See Thru Rotary Engine in Slow Motion

See Thru Rotary Engine in Slow Motion - (Wankel Engine) 4K

Рет қаралды 10,144,341

6 жыл бұрын

I Run a See-through Rotary (Wankel) engine and Film it in Slow Motion so we can see how the combustion process works, aka Wankel Rotary engine.
here you can also see what is inside of a rotary engine (Wankel), while it's running in full view to see just visually witness how a combustion process differs from the piston engine counterpart.
First ever See Through Rotary Engine Series on KZfaq or anywhere in the world.
Have you ever wondered how a Wankel engine works differently from a conventional piston engine then you're watching The Right video, because with my see-through angle engine you can see inside the combustion chamber as the engine is running while I film it with high speed cameras to show you how the Wankel combustion process works.
This is the first episode of the see-through rotary engine series and the second season of The see-through engine series.
So make sure to go to the playlist tag and check out the entire series of see-through Engine videos, the second season starts soon.
Check Out Legit street cars channel here:
/ @legitstreetcars
👊 ►Subscribe to get notified when we post new episodes and videos. PLEASE SUBSCRIBE HERE: goo.gl/ffsm8r
Heres our Google Plus:
plus.google.com/u/0/+WarpedPe...
🌟 FOLLOW US ON SOCIAL NETWORKS:
🐦 ► Twitter: / warpperception
👍 ► Facebook: / warpperception
◙ ► Instagram: / warped.perception
☢ ► IMDB: www.imdb.com/title/tt5548028/?
Please leave any opinions suggestions or comments Below and don't forget to check out our other videos and subscribe , we have many more videos on the way. Thank you.
Watch this in 4k whether you have a 4k tv or not, it looks incredibly insane, in a good way. its awesome !
Directed By: Matt Mikka
Carbon 12
www.c12.tv
Matt Mikka
www.MattMikka.com

Пікірлер: 8 800

@michaelbuckers 4 жыл бұрын

This engine backfires more than supervillain's plans.

@lotus7071 4 жыл бұрын

Mi 28 😂🤣🤣

@akhileshmoorthy 3 жыл бұрын

😂🤣

@Charlie-nc3cp 3 жыл бұрын

@James M its knocking not frontfiring or backfiring

@mikescudder4621 3 жыл бұрын

Not while actually running...

@mikescudder4621 3 жыл бұрын

@@CarlMan69 if an engine was made up of equal forces it wouldn't even turn.

@justaguy4real 3 жыл бұрын

just like with firearms, I'm so amazed at how fast combustion type engines operate mechanically with how fast the combustion/explosive process occurs, and so efficiently without more breakages... simply incredible

@gerryco 2 жыл бұрын

I am as equally amazed by sychromesh and auto gearboxes. So many things working in harmony, it looks like some form of alien tech

@benhartmann2793 Жыл бұрын

Boom dorito make me go vroom

@palohagara105 Жыл бұрын

And compare it with Electro-motor with no moving gears and parts. Just bearings.. and magnetic force. And 90% power factor, mostly higher.

@Dragon22078 Жыл бұрын

@@gerryco them Germans man.

@theairaccumulator7144 2 ай бұрын

@@palohagara105electric motors are only applicable in small cars imagine an electric excavator or dump truck or airplane

@Fisheee123 3 жыл бұрын

Slow motion: *Warzone noises* Normal Speed: Kids blowing into their arms

@KanzakiZD 3 жыл бұрын

lmao true

@genericname3685 3 жыл бұрын

The slow mode is like a tank shot

@greenshadow131 3 жыл бұрын

Well they obviously edit the sound in. High speed cameras don't come with high speed microphones lol

@Sebastian-hg3xc 3 жыл бұрын

@@greenshadow131 It was a silly idea. I would have just left it silent.

@andresvalverde5182 3 жыл бұрын

Slow motion really sounds like the Germans invading Poland.

@Mr.Takahash1 3 жыл бұрын

Rotary engine: Have a displacement of a 4 cylinder, have power of an 6 cylinder and fuel economy of an 8 cylinder.

