Cardboard Iron Man Helmet That OPENS! DIY No Electronics

Рет қаралды 7,053,086

3 жыл бұрын

Install Raid for Free ✅ IOS/ANDROID/PC: clcr.me/SeansCrafts and get a special starter pack 💥 Available only for the next 30 days
Support me on Patreon here: / seanscrafts
Iron Man helmet template by DaliLomo DIY: dali-lomo.blogspot.com/2019/0...
How to print the template:
1. Download Adobe Acrobat Reader here (for free): acrobat.adobe.com/us/en/acrob...
2. Right click on the template, then click "Open With" and "Adobe Acrobat Reader DC"
3. Click the printer icon at the top left
4. Under "Page Sizing & Handling", click "Poster", then change the "Overlap" to "0 in"
5. Set the "Tile Scale" to 100% or larger or smaller depending on your head size. DaliLomo DIY has a blog post about how to resize his template to accommodate your head size which you can find here: dali-lomo.blogspot.com/p/head...
6. Click "Page Setup..." and specify what type of paper you are using (US Letter for example) before printing
Materials:
paperboard (AKA cereal box cardboard)
Dupli-Color Perfect Match Inferno Red spray paint: amzn.to/3rZwBrE
Dupli-Color Perfect Match Sunburst Gold spray paint: amzn.to/3twojb8
Dupli-Color Perfect Match filler primer: amzn.to/3qSVl3v
corrugated cardboard: amzn.to/2NBAP6i
binder board: amzn.to/3sfwQ1h
8x5mm neodymium magnets: amzn.to/34hvfhV
super glue: amzn.to/2xSssPq
hot glue gun: amzn.to/3kjUx5F
resin: amzn.to/2NOAaBy
floor mat foam: amzn.to/2NkoNSl
sponge: amzn.to/3aFVjH4
metal wire coat hanger: amzn.to/2MbubX8
white perforated vinyl: amzn.to/2TAEqUU
bamboo skewer: amzn.to/2A6CzAL
rubber bands: amzn.to/3mmWI8f
sandpaper: amzn.to/3pEAOPh
wood filler: amzn.to/35GU5rz
craft foam: amzn.to/30PFdGw
craft knife: amzn.to/3fzVcO0
replacement knife blades: amzn.to/3eUIgBw
cutting mat: amzn.to/2ZxGqjo
Film equipment I'm currently using:
cameras: amzn.to/2SiHLI2
amzn.to/2UQVwij
lenses: amzn.to/3fa4ccv
amzn.to/2Wcwzhq
amzn.to/3ic0504
amzn.to/2Yklo90
microphone: amzn.to/3et9YFn
tripods: amzn.to/2qYbk6Y
amzn.to/2HMRmou
amzn.to/3FWOHBy
lighting: amzn.to/2ETC2Ve
Music:
Blues or Something like That - Tigerblood: www.epidemicsound.com/referra...
Don't Wanna Be Dead Anymore (Instrumental Version) - Coma Svensson: www.epidemicsound.com/referra...
In My Time - Shiver Disk: www.epidemicsound.com/referra...
Holding on to Suspense - The Grateful 7: www.epidemicsound.com/referra...
Someone I'll Never Be - The Grateful 7: www.epidemicsound.com/referra...
Out and About - Harper Rey: www.epidemicsound.com/referra...
Just Say When - The Grateful 7: www.epidemicsound.com/referra...
DISCLAIMER:
This description contains affiliate links, meaning if you purchase something using those links, I will receive a small commission. The links do not cost you anything extra at all, but clicking on them to buy something helps out the channel!

