Tamiya 1/48 F-16CJ Build Part 2

No video

Tamiya 1/48 F-16CJ Build Part 2

Рет қаралды 12,535

2 жыл бұрын

In this exciting episode, I build the receptacle for my rod in the rear end of the exhaust and then I get to painting.
here's a link to a website I often use to find mixes for Tamiya paints:
www.ipmsdayton....

Пікірлер: 62

@joelhiggins6156 2 жыл бұрын

I’m gonna give that sip a 9/10 on the sip - o - meter, that was pretty epic. I come for the intro, I stay for the modeling.

@jamesvozar1 2 жыл бұрын

haha :)

@jamesvozar1 2 жыл бұрын

I agree, solid execution, no spill over the side. 8.5/10 from me. :)

@seanerk5kt9 2 жыл бұрын

Lol

@paulmoore5401 2 жыл бұрын

Building this model now …. Wish I watched your video before I started. I learn a lot from your videos. Thanks!

@Rob-tq5ym 2 жыл бұрын

slurp,slurp. keep winding them up m8. great insightful vid.its comming along nicely

@themajesticmagnificent8561 2 жыл бұрын

I’m really glad that you showed us how to make a stand..Your stands are the best.!..Also I have the same Tamiya F-16CJ,so this video is a double win..!✌️😎👍 The Salt method really gave results..I learn so much here.Thank you again..Take care and all the best from Blighty.🇬🇧🇺🇸👍

@matk4731 2 жыл бұрын

That cuppa ☕️ looked good at the start Thanks for showing the rod insertion process 😜. The paint looks great as usual. Thanks for sharing 👍🏻👍🏻🙃🙃

@paulmoore5401 2 жыл бұрын

Very interesting. Thank you. You make it look so easy. No trepidation as I would think, “Am I about to ruin all my other painting work?”

@nackdibby7960 2 жыл бұрын

This just keeps getting better every time I watch it! Now I have an F-16 in the shopping cart and wasn’t even ready for it yet!😅

@aidesbnlee5422 Жыл бұрын

Me too, I am afraid that i may screw it

@doubleheadedeagle6769 2 жыл бұрын

I like that spray booth mate. Looks convenient.

@burntelmtoo 2 жыл бұрын

Sea salt, I tend to go straight to the Margarita technique! Looking good! ;)

@dietermuller8625 2 жыл бұрын

The Camo looks reeeaaly good!!😀

@TheBearScaleModels 2 жыл бұрын

that start scene with the UBER sip of coffee !! awesome bro !! but the base stuff is really useful... aircraft look awesome posed clean in flight.. im really keen to try this on some my builds next year.

@henrysanchez4810 2 жыл бұрын

Finshed that kit last month came out good.

@bobdyer422 2 жыл бұрын

I was a little on the fence with the salt technique, but after the wash off - suttle & yet effective. Looks good!

@MisterGsWorkbench 2 жыл бұрын

I always like the salt technique - works great on gray stuff. One of these days I'll build up the courage to stick acrylic rod in one of my planes...

@avion34 2 жыл бұрын

Looking excellent so far! I think I am going to have to give that salt technique a try sometime. Thanks for the tutorial on how you do it.

@madazza72 2 жыл бұрын

Only new to your channel and absolutely love the content keep up the great work

@user-vi7we4pk8v 2 жыл бұрын

amazing job as always ..keep going !!!

@nackdibby7960 2 жыл бұрын

Wish I had this type of artistic mind! It would take me months to engineer a stand like this! Let’s not talk about the model itself!

@the-primered-thumb 2 жыл бұрын

Another fantastic build mate 😉👌

@davidbarrientosargueta6135 2 жыл бұрын

Muy buena técnica!!! Consulta está técnica no se debería de aplicarla después de las calcas para que tengan el mismo efecto, creo yo que las calcas quedarían muy nuevas no integradas al modeló, es solo una sugerencia! Saludos desde Guatemala

@hookahguy 2 жыл бұрын

Awesome work! Can’t believe you have any thumbs down.

@seananthonyegan3395 2 жыл бұрын

Great Sipping and Excellent Waving 👌

@waynesbutler7834 2 жыл бұрын

Great to see you well on the way to creating another fantastic build . I have done the salt technique a few times and I always seem to get better results with sea salt instead of table salt but i dont have your skill set ..