@Pichipieify 3 жыл бұрын

*Fuel economy of 12 cylinder 😂

@She1lby 3 жыл бұрын

@@harmosm1084 As every other engine if you are dumb

@She1lby 3 жыл бұрын

@@harmosm1084 If you treat your engine well rotary lifespan will be pretty average in comparison to other engines that we have now. Not a recordsman like some mercedes engines from 200x but still.

@She1lby 3 жыл бұрын

@@harmosm1084 My RX8 has ~80k and i don't need it. Engine runs perfectly. At least 100k is completely possible.

@She1lby 3 жыл бұрын

@@harmosm1084 It proves my point anyway, also you can't be sure - it all depends on a lot of factors.

@TheExcellentVideoChannel 5 жыл бұрын

There's no clearer way to explain a rotary engine working than actually seeing it in slowmo . Brilliant work!

@WarpedPerception 5 жыл бұрын

Thank you

@SoggyOatmeaI 4 жыл бұрын

How does someone dislike this video? He gives us the exact content he advertised...

@bedlamp9157 4 жыл бұрын

Can't please everyone

@Matityahu-the-God 4 жыл бұрын

Idk about everyone else, but sometimes when I accidentally click on a video that I don't want to get suggestions based on, I'll dislike it to correct YT's algorithm.

@royhsieh4307 4 жыл бұрын

maybe some people are expecting dorito commercials?

@tarantulamadness6191 4 жыл бұрын

@@Matityahu-the-God That's why there is a feature where you click the 3 dots by a recommended video and click on (not interested) opening the video just to dislike it is pretty dick when there is another way to correct the algorithm.

@permagrin8742 4 жыл бұрын

Drunk, high, missed the correct button. Have angry hearts and are acting out since it’s the internet.

@getstuk87 Жыл бұрын

I'm impressed with how incomplete the burn cycle is on this model, look at all that fuel being wasted. Very cool video!

@jimparr01Utube Жыл бұрын

Yes, it is a shame that so much 'burnt' fuel is wasted. We can no longer accept such pollutants in today's world. But several experimenters have found solutions to this problem so the engine may have a future yet as a classic and compact, lightweight power-plant.

@yamaha94O Жыл бұрын

Full size rotory engines found in the rx sereis of cars are the same way. They're super prone to forward firing due to incomplete combustion and the unburnt fule igniting in the hot exhaust. Terrible for the environment. But super cool. Lol. I drove a second gen rx7 before. Super fun car. Didn't end up buying in cause the wireing for the lights and everything to make it road legal was shot. Super fun car tho. Braaaaaapp! POP! POP! POP! BRAAAAAAAAPP!

@pistonburner6448 Жыл бұрын

@@jimparr01Utube That tiny, very imprecise and rudimentary engine does not represent how large wankel engines function.

@jimparr01Utube Жыл бұрын

@@pistonburner6448 Understood.

@pistonburner6448 Жыл бұрын

@@jimparr01Utube I have to add that in a way you're right though: that tiny engine does in fact demonstrate a fundamental flaw in wankels, it just does it in a far too exaggerated way. The situation isn't anywhere near that bad, but the same flaws do nevertheless exist. I personally believe that wankels may never become 'fixed' of their flaws, but we have naturally not seen all potential improvements so it's impossible to know. Sort of how 2-strokes were possible to turn into clean-burning things with slight changes (mainly direct injection and removing the oil from the fuel).

@SW-zx3op 3 жыл бұрын

That was epic. From concept, to building your own and then demonstrating the mechanism/physics so clearly!

@KSPilo 6 жыл бұрын

226 tries? Man, much appreciation and thanks for your effort and dedication. It's awesome to see the combustion process. 👍

@osiristejeda4433 6 жыл бұрын

I first learn about this motor about 50 years ago, and today finally I saw how it works. Thanks for this beautiful video and explanation.

@BlaqRaq 3 жыл бұрын

“That’s what you call dedication” indeed. Thanks very much for sharing. Your hard work didn’t go in vain.

@user-cb2lz8yy9s 3 жыл бұрын

This is one of the coolest uses of high speed cams I’ve ever seen. This was awesome!