Пікірлер: 5 500

@seanscrafts 3 жыл бұрын

Install Raid for Free ✅ IOS/ANDROID/PC: clcr.me/SeansCrafts and get a special starter pack 💥 Available only for the next 30 days Support me on Patreon here: www.patreon.com/seanscrafts Iron Man helmet templates by DaliLomo DIY: dali-lomo.blogspot.com/2019/09/iron-man-mk4-retractable-back-piece-for.html How to print the template: 1. Download Adobe Acrobat Reader here (for free): acrobat.adobe.com/us/en/acrobat/pdf-reader.html 2. Right click on the template, then click "Open With" and "Adobe Acrobat Reader DC" 3. Click the printer icon at the top left 4. Under "Page Sizing & Handling", click "Poster", then change the "Overlap" to "0 in" 5. Set the "Tile Scale" to 100% or larger or smaller depending on your head size. DaliLomo DIY has a blog post about how to resize his template to accommodate your head size which you can find here: dali-lomo.blogspot.com/p/head-measurements.html 6. Click "Page Setup..." and specify what type of paper you are using (US Letter for example) before printing Materials: paperboard (AKA cereal box cardboard) Dupli-Color Perfect Match Inferno Red spray paint: amzn.to/3rZwBrE Dupli-Color Perfect Match Sunburst Gold spray paint: amzn.to/3twojb8 Dupli-Color Perfect Match Scratch filler primer: amzn.to/3qSVl3v corrugated cardboard: amzn.to/2NBAP6i binder board: amzn.to/2O6IwFm 8x5mm neodymium magnets: amzn.to/34hvfhV super glue: amzn.to/2xSssPq hot glue gun: amzn.to/3kjUx5F resin: amzn.to/2NOAaBy floor mat foam: amzn.to/2NkoNSl sponge: amzn.to/3aFVjH4 metal wire coat hanger: amzn.to/2MbubX8 white perforated vinyl: amzn.to/2TAEqUU bamboo skewer: amzn.to/2A6CzAL rubber bands: amzn.to/3mmWI8f sandpaper: amzn.to/3pEAOPh wood filler: amzn.to/35GU5rz craft foam: amzn.to/30PFdGw craft knife: amzn.to/3fzVcO0 replacement knife blades: amzn.to/3eUIgBw cutting mat: amzn.to/2ZxGqjo DISCLAIMER: This comment contains affiliate links, meaning if you purchase something using those links, I will receive a small commission. The links do not cost you anything extra at all, but clicking on them to buy something helps out the channel!

@kaithedoggogamer1085 3 жыл бұрын

Second

@maitreyeeghosh7460 3 жыл бұрын

Please make a benten's watch

@jabread713 3 жыл бұрын

can you please do a cardboard beyblade?

@mariasuziana5684 3 жыл бұрын

Yeay i love your craft i love it

@vakulchandrabose8550 3 жыл бұрын

Make a scarlett web shooter

@LeoRyori 3 жыл бұрын

From Sean's Crafts to Sean's Industries real quick

@kidYT514 3 жыл бұрын

Idk if this is a good comment but atleast pls read it. I really want 1k subscribers. I have made tons of vids trying to make good content and everything but I never get anything. If I wanted to say... I am the most unluckiest kid ever. If I ever get 1k subscribers, I will be proud and try making better content. SO I encourage everyone to pls subscribe to my channel! P:S If u sub to mine I swear I will sub to yours. Anyways, I subbed to u Sean's Crafts! Thanks guys! PLS HELP ME GET TO 1k! :) By the way if u sub, comment it in my channel trailer!

@subwaysurfers8521 3 жыл бұрын

@@kidYT514 bot

@datboi9316 3 жыл бұрын

kzfaq.info/love/cs0xQQc7AS5HnkmAKQbzfQ Subs this guy instead lol He tried harder and he started 5 year ago and only have 37 as his subscribers

@moonwalkerkop4479 3 жыл бұрын

@@kidYT514 Bot

@mdunity1018 3 жыл бұрын

@@kidYT514 i subbed, just keep at it and I'm sure you'll get 1k. Good luck dude

@ImYowawerts 3 жыл бұрын

THIS IS THE BEST DIY IRONMAN HELMET TUTORIAL ON KZfaq! 💯🔥🤘💙

@ImYowawerts 3 жыл бұрын

P.S. loved the acting at 18:55

@kamalhossain4731 3 жыл бұрын

Hey yowawerts i am your regula viwer

@ImYowawerts 3 жыл бұрын

@@kamalhossain4731 Hi 😊 Nice to see you here!

