SEAT LEON MK3 - How To Remove Headlight Headlamp Removal Replacement 2013-2019

Рет қаралды 30,852

2 жыл бұрын

Guide on how to remove the headlight assembly on a Seat Leon Mk3 (5F), models 2013-2019.
Models years: 2013 / 2014 / 2015 / 2016 / 2017 / 2018 / 2019
The model in the video is an FR model, but the process is the same for all other models including Cupra etc. Also, the headlight on this vehicle is the LED type, but again, the process is the same for halogen, xenon etc. We removed the lower bracket with the headlight, but this can be removed after if required.
Tools used:
-T25 & T30 Torx: amzn.to/2NWrfON
-Flat Screwdriver: amzn.to/3qRPuMn
-10mm Socket: amzn.to/2NWrfON

Пікірлер: 26

@johnloxley8705 Жыл бұрын

Stumbled across this video as I was looking for “ how to remove the rear light” … just for curiosity thought I would have a quick look just to see how the front one is to remove just if I ever had to ... I’m not very good at doing this type of job to be honest but watching this video would give me so much confidence if I had to do this job as this video is absolutely brilliant. Very informative and extremely helpful if I ever get in that situation. Absolutely brilliant and well done !👍🏽😊

@jerryfernandes800 6 ай бұрын

very helpful.Thanks for sharing.

@jasonshearer1839 8 ай бұрын

Watching this and i don’t remember seeing you remove the 2 bolts in the front lower grille?

@SelectVehicleSpares 2 жыл бұрын

Tools used: -T25 & T30 Torx: amzn.to/2NWrfON -Flat Screwdriver: amzn.to/3qRPuMn -10mm Socket: amzn.to/2NWrfON

@Flash-pg6ev 6 ай бұрын

Thanks I need to change led module, witthout this video I wouldn’t be able to do this

@TheBogisha 11 ай бұрын

Modern car industry - you have to tear apart half the car to remove the headlights. 😕 Good and useful video, thanks. 🤘🙂 Do you perhaps know if this seat model that comes with halogen lights can be fitted with LED lights that go on higher equipment levels? Just mount without software issues?

@SelectVehicleSpares 11 ай бұрын

Sorry we aren't sure on that one, we've not tried this ourselves.

@TraciaKurosawa Ай бұрын

And yet they get stolen so quickly. I don't understand anything anymore

@TraciaKurosawa Ай бұрын

Ah, about the upgrade, yes, you can mount LED headlights BUT you need to get them programmed. This headlights are no longer plug and play.

@rudoe2nd777 2 ай бұрын

Can I just replace the LEDs on my headlight instead of buying a new headlight because my driver side headlight has stopped working for some weird reason

@user-mx6cc5sc4g 2 жыл бұрын

👍🏻

@JasS-qf4ge 7 ай бұрын

Hi, great video, I have a damaged head light lense, is there any way to replace the lense and not the whole head light?

@karmaboost5437 6 ай бұрын

Hi there did you find.Way to repare it ?

@JasS-qf4ge 6 ай бұрын

@@karmaboost5437 No, do you know if you can?

@karmaboost5437 6 ай бұрын

@@JasS-qf4ge i asked some professionals ty said that the LED cant be replaced there for i need to replace the hole thing sadly ( it cost alot )

@richardhurr31 3 ай бұрын

I need to replace the driver's side headlight on my 2016 Leon Cupra. No fogs or washer jets but I have parking sensors. Do I need to remove the whole bumper including arch liner and parking sensors like in the video? Or is just dropping the bumper on to the floor enough.

@SelectVehicleSpares 3 ай бұрын

You may be able to get away with just removing the front arch liner fittings and the one side of the bumper. This should allow the bumper to move forward enough to get to the headlight fittings. Removing the top central bumper fittings will also help.

@richardhurr31 3 ай бұрын

@@SelectVehicleSpares thanks! Can leave the parking sensors plugged in?

@SelectVehicleSpares 3 ай бұрын

@@richardhurr31 Yes I would think so, as long as there's enough length on the cable. Personally I would unplug them, it's easy enough to do and then you don't risk pulling on the wires.

@richardhurr31 3 ай бұрын

@@SelectVehicleSpares can you unplug them without taking the whole arch liner off?

@SelectVehicleSpares 3 ай бұрын

@@richardhurr31 Not sure sorry, we've not tried to do it that way ourselves.