Draught fans play an important role in thermal power plants by providing critical support to the various process activities related to power generation. Coal-fired thermal power plants systems use several types of process fans. Based on the size of the boiler or steamer the rating of the fan used differs and based on the type of air flow and the process involved different types of draught fans are used in thermal power plants. An attempt is being made to explain the types of draught fans used in thermal power plants in an easy to understand format in this article.
Draught Fans and Their Usage in Thermal Power Plants
Draught fans are a type of industrial process fans and are broadly divided into two types - Forced Draft (FD Fan) and Induced Draft (ID Fan). The primary difference between a forced draft and induced draft is, FD fan forces outside air into the heating system whereas ID fan draws flue gases from the system out into the atmosphere. Both FD fan & ID fan operate in such a way that it balances the air system in the thermal plant to make the combustion process efficient. Further details of the FD and ID Fans are provided to the end of this article.
Draught fans are extensively used in thermal power plants for performing the various process activities like supplying the pulverized coal and air mixture for combustion, regulating the combustion, super heating the steam, preheating the air, sending the flue gases into the combustion chamber to reduce pollutants or drawing out the flue gases from combustion chamber to the chimney.
Primary Air Fans or PA Fans
A key component of the thermal power generation plant is the boiler, which is also called as steam generator. The essence of the thermal power generation plant is to create the steam in boilers or steamers, this steam is send at high pressure to a stationary turbine that generates electricity. The coal is first crushed into minute particles using equipment called pulverizers. The main function of the Primary air fan or PA fan is to carry the pulverized coal to the furnace as fuel for combustion. This process is used to create the steam that is the primary process in the thermal power plant. In power plants, the PA fans supply air for conveying of the pulverized coal from coal mills to the furnace area. These primary air fans produce a high pressure to push the coal and air mixture through pulverizer into the furnace. The most common configuration of the draught fans used as a PA fan is the backward curved centrifugal fan. In power plants the PA fans play an important role in supplying air necessary for fuel combustion and in the maintenance of furnace temperature.
Secondary Fans or SA Fans
The secondary fans (SA fans) play an important supporting role in power plants. The secondary fan allows for complete combustion of the fuel inside the furnace. As and when required the SA fan is used to increase the air flow to improve the efficiency and avoid wastage of fuel. Coal based thermal plants share of electricity generation is highest compared to other methods like hydroelectric, wind, gas or solar based plants. Further, this can be run continuously. Coal is mined at one location and then sufficient water and land is required for the power plant. Considering the cost of transport and high costs of coal mining, it would not be right to do inefficient burning of the coal in the furnace. Considering all these facts, secondary fans play a key role is maintaining the efficiency of the thermal power plant is very
more videos
for FITTER, TURNER, WELDER, MACHINIST THEORY IMPORTANT TROPICS
• Fitter theory and MCQ ...
for BOILER OPERATION AND BOE EXAM PREPARATION
• BOILER Operations And ...