SCX24 Bronco Build Part 10 - Crawler Competition, Full Build Overview, & More!!!

Рет қаралды 20,003

Жыл бұрын

In this video we close out the Axial SCX24 Bronco build series. With the build in a great spot, it was time to see what it could do. In the first part of this video, we journey to Wreckless Hobbies in Wareham, MA for their annual Crawloween event and enter the Bronco in my first ever scx24 crawler competition! Aside from the comp, there were many other amazing things happening at the event. It was amazing to meet subscribers and folks I’ve interacted with through social media. The support and camaraderie in this hobby is truly amazing and I am so thankful to be a part of it. In the second part of the video, I provide a recap of the bronco build for those who have been asking for a comprehensive look at the build. The full parts list will be in the description below. Enjoy!
Affiliate links:
5% off RCAWD: rcawd.com/?ref=E5EBF8Fu - discount code CapeCrawlers
$10 off any order $50 or more: www.fmshobby.com/discount/Cap... - discount code Capecrawlers
Amain Hobbies:
Follow us on Instagram @capecrawlers!
Complete Parts List
Emax Servo kit: www.amazon.com/dp/B09M6YN33H?...
Injora high clearance links: a.co/d/9N1qTeP
Rock sliders: a.co/d/2whTm5p
Overdrive gears: a.co/d/cGlkK7Q
Hex extensions: a.co/d/buQId2q
Chassis (V2 shown in video), link for V1: www.etsy.com/listing/11575561...
Wheels: rcawd.com/collections/axial-s...
Steering knuckles: trealhobby.com/products/treal...
Wheel nuts: trealhobby.com/products/treal...
Hot Racing bumper: www.amainhobbies.com/hot-raci...
Hot Racing bumper mount: www.amainhobbies.com/hot-raci...
Super 8 front housing: littleguyracingparts.com/coll...
Super 8 rear housing: littleguyracingparts.com/coll...
Super 8 Extreme CVD front axle shafts: littleguyracingparts.com/coll...
Super 8 rear axle shafts: littleguyracingparts.com/coll...
Super 8 billet tie rod set: littleguyracingparts.com/coll...
Gripper tires: littleguyracingparts.com/coll...
Flubberstufferz Slymeballz: flubberstufferz.myshopify.com...
PowerHobby 54mm shocks: www.ebay.com/itm/385090964313...
Grizzly Works flex extensions: www.etsy.com/listing/11609168...
Motor and transmission combo: www.amainhobbies.com/furitek-...
Lizard Pro Esc: www.amainhobbies.com/furitek-...
Avatar combo: www.amainhobbies.com/furitek-...
Injora Steel driveshafts: a.co/d/1TwKqMo

Пікірлер: 116

@CapeCrawlers Жыл бұрын

Timestamps Crawloween event: 2:54 Bronco comp run: 8:04 Bronco build recap, appearance: 17:18 Chassis and suspension: 21:50 Drivetrain 26:42 Wrap up and conclusion: 30:58

@Stupidthingsrc Жыл бұрын

I’ve been waiting for this comp video 😂 Thank you

@CapeCrawlers Жыл бұрын

I'll put some more content up from the comp this weekend!

@joshcox115 Жыл бұрын

Just got a bronco and bought most of the stuff on your build list. Can’t wait the mail this week!!

@CapeCrawlers Жыл бұрын

Awesome! Enjoy!!

@davidholmes7787 4 ай бұрын

I love this thing. Honestly inspired my bronco build. I’d like to thing mine is setup very similiar to yours yet doesn’t seem to handle quite as well as yours.

@TrevorParkJones Жыл бұрын

Man the Bronco has come a long way! That event was really cool, congratulations on your victories! I really enjoyed this series building along with you, my Bronco is so much better now for it. Thanks for another great video Adam, take care!!!

@CapeCrawlers Жыл бұрын

It sure has. Thanks for sticking around during the series!

