SEE THROUGH Filament - 3D Pen Tutorial

Рет қаралды 13,110

Күн бұрын

A detailed tutorial for using “See Through” filament with a 3D Pen. I talk about some tips and tricks and show some new techniques for making 3D Pen creations with this special filament.
Topics Discussed:
- Comparison of different smoothing methods
- Making Large Gems
- Failures to avoid
- Making Stained glass-like creations
Interested in improving your 3D pen skills? Check out this playlist- it has something for all skill levels!
• How to 3D Pen (Tutorials)
Come say hi-
Twitter: / potentprintable
Main 3D Pen used in this video:
amzn.to/2K6c5AT
(provided by Scribbler 3D Pen-
scribbler3dpen.com/)
Recommended See Through Filament:
Mika3D Sample Pack shown in video
amzn.to/2lJkFwX
Aqua Blue 1kg spool shown in video
amzn.to/3gMX9XN
Tools and Supplies used in this video:
Flush Cutters
amzn.to/2GUzqUj
Blue painters tape
amzn.to/2LggdC7
Tac Adhesive Putty
amzn.to/2Lf2j36
As an Amazon Associate I earn from qualifying purchases.
Paper Gem Templates:
www.minieco.co.uk/paper-gems-n...
Stained Glass Heart Template:
www.guidepatterns.com/45-stai...
*The tools and methods shown in this tutorial can be dangerous, so please use the correct safety equipment, be careful and use caution when dealing with anything from this tutorial.*
#3dpen #3d펜 #3Dpero

Пікірлер: 51

@spoinlar 4 жыл бұрын

Thank you for showing the things that didn’t work! I really appreciate that you talk about everything you tried, not just the successes.

@PotentPrintables 4 жыл бұрын

No problem, I feel like people don't talk about that kind of thing enough.

@lpanic 4 ай бұрын

That stained glass idea looks amazing as well as mirror usage.

@rendaowe 2 жыл бұрын

I could listen and watch your videos as a marathon. Don’t worry, I’m a grandma that is truly fascinated by new art. 👍🏼 And yes, I love your tips and that you save us so much by telling us about your failures, that is real true honesty without arrogance, got to love that!

@jenarutberg9323 3 жыл бұрын

Learning a lot from your videos. My pen came with no real instructions other than how to turn it on, put in and remove filament. Understanding where to start and different possibilities makes it an enjoyable tool that I'll now use. Love the failures-learning moments- you share too! Stained glass effect was awesome! Looking forward to trying it when my skill level is a bit higher! Thank you!!!

@danielkarcz4895 3 жыл бұрын

Brooo!!! I just found a way to smooth back side of mirror polish without ruining it ! Thanks for your helpful videos, I hope u are still here ;)

@ZebraandDonkey 4 жыл бұрын

Very nice.I also like the idea to draw your pattern onto the mirror and then follow that.

@PotentPrintables 4 жыл бұрын

Thanks James!

@Threnode 4 жыл бұрын

Thank you for detailed examination of these filaments. Now I will know what to expect from them.

@teovb6237 4 жыл бұрын

im so happy to see another video!!!

@PotentPrintables 4 жыл бұрын

Glad to hear this and hope you enjoyed it!

@nitrothunderbird6740 4 жыл бұрын

Clicked instantly when I saw the notification

@PotentPrintables 4 жыл бұрын

Heh, thanks!! Hope you found it useful.

@carbilicon 2 жыл бұрын

I like the blue faceted things.

@LwBw7887 4 жыл бұрын

Wow. Thank you for this amazing video.

@PotentPrintables 4 жыл бұрын

Glad you liked it!

@TD3DMakes 4 жыл бұрын

Very informative and interesting as always. Cool project Ali, thanks for sharing!

@PotentPrintables 4 жыл бұрын

My pleasure!

@JGD16 4 жыл бұрын

Another excellent tutorial with some creative techniques. Now I can make some tiny stained glass windows for my tiny church

@PotentPrintables 4 жыл бұрын

The church of JGD16- I like the sound of that.

@scottbaeder37 4 жыл бұрын

Don't know if anyone else mentioned it, but you can use things like glue stick on the glass/mirror to help with sticking (think 3d printer things on getting first layer to stick). PVA based hairspray is also a good alternative.

@MileyonDisney 4 жыл бұрын

Far out, man. That was really groovy. I can dig it. Seriously, though, that was pretty cool. I have lots of translucent filament, but I haven't used it for anything yet. I'll have to try that mirror trick Thanks!

@PotentPrintables 4 жыл бұрын

Glad you enjoyed it!

@bigfoot8778 4 жыл бұрын

First off Thanks for doing a vid on see thru. Tip #1 hair spray or elmers washable glue stick will help filament stick to any surface not sure how the shiny side will turn out. Its works with opaque filaments great. I used this technique alot. Oh I wonder if you smooth the rough side then bake it how that would turn out.

@PotentPrintables 4 жыл бұрын

Stay tuned on some of that, I have plans :)

@bigfoot8778 4 жыл бұрын

@@PotentPrintables always am

@PhoenyxAshe 4 жыл бұрын

I'm wondering if you could use a thin sheet of glass the same way. You'd have the extra option to simply tape your design to the underside then.

@PotentPrintables 4 жыл бұрын

Great idea! I bet it would look quite good :)

@spoinlar 4 жыл бұрын

I use glass this way, and it works great. As it turns out, the cheapest way I found to buy a sheet of glass is to buy an inexpensive picture frame. Just buying a pane of glass from a hobby or craft store would have been much more expensive. Also, wrap the edges of the pane in masking tape, to avoid getting cut.

@3DPlasticFantasy 4 жыл бұрын

I would had never guessed it that is transparent if you didn't put the paper behind it. Those filaments are very nice to use with led lights. The only drawback is that I've found only petg samples from my local stores and I am not sure how harmful they are compared to pla.

@PotentPrintables 4 жыл бұрын

I've only used opaque PETG- it might be interesting to try see through PETG and see if it is more durable. Let me know if you try it out, I'd love to see what it looks like.

@3DPlasticFantasy 4 жыл бұрын

@@PotentPrintables I might give it a shot :)

@LuisElectronico 2 жыл бұрын

they're called clear because when used on a 3d printer you can actually get some pretty clear prints, provided you do some post processing, but you can get the clear

@magazinSnoviKucaDom 2 жыл бұрын

It's great. Through which site to order it?

@SkylerLinux Жыл бұрын

The thought I have is did you try smoothing over the mirror side, esp with the stained glass style? As smoothing over the back side after the front might help. My other though is would using two warming plates clamp style help?

@mfriedlander2 3 жыл бұрын

I have a series of drawings that I want to make into 3D but I'm a total beginner on the 3d media. I also saw your pen choices video but couldn't here pick one for me because I do want to grow into and finally be able to do my drawings, Any advice, please? Oh and I'm in Europe Thank you so much I'm having a great time seeing all your videos.

@RenatoYamamoto481 4 жыл бұрын

Nice! I wonder what would be the results if you printed them in an cd rom

@PotentPrintables 4 жыл бұрын

Interesting idea, that could be fun to try!

@ayushpandit2527 4 жыл бұрын

Can you make a video telling the cost of the 3d pens and which is the best to buy .

@jerib4514 Жыл бұрын

what is a good ferris wheel to start with. I am having issues joining things together

@RegularOldDan 4 жыл бұрын

I had a thought - I wonder what would happen if, after you created the flat stained-glass creation, you sandwich it between 2 mirrors that are subsequently heated with two printer beds (detached from printers, of course. :-) ) and compressed slightly? I would assume 80-90C would be sufficient. Would that smooth out the other side some? I would anticipate it would still show banding, but some of the artifacts might be reduced and give a neat effect.

@PotentPrintables 4 жыл бұрын

You're reading my mind Dan! I'm going to try something like this and see how it goes :)

@RegularOldDan 4 жыл бұрын

@@PotentPrintables WOOHOO! I can't wait to see the results :-)