@ketos8315 6 жыл бұрын

226 TAKES :O give that man an Oscar for dedication :D

@Trident_Euclid 6 жыл бұрын

DrPepper 1337 Quality

@man_on_wheelz 6 жыл бұрын

I don't know if this is the only video on KZfaq showing the inside of a live, running Wankel engine, but it was a real treat to watch! I already know how they work and after seeing a few videos on how traditional 4-strokes look in action, including yours, this was really cool to add to my watched list! These videos basically confirm what my mind already imagined it would look like based on what I know.

@WarpedPerception 6 жыл бұрын

It actually is, I contacted Mazda and they told me nobody has ever done it before except for them, one time back in the 60s. Mazda should know if anybody does.

@BruceCarbonLakeriver 6 жыл бұрын

I've to agree, even as engineer it is really intresting to see that internal work flow in realtime and also in slow motion. Thank you Warped Perception - > thumbs up and a subscribe :D

@mattl3023 3 жыл бұрын

I love your passion for finding out how things work and then for sharing that with others. Setup and filming both masterful and flawless. I wish you had been one of my schoolteachers and communicated that passion for learning to me when I was younger. It's not too late, I guess. Thankyou.

@terrell07981 Жыл бұрын

You accomplished two things with that video. You made me respect the simplicity of the rotary engine and gained a subscription.

@Sasasala386 4 жыл бұрын

What makes this video impressive imo is not the engine. But the work Mr Dude The Video Maker went through to film it!

@WarpedPerception 4 жыл бұрын

Double love on this comment ❤️💕. I appreciate that, it was not easy to make it work. Thanks a ton !

@WarpedPerception 4 жыл бұрын

Yes that is already in the works, and I almost did the larger version first, but I figured the first episode had to be the simplest Rotary I can come up with, and move forward from there. Thanks!

@elmo2001lou 4 жыл бұрын

Agreed

@louissmith7717 4 жыл бұрын

Warped Perception o

@cookiedestroyer2801 4 жыл бұрын

Although this is a cool video I disagree, it’s more impressive to invent such a machine than to film it. Edit: Don’t misunderstand me, I do think this is a impressive video and a lot of work went in to it.

@MsLampalampa 5 жыл бұрын

1% fuel is burned and 99 used as shower :)

@yoshi1u2 5 жыл бұрын

Lol u can see how much fuel is in there and rotary is backfiring like crazy

@dman9579 5 жыл бұрын

Remember,it didnt have one side of the combustion chamber on it! Wankles run very clean,and very efficient,and VERY strong.

@Someguy6571 5 жыл бұрын

@@dman9579 They don't run clean. The burn oil by design.

@tamumatt12 5 жыл бұрын

Chris McRoy got em

@doktorbimmer 5 жыл бұрын

@IfYouDisagreeYouAreWrong *Wankels are definitely not made anymore either...*

@eugenenalpin6058 3 жыл бұрын

Holy shit, this is actually the first demo that made me realise that the inside of the engine is shaped so that the three chabers are always separated by apex seals Really cool stuff

@omegaman1409 Жыл бұрын

I remember back like 30 years ago talking with a group of friends at work about the rotary engine and how out of the box it was. It was the first time I heard about and still think it was revolutionary.

@shaqattac 4 жыл бұрын

5:00 that went from pistol, to machine gun, to the A-10's autocannon!

@ProjectFarm 6 жыл бұрын

Awesome job explaining how the rotary engine works. Also, you did an amazing job with the slow motion! Thank you very much for making this video!

@WarpedPerception 6 жыл бұрын

Thank you!,

@alberteinstein3078 6 жыл бұрын

Two highly underrated channels with quality content right here. Thanks guys!!

@WarpedPerception 6 жыл бұрын

Albert Einstein your welcome

@deusexaethera 6 жыл бұрын

Now I think what we all want to know: Will it will run on WD40? ;)

@m_2ppe617 6 жыл бұрын

When i hear the engine sound, that like 2 stroke. But without piston and cylinder. And more simple. I hope can install on my bike..😂

@jawk007 Жыл бұрын

As a mechanic student, thank you for the video, it clears up a lot instead of visualizing it in a book!

