Secret way Installing this Crank Bolt! Works with Any Vehicle.How to Hold Crank Pulley Steady

Рет қаралды 126,431

3 жыл бұрын

#crankpulley #crankbolt #nospecialtools
Removal Crank bolt video • SECRET WAY! How I Remo... crank bolt
• Easy Way How to Remove... crank bolt
#automotive #cars #car #auto #carsofinstagram #carlifestyle #carporn #bmw #automotivephotography #instacar #carphotography #carswithoutlimits #photography #instacars #automobile #supercars #cargram #supercar #audi #ford #porsche#focused #mechanic #repair #utorepair #technician #carrepair #cars #car #wrench #wrenchlife #toyota #racing #carstagram #mercedes #carlovers #mechanic #s #luxury #diy #ferrari #turbo #carspotting #v #luxurycars #jdm #amazingcars #carcare #honda #autorepair #f #r #motorsport #bhfyp #engine #classiccars #autodetailing #volkswagen #carinstagram #instagood #mk #design #drive #detailing #sportscar #x #amg #otomotif #mercedesbenz #vehicle #technicalskills #automotiveindustry #womeninautomotive #womenwhowrench #womenintrades #womenwhobuild #womenempowerment #women #yesican #bethechangeyouwanttosee #panelbeatersunited #panelbeater #automotive #autobodywork #collision #autobodylife #garage #collisionrepair #automechanic #snapon #autorepair #automotive #auto #mechanic #car #cars #carrepair #autoshop #autoservice #repair #collisionrepair #autobody #autorepairshop #oilchange #autobodyshop #autoparts #bodyshop #carcare #mechaniclife #autobodyrepair #bmw #carservice #brakes #carsofinstagram #automechanic #collision #automotiverepair #tires #autorecycling #service #garage #carmaintenance #mechanics #engine #autodetailing #toyota #junkyard #audi #autorepairs #usedautoparts #vehicles #maintenance #mercedes #carrepairs #autopart #carparts #salvageyard #partsforsale #honda #partsforcars #autocare #performance #autowrecking #usedparts #ford #towing #dentrepair #salvage #mechanical #tools

Пікірлер: 110

@Leo137156 Жыл бұрын

Brilliant, my harmonic balancer just came lose and I was looking for a simple way ro tighten it. I always keep several old belts in my trunk just in case one breaks at an inconvenient time, so this is just perfect. Thanks a lot. Leo

@vorlockfoss1 2 жыл бұрын

I never comment, but that is ingenious...! I've spent many an hour struggling on my own to fit my harmonic pulley, with the crank tool in my left and and torque wrench in the other; oh the stress...!! Thank you...!!! 👍😁

@jfGarage4k 2 жыл бұрын

Im glad it work out great, please share and subscribe my video around much love

@bdento59 2 жыл бұрын

Thank you for this easy and ingenious tip!

@buffengineer1612 4 ай бұрын

I’ve been wrestling with this bolt for 2 days and got it in 2 minutes after this video. Granted this is my first balancer swap so learned a lot haha. Thanks!

@jfGarage4k 4 ай бұрын

Nice work!

@nathand1686 Жыл бұрын

This is awesome....it's sad that some folk just always gotta find something negative to say. Great job man!

@jfGarage4k Жыл бұрын

People around the word are all different, and alot of haters in the internet. Thanks for dropping by champ, Awesome feedback Take care

@JasonLee-lv7tm Жыл бұрын

Did this video help you in any way?

@fungames24 4 ай бұрын

He could of killed the AC compressor. A replacement could cost more than the special crank bolt tool.

@nomis97 2 жыл бұрын

This is a fantastic and easy way to torque that bolt, great trick, thank you for sharing.

@charlesdale1462 2 жыл бұрын

Impressed with your ingenuity

@radalozbi9335 2 жыл бұрын

Love the idea, genius.

@stacyb5250 7 ай бұрын

ty!ty!ty!....08 saturn sky ..worked fantastic!!!u definitely saved my car!

@ongv2491 Жыл бұрын

You are smart in using belt to torque the bolt. I did that too.

