My man! Thank you sir! Much appreciated and respected 🙏 I love all your rc4wd D11 bulldozer dxr2 videos 📹 😁🤔😎💯💪🤘✌️👏🤝🤝👊🤜🤛👌👍👍👍👍👍👍👍👍.
@awesomusmaximus37668 ай бұрын
I'm upgrading my stock under seat 1.5 "speaker to a 3.5 inch driver with a bass reflex enclosure I'm impressed by the results so far
@awesomusmaximus37667 ай бұрын
ttps://kzfaq.info/get/bejne/mMd_hK500KfepYk.html
@ronlaabs9784 Жыл бұрын
Thanks for the information. Conot find the ESC but will keep looking
@seansrcconstruction8 ай бұрын
Awesome man really well explained
@yellowironcowboyrccon74848 ай бұрын
Thanks im glad this video helped you out.. Thanks for watching
@mw697113 жыл бұрын
Nice Video .. You are right there are not that many videos' on this on how to..
@rcscalebuilders82683 жыл бұрын
Oh Man I want my Dozer so bad. I didnt realize that RC4WD drop shipped them from china so ive been waiting almost a month already. Thanks again for the detailed setup instructions. I have a beier sound/light module i was going to put in the dozer but once i watched this video a few weeks ago and heard that clackety clack i had to get the SMR .
@yellowironcowboyrccon74843 жыл бұрын
Yeah it makes it as realistic as it can get! It also kinda drowns out that noisy hyd. Pump lol plus it makes hydrolic sounds. You will be glad you got the good stuff for sure.
@terryperrott99133 жыл бұрын
@@yellowironcowboyrccon7484 When I get mine 2 things im going to change . 1st one is relocate ' pump ' from the rear because the dust / dirt not good for the brushless motor for the pump , & 2 I do believe that csmc has metal tracks because the factory ones are alluimuim. Keep an eye out on the trak pins...
@pnwRC.4 жыл бұрын
Great tutorial video!
@madmot2tv5043 жыл бұрын
Just found ya I have lots of questions? Thanks great video very informative
@yellowironcowboyrccon74843 жыл бұрын
Ask away I'll try to answer what I know
@Rcheavyequipment4 жыл бұрын
very nice man you can check my dozer with the sound i installed too
@scottharris64232 жыл бұрын
Big shout out for sharing!!!!!
@ianyams3 жыл бұрын
Thanks very much 🇬🇧
@yellowironcowboyrccon74843 жыл бұрын
Your welcome! Anytime bud!
@ianyams3 жыл бұрын
@@yellowironcowboyrccon7484 just got a new tracked loader and looking for some sound.........still looking kzfaq.info/get/bejne/Y7Fyp6de3Z--ZGg.html
@ronlaabs9784 Жыл бұрын
I would like to ask you where you purchased the ServoNaut 211 ESC . I do have the ServoNaut sound system. If you can help me out I would appreciate it. I do like your videos and am very jealous of your construction site Keep up the good work Thank ou
@yellowironcowboyrccon7484 Жыл бұрын
I got the servonauts on ebay. There pretty spendy.
@inagerli3 жыл бұрын
the left track is turned.
@tokyorc4Fun Жыл бұрын
Please let me know how you connected both track drive ESCs to the Servonaut's throttle input. It appears there is only one input on the Servonaut for throttle.
@yellowironcowboyrccon7484 Жыл бұрын
My dozer has the stock esc's and are mixed in the radio to work on one stick/gimbal. The servonaut smr is my sound.
@tokyorc4Fun Жыл бұрын
Thank you!
@rcscalebuilders82683 жыл бұрын
Hello Kind Sir Hope you're doing well. I have a question about my DXR2 and figured you probably have a lot of experience with it. I've only got about 3 hours on it and I'm noticing that the left track is riding up on the sprocket. The right track runs butter smooth and is quiet where as the left track seems to be encountering some resistance. Is this just a simple track tightening kind of thing? Please let me know your thoughts. Thank You very much
@yellowironcowboyrccon74843 жыл бұрын
Well you should be able to tell one side from the other. If one side is loose you can adjust it. I ended up removing 1 link on each side and that has pretty much solved all my issues.
@rcscalebuilders82683 жыл бұрын
@@yellowironcowboyrccon7484 Thank You very much for replying to me. I finally found a set screw backing out right on the sprocket which was causing the tracks to jump at that position. Its working now.
@yellowironcowboyrccon74842 жыл бұрын
Is there alot of slop in 1 compared to the other?. If so it just needs adjustment on the tension.
@garyrichardson55753 жыл бұрын
I found the Facebook page but how do I buy the blade from him? I also want the wider tracks
@yellowironcowboyrccon74843 жыл бұрын
Just message him on his Facebook page...
@blackdawgrc84252 жыл бұрын
What's up! Yellowiron cowboy 🤠! Quick question 🤔 for you! How the performance of the servonaut M211??? Do the dual esc over heat, voltage cut-off???? I already purchased servonaut smr! Now! I'm going to buy the servonaut smb for the rc4wd excavator 360L and servonaut M211 dual esc! Your professional feedback is always appreciated 👊🤜🤛👌🙏
@yellowironcowboyrccon74842 жыл бұрын
Is the dual esc for the dozer? If so you don't need it you can do mixing for 1 stick track control with the stock esc's.
@yellowironcowboyrccon74842 жыл бұрын
To learn the mixing look up Bob on hobby concepts he has a very detailed vedio on how its done
@blackdawgrc84252 жыл бұрын
@@yellowironcowboyrccon7484 ohhh okay my man! Thank you sir 🙏 I really appreciate it as always 🙏.
@The-Warm-voice13594 жыл бұрын
beautiful video man and excellent ballduzer so bro i want your help can you please tell me how can adjust my radio control on my battery 3s because i have same this radio FS 10ch white on my rc earth mover 870k he cannot reading my 3s voltage when my battery is low even the alarm not work 2 i think she needs adjust from battery settings RX let me know if you knows thx bud wonderful channal
@yellowironcowboyrccon74844 жыл бұрын
Well i haven't encountered that issue before, so i really have no advice on that issue. I use one of those meters that you plug into the balance lead on the battery, when it gets low it starts beeping....
@The-Warm-voice13594 жыл бұрын
@@yellowironcowboyrccon7484 can you tell me how can do that or can you say what is your RX adjustment thx again bud
@garyrichardson55753 жыл бұрын
Where did you get the brush guard for your front blade? I have been searching for one for my dozer.
@yellowironcowboyrccon74843 жыл бұрын
Look closely because that whole blade is new! The brush guard comes on the blade. On Facebook Look up rc construction projects. The guys name is Tommy he's in Australia the dozer blade is approximately 1000 dilevererd...
@garyrichardson55753 жыл бұрын
@@yellowironcowboyrccon7484 thank you. Will do.
@leonardrayner41263 жыл бұрын
Where did you buy this dozer from and model is it because IM trying to look for one
@yellowironcowboyrccon74843 жыл бұрын
Rc4wd.com
@Maxlimitrcs2 жыл бұрын
This is a JDM dozer.. Rc4wd buys them in bulk from the JDM manufacturers in China.. NOT a RC4WD build
@yellowironcowboyrccon74842 жыл бұрын
I didn't know that at the time of the vedio. I have since learned alot!..........