@mnaufalrifaldy8806 3 жыл бұрын

Aside of this epic shot, lets appreciate this man has done the *last* clip for 226 take to give you this epic information

@BigDaddyDanny 4 жыл бұрын

Rotary be like: haha dorito go spin

@philosophia_ 3 жыл бұрын

This was way funnier to me than it should've been

@M_Alistair 3 жыл бұрын

dorito go braaaaaap

@kuba.504 3 жыл бұрын

dorito go s🅱️in

@axel9291 3 жыл бұрын

Daniel Cilantro be like haha comment go steal

@BigDaddyDanny 3 жыл бұрын

Axel 92 something like that

@Madrilleno 6 жыл бұрын

Brilliant, never saw a better demo of how a rotary works.

@door518kimber3 11 ай бұрын

Incredible . I did an assignment in the fifth grade from an article in one of my grandfathers popular mechanics magazines. My 1st A+. I’m 62 years old. Thank you!

@MarwanMahdy 6 ай бұрын

the slow motion of the rotor was one of the most beautiful thing I've ever seen. Thank you.

@johnnyq90 6 жыл бұрын

This is seriously epic! Congrats on the idea and execution!

@WarpedPerception 6 жыл бұрын

thank you, it took me 2 months to get it to work. You want to know what's crazy, every time I was building something on this engine, testing it, breaking it doing all the research and development. ... Almost every time I had you in my mind when I was telling myself, "this thing is just too damn small" ... Lol.

@joshuajordan8444 6 жыл бұрын

Love your videos

@user-po6hn9id1t 6 жыл бұрын

Warped Perception I would love to see a cooperation between you two

@WarpedPerception 6 жыл бұрын

ΑΡΗΣ ΚΟΡΝΑΡΑΚΗΣ that's a good idea !!

@Reclinted 3 жыл бұрын

Run it on propaint please

@yomismoa5454 5 жыл бұрын

Thank you SO MUCH!!! for shareing, for your interest, for your dedication, for your patience… You have shown us just what I was willing to see: how does an engine work from the inner side. Thank you and greetings from Santander (Spain)

@wesleys3905 Жыл бұрын

I just want to say this video is PERFECT. It was EXACTLY what I was looking for

@polliestander 2 жыл бұрын

Wow the sounds on this is absolutely amazing!

@Boog13man 6 жыл бұрын

No wonder my rx8 gets terrible gas mileage its not burning 75% of the fuel......

@r1yamahamini 6 жыл бұрын

Eh, try turboing it and running on E85... I get 11mpg in my RX8:) But it's the most fun car Iv'e ever owned...

@Boog13man 6 жыл бұрын

Punchy LightBeer how’s it holding up to boost?

@r1yamahamini 6 жыл бұрын

Iv'e been through about 8 engines in 8 years, but that was because of the dodgy workshops (I tryed 3) not building it right. Now over the last 2 years Iv'e redone everything and it's running great:) - long story..see my channel.. Iv'e run up to 20 psi recently but I have read the stock Renesis can't flow more than that besides the detonation risk with it's 10:1 compression. My stock ( 5000km {3100miles} ) short block is running fine on 17 psi but that is mostly because of the E85 not my shit tuning ability.

@Tb0n3 6 жыл бұрын

Doesn't the RX7 engine survive boost much better? The RX7 ports are on the circumference instead of on the front/back on the RX8 if I recall correctly. Do you go through many APEX SEALS?

@lyokss 6 жыл бұрын

Tb0n3 I was told that if you mix a little 2-cycle oil in your fuel then it will increase the lifespan of the apex seals. It makes sense if you think about it and digging around the internet it appears to work.

@cometdude6789 6 жыл бұрын

My life's complete, I've seen a piston and a rotary engine run

@iowapanner2223 3 жыл бұрын

Incredible camera work! I owned a new Rx3 in 1973 and it was a blast! They had a flat torque curve and were so smooth that it had an alarm to tell you that you were over revving.

@PowerSports 2 жыл бұрын

The first time my RX7 alarmed at me, I literally jumped out of my seat, nobody warned me about the redline alarm, lol.

@MixtapeEntertainment 3 жыл бұрын

5:29 The morning after Taco Tuesday

@corinakohlmeyer4784 5 жыл бұрын

I only can say: Thank you for doing this!

@iHSAN_9T3 6 жыл бұрын

I don't have enough phrases to say that was too awesome explanation about how rotary engine works

@ladymopar2024 6 жыл бұрын

iHSÁN 9T3 so cool!!!!

@lavapix 3 жыл бұрын

How about an 8 Wankel engine? Instead of a V8, it's a W8. I remember driving a girlfriends 85 RX7. It was so smooth. A ticket machine.

@xristos1857 3 жыл бұрын

@Calvin Currie you stack more rotor housings

@jamesgent5897 3 жыл бұрын

This does exist but 8 is to much. Search 3/4/5 rotor rx7’s

@jamesgent5897 3 жыл бұрын

Also a “w” engine configuration already exists. Search Bugatti w engine

@xristos1857 3 жыл бұрын

@@jamesgent5897 yes many WV have this type

@jamesgent5897 3 жыл бұрын

@@xristos1857 the classic vr6 engines

@surfbyrd1 Жыл бұрын

Thank you for all the neat see thru engines you've built!

@jimweeks9359 4 жыл бұрын

You have some of the best videos showing things that I'd love to do but can't. The Rotary videos are fantastic! Thanks and it was worth the effort and blisters.

@mproyyc2001 6 жыл бұрын

Good job Buddy! I really appreciate that hard work and dedication to the making of this video .

@LightGesture 2 жыл бұрын

This was definitely a pleasant video to watch. That's so cool that you made a miniature, see- through rotary... thanks for the view!

@SinMideo18 2 жыл бұрын

Ive been working on engines for about 8 years now and im being taught by a 3rd generation mechanic. My bosses grandpa worked on the model A fords. This is the coolest video ive seen. Ive only been able to imagine what its like to see inside the chamber of a cylinder like this. Exited to show my boss on monday. Keep up the good work!! 🤙👍👍

@alcs999 Жыл бұрын

Do you live in America ?

@justingibson8147 6 жыл бұрын

Brilliant idea adding the acetylene to the slowmo. Best demo of a rotary I've seen yet.

@9mmARman 6 жыл бұрын

I was always curious how a rotary engine functioned, now I know. I'd give you 10 thumbs up if I could. Thanks!

@imjeremy51 6 жыл бұрын

Nah he's got plenty of thumbs......

@Deere2154D 6 жыл бұрын

They are garbage. Last an 1/8th the time as a piston engine

@MainMite06 4 жыл бұрын

Deere2154D 12 years ago Mazda was running 3-rotor powered RX8 tube-frame chassis cars in Grand American sports car racing(now merged with IMSA) that was not only wooping V8s & Flat 6s with shear power it had was also killing the piston the engines on the reliability front while still setting up a fire show. Read *Speedsource RX8* *Read Mazda RX8 GT*

@joeKisonue 2 жыл бұрын

@@Deere2154D Do you have any objections to 2 stroke dirt bikes? I would say you might rebuild the top end many times in time but never have to do that on a 4 stroke. Most every one who complains about rotaries has never had first hand experience. I think they are far easier to remove and rebuild than a subaru.

@alexanderstohr4198 3 жыл бұрын

thanks for spending so many efforts! it really shows the principle quite visible to everyone - and i mean the principle of combustion driven motors in general

@userwain 3 жыл бұрын

Bought an rx7 in 79, had it about 8 years , liked it a lot. Great video.

@HaloofBlood1 2 жыл бұрын

Warum nicht länger?

@mr.e1220 4 жыл бұрын

I rebuilt with a friend my rotary engine from my 1982 Mazda RX7 when I was a teenager. What an interesting build that was. It was like building a sandwich.

@hamjohn8737 3 жыл бұрын

When you actually put one together, you see that it is really easy to do. Sadly, here in SoCal, I'm one of the few that has actually built one. All the dealerships simple buy a re-manufactured small block from Mazda, swap the parts and drop it in.

@kfl611 2 жыл бұрын

A dagwood sandwich?

@faniss1380 6 жыл бұрын

Dude that was by far the coolest thing ive seen the last 2 months on youtube. Perfect

@vigneswarsundaramurthy327 3 жыл бұрын

Sincerely I value your dedication You are igniting young minds through this process.

