Feed the algorithm, I wanna see more lexi videos!

I love these electrical videos, so much to learn on each project

You are amazing, Girl!

Damn this girl is pretty good and works hard

Journeyman, ATX. Absolutely phenomenal work. Keep it up. I take this game, so I can sprinkle some game on my COs whenever I can. God bless

Badass

Thank you for sharing. Great example of having to make adjustments in our schedules to accommodate clients.

Amazing video thank you again!

Look forward to the additional content you will post on this job. Enjoy your weekend.

Love it Thanks for sharing!

I admire your work ethic and attention to detail of making sure things are done correctly. Keep on being an icon for people to follow.

Love your videos I love your videos and you're right about doing trades

Hello Lexi, I've watched all your video posts here and I'm extremely enthusiastic about what you're doing. And above all, I am of the clear opinion that you are quite an inspiration for many girls and young women, at some point in the job you are working in the job. !!!

Am really enjoying this video,I like how you do your work.

From my experience it's rarely the breaker but I keep hoping!

Nice work.

Damn busy day but a great video

Great job lex nice to see a good job well done.

This is a great video!

#2:58: First making insolation resistance tests, continuity test etc. when a breaker behaves like this might be a good idea. Especially when RCD / GCFI breakers are involved.

Really enjoy your vids

Ahhh its nice to know other people also have waaay to much to fit into one day ! Its great to see sparkys getting their hands dirty. Theres too many clean electricians these days 😆 Keep the videos coming please.

Great job!

Very impressive!

I want to become a electrician and your videos are making me want to do it even more then I did before finding your channel

Good work and looking lovely lady 💜

I’d break shot just to have a reason to call her lol what a beauty!

wow ya had a busy day time to relax its the weekend

Nice work lexi I'm in an industrial environment so when I see a tripped breaker I always ohm it out first before I try and renergize just a good rule of thumb. I guess

Good work and looking lovely lady🌹🌹

Reporting audiense from Cuba😊, love your videos realy straigt to work and instructionals. I am an electrician too. Sorry if my english isent the best, I m doing my best to show apresiation Thanks a lot 😊

Algorithm, you’re alright in my book

Another great vid. What kind of gloves do you wear?

I enjoyed the video Lexi this was fun to watch

I had never used cold shrink until I did some high voltage a few years back. We did a bitcoin mining site at a coal fired power plant. 2- 3000 amp breakers @13.8kv. It was fun to learn new stuff! It is a pain unless you get lucky and can just pull the tab. Only had that a few times. Usually, it's around and around the wire!

Parabéns! Lexi, pelo seu excelente trabalho gostei 👍

Great example of a good person. Keep it up!

Good work mam

Comment for the algorithm.

👌

I had a Roto Hammer that was passed around to all my buddies who were too cheap to buy one. We called it The Rambo.

❄️👍🇺🇸💪 nice work

👍

More big project vids please! PPE is your friend Lexi.😂

Those damn hammer drills,lol.

You made your company so much money🎉

Hey Lexi love your videos also love seeing women in the workplace,where are u licensed at?

3:48 Thats a monster drill!

If you or anyone else ever need to make a slot in a floor with a hole saw and it's say five holes, drill them in the order 1-3-5-2-4 so the two final holes are balanced.

Wow. What a big drill. 😮

LeX your to funny

Muito bom parabéns guerreira

Hopefully it was a profitable day as well!

Re worn out bit:any of us forget to calculate in the cost of some tools naturally wearing out quickly (abrasive cutters/bits, etc). They're only good for 10-20 jobs.

You almost inspire me to work as an electrician gain, but I then remembered how much I hated working in construction. Glad you enjoy! We need more well rounded people like yourself in the trade.

10/10

interesting day

You are very pretty 😍

Out of all the trades, what made you pick electrician? I’m a Facility and Maintenance supervisor and like to understand what drives people in certain directions to share with my team members who may be interested in one trade over another.

Love the vids.. quick question; do you have to ask your customers to film at their sites? I’m in HVAC and have wondered about this.

Aye

Feeding algorithm 😊

Its so weird you do utility side stuff. Where I am we dont touch anything past the lugs on the load side of the meter

Ditch the sawzaw and get a bandsaw, its become my favorite tool for cutting pipe, unistrut, conduit, etc.

Most of the video was really nice, but I have to complain for the murdering of that holesaw and drill combo. Check the recommended rpm:s! Pretty sure you're going 10x faster than you should. It's just a bit harder for your hands to go slower, but you won't burn the holesaw and the drill while doing it. And it might actually save time, if you stop to brush the holesaws teeth about every time it has advanced by about the length of the teeth, so there would be space for the stuff to go again. And the drill probably came with a handle, so if there's room to use it, these bigger holesaws are the reason to use it. And yes, there are times when I go f#ck it and blast through with max speed, but woods, especially particle board and plywood just want the slow treatment and teeth brushing. Also removing the drilled core from the cup is usually faster to do by removing the sawcup from the centerdrill chuck (or wtf it's called in English, not my first language). Ps. I didn't realize on the first watch that later there were that bigger thing driving the holesaw. That probably won't go even close to those rpms the small drill does, so there's the first clue.

4:36 - what does the guy in the background say?

I love you 💓

Look like 208 system

What a woman.

Being an electrician in your parts of the world seems to be part time plumbing compared to where I’m from

Sounds like the folks at the radiology place is having a rough day... Not sure what's going on

Try using an angle grinder in tight spots.

How awesome it would b to have a girlfriend like you, in the same career as myself! 👍💕😘

Also, it’s hard to hear you with audio on. Try muting the video when you’re talking. It’d be way nicer in my end.

Been in MRI service for 33 years, it will be interesting to see what they are installing.

Those safety glasses go over your eyes, not on your hat. Don't learn that lesson the hard way like some people do. It's too late then.

Holy crap that's the biggest hole hog /whatever it is I've seen, if that thing hooks suddenly watch out for your wrists! Badass chick! Keep blue collar alive, the sissy millennials are afraid to get dirty and work for a living. Take hold of this time to change your life like she did. All the trades are great right now because no one wants to do them and the old timers are leaving. Welder and concrete pumper from Orange County, CA. Peace and make that money 🤘

Damn, it! I was “like” six sixty five! Fuuuck! I should have took it off and waited ten seconds, just to get like SIX SIXTY SIX,🤣Just kidding! It’s just satisfying to have numerical synchronicity, cuz human brains work that way, and unfortunately I’m a human type humanoid. Anyway….guess I’ll have to re-watch this, cuz I spent the entire time typing this inane comment. Still, I don’t do electric, I am very wary of electric, especially if I’m in a tree next to bare hi-lines. I just like seeing incredible work, especially if it’s from a female leaving most males in the dust!🌿🌸

I really enjoy your videos, but do you always have to curse? Some of us really don't want to hear that. But very good videos though.

Where glasses. Your young you’ll want those eyes for a long time.

Drill slower and the bit will last longer.

Love you

Why doesn’t she make videos showing us her Starbucks drink or one about her cute phone case. Or even a tiktok dance??