Set a Custom Fan Curve on your GPU to Reduce Temperature and Noise

No video

Set a Custom Fan Curve on your GPU to Reduce Temperature and Noise - Tutorial

Рет қаралды 57,668

ImWateringPSUs

Күн бұрын

Пікірлер: 131

@harrisonennis1206 Жыл бұрын

Thank you for the guide. I used this video and your undervolting videos on my zotac 3060 ti and my gpu rarely hits 70 degrees Celsius now and it doesn't sound like a jet engine anymore.

@ImWateringPSUs 11 ай бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback! :) I’ve also got a few build videos on the channel and more coming, if you like the content consider subscribing as it really helps me a lot!

@w0lart1 11 ай бұрын

My coller in a brand new rtx 3060 asus dual is making rattle noise at 78 to 81% so i undervolt in with your previous guide and make flat curve to 64-80C to 76% and it works flawless, thank god that earth got ppl like you🙏

@ImWateringPSUs 11 ай бұрын

@sweettangoTIMMY 8 ай бұрын

Simple, straight to the point, and with room to play around with. Thanks!

@ImWateringPSUs 8 ай бұрын

Glad it was helpful, really!

@Jinars. 7 ай бұрын

This is insane. I've followed your undervolting guide and this guide and I'm getting 80-100 fps on RE4 Remake with 77C whereas before following your guides I was getting 60-80 fps with 83C. I wish I discovered your guides sooner when I was playing RDR2 lol. Thanks a lot!

@ImWateringPSUs 5 ай бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel!

@PenguinsAreColdish 2 ай бұрын

gaining 20 average fps from undervolting doesn't sound right

@raiden_131 10 ай бұрын

thanks for the vid bro, im using that curve for my 4090 and it is so good!

@ImWateringPSUs 10 ай бұрын

@enricoramirez5223 Жыл бұрын

Always Something new to learn on your Chanel ❤

@ImWateringPSUs Жыл бұрын

You're way too kind my man :)

@enricoramirez5223 Жыл бұрын

@@ImWateringPSUs i Love how your Chanel rises 💪💪💪now U have 5300 subs.

@scaryL0L 10 ай бұрын

Hey! I followed this guide and your undervolting guide and I am impressed. My 3090 Ti FE runs so cool now with no performance loss at all. My GPU is yet to go over 55c and I have been running games like Cyberpunk and Baldurs gate 3 all on ultra settings. I do have a question though, so when my GPU is a temp between 30c and 55c the fans operate at 800 RPM, but when the GPU is 55c it doubles to 1600 RPM. I am curious if this could possibly have an effect on the life of my GPU or the fans. I will also mention that sometimes it bounces between 800 RPM and 1600 RPM because the card will go from 54c to 55c back to 54c and so on. But overall I am satisfied and yet to see 60c on any game just worried a bit about the fans.

@ImWateringPSUs 10 ай бұрын

@TheEasyk 7 ай бұрын

You can set the hysteresis for the last problem youve mentioned! I recommend 10 °C. so when it reaches 55°C, it will run 1600rpm until the temp goes down by hysteresis amount, so in t his case 45°C. This will stop fluctuating speeds and lessen the wear of the fan

@A.Sostan 6 ай бұрын

⁠@@TheEasykwish there was some visual on how u set that hysteresis..

@aigisandersen9755 3 ай бұрын

Soo when i was playing Valorant my GPU fan speed sometimes increased constantly and then decreased again, is that normal? I'm using GTX 1660 Super and followed the exact setup like in your video.

@Processss_ 11 ай бұрын

Gracias italia!! Tus videos son buenisimos

@ImWateringPSUs 11 ай бұрын

@DirkCleiren 24 күн бұрын

Thanks good tutorial (again) :)

@povilasgrakas8810 19 күн бұрын

this curve on most cards like stay near airplain :D better use fan control apps for all fan control, and make them push air depending cpu/gpu mixed graph more air to case less temp gpu plus less sound if using good fans

@alexencar 11 ай бұрын

Thank you man very helpful

@ImWateringPSUs 11 ай бұрын

@hache_ 5 ай бұрын

love your tutorials man, the ryzen 7 5800x one saved me and i was wondering if you'll eventualy do a undervolting tutorial for the rx 7800xt

@ImWateringPSUs 4 ай бұрын

Thanks a lot for the comment! Yessir I’ll do it as soon as I manage to get one of them for a decent price, consider subscribing if you don’t wanna miss it :)

@Silent-1983 10 ай бұрын

Thank You! The 4000 series is very well cooled, I test with the 4080, 55% fan speed is more than enough, I never see 60 degrees Celsius. The 4070TI has lower wattage and I think the 60% fan speed is too high, I only recommend if you have terrible case airflow.