@datboi9316 3 жыл бұрын

@@ImYowawerts hi there im your regualar commenter and Og viewer

@lucask.5620 3 жыл бұрын

AHHH HI YOWAWERTS! You know your style and Sean's style of making things are pretty similar using cardboard and all that stuff!!!

@hamzaismail9901 Жыл бұрын

I don't know what to say. This freakin legend could probably build a whole functioning space station for nasa out of cardboard. You are such a blessing to young and old aspiring engineers and crafters and there wouldn't be a reason to not love this guy. You deserve all the subs in the world.

@MotiviqueStudio Жыл бұрын

Fantastic. I am not a cosplayer, but I have a two year old and want to make stuff for him. Your process for getting the board looking smooth was what I needed. Thank you.

@TheWeeklyBrik 3 жыл бұрын

Man, in a year I won't be suprised if he makes a fully functioning cardboard Iron Man suit! Great video :)

@silbestardungdung4931 3 жыл бұрын

Yes

@Mr.minecraft 3 жыл бұрын

Yup

@moonwalkerkop4479 3 жыл бұрын

Yep

@Mr.minecraft 3 жыл бұрын

Bet

@Mr.minecraft 3 жыл бұрын

Yeup

@cubingshorts9822 3 жыл бұрын

Can we appreciate the fact that he NEVER clickbaits

@witali2909 3 жыл бұрын

True

@user-fn1sh2nl9d 10 ай бұрын

They way you introduced the sponsor actually made me listen instead of “NoW IntO tOdaYS SponSOR” thank you for that😊

@pepe_the_frog713 Жыл бұрын

GUYS!!! if u want the helmet to fit PERFECTLY, DON'T set the tile scale to 100. to measure the tile scale, take the diameter of ur head in milimeters, divide that by 160 and multiply that by 100. THAT is what your tile scale setting should be. Sean told this in one of his spiderman mask videos and hope that this comment helped a few people at least

@Sager_Gamer 7 ай бұрын

Is there anyway to do this if you don't have Adobe acrobat?

@pepe_the_frog713 7 ай бұрын

@@Sager_Gamer not really. Adobe Acrobat is there so that you can split the print across multiple pages and have it fit to your head. If you print it on one page, its gonna be smaller since it has to be cramped up into one spot and it wont really fit.

@mrverse99 6 ай бұрын

@@Sager_Gamer there is, i was able to do it with foxit reader but because my head is just insanely big i had to modify some of the templates and make them wider

@supermovieclips7966 3 жыл бұрын

I have seen many diy iron man helmets in KZfaq but this is the best.

@darcepower9544 3 жыл бұрын

19:49 no sir, thank YOU for making me want to make this.

@timk.3286 3 жыл бұрын

same, he makes it look so easy

@animatedvidandmusic3080 2 жыл бұрын

I have subscribed to you my guy

@kimberlybondy7047 Жыл бұрын

Love that you use cardboard and other thing a lot of people would already own. It reminds me of when I was a kid and used to make everything out of card board but at some point through adulthood you feel like you need to upgrade your materials in order to make quality things. That’s definitely not necessary weather its card board or 3d printed they both will take a lot of time but look great!

@rubberduck306 8 ай бұрын

For a cardboard build that looks INCREDIBLE!! Fantastic work 👍

@Brick_Science 3 жыл бұрын

Gorgeous Helmet design!

@swarajtilekar3836 11 ай бұрын

@user-ye4ou3ql3d 11 ай бұрын

@swarajtilekar3836 11 ай бұрын

@@user-ye4ou3ql3d ok

@zaidiatoranimation3947 11 ай бұрын

@swarajtilekar3836 11 ай бұрын

@@zaidiatoranimation3947 ok

@morganpreddy3941 2 жыл бұрын

Dude, this is incredible. I absolutely love how you use simple mechanisms instead of the fancy electronics that most people, including myself, can never understand. All I can say is thank you for this amazing content.

@arixgamingxxx 2 жыл бұрын

Now I want to make a DIY

@arixgamingxxx 2 жыл бұрын

Hehe

@josephb8499 2 жыл бұрын

Facts. Recently found his channel. And I’m seriously considering doing everything he’s made. All with time ofc. But this iron man helmet and the web shooters and caps shield are definitely a must.

@bUildYT Жыл бұрын

So true, amazing what hes doing, because of him i atemted making masks on my own, u like my black panther 2 mask? :)

@ibrahimandhibashow453 11 ай бұрын

Bro how to close this helmet 😊

@om_yoga_mum8687 2 жыл бұрын

Can we appreciate all the hard work Sean does for us!

@clipiboi Жыл бұрын

no🤣

@clipiboi Жыл бұрын

jk yes

@Skoopa92 8 ай бұрын

This is amazing, I was about to dive into the fancy electronics to make my iron man mask open but then I found this, I'm gonna incorporate your mechanism into my 3D printed helmet :D this also makes me want to get back into templates and EVA foam work ahh

@RonaldFinger 3 жыл бұрын

Wow, didn’t expect to see myself when I clicked on this haha. Great work man!

@spidey530 3 жыл бұрын

yea lol

@natkrasnova9536 3 жыл бұрын

Yeah mega lol

@tiknekplay1106 2 жыл бұрын

@pacesplace 2 жыл бұрын

Wdym?

@erofeev001 2 жыл бұрын

Hi! I recommend you to watch tis video about DIY iron man head! m.kzfaq.info/get/bejne/aNGadLhinLeUe2Q.html

@bullymaguire_005 3 жыл бұрын

*"Kid!! You're an Avenger now"*

@coolplushstailsplush2830 3 жыл бұрын

I have a black and white spider man symbiote costume from Amazon and I have a homemade one I made am I avenger

@bullymaguire_005 3 жыл бұрын

@@coolplushstailsplush2830 good

@coolplushstailsplush2830 3 жыл бұрын

@@bullymaguire_005 but am I an avenger

@handysoap 3 жыл бұрын

@@coolplushstailsplush2830 no

@rohnishpaularts843 3 жыл бұрын

Hello

@ultraunboxing1469 Жыл бұрын

Who needs CGI? Sean's crafts are just as good.

@michellegreen2428 Жыл бұрын

Brilliant work 👍.I love how you go step by step and it tells me what you use for the creation! Great job and my favourite one is the captain America shield.I would love to see you build a captain America helmet!

@TristanMaker 3 жыл бұрын

Duuude, that is amazing! It looks as good as a 3d print, and the mecanism for the faceplate is really clever! Great job, I can't wait to see what you make next!! :)

@seanscrafts 3 жыл бұрын

Thank you so much Tristan! 😀

@kidYT514 3 жыл бұрын

@@seanscrafts Idk if this is a good comment but atleast pls read it. I really want 1k subscribers. I have made tons of vids trying to make good content and everything but I never get anything. If I wanted to say... I am the most unluckiest kid ever. If I ever get 1k subscribers, I will be proud and try making better content. SO I encourage everyone to pls subscribe to my channel! P:S If u sub to mine I swear I will sub to yours. Anyways, I subbed to u Sean's Crafts! Thanks guys! PLS HELP ME GET TO 1k! :) By the way if u sub, comment it in my channel trailer!

@subwaysurfers8521 3 жыл бұрын

@@kidYT514 bot

@Fw.Vertigo 2 жыл бұрын

@RKStreak same all i got was hate but just keep going

@mr.senpai4679 2 жыл бұрын

@@Fw.Vertigo difference is this guy is a bot don't let it fool you he's copy pasting his comment everywhere in order to get subs it's a mind trick

@welshlad5146 3 жыл бұрын

I love your videos because you make things accessible for the average person, that don’t have access to servos and motors

@eisenmail Жыл бұрын

Really. This is the Best craft video of Iron Man Helmet that I ever seen on Internet. Easy build and easy open mechanism. Congratulations!!

@dannychen4288 2 жыл бұрын

0:49 "Many talented ppl..." You are one of them

@jayantiyumnam1987 3 жыл бұрын

Make Falcon's foldable wings and jetpack

@jayantiyumnam1987 3 жыл бұрын

Please make this

@salmaanplayz7389 3 жыл бұрын

thats probably not real

@asiananims4263 3 жыл бұрын

that seems so demanding lol

@ashwinirudraksha2402 3 жыл бұрын

Yes I also want that

@brandonscurville6189 3 жыл бұрын

Yeah please make this Sean

@taxman121 2 жыл бұрын

Just made this. A heads up to everyone….it takes a lot of time to achieve this quality. Be prepared to spend over a week making everything perfect.

@the_art_master2883 2 жыл бұрын

Thanks for the heads up dude

@hegrye 2 жыл бұрын

Sounds perfect, Australia’s summer holidays are about to begin and I need something to do

@origamigamer1691 Жыл бұрын

Dude, what you do is incredible! Keep up the great work!

@user-yc2pe5sb7y 4 ай бұрын

I need to watch this 2-3 times . Great work Sean

@alif3119 3 жыл бұрын

I can’t stop watching I’ve watched this 6 times since yesterday

@justinharrison9839 3 жыл бұрын

I have watched nonstop myself

@Frizzr_7 2 жыл бұрын

ikr

@erofeev001 2 жыл бұрын

Hi! I recommend you to watch tis video about DIY iron man head! m.kzfaq.info/get/bejne/aNGadLhinLeUe2Q.html

@Dream-po7ud 2 жыл бұрын

Same

@thejulescreations 3 жыл бұрын

“Hey whats up Sean here and this…. is my Iron Man helmet that i built in a cave with a box of scraps”

@Nobody.1888 3 жыл бұрын

Hahaha

@rajeshvashishtha4058 2 жыл бұрын

This is fantastic dude !! Can you plz also make the whole suite 🙏

@marvelmania3280 Жыл бұрын

Me and my dad love marvel and DIY it’s incredible doing them both combined with eachother!

@hdfx7817 3 жыл бұрын

Sean: exists Superglue:your NOTHING without me!

@dominictoretto8859 3 жыл бұрын

Cardboard: if he's nothing without superglue then he shouldn't have superglue Sean: what? Cardboard: I'm taking the superglue away

@quad8199 2 жыл бұрын

@@dominictoretto8859 nice reference. XD

@michaeltieng5393 2 жыл бұрын

Hot glue: damn bro you gotta do me dirty..

@pacesplace 2 жыл бұрын

MCU: amateurs

@mateovillacarlos1978 2 жыл бұрын

KZfaq: Sean wouldn't be known without me even you super glue and cardboard you both wouldn't be Sean's best friend without me!!!.

@oubied5243 3 жыл бұрын

First : Spider-Man Web Shooters And Helmet NOW : Iron Man Helmet That Open Next : Thor Mjölnir That You Throw And Come Back 😁👍

@bladeoftheruinedking2543 3 жыл бұрын

He could make that

@bladeoftheruinedking2543 3 жыл бұрын

Using similar mechanics to spiderman retractable Web shooter

@yuvalmaharshak5566 3 жыл бұрын

@@bladeoftheruinedking2543 if he make the muilneer super light

@bladeoftheruinedking2543 3 жыл бұрын

@@yuvalmaharshak5566 or he could make the strings tensile strength stronger

@sankalpachowdhuryclass9b308 3 жыл бұрын

@@bladeoftheruinedking2543 or he could make the hammer head hollow and light only to be filled with a drone and the attach the handle for some balance and then bring it back to him by controlling it with the remote control.

@matttherobloxgamer4184 2 жыл бұрын

You make a lot of people happy with your crafts

@cyjpad0704 2 жыл бұрын

I cant beleive how good it looks! good work

@origamikira 2 жыл бұрын

you probably already know this but you could also use EVA foam for this, its pretty much the same as cardboard, different thickness, easy to work with using a cutter/xacto knife and can be primed, painted and i think its more durable than cardboard, im pretty sure you can also coat it with resin if you want to, maybe you'll do a build in the future using foam just to try it out, cheers and keep up the good work

@ivonnepineiro9190 Жыл бұрын

sean

@bigfrankman 3 жыл бұрын

I like your videos not only because they are easy to follow and the results look incredible, but also because other videos I've seen make the process of building the prop look so easy and flawless, and thats what discourages me, but your videos are very real and relatable.

@SamiaKaidi 2 жыл бұрын

I made also a cardboard helmet following your and Dali lomo’s tutorial

@Hrhrudhsoaihdjdi Жыл бұрын

15:39 Ahhh yes, the fresh smell of magents and metal. I love it!

@bUildYT Жыл бұрын

Haha yea, I used magnets on my black panthet 2 mask too, u like it as well?

@dante-baldini 3 жыл бұрын

16:52 Wow! this looks like it's 3d printed! Great job!

@JCinLapel 3 жыл бұрын

You are now going to be a true super hero to my 5 year old nephew. I am a tabletop crafter and this be my first try at cosplay stuff for his 5th birthday.

@michaeltieng5393 2 жыл бұрын

You are legit the best uncle!!

@laminate31 6 ай бұрын

Thank you Sean for making this video back then when I first got it in my recommended I really wanted to make something like this great helmet but now two years later I’m a cosplayer and if I never saw this it would have nver happened this is the best hobby I have and all because of this one video

@someswarpatra452 2 жыл бұрын

I have decided to make this Iron Man helmet after my all Annual Exams get over and I will send pictures and a video of my helmet to you Sean's Craft.

@Paper_Cuts 3 жыл бұрын

The slight flex of using AirPod boxes for the ears is amazing

@kidYT514 3 жыл бұрын

@subwaysurfers8521 3 жыл бұрын

@@kidYT514 bot

@corlimations5841 3 жыл бұрын

Love how the bottom goes down,nice little touch

@BrickyMPG Жыл бұрын

Sean crafts in 2033 be like: I made a working mark 85 suit from cardboard!

@patman2356 3 ай бұрын

You make this look so easy!

@rngbandit1448 3 жыл бұрын

Make a Thor’s hammer that comes back when you throw it Edit: everyone is replying saying you can't, I have a reply on this that tells you exactly how to do it.

@lpspando3080 3 жыл бұрын

YESSSS SUCH A GOOD IDEA

@MAmmar-uw7gn 3 жыл бұрын

Boomerang with Thor style?

@Vivekkumar-vp9tp 3 жыл бұрын

😂

@Vivekkumar-vp9tp 3 жыл бұрын

@Justin Delos Santos may be nothing is impossible

@scope846 3 жыл бұрын

impossible you would need a massive 100 pound magnet i would not carry that around

@punnaiahjonnalagadda5777 3 жыл бұрын

Sean: makes craft Subscriber: makes people feel to see the video of Sean

@OrigamiAndHardWork 3 жыл бұрын

yeah yeah

@sammysamsam2992 7 ай бұрын

This is exactly what I need right now, thank you. My 7-year-old son gave me the impossible project request, an ironman helmet made of cardboard, but opens up... like how??? so THANK YOU!

@ragonez4101 2 жыл бұрын

Love how you used airpod boxes for the ear piece

@methminkumarapeli2194 3 жыл бұрын

Oh noo Raid shadow legends got him too

@kidYT514 3 жыл бұрын

@Frizzr_7 2 жыл бұрын

16:50 am i the only one that LOVES this design

@appatheskybison2527 2 жыл бұрын

I'm with you

@miguelrivera9541 2 жыл бұрын

me too

@bataparancsnok9646 Жыл бұрын

JUST WHAT I NEEDED! THANKYOU MAN!

@some1on_yt 4 ай бұрын

"pretty cool in my opinion"- best quote of 2022

@bhower02 2 жыл бұрын

Thank you for taking the time to post this. some people dont really know how hard it is to record and build.

@fronk572 3 жыл бұрын

You are the only "crafts" person on youtube that is not corny and your stuff that you make is cool an durable 👌

@justinka12 3 жыл бұрын

make 2099 web shooter

@Mevdine 3 жыл бұрын

check my channel bro , u did not see people that doesnt mean people dont exist

@kohenlau 3 жыл бұрын

True

@robertringo4855 2 жыл бұрын

YOU ARE THE CARDBOARD KING GOOD JOB!

@dracenstein5556 2 жыл бұрын

That end scene EPIC! You’re a craftsman more worthy than you give yourself credit for ,you are very talented .

@lenademarco3558 3 жыл бұрын

am i the only one that finds his voice relaxing or am I weird

@noasangha7249 2 жыл бұрын

no bro it is lol

@justgustian4899 2 жыл бұрын

Yes you are lol

@Isohnin 3 жыл бұрын

"You're an Avengers, Sean." *"I'm a What?"* "your an Avengers"

@standincomedy3827 3 жыл бұрын

And a thumpin good one

@chills32 Жыл бұрын

Great video! So many cool techniques. My kiddo and I are making this mask and are ready to paint....soooo cool. Thank you for the inspiration.

@riaztoonz 2 жыл бұрын

You the man of real talents! best wishes from Bangladesh 🇧🇩

@Anims_crafts9377 2 жыл бұрын

I'm from Bangladesh too

@janetbennell9855 2 жыл бұрын

My ten year old grandson and I are enjoying making this. Going well so far. 98% his work, I’m just facilitating and supervising super glue.😀

@ContextG 3 жыл бұрын

Bro, your cardboard projects are off the charts! I've got a list I'm gonna be going through as projects for my son and I. Amazing stuff! 258k subs are too little in my opinion for the kind of awesome build videos you're making. The production, the explanations, the step by step and showing the mistakes that can be easily made by anyone, and then showing the solution. Just genuinely amazing. Got a lifetime subscriber and active watcher!

@seanscrafts 3 жыл бұрын

Wow, great comment! Thank you so much! Cheers 😀

@abhiseknayak5920 2 жыл бұрын

Bibhidjfucihc

@rkrishna4972 2 жыл бұрын

@@abhiseknayak5920shit

@reubenrajnauth6956 2 жыл бұрын

Hi sean

@MaybeCrax 3 ай бұрын

which ty0pe of cardboard? @@seanscrafts

@barbaralinzy8604 Жыл бұрын

I like how he did the civil war skit with Tony and Peter at the end😅

@TheMexicanCat651 Жыл бұрын

my guy has a big brain and the biggest imagination. i love your videos keep it up

@Itz_hameed_shaik 3 жыл бұрын

Tony stark : you need an upgrade 😂😂😂😂😂😂😂

@josephda670 3 жыл бұрын

it is the best iron man helmet

@Itz_hameed_shaik 3 жыл бұрын

@@josephda670 No iam saying about Tony stark Dialoge in civil war with spider man 😀😀😀😀😀😀😂😂😂😂

@Dubs902 2 жыл бұрын

Got pumped when I checked the description and you actually listed everything you use, sadly not many people do anymore 🙏🏻

@kaydensadventureworld1555 Жыл бұрын

When I grow up I want to be the real iron man and when I grow I also want to be like you

@BrickyMPG Жыл бұрын

💀

@charlietrey986 2 ай бұрын

Throwback of the century man

@alettarijpkema8353 2 жыл бұрын

I feel like this is really awesome because you make these things easy for other people and use materials that are easy to find.

@nsikakekanem3359 2 жыл бұрын

Me and my sister are very impressed with how it looks like metal. Keep up the good work sean.

@NWhySeetaxi 2 жыл бұрын

Bro you are the Man.. like the Macgyver of Costumes.. Thanks for all the tips and lessons

@jinwong497 11 ай бұрын

Dude, This is awesome, Great job!

@yazidtamer532 2 жыл бұрын

He does the best DIY stuff on KZfaq

@dr.deadshotyt6824 2 жыл бұрын

You are really a Tony Stark Sean. Great keep it up. Your talent can take you far

@marvelvasi5722 2 жыл бұрын

I will love to try it

@ajstuff5633 7 ай бұрын

These are so good every single thing you do is amazing

@silbestardungdung4931 3 жыл бұрын

IDEA : Make Beyblade stuffs than webshooters

@ayosnip3r 3 жыл бұрын

Yea

@veronicaochoa4899 3 жыл бұрын

Nah Spiderman is the best

@mohamedezeldin8911 3 жыл бұрын

@moonwalkerkop4479 3 жыл бұрын

Nope

@sitagurung4320 3 жыл бұрын

Make iron man arc reactor

@siyaadshafiq1796 3 жыл бұрын

Bro your a genius bro can you make a spider man homecoming spider drone pls bro 🥺

@laurentiuradu9522 3 жыл бұрын

Hard but not imposible

@TheShrimpestest 2 жыл бұрын

I made the arm you made a vid on before and it works so well thx so much!

@bolognabuyer 7 ай бұрын

Bro thanks I'll be making this for my Halloween costume next year!!!

@Stellarx44 3 жыл бұрын

Sean's craft the next hacksmith..

@kidYT514 3 жыл бұрын

@AbominousWorm 3 жыл бұрын

@@kidYT514 yo shut up stop askin for subs

@xxdropdeadxx6679 2 жыл бұрын

This channel like the best way to do it at home budget wise n still look amazing sadly I still wouldn’t do any of it since I ain’t got patience but sure am loving watching this channel now it’s satisfying to watch!

@Dashervr827 11 ай бұрын

That’s badass

@proguy5498 Жыл бұрын

Thank you for giving us this ideas😁

@twotoasty0638 2 жыл бұрын

I love how it’s so simple to make but so awesome and badass at the same time and looks just like the real movie, flawless job dude, Keep it Up💯🔥🔥🔥🔥

@IronMan-jj2fd 2 жыл бұрын

The faceplate actually looks similar to his face especially the eyes 😂 Definitely not movie accurate!

@1982faraway 2 жыл бұрын

For anyone wanting to make this for their kid, I've been trying to get the right size for my 5 year old. Tried printing at 80% and it was too small. Couldn't even put it on my 1 year old daughter's head! 😄 I then tried printing at 90% and it seemed to be ok size for my son's head but he couldn't get the helmet on because the opening is too small. I tried removing quite a bit in the back but it didn't help. So I ended up just printing it at 100%. I can get the helmet on my head if I push my ears in when I put it on. So it'll fit my son's head. If anyone is making this helmet for a younger child, I'd try with something between 95% and 100%. 🙂

@ermanvavassori7435 8 ай бұрын

Yes, I printed it at 100% and the helmet it is ok for my children (5 and 8 years old)! I tried to put it on me but it's too tight (the chin can't get into the helmet)...

@cespadac.0760 8 ай бұрын

bro you are so underated, this was amazing!

@RedwiththeX 21 күн бұрын

Amazing video love all your content, evey video never disappoint

@Jo-vq8zk 2 жыл бұрын

That's amazing! I still can't believe the whole thing is made out of cardboard! Super awesome, love your vids man, keep it up!

@eduardonu3433 3 жыл бұрын

"You've got mad skills!"

@veronicaochoa4899 3 жыл бұрын

Yea

@maximizedindustry4626 3 жыл бұрын

kzfaq.info/get/bejne/i593eshkt9yzY4U.html

@maximizedindustry4626 3 жыл бұрын

Bro checkout my channel

@eduardonu3433 3 жыл бұрын

@@maximizedindustry4626 Nice work with Captain America's shield! I'm also working on one, I just have to finish some painting and it will be done! ;)

@evepaglia1315 2 жыл бұрын

rip iron man, we love you 3000

@Vasco2077 Жыл бұрын

Bro and this guy is even posting for free

@JackFilms1 3 жыл бұрын

Wow, I have been trying to do this for ages but this is the simplest one I have found. Love all your work dude, keep it up!

@simplyhomemaker7611 2 жыл бұрын

This guy is so under rated. I love your tutorials!

@JS.TRIESchess_rubix-cube 8 ай бұрын

“Under rated” the next Camman18

@TheThree100 11 ай бұрын

Hey whats up sean here and this is my fully working spaceship I built mostly using just some cardboard,popsicle sticks, and rubber bands.