Service Tech Life #3: NAC troubleshooting
Рет қаралды 5,960
Күн бұрынIn this episode, I describe the method of using voltage to determine the status of a NAC circuit.
@TheBajanTraveller 2 ай бұрын
Thanks for your channel sir , keep the great content up!
@TheThebigcheeze 4 жыл бұрын
You should Meter the NAC while it's Disconnected from the panel.
@servicetechlife4493 4 жыл бұрын
Why?
@liam0748 Жыл бұрын
I have to try your method, seem to cut time drastically
@XandoFootball 10 ай бұрын
If you wanted to demo the nac circuit completely, would you need to deprogram at the panel first then tear it out
@IsaacCoverstone 10 ай бұрын
You would need to find the end of line resistor and place it across the terminals for that circuit, then the wire can be removed if needed.
@XandoFootball 10 ай бұрын
Couldnt they just kill the circuit at the panel and then let us remove the circuit and devices?@@IsaacCoverstone
@Scoobydoobie208 Жыл бұрын
How would this apply to SLC devices if it isn't too much trouble could you elaborate on that please
@IsaacCoverstone Жыл бұрын
@Joseph Williams with SLC, it isn't really necessary to troubleshoot this way, since the panel knows the status of all the devices. The reason you troubleshoot NACs this way is because they aren't smart devices.
Ansari29
Рет қаралды 3,9 М.
Joe Klochan
Рет қаралды 16 М.