@ImWateringPSUs 10 ай бұрын

@GianlucaPeleggi 5 ай бұрын

grandissimo video, vedo che sei italiano e ti faccio i complimenti anche per l'ottimo inglese.

@ImWateringPSUs 5 ай бұрын

Grazie mille!

@nickabbott319 5 ай бұрын

Damn this dude the goat!

@ImWateringPSUs 5 ай бұрын

Ahahaha my man! Be sure to subscribe to the channel :)

@tuuevccDatDood1 Ай бұрын

somehow by trying this tutorial while gaming my temps went up from 45 degrees to 57 degrees and at idle my temps went from 31 degrees to 47 degrees

@r26ix 9 ай бұрын

Thank you for the video

@ImWateringPSUs 8 ай бұрын

Thank you for commeting!

@strawnium6366 Ай бұрын

why is it not good to make your fan fanless at idle?

@Later2u 4 ай бұрын

Thanks for the video. I tried the 4 node profile you suggested. Tried to save to card. It said it could only do a 3 node save. I did that and it took it. Now, if I wanted to try a 4 node with AB running, how would I reset the to the four node option. It went away doing the 3 node. Anyway, good info. I have some control of the fan speed.

@NeverGiveUpz Жыл бұрын

I have a Strix 4090 OC and also have the line that doesn't allow the fan speed to ever be completely off, BUT I set mine at ZERO regardless and if my cards under 35c it will actually not have the fans running at all - Also as for you not recommending doesn't really, almost objectively make any sense, 30% fan speed for hours a day potentially is only going to cause the fans to wear quicker. My GPU at idle stays between 28-35c MAX! For doing anything other than gaming, such as browsing the web, watching youtube videos, twitch etc. With that said, having ZERO RPM is objectively the better option

@ImWateringPSUs 10 ай бұрын

I definitely see your point and in GPUs with massive heatsinks that’s actually a very good choice! Be careful with doing it on lower end GPUs with no VRM/MOSfets heatsinks because you do need to cool these with some airflow

@manuelmuster2956 10 ай бұрын

"BUT I set mine at ZERO regardless and if my cards under 35c it will actually not have the fans running at all" Same here with the 4080 MSI Ventus, as I also prefer the fans completely off at low temperatures. I have the issue though that I want to fans to stay off also at a higher temperature, let´s say still off below 60 degrees - I changed the curve accordingly in Afterburner, but it seems it´s not being considered. Any idea how to fix that?

@whynahflexin3639 6 ай бұрын

@itsdistinctlyare you sure? I just don't really understand these things

@MueedVI 11 ай бұрын

What should be the maximum fan rpm at around 75C? I usually set the fan speed at 65% (2400rpm) when I'm gaming. The stock fan curve is weird on my RTX 2060. Max RPM i noticed was 1800rpm which causes the temperatures to hit 84 (not undervolted) and 76 (undervolted 900mv) on full load.

@ImWateringPSUs 11 ай бұрын

Really it depends on the fan itself. I’d say 60-70% is very good, RPM aside!

@Mick-hp4yg 4 ай бұрын

At 30% (lowest my GPU can go) my fan rpm is 1780-1800. It's loud as hell and it's driving me insane. Some people I've spoken to say their fans can go as low as 900 rpm on the lowest percentage. Is my GPU faulty or something?

@skyx1128388 3 ай бұрын

manual adjust the fan speed won't cause the chip overheat? cause the fan speed is not in natural mode, not auto let the fan speed adjust itself better even though loud? Gaming in 60 FPS fan speed won't go loud unless disable vsync in game setting for make it higