Semi-Automatic Threading to a Shoulder

Рет қаралды 3,646

5 ай бұрын

Using the automatic threading stop and auto-retract threading tool on a South Bend Heavy 10L. With apologies for the focus, my phone isn't as good as my camera.
• Automatic Threading St...

Пікірлер: 13

@jeffanderson4979 5 ай бұрын

That’s pretty slick Craig.

@phineasj.whoopee3301 5 ай бұрын

Thanks Jeff, I must admit I was pretty nervous at the start.

@cdrive5757 5 ай бұрын

Note: I made the statements below prior to clicking on your avatar. I should have done that first because you have better angles already recorded. *GOOD STUFF!!!* I watched this video repeatedly. I even slowed the player down to .25 speed. Neither helped much because you never changed the camera view. Your automation eliminates the classic relief groove needed at the shoulder of the thread.... Brilliant! I also watched your other video with the automatic half nut release. Your mechanisms are damn CLEVER but please give us more views of these mechanisms doing their thing! Some explanations wouldn't hurt either. Thanks from a new subscriber ...Wakodahatchee Chris

@phineasj.whoopee3301 5 ай бұрын

Thanks so much! See if this thread helps. www.hobby-machinist.com/threads/automatic-threading-stop-on-sb-heavy-10.100285/

@MF-ml8eh 4 ай бұрын

Like A Boss Mr. Whoopee!

@f.hababorbitz 5 ай бұрын

Is that a flat I'm seeing on the eccentric cam when it's in the retracted position?

@phineasj.whoopee3301 5 ай бұрын

Detent

@charlescastiglione6469 5 ай бұрын

What is stopping the carriage feed?

@phineasj.whoopee3301 5 ай бұрын

kzfaq.info/get/bejne/bZx7rNd5q-CbYYU.html

@doctorbill6301 5 ай бұрын

Two times would have been sufficient ! Where, how this switch ?

@randomidiot8142 3 ай бұрын

Cam

@emijoandrew382 2 ай бұрын

The thread depth towards the shoulder seem shallow and are not to thread depth. in my opinion its due to the retraction of the spring. and educative content.Thanks Alot

@phineasj.whoopee3301 2 ай бұрын

This thread was not completed, you can tell by the width of the crest. it was just for demonstration purposes.