@AddictRC Жыл бұрын

Awesome video the scx6 was sick and your crawlers look better in person can’t wait till the next crawl event and for your next video

@CapeCrawlers Жыл бұрын

Thanks, I appreciate it! I was totally in love with that SCX6. It even had the same wheels as my 1:1 Gladiator!

@AddictRC Жыл бұрын

@@CapeCrawlers oh really no way thats sick

@andrewrichey7374 Жыл бұрын

Love how the tires conform to the rocks , On that red bronco, super cool course

@andrewrichey7374 Жыл бұрын

Man this is super cool, really appreciate your sharing watching now

@WieAr1_RC Жыл бұрын

What a nice end to the Build Series. I watched them all and took a few ideas on what i would like to achieve. Thanks for explaining and showing things so clearly!

@CapeCrawlers Жыл бұрын

Thanks for watching!

@hbrc3867 Жыл бұрын

Great to see the changes along the way in the bronco Congratulations on the competition 👍🏻

@CapeCrawlers Жыл бұрын

Thanks! We wrapped this bronco up just on time to start on the TRX4M version 😁

@RCCrawlerz209 Жыл бұрын

Awesome video, Adam! That SCX6 Gladiator looked pretty dope! 💪🏻😎

@CapeCrawlers Жыл бұрын

Thanks! It was an awesome rig! I was totally in love with it. If it had been blue I would have been begging him to sell it!

@RCCrawlerz209 Жыл бұрын

@@CapeCrawlers Should get one & do just that!

@andrewrichey7374 Жыл бұрын

That’s awesome dude congrats

@geraldanthony7324 Жыл бұрын

What a day that drift track was nice all the crawlers are 🔥🔥🔥💪🏽👊🏾✌🏽👍🏽

@CapeCrawlers Жыл бұрын

It was epic. That place is so rad.

@trejodaniel Жыл бұрын

Amazing series! Learned so much from you. Congrats on the comp win and keep crawling Adam!

@CapeCrawlers Жыл бұрын

Thanks for watching! It was a great way to end the build series.

@mark.scale.models Жыл бұрын

Congrats on the win Adam! Nice run with the Bronco, looked like a great time. You had me at "Ware-Ham" 😎

@CapeCrawlers Жыл бұрын

Thank you! Too bad the comp wasn’t in Sandwich, which is right next to our town 🤣

@suemisslbeck7023 Жыл бұрын

An amazing transformation for the Bronco. I am in the process of ordering the parts for these upgrades on my red Bronco. Congratulations on the win. Really enjoy following you here as well as Instagram. Thanks for all you do for the RC world.

@CapeCrawlers Жыл бұрын

I appreciate the support! This bronco build was my favorite build I think. It was so fun to be able to share it with the community from start to finish.

@CaseyD406 Жыл бұрын

Nice little finish to the series. I have learned a lot and owe you the credit. Going forward I would love to see a max smasher build.

@CapeCrawlers Жыл бұрын

Thanks! I will definitely build out the max smasher!

@cookingwithbacon9023 Жыл бұрын

Glad to see you Win ! That intro was funny

@CapeCrawlers Жыл бұрын

Thanks! Cheers LOL

@snakehaven1 Жыл бұрын

Love it brother

@CapeCrawlers Жыл бұрын

Thanks for watching!

@greggrube2948 Жыл бұрын

Congrats on the 1st place, sweet looking Bronco. Great video brother!!

@CapeCrawlers Жыл бұрын

Thank you! Love the Bronco and stoked with how the build turned out.

@kendietz355 Жыл бұрын

love the video

@CapeCrawlers Жыл бұрын

Thanks for watching! Glad you enjoyed it!

@scottbraithwaite3143 Жыл бұрын

Great video as always. Definitely some of the best 1/24 scale content. My OCD appreciates the structured aspect of the vids. I like the bronco, but snaggletooth is right on. Pins and 4ws for the win!

@CapeCrawlers Жыл бұрын

Thank you! I'm glad you appreciate the structure. I too crave this in my life (and content) LOL

@Zeisslermusic Жыл бұрын

Thanks ❤🇩🇰

@andrewrichey7374 Жыл бұрын

Broncos looking awesome, love my little red bronco it is 94% mofo RC all of his brass parts, I have thought about looking at a set of those axles housings. Appreciate you Sharing will catch you on the next one

@cashtangoproductions7308 Жыл бұрын

Great video and congrats on winning! The only thing missing on the bronco build is to tidy the wires up a bit but otherwise amazing and inspiring build!

@CapeCrawlers Жыл бұрын

Thanks! I agree, the wires are a constant frustration

@egibson2266 Жыл бұрын

Man what an awesome series, and channel. I have been thinking of grabbing one of these for so long, and I finally grabbed a bronco that Santa will bring me for Christmas haha. I love the added details of the hardbody offers. I will be referencing all of these vids when moving forward with mine, and the prices for all the parts is a welcome surprises as I am currently rebuilding and upgrading a vintage Team Associated T2… wow, that’s gets expensive.

@CapeCrawlers Жыл бұрын

Thanks for watching! Enjoy the bronco! I came from modifying real jeeps so I felt the same when upgrading these. $20-$100 for a good mod, sign me up!!

@VS666 Жыл бұрын

what a sick hobby shop, man I wish we had something like that in western WA congrats on the win! love the channel and I fully blame you for getting me into small scale crawling 😅

@CapeCrawlers Жыл бұрын

Thank you! Wreckless is amazing. I will shoulder that responsibility and will continue to be an enabler for your new addiction 🤣

@all-natty Жыл бұрын

love the intro😂😂

@CapeCrawlers Жыл бұрын

🤣🍻

@KenMrKLC Жыл бұрын

Nice, you just came up on recommended... I live on the Cape as well and race at Wreckless... Just got back into RC after 30 years or so away. I'm just into 1/10th scale carpet racing right now but I like these mini crawlers and such. I was going to go to the event but ended up not making it. Nice channel you got going on here!

@CapeCrawlers Жыл бұрын

We should meet up some time! I found some other folks from the cape up there and they recommended some spots around Yarmouth to try.

@shafiqjan1474 Жыл бұрын

Just watched all the Bronco videos. I had to figure out a housewarming gift for my nephew. 3 SCX24 Broncos 3 upgrade servos Kyosho crawl tiles My boy loved it and his roomie got 1 too. Upgrades are coming together We all get... -brass F diff cover -alloy F Axle -alloy servo mount -alloy shocks -alloy steering links -brass skid -SS hi-clearance 4 links -brass knuckles -steel wheels with F brass rings -PL Hyrax tires Mine will get a few more leftovers from my parts box just because. Thanks for sharing your progress. 👍

@CapeCrawlers Жыл бұрын

Thanks for watching! That is an epic build list you've got there - Enjoy!!

@shafiqjan1474 Жыл бұрын

@@CapeCrawlers I know it, you convinced me about the Super 8s so I signed up for notification of fronts in stock. Those will go on my Heavy Deadbolt.

@shafiqjan1474 Жыл бұрын

I forgot, we will all get Flubberstuffers 3d inserts as well, the boys are gamers after all

@andrewrichey7374 Жыл бұрын

The FCX 24 power wagon yeah just got from Treal there are aluminum transmission casing purple they have other colors, waiting on the steel gears from FMS it’s going in my grim reaper, well we’ll catch on the next one piece and chicken grease 😁😁👍👍😎

@CapeCrawlers Жыл бұрын

I just got my steel gears but haven’t put them in yet. I’m looking forward to that project. Treal is doing great things for the fcx!

@OneLoveRC Жыл бұрын

I love your rigs definitely inspiring me to build one like yours as you can see mine in my profile picture not as articulated as yours but still super fun I'm from Plymouth Mass my brother lives in Wareham currently live in San Diego thanks again for making the sweet videos keep up the good work have a cool day

@CapeCrawlers Жыл бұрын

Thanks for watching!! Enjoy your build! If you’re back in Massachusetts hit me up!