@yop911 2 жыл бұрын

This trick worked perfect on my Nissan Xterra, thanks man!

@jfGarage4k 2 жыл бұрын

Nice work

@yukiostrachan2048 10 ай бұрын

Brilliant! You don't know how much you've helped me with this video!!

@jfGarage4k 10 ай бұрын

Thanks for the Good Vibe! Im glad this video help you

@jokeraven9834 Жыл бұрын

Thank you very much, after trying so hard on different ways, I found your video which really helped, May God bless you. I'm so thankful that I'm going to subscribe to your channel.

@jfGarage4k Жыл бұрын

Glad this video helps.. thanks for subscribing and share the video

@The44smile 2 жыл бұрын

Thank you so much. It’s people like you that make KZfaq great. I was struggling with my harmonic balancer which requires 120 ft lbs torque.The engine is out and on a stand. My A/C is still on the car but your method worked with the alternator. I had to guess the torque with an air impact but it was off , so thank you again and pleas continue to produce KZfaq videos. FD

@JasonLee-lv7tm Жыл бұрын

Your engine is on a stand and you can’t hold the crankshaft from the flywheel side?

@JasonLee-lv7tm Жыл бұрын

You guessed the torque using an impact gun? 🤦 Well, good luck to you

@stevenwilliams9280 9 ай бұрын

This is so simple and brilliant! I literally was trying everything and did this and boom, got it to spec torque which was 200 #-ft

@richardwoodcock849 8 ай бұрын

I can't thank you enough for this trick solution. You are indeed, a life saver. I used this to torque the crankshaft pulley bolt on a 2001 Dodge Neon.

@jfGarage4k 7 ай бұрын

Excellent!. Thanks for watching

@w.t.7149 2 жыл бұрын

Great idea!

@kretosik1902 9 ай бұрын

THANK YOU

@TateReggie 2 ай бұрын

WOW!!! It worked for me today. Thank you very much.

@jfGarage4k 2 ай бұрын

Glad it helped

@wswan81 11 ай бұрын

Interesting, will be trying this very shortly.

@deniseandmarkfirestine7443 Жыл бұрын

Great job

@gordonsweep Жыл бұрын

thats what I needed it to know, life saver.. thanks much

@jfGarage4k Жыл бұрын

Glad it helped!

@raiderman28 Жыл бұрын

Awesome tip

@dusanpovolni4962 Жыл бұрын

Thank you. You are the best.

@jfGarage4k Жыл бұрын

You're welcome!

@fatwalletboy2 2 ай бұрын

Thumbs up from me! Genius.

@Transistor78 10 ай бұрын

I use a threaded rod through an old spark plug as a piston stop. Or the safer bet is to feed a length of rope down into the bore with the piston at BDC and leave a tail out, then tighten the crank bolt, compressing the rope.

@dannysautorepair Жыл бұрын

Great video

@Mike-br5jz Жыл бұрын

Worked on my 2013 corvette

@debasishbiswas421 2 жыл бұрын

Thanks 🙏

@Flizzor Ай бұрын

Is it bad if I use the one on my car I don’t have an extra belt lying around

@Mr.NiceGuy321 6 ай бұрын

This helped a lot. Before this I was putting a C-clamp on my cam gear with a wood shim under it to prevent it from denting the head, I did break one C-clamp doing it this way and don't recommend it. I did it your way only I didn't have a spare belt I used a ratchet strap. I tied it around my pulley and wrapped it around a few times and hooked the hook on the frame but it kept slipping so I just kept sticking pieces of rubber under the strap until it stopped slipping 👍.