@HelloWorld-lg1pz 3 жыл бұрын

Thanks for all the good works my guy. That was truly amazing to watch.

@LSniumUwU 4 жыл бұрын

i cant explain how awesome such a small rotary engine can be. Thats just awesome.

@mariorodriguez653 6 жыл бұрын

Thank you for your dedication to show us how these machine works. I really enjoyed watching this video and found it very satisfying.

@Spectre_Starlord 3 жыл бұрын

This is tremendous effort! Thanks for putting up so much effort you are such a great person to show us inside the wankel

@brachyuthuni 2 жыл бұрын

Thanks for showcasing the Wankel rotary model engine! THANKS!

@friendlypiranha774 5 жыл бұрын

That is awesome dedication from your side to have made this in the first place. Thanks.

@westhamtube 6 жыл бұрын

One of the best educational vids I've seen in many years buddy, excellent 10/10 😁🇬🇧🇺🇸😁

@PDXDrumr 3 жыл бұрын

Best Wankel demo I've ever seen. Thank you.

@luischacon6439 2 жыл бұрын

Thank You so much for all your help and dedication....

@zombiecancers217 4 жыл бұрын

5:28 when u get home from school

@LanaaAmor 4 жыл бұрын

You're talking about that throttle valve aren't you

@pcyshopath 4 жыл бұрын

5:37 when u rip a fat one in class

@basedmonke3471 3 жыл бұрын

Underrated comment

@zaihami5185 3 жыл бұрын

The wind of freedom

@andresvalverde5182 3 жыл бұрын

First day with girlfriend when on toilet

@KarlMaxArzadon 5 жыл бұрын

6:16-6:20 playback at .5x sounds like transformers sound effects

@kajmak64bit76 5 жыл бұрын

More like 0.75x

@benjaminmartinussen2388 5 жыл бұрын

wow sounds awesome a bit like a videogame companys theme "song" in the intro

@DickotheClown 4 жыл бұрын

HOLY FUCK THATS BADASS!

@juvnchy 4 жыл бұрын

Cool asf

@ulyssessait 4 жыл бұрын

this is where probably michael bay gets his sound file for the film.... this channel can sue michael bay

@ziyanannizhan6951 3 жыл бұрын

never watched this kind of dedication before, love this sm🔥🔥🔥

@YoArteeSon 3 жыл бұрын

Phenomenal explanation, the way you explained it certainly educated me. Such a great video. Thank you!!!

@Guitarfollower22 6 жыл бұрын

This channel and Engineering Explained greatly help me understand how engines, and other vehicle parts, work. Thanks again man.

@WarpedPerception 6 жыл бұрын

Thank you, yeah engineering explained is awesome.

@Guitarfollower22 6 жыл бұрын

Eric Mezenberg EE makes me understand it and Warped Perception shows it. Without them I’d be kept in the dark.

@kbmiller302ify 6 жыл бұрын

If I met engineering explained I would punch him in his face

@doktorbimmer 6 жыл бұрын

+kbmiller302ify What's you beef with Jason?

@Guitarfollower22 6 жыл бұрын

why because he is more knowledgeable, in this field, than you?

@MRTuning704 6 жыл бұрын

Y'all still killing it!

@rb032682 3 жыл бұрын

Very cool stuff. All the see-through engine stuff is amazing.

@zahinnazhan7200 3 жыл бұрын

I dont know why, but this is so satisfying.

@lelandwigren 6 жыл бұрын

thank you so much. as a rotoray addict this made my freaking day. ive always wanted to actually see that crazy little triangle doing its job. thank you sir. :)

@martingeeves9817 5 жыл бұрын

I love ur vids mate.. I can see how much effort goes into such simple exercise.. Not so simple at all.. That's fantastic loved it.. Keep up the good work.. Us petral heads love this stuff.. Combustion engine controls the world last 100 yrs..

@lucky5105928 Жыл бұрын

Great work dude. I really appriciate your passion and dedication. This thing takes a nation to the heights.

@jasonpicano1199 3 жыл бұрын

Totally Awesome. I've always wondered exactly how that type of engine works... MANY MANY Thumbs up

@muhammadkamran851 5 жыл бұрын

Dear sir you have explained it very beautifully and a lot of appreciation for your great work! Thank you so much! ❤️

@OmarDelawar 4 жыл бұрын

This was beyond awesome. The Wankel engine is a work of genius.

@tyleralm1078 Жыл бұрын

That is awesome! I always knew how it worked but it's something special to actually see it, and in slow motion!!!!! Thank you for that!!!!

@01ZO6TT 3 жыл бұрын

Wow!! Awesome video! I’ve always wondered how they worked. That’s for the video and all the time it took to make it. It was well worth it. Props!!

@creatinefather 5 жыл бұрын

Absolutely love this video, don’t know much about cars but I love them. This gave me so much info on what cars have this engine and I loved the combustion

@madduck692002 6 жыл бұрын

What a heart for dedication you've got brother. That was super cool, keep them coming! 😃

@alexanderSydneyOz 3 жыл бұрын

For the record, YES that is dedication. Thanks for your efforts; that was really interesting.

@Coolguynom1 3 жыл бұрын

This is one of the coolest things ive seen in my life!!!

@frope01 5 жыл бұрын

Thanks for your effort. This shows very well how the cycle works. Much appreciated.

@povnw8985 5 жыл бұрын

It really helps me to better understand things like this when I can see them. I really enjoy your content. Thanks! 🙋

@waynemaraldo9708 3 жыл бұрын

Thanks for the video man. That was awesome to watch.

@scottjanney3636 3 жыл бұрын

When I was younger my dad had one of these on a rc airplane. Really different engine. It ran really nice

@jasongray797 5 жыл бұрын

Dude.. That's just great. Thank you!!! I could NEVER do this build on my own. Spectacular. GOOD JOB.!!

@177SCmaro 6 жыл бұрын

This is pretty impressive since it's hard enough to get a Wankel to seal with proper metal parts and seals.

@WarpedPerception 6 жыл бұрын

177SCmaro lmao !!! Exactly what I was thinking while I was filming this stuff. That was a good one.

@nelsonc4677 6 жыл бұрын

177SCmaro lol. I chuckled at this. So true

@mujeebrahman3143 Жыл бұрын

Amazing!! a true story. Thanks for the hardwork and the brave shoot

@benduncan3930 3 жыл бұрын

Best explanation of the rotary engine I’ve seen. Very good man.

@aviationworld3858 4 жыл бұрын

That was absolutely amazing to see that engine in action! I always wondered how the heck one of these rotary engines actually works. Thanks so much for sharing this! Very informative!

@devoso2156 5 жыл бұрын

Good on you mate! It's always good to learn something new. Thanks and good luck.

@wilhelmsimmonds4775 Жыл бұрын

As an student of mechanical engineering, I'm very delighted by your great video and being able to see this quality of detail! And see so close a rotor engine after learning about the use Mazda gave to it on their 787B

@alcs999 Жыл бұрын

Do you live in America ?

@edwynamckee8131 3 жыл бұрын

Decades ago, my eccentric ME student boyfriend told me about this strange contraption, the Wankel (or vhan-kuhl, as he said it). The affair ended but decades later, I happened upon your video. VERY, VERY COOL😏 Thank-you!!

@michaelwilkens7164 6 жыл бұрын

You won a new subscriber. Well done on this video. Love it

@russellpoyner9362 6 жыл бұрын

Holy shit that was cool! I try not to swear in comments, but I couldn't help it. I knew the concept of a rotary engine, but that was it. Now I truly know how they work.

@timparker3272 3 жыл бұрын

Pretty Wild!!!! I’ve always loved this concept!!!!

@nickfanthorpe8500 Жыл бұрын

I only found your channel 72 hours ago, I'm hooked, love the see through jet engine

@midobibo9286 5 жыл бұрын

I really like the way you explaining. Nice video helped me a lot. Thanks

@jeffsmelzer9092 6 жыл бұрын

Dude you are KILLING it ! Keep up the best Channel on KZfaq!

@oddjobbob8742 Жыл бұрын

When it fires correctly you can see the flame ignite at the glow plug and propagate into the increasing volume of the combustion chamber. Very informative.