@HobbyPerfeXion Жыл бұрын

Great vid series. Took quite a bit from this. Might have to take a ride to Wareham sometime and check out that hobby shop. I went to one in Fitchburg a couple of weeks ago. Wasn't a great experience but I'd give them another go at some point. Wareham is a bit of a haul for me, but looks like it might be worth the trip.

@CapeCrawlers Жыл бұрын

Thanks for watching! If you go to wreckless let me know and maybe we can meet up. I’ll bring the bronco!

@HobbyPerfeXion Жыл бұрын

@@CapeCrawlers definitely will let you know. Would be good to meet you in person and "talk shop".

@basc5026 Жыл бұрын

Outstanding Bronco CC! With all those part I’m surprised you use the stock plastic skid and didn’t give it the red injora skid to go with the injora red links I feel you’ve done a lot with the SCX24 trucks so I would like to see you build a 24 scale buggy Congratulations on 1st place! 🎉

@CapeCrawlers Жыл бұрын

Thank you! I honestly never thought about the skid. It would be a nice finishing touch though! I would also like to do a buggy, possibly a mini rock bouncer!

@R1ftd Жыл бұрын

Can you make a video testing if you should take your foams out or your wheels or not and see witch one works better

@CapeCrawlers Жыл бұрын

Yes, I can do that. I’ve got to wrap up some other projects first but I can put this in the queue

@greanbeanrc6888 Жыл бұрын

Do a dually build with the c10

@CapeCrawlers Жыл бұрын

My son would love that.

@joseramos1301 Жыл бұрын

Just an idea for content. You can do a video putting the stock fcx24 portal axles on the new 1/18 scale jeep you got as a price. That let's you other links and shocks to upgrade that jeep. I have one and it's one of the best electronics of that 1/18 scale line up. Looking forward to content on that jeep.

@joseramos1301 Жыл бұрын

Let's you put*

@CapeCrawlers Жыл бұрын

That's a great idea. I honestly never even thought about modifying this new one, but since it's made by FMS I can see the opportunities available for parts swapping.

@sonorangaming449 Жыл бұрын

IDK if you've seen yet, but Treal released a brass, and aluminum extended link set with driveshaft for the FCX, as well as brass hub extensions, and aluminum servo horns for stock servos.

@CapeCrawlers Жыл бұрын

No, I haven't seen that! I am so thankful for the servo horn option!!

@sonorangaming449 Жыл бұрын

@@CapeCrawlers Just saw them today, myself. I ordered all of it, and I'll try to make a video about them when I get them. I will also be putting out a video tomorrow on a powerhobby 48mm/treal shock hybrid for the FMS. Didn't get to finish today before work.

@CapeCrawlers Жыл бұрын

@@sonorangaming449 I just ordered the servo horns and hex extensions 👍🏻 Looking forward to the video!

@captainkidd1329 Жыл бұрын

I think your boy was more interested in the beat up rusted square body

@CapeCrawlers Жыл бұрын

Yep, definitely was!

@WillPangle 11 ай бұрын

Hey Adam love your videos! What shock spacers are you running? I can’t mount my shocks to the frame without bending them with my super 8’s.

@CapeCrawlers 11 ай бұрын

Thanks! These are from Grizzly works RC on Etsy. The flex extensions he makes come with the spacers and thats what I am using here.

@travis3567 Жыл бұрын

Hey brother, I’m looking for some advice. I ordered the bronco SCX24, injora beadlocks with tires, topcad brass +5 mm hex counterweights, emax analog servo with metal arm and tray, aluminum injora steering links and 2x 11g diff covers. I’m going for a beginner crawler build. I’m planning to do high clearance links, motor, axles, and brass wheel inserts in a few months once this initial build gets boring. Shopping for shocks now too

@CapeCrawlers Жыл бұрын

Sounds like a fantastic start! Happy to help any way I can!

@GeezerGramps Жыл бұрын

I like to see what you could do with the TS1 chassis, it’s 3d printed. You can buy it printed or the stl file f print it yourself. It’s designed to use a JLU but my buddy build his with a Deadbolt. It comes with links so really doesn’t matter what you start with. I’m building mine using a Proline Powerwagon body. Pretty interesting design. I saw the little guy eyeing the monster trucks did he get a new one?

