жыл бұрын
Great review. Thanks for showing us the difference is those two products. very interesting
@scullcomhobbyelectronics17026 жыл бұрын
Thanks for your comment.
@lutsifer5847 Жыл бұрын
How to calibrate the balancer? The second cell constantly shows too high a voltage, no matter which battery I connect.
@dkongul8 жыл бұрын
so buy the clone one, change 2 resistors(optional) and calibrate done deal. way cheaper than skyrc wants even if you can find one in stock. set maximum charge to 4.1 volts to improve battery life (long term) and prevent overcharging. and you can always cut a hole in to the case and add a fan which i will definitely do even with the original one.
@luisfj96 жыл бұрын
between the real charger in the fake charger, how long can these two chargers can last before they have to be replaced? At some point these two Chargers will no longer be able to balance the batteries out properly?
@chrisellison77206 жыл бұрын
The mostly surface mounted components used have a pretty good lifespan providing they're not abused. Avoid running it flat out and you might get 15 - 20 years, say 10 years to be on the safe side. Mine's 7 years old and still working safely within it's original specifications and tolerances.
@SelkoFPV6 жыл бұрын
on the 17:00 minute of the video you can actualy pres enter and the LiPo text flashes,then you can change it to LiIo Life LiHv
@cekpi76 жыл бұрын
Did anybody tried to see how much current can psu push? Had no luck finding online except that psu is really bad and should be replaced with laptop brick, i burned my clone so im thinking is it worth to get b6 again or b6ac
@differentname80518 жыл бұрын
Great, thanks for the heads up as I am in the market for one of these.
@scullcomhobbyelectronics17028 жыл бұрын
+wayne murphy Glad it was of some help.
@odortiz7 жыл бұрын
amazingly in-depth. but i would have liked to have seen a balance demo
@scullcomhobbyelectronics17027 жыл бұрын
Thanks.
@LordKaos6669 жыл бұрын
Nice work! Can you tell me if it´s necessary to calibrate the original one? In version 2, the combination of buttons when powering on, takes to a "system is updating" message. Thanks!
@scullcomhobbyelectronics17029 жыл бұрын
***** Thanks. The genuine SKYRC unit comes calibrated so is OK.
@cmj200028 жыл бұрын
The capacitors on the genuine look larger.
@vicc67444 жыл бұрын
does the "real" unit come with battery plugs?
@dparham7 жыл бұрын
i just bought the SKYRC B6AC V2 and it powers up then powers off... if I let it sit awhile it powers up and works for a few minutes then powers off... I'm suspecting a bad power supply... but while Im checking... can I use the DC plug to a deep cycle 12v /60amh gel battery for a wheelchair?
@scullcomhobbyelectronics17027 жыл бұрын
As the SKYRC B6AC V2 has a DC input jack you can supply it with an external 12volt source. . Your deep cycle 12v /60amh gel battery for a wheelchair should be just fine but would recommend added a fuse in series with it (say 6 amp).
@dparham7 жыл бұрын
ok thanks! I'm now just looking for batteries lol i have a few and I ended up returning that charger as they were willing on sending out a replacement asap and the new one is working great! but Im glad to know I can hook up to battery :D I thought it would be ok but just making sure!
@pkf41242 жыл бұрын
Thanks for this, just nearly bought one, looks like its a fake so well dodged.
@cbic98065 жыл бұрын
Good job, I've never seen anybody else do the calibrations before
@thegusk5209 жыл бұрын
When you were setting your voltage wouldn't it have made more sense to go a tad higher than +15? I'm just guessing but 4.17V would come in at ~ +20. So maybe a better setting to save would be ~ + 17-19. Basically just one click down from the 4.17V reading
@FM-fn7eo3 жыл бұрын
can I charge 2s or 3s or 6s of 18650 if I connect only + and - wires , without balance wires ?
@angeleiger7 жыл бұрын
A very good review. You are a professional. Thanks a lot.
@FrustratedBaboon8 жыл бұрын
Just bought mine and it does not match either of your boxes. It does not have gold printing and it does however have an authentic sticker on bottom. It did say it was not fake on Amazon. It works like a charm and I am not going to open it. :-). Thank you for bringing this to everyone's attention. I think the company just changed their printing that's all.
@scullcomhobbyelectronics17028 жыл бұрын
+FrustratedBaboon Thanks for your information. Genuine ones should have a authentic sticker on bottom. There are may fake ones out there some of which are better than others. If you are happy with it and it works OK then that's fine.
@fun_ghoul6 жыл бұрын
6:04 I wonder if that's because 1 lb. (or 450g) is often the magic number for cheap shipping. Hmm...
@UncontrolleDperson3 жыл бұрын
Very useful guide! And what is the difference in price between two products?
@Tonyplat985 жыл бұрын
Very nice comparison. Now i understand why I got the genuine instead of the knock off =)
@p.v.jayaprakash44944 жыл бұрын
Informative, nice. Sometimes 3 cells in parallel does not detect . Any info on that.
@juancarlosoanelli96265 жыл бұрын
someone can have an answer with this charger. will use again after a while of having it saved and I find the surprise that does not want to charge more than any battery, the problem is not to read the resistances. Have not found bats, there is no Asian bat meter, read the voltage and the cells but not the resistance, this problem or any question?
@micheals19924 жыл бұрын
I tried this method to calibrate my fake charger and it seems to have bricked the unit, when you switch it on now the controls don't work and it instantly runs a discharge cycle on a 1s lipo, I tried to connect a 1s lipo to see if I could cancel and fix the glitch but it just says "overvoltage" and freezes on that screen instead of "connection break"
@causwayspeedway7 жыл бұрын
Very good review,learned to calibrate these things,thanks :D .
@scullcomhobbyelectronics17027 жыл бұрын
Glad it was of some help.
@gustavopellegrini87606 жыл бұрын
Excellent review. Thank you so much. It was really helpful for me.
@scullcomhobbyelectronics17026 жыл бұрын
Thanks. Glad you found it helpful.
@Derundurel7 жыл бұрын
It's nice to see a proper AVO meter on the bench!
@scullcomhobbyelectronics17027 жыл бұрын
Yes I have a nice collection of all the different AVO mulimeter models.
@ricoeltico1 Жыл бұрын
spot on. Simple explanation on how to use a b6 snide charger. Thankyou. (BRAVO)
@fod3er9 жыл бұрын
Thanks for posting this video, I am looking to buy one of these & now i can make sure i get the real product. Thanks :)
@scullcomhobbyelectronics17029 жыл бұрын
Ifodder Thanks. Your welcome.
@kanarimentos70569 жыл бұрын
Ifodder hi did you find from were to buy original one
@garrygemmell56768 жыл бұрын
I am about to buy one i guess its fingers crossed. Good video i will be using it when i rip mine apart to find out if its fake!
@xXAsunaxKiritoXx8 жыл бұрын
Holy shit. My fingers are crossed now bc mines coming in tomorrow DX
@jameslinden63048 жыл бұрын
When you buy it look for the picture of the bottom of the unit. If it doesn't have the holographic sticker it's not genuine. If they don't show the picture of the bottom, you can assume it's not genuine also. The genuine one is also much higher in price.
@garrygemmell56768 жыл бұрын
James Linden From what i understand the clones work perfectly well but just have low grade components so maybe wont last so long but measurements/discharge etc all work the same -would this be correct - might be an idea for another video James - compare the performance of the two?
@jameslinden63048 жыл бұрын
They're not really "low grade" but aren't overkill as much as the genuine charger. Mine has worked for 2 years without a hiccup. I couldn't afford the genuine at the time I bought the clone, but I knew it was a copy. Most people are freaking out because they thought they were buying SkyRC. I only own the copy so I can't really compare them, and I really suck at videos!
@nomusicrc6 жыл бұрын
Meada Kazuya mine is
@richardnanis5 жыл бұрын
Can you set the desired end-charging voltage for Li-ion as you want, e.g. 4.1V instead of 4.2V ?
@ValleyRC5 жыл бұрын
Yes, it has a separate li-ion mode for older 4.1v cells.
@70xke3 жыл бұрын
Hi Louis I have just bought a genuine B6AC version 2 and am running it together with a PC. I found your explanations very illuminating. The instruction book leaves much unsaid and I would like your insights. I am charging a new 10 cell NiMH battery stack and note that about every 30 seconds the current drops to zero, whilst the voltage stays high. I assume this is a sampling operation of some sort. Do you agree? During a 2 hour charge, this sampling occurred for about 45 minutes, then did not until three samples at about 70 minutes in and finally 12 samples at the end. This looks like normal behaviour but I have seen no comments anywhere Secondly a DVM across the battery during the charging process does not read correctly at all and fluctuates. Using my trusty AVO 8 does give a correct reading. Interesting. Thirdly the whole business of cycling and charge/discharge is not covered well in the book and I am confused. In charge mode there is a More setting to choose cycle count and "R_ PeakCount". Peak count I understand but what is the cycling referred to. A complete discharge and recharge perhaps. Thanks for your time Bruce M