Hahaha whatever! I love this thing. It’s so much fun and gets a ton of attention. Everyone compliments it and wants to know what it is. Always the topic on conversation whenever I have it out.

Hahaha you’re right! I see it now too but I still want one. They look like a ton of fun.

@@twenty7squared congrats!! I just found out about these and now planning out my purchase.

Much love man!!

Absolutely! Will have some video of it on water soon!

It’s a lot of fun!

Much appreciated! Love it. Posted some more videos of it out on the water!

Haha the fire hydrant actually is mounted under the captains chair. But I have a second back up one in the underfloor storage.

Great ear!

Heck yeah! The small size is an awesome feature.

Heck yeah! The small size is an awesome feature.

Absolutely! Check out my channel. I’ve got about 5 other videos about the Switch.

It really is!

I love it!! Out right now doing some video on the water!! Will have that you soon!

Hey there!! So exciting! It’s a ton of fun. I initially planned to put the name on the side, but the hull material is textured and it wouldn’t stick. I designed and made the decal myself! It’s about 11.5”W by 6”H.

@@twenty7squared Wow! You did a great job! Did you paint it on? Or is it some kind of adhesive? I have a vinyl cutting machine, so I was planning on designing something and cutting it out on that. Then I saw your video and really liked what you did. (Yours is the first one I've seen with a name on it, BTW.)

@@amkenkentable I used my Cricut! It’s just the premium outdoor vinyl! Thanks so much! And happy to see I’m only one with a name right now! Haha

@@twenty7squared Awesome! Thank you so much! I'll order some of that for my cricut right now!

I don’t believe so. Many people have said they had to remove the Bimini top to fit it in a standard garage. It sits up pretty high. Pretty sure it’s just over 8’ by a couple inches.

Yo! It’s a little over 8’ on the trailer if you put the Bimini top down. You’ll have plenty of room if your garage door is 17’ tall.

I designed and made it myself. It’s a vinyl decal that I made on my Cricut and put it on myself. I was going to put it on the side of the boat but the hull is textured and it wouldn’t stick so those back window panels were a perfect spot. One on each side.

@@twenty7squaredThank you, it looks great. Enjoy the Switch!

@@josephtaylor3857 thanks!

Height with Bimini is 8'2". It will not fit with a standard 7' garage door. Even tight with an 8'.

When you’re coming out of the water, there is a handle molded into the plastic bumper. And when not in water you just can hold on to the railing on the backside of the boat.

I could but sadly not until April-ish. I live in Ohio and it’s already put away for the winter. 🙁

Love it!!!

Yeah it sits high. I was hoping to fit it in my garage but it’s too tall.

I know it’s a hassle, but have seen people dump the air out of the tires to get in and out of a garage. And I used to have a lifted golf cart I would have to lower the tire pressure to almost flat to get it in and out of my enclosed trailer. Worth it to be able to keep it out of the elements.

Where I live in Ohio it’s too cold for year round in my opinion. Id leave it in water all spring / summer / fall but once winter hits best to get out of water and winterize it. I don’t have it docked on the water because there are several different lakes around me that I go to so I like to keep it at home.

@@twenty7squared Thanks for the answer, sweet looking boat. Keep us updated, definitely interested in this, and only 10 months to go, lol

@@robhilgert1550 absolutely! I love it. Posted a couple other videos out on it! Heading out right now! I’ve been going out several times a week.

@@twenty7squared going to have to look for those videos. Just a few other questions, what's the longest period of time you've had it in the water, and have you noticed taking any water on in the hulls, and if so, were they easy to drain? -Thanks-

@@robhilgert1550 Hey Rob, every time I’ve gone out on it it has been for several hours. Haven’t had any issues with taking on water. And back of the boat has to drain plugs and it has a bilge pump.

Depends how tall your garage opening is. I had to take the Bimini off to get it in my garage.

Not a ton. I think roughly 1700-ish pounds for the compact. Little over 2000lbs with the trailer.

Technically it’s about 200lbs over limit. The Jeep motor is more than sufficient for the weight. It’s more so the short wheel base you need to be cautious about. Harder to stop with too much weight. It pulls just fine. I am just careful to be sure to give sufficient stopping space. Not saying I recommend it, but I haven’t had any issues pulling the weight. I wouldn’t go anything higher or bigger though.

Thank you for your reply. I have a 2018 Hyundai Tucon with a 2,000 lb limit. It's interesting that in Australia, the exact motor/trans combination that I have has a 3500 lb towing capacity.

@@miketony8152 yeah my Jeep and the 4dr version have the same engine and everything. The only difference is the shorter wheel base and that is the reason they have a lower tow weight. It can pull it just fine.

Definitely!

5 people.

AirMax 90 x UNDFTD colab!

Shift? I haven’t had any issues at all while going full throttle.

Yes technically it’s about 200lbs over limit. The Jeep motor is more than sufficient for the weight. It’s more so the short wheel base you need to be cautious about. Harder to stop with too much weight. It pulls just fine. I am just careful to be sure to give sufficient stopping space. Not saying I recommend it, but I haven’t had any issues pulling the weight. I wouldn’t go anything higher or bigger though.

Sea-Doo.com -- they start around $17k and go up from there depending on the model you choose and add ons.

It’s not. There are two. One on the bottom right and one on the bottom left.

Please let me know how you like after you take it on the water looking into buying one myself.

@@Mikemacc401 I love it! Took it out the day after I got it. I’m going to upload a video out on the water this weekend!

They’re UV protected material. Commonly used for a lot of outdoor items. Very least you replace them if need be. They are individual panels that you can remove and replace.

do you see many skidoo's faded?

@@robhilgert1550 Skidoo's? Never seen a Skidoo with clear vinyl sides. Have you?

They start at like $18k. I loaded mine up. I paid $28k after everything. Tax. Delivery. Out the door.

@@twenty7squared thank you

@@vspd303 it’s a great boat. I love it. A lot of fun.

@@twenty7squared You got a great deal. The price has gone up to around $4K for 2023.

Ha ok.

Awe did BRP hurt someone’s feelings?! Everyone loves this boat. Every time I’m out everyone asks about it and compliments it. But hey, carry on!

@@twenty7squared no as a long time boat mechanic i can just pick out over hyped garbage with ease. But hey, seadoo spends a lot on marketing and obviously it worked on you. But hey have fun in your gas guzzling slow, poor handling smooth water boat. Bet its a blast when the real boats all come out to play on the weekend lmaoooo

@@docksidemarine4273 lmaoooo! Man they really hurt you! 😂😂

@@twenty7squared your mad because i dont agree thats all. But hey your channel, your opinions i guess. Gotta get them likes and views to pay the bills lol. Ill get back to fixing boats and leave you alone. Obvioisly you cant seem to grasp the thought somone doesnt love your toy boat. Later!!

@@docksidemarine4273 haha I just don’t understand coming on someone’s page to bash something. If you don’t like it move along. Clearly I do so no need for you to throw shade. It’s pointless. If you actually owned one and had an opinion that would be different. But hey do you!

Thanks for the positivity!

Sea-Doo Sparks use the same material and hold up very well. BRP products are innovative and amazing.

Yeah that was an upgrade option.

Yeah I saw the deposit went up a bunch. But that’ll get applied toward your purchase. It’s a really fun boat!