@CapeCrawlers Жыл бұрын

Do you have a link to that chassis? No new monster trucks for Axel, but Christmas is coming, so we’ll see!

@GeezerGramps Жыл бұрын

I drove mine Friday night for the 1st time. It handled amazing well with very few mods.

@R1ftd Жыл бұрын

Here’s my problem I got 42 mm suspension took out the springs. Relocated them to the chassis then put 60 mm injpra wheels with injpra snap 1.0 rims but the wheels rub and make a clickigg sound -- do I need to fix it -- if I do how.

@CapeCrawlers Жыл бұрын

Clicking sound could be the tires hitting the bumpers. I had to swap out my front bumper for a small one and trim my rear one because I was getting major rub/binding on the bumpers.

@R1ftd Жыл бұрын

@@CapeCrawlers that’s what I did. Just it hasn’t game yet

@MMRCx Жыл бұрын

I wish my country had events like this, all the stuff I like, drifting, crawling.. do you have issues with the bronco doing vertical climb? What’s the sharpest angle you can climb with it?

@CapeCrawlers Жыл бұрын

I haven't measured it's maximum, but I estimate it's somewhere around 55 degrees. It can climb the chute on my indoor course, which tops out at 52 degrees. It struggles on vertical obstacles like rock ledges because it will flop over backwards in those situations.

@jasonleslie5379 Жыл бұрын

I keep running into servo vs frame rails binding. I'm thinking, nip the frame, body mount the bumper. ? But that might require body clips, not magnets/velcro. Thoughts?

@CapeCrawlers Жыл бұрын

Have you trimmed the ears on the servo? You shouldn’t have to trim the frame itself. Clipping the servo ears and sanding them down worked for my builds. The bronco stuck pretty bad initially

@jasonleslie5379 Жыл бұрын

@@CapeCrawlers nipped the ears asthma night. I'm going to lube it next run. Haha

@TheDanFromOz Жыл бұрын

Great job fella. What size/type slymeballz inserts did you use?

@CapeCrawlers Жыл бұрын

Thanks! V33 for the inserts. 62mm I believe

@TheDanFromOz Жыл бұрын

@@CapeCrawlers Thanks & Happy Holiday's fella!

@MH-bc5si Жыл бұрын

How do you stop chassis twist from the torque of the komodo? I build an almost identical setup and it twists the chassis pretty bad.

@CapeCrawlers Жыл бұрын

With no springs in it and sitting bottomed out it doesn't twist too terribly. But stiffening up the suspension and/or links can help mitigate that

@sameold77 8 ай бұрын

Do you ever sell any of your RC trucks? I would like to buy this Bronco to match my red 1/10 Bronco. Great stuff.

@CapeCrawlers 8 ай бұрын

Occasionally I do. I may sell some this winter to make space for new projects. I’ll put up a post if/when I do

@sameold77 8 ай бұрын

Great. I will look for that.

@kendietz355 Жыл бұрын

how much money do you think you spent on the bronco over all?

@CapeCrawlers Жыл бұрын

Oh gosh.. that’s a loaded question! Probably $800 including the rig

@WOLFTRAXRC Жыл бұрын

Thoughts on panda 🐼 r/c

@CapeCrawlers Жыл бұрын

I like the looks of them! I’ve never had my hands on one to give you a first person perspective, but they look great!

@XtrmTJ97 Жыл бұрын

Do you find that the flex blades unload unexpectedly?

@CapeCrawlers Жыл бұрын

Only if I have them too tight or if the screw holes aren't sufficiently big enough to allow for free movement. Sometimes they would stick and then suddenly release. Not sure if that's what you're experiencing. But if they're dialed in, I feel like they work fine.

@XtrmTJ97 Жыл бұрын

@@CapeCrawlers Thank you for your response. Personally I found them to unload unexpectedly and caused me to flop over. I will work with them some more and see if I can get them to work. Thanks again.