@jfGarage4k 6 ай бұрын

HELL YA Creative Improvise guy. Your thinking what i was thinking, good work champ im glad it work great

@hunterrollins5646 4 ай бұрын

Will this work if i have to torque my bolt to 181 ft lbs though

@MILLERGAMIN1YT Жыл бұрын

I tried everything until I found the belt trick it IS the only thing that worked all the special tools was a waste of time trust me when I say go with the belt trick you will be glad you did and you will save yourself a headache I had to learn the hard but such I s my life lmao 🤣 and great video thanks for sharing 💯💢💯

@westernspud504 Жыл бұрын

cool thanks for the tip

@jfGarage4k Жыл бұрын

Awesome. Thanks for watching

@Hayder.J.H 14 күн бұрын

Perfect thanks It's works🎉

@jfGarage4k 14 күн бұрын

Awesome I knew it's gonna work

@SirFeatherfoot 4 ай бұрын

Just saved me $44. Thanks man. Pulled the job off with an oil strap wrench.

@jfGarage4k 4 ай бұрын

Glad I could help

@krispy5139 Жыл бұрын

Good tip, although I'm not sure if this will hurt the bearings on the alternator or AC pulley.

@johnlakes6948 4 ай бұрын

I believe i just destroyed mine with this method! After several days of changing my timing belt i can hear some bearing grinding, i actually hope that this is the AC pulley bearing and not something from my timing belt zone...

@krispy5139 4 ай бұрын

@johnlakes6948 might have already been worn out, or you were jumping on the breaker bar!? Hopefully not a major issue...

@johnlakes6948 4 ай бұрын

@@krispy5139 nope, i have not jumped it on a breaker bar. But i did change the excact same pulley bearing a few years ago. I actually used the same method to tighten it up 90 Nm + 90° that is what my manufacturer asked for

@yon1438 2 жыл бұрын

@Jasmine & Father Garage sir what torque specs/procedure for camshaft bolt??

@JasonLee-lv7tm Жыл бұрын

You need to find the torque specs for your specific vehicle

@mikegsg9r 5 ай бұрын

That's a great idea, but I wouldn't try it on some engines. BMW has some notorious high torque crank bolts 300 ft lbs + torque spec. I've undone a few and not worth risking other accessories.

@braumgraves4270 Жыл бұрын

life saver :D

@jerrymcg3199 Жыл бұрын

Genius!!! Worked a treat, many thanks😀 I torqued the bolt to 95Nm [70 ft lb] then 30 degrees then 15 degrees. That sucker is tight! 🤜🤛

@skip741x3 2 ай бұрын

on my 94 probe gt, it takes 120ft lbs... this is a cool idea for sure though yrs ago, I made a homemade holder that locks into my harmonic balancer to keep it from turning...

@riskfreesolutionsforbusiness 4 ай бұрын

carnt you just put the car in gear foot on brake then tighten thye bolt?

@robertsmith2956 3 ай бұрын

Not really. Engine still spins when you are stopped at a traffic light also. Pull the starter and use the flywheel teeth would work. But this is simple and elegant.

@kevwills858 4 ай бұрын

Nice little Trick ... thanks for sharing ... Theres too many things on KZfaq now that don't work 😂 As in Yin Yang "too much of something becomes its opposite" ... KZfaq: too many solutions become no solution ... (at least your trick works👍)

@olivermutukudzi7914 22 күн бұрын

my guy thank you ,i like friends with imagination

@jfGarage4k 22 күн бұрын

Its a pretty clever idea eh

@jerrythor290 2 жыл бұрын

nice bruh

@Akya2120 4 ай бұрын

Awesome trick! By the way, it's bad for your torque wrench calibration to keep torquing after it's clicked. If you want more torque, set the wrench higher.

@robertsmith2956 3 ай бұрын

and loosen it after use when you put it up. Don't leave it set on torque number.

@jfGarage4k 7 ай бұрын

Awesome thanks for watching. HELP support the Video and channel but clicking the ❤💲

@bigg221 23 күн бұрын

Which car did this old belt go to? Mine is unfortunately way too long.

@jfGarage4k 23 күн бұрын

Came from Ford Escape

@bigg221 23 күн бұрын

Appreciate you, wasn’t trying to spend too much just to torque down a bolt.

@robertsmith2956 3 ай бұрын

It is so simple, why didn't a child think of it? I bent lots of timing cover bolts using a screwdriver against one through the pulley. Luckily they have lots of them at the junk yard usually.

@frontlinemedia4270 Жыл бұрын

What about when you have a bolt that is 240 ft lbs? This will not work

@samcorne4773 Жыл бұрын

Maybe a strap from the frame to the pulley?

@robertsmith2956 3 ай бұрын

Time to put the flywheel lock on the other end at that ft lb.

@vikrammalviya7917 2 жыл бұрын

Sir how we know that pulley bolt open in clockwise or anti clockwise. Because most of the bolt open in anti clockwise.

@jfGarage4k 2 жыл бұрын

You need to do some research on your vehicle find out the rotation of the crankshaftbolt remove, in this video I've got going clockwise rotation to remove

@vikrammalviya7917 2 жыл бұрын

@@jfGarage4k sir can i know the direction of engine rotation. From front (radiator) of the engine

@robertsmith2956 3 ай бұрын

Look at the timing marks. the rotation would go from high to TDC.

@Ebonynightbeast 2 ай бұрын

No wayyy

@RaulRodriguez-mp7js 8 ай бұрын

Has to be a short belt, I tried my old rav4 belt, too long, too much slack

@jfGarage4k 7 ай бұрын

Little short belt is better

@raullopez9639 2 жыл бұрын

👍🙏

@YourOwnAdventure Жыл бұрын

Fickin legend....

@joshuagrinstead8854 8 ай бұрын

Does not work of ford explorer

@2jzgenat 8 ай бұрын

74 foot pound?? Kinda low imo

@jfGarage4k 7 ай бұрын

Service Info torque specs say 75lbs

@robertsmith2956 3 ай бұрын

Mine is 75-105. Think my buick is 70 + 90 degrees, and it is a throw away bolt. But it has extractor screws, so I put bolts in them and use a crow bar so it can't turn.

@skip741x3 2 ай бұрын

does seem Very low... mine was 120 on 94 probe gt

@mansonmydog 2 жыл бұрын

You are not getting the true torque spec with all those extensions.

@jfGarage4k 2 жыл бұрын

Sorry it was off camera. But here the procedure crankshaft bolt torque 74 ft lbs plus 90 degrees wait 2 seconds add another 15 degrees and your Done

@yon1438 2 жыл бұрын

@@jfGarage4k sir what torque specs/procedure for camshaft bolt??

@soundfxasmr 2 жыл бұрын

@@jfGarage4k What he means is you lose torque with added extensions. So you might be getting the 74 ft lbs "click" out of the torque wrench, but in truth some of that torque is being lost at the extensions. You could always double check your torque by removing said extensions and getting under the vehicle to get a better angle/space to actually torque it down. I'm looking at alternatives on here because my vehicle calls for a strap wrench for this procedure and I don't have one. Actually using a belt on the crank pulley and the A/C compressor didn't cross my mind, so thank you for that! Will try this out later in the morning.

@HybridOfficial00 2 жыл бұрын

Everyone spends the whole video leaving the tools on the shit and never take the fucking thing off. ...

@ricky-sanchez Жыл бұрын

This vid is for putting the pulley back on, not taking it off.

@jfGarage4k Жыл бұрын

Title say Installing not taking off the pulley Here the video of taking the bolt and pulley off kzfaq.info/get/bejne/e9Oaf8ek28qdqKs.html

@chuniquepaceno470 3 ай бұрын

Thank you and I hope it works on my 3rd gen 4Runner, which is torqued to 170+. Very helpful for future things, either way. Again, thanks.

@deeznutzz101 Жыл бұрын

Why not use impact gun? Lol you must be a rookie

@mylifeisJDM Жыл бұрын

Pot meet kettle. Impacts are fine removing but put way too much torque cranking them back on. These crank bolts often need less than 100 ft lbs. It's best to tighten and torque down with hand tools.

@nathand1686 Жыл бұрын

Right, best to torque it right

@deeznutzz101 Жыл бұрын

@@nathand1686 i used a impact, 40k miles still going.

@caffeinepowered3957 10 ай бұрын

@@deeznutzz101No one's impressed, rookie.

@robertsmith2956 3 ай бұрын

@@deeznutzz101 It is REMOVING at 90K that may be the problem.