@karlosmitz3027 2 жыл бұрын

That link is amazing 🤩. Thank you so much 😊

@seanerk5kt9 2 жыл бұрын

Its invaluable for those of us that use Tamiya paints

@yellowcake1320 2 жыл бұрын

Looks lovely..... can't wait to see the deck ulls

@seanerk5kt9 2 жыл бұрын

I think you mean stickers

@ytwos1 2 жыл бұрын

Wow, that salt weathering looks extremely good imho.

@jerryguerena1983 2 жыл бұрын

Hey Francis how did you like that SLURP!! lmao ✊🏽😝👍☕️ please don’t ever conform to what people think you shouldn’t do. Keep banging out them models, and slurp-on!! You motivate me to keep building as well, thank you bro!!!🙏😎

@seanerk5kt9 2 жыл бұрын

Lol. I don’t bend the knee. I’m glad I can be a source of motivation for you my friend

@Bryan-cs9to 2 жыл бұрын

Looking Good!!!

@RobertSmith-wm6jm 2 жыл бұрын

With the Salt technique, did you clear coat before or did you apply it straight on the paint? Looks great !!

@seanerk5kt9 2 жыл бұрын

Straight on the paint

@Mikeyb37184 2 жыл бұрын

howdy boss

@nozomi911 2 жыл бұрын

are you dere b0ss?

@woodybear8298 2 жыл бұрын

What is the blue-hinged thing in the lower left? Beautiful build.

@seanerk5kt9 2 жыл бұрын

It holds my iPhone

@soonermodels1173 Жыл бұрын

That link will not open

@rebelroostermodeling6460 2 жыл бұрын

What’s a good temperature for a heat gun to bend those rods? Or maybe which gun are you using?

@seanerk5kt9 2 жыл бұрын

Ive just got a cheap one from Walmart that doesn’t have a temp gauge…just a low and high setting. I just slowly heat it up until it starts to bend from its own weight then I start to bend it to shape. I demonstrate it in my video on how to make a display base.

@KyleSchwanz Жыл бұрын

There are way to many spots for the ol “that’s what she said” joke to be inserted in this video 😂😂😂

@allard1136 2 жыл бұрын

Great video! Did you put a clear coat on before you put the water and salt on?

@seanerk5kt9 2 жыл бұрын

No, just directly over the tamiya paint

@richardroberts6101 2 жыл бұрын

I am thinking of buying this kit, you mentioned some issues with the kit can you say what you found please. Thank you

@seanerk5kt9 2 жыл бұрын

The seam lines in the canopy, the over complicated intakes and although the fit is pretty good, it’s not nearly as good as Tamiyas f-14 and f-4

@drew9808 2 жыл бұрын

hey, ever tried setting a magnet or peice of iron inside the model during asembly ? no holes. just attach to a magnet on stand. done it many times.

@seanerk5kt9 2 жыл бұрын

I did that on a ship model once…I found it easy to knock off though

@drew9808 2 жыл бұрын

i get it. ive been using your mag ordnance tehniques . i added to doing 72 scale with magnetic stands. i use a 3/4 dia x 1/4 mag. really strong. just epoxy or ive used 3m vhb dub tape recently inside the fuse. it works good on the tomcats. glue a mag in the for and aft of the center missel groove. use some 1/8 or 3/16 steel rod for the stand . i have 2 1/32 revell cats that way you'll need to do some welding or bending. It also allows for some possability of banking . i could make them

@ricknesbitt5949 Жыл бұрын

I went to the website in the description and my tablet said forbidden. What’s up?

@seanerk5kt9 Жыл бұрын

I noticed that webpage went offline a few months ago. Here’s a new page that I’ve been using www.aerohistorians.org/Other/Tamiya_paint_mixes_4-17.pdf

@phantomTomcat1985 2 жыл бұрын

Did you use Mix 1 for the 36270? It seems MSG might be a bit warm for it straight

@seanerk5kt9 2 жыл бұрын

I don’t remember as I mixed it a while ago. I use the mix recipes to get me in the ballpark and adjust based on what I think looks good. In order to get an exact match to an FS color, you would need a physical sample of it to match your mix up with (im guessing that there were probably also slight variations in color between FS paint batches. I also keep in mind that the paint color of a real plane is going to change over time based on exposure to sun, dirt, weather conditions etc and therefore I take that into consideration as well. The bottom line is do what you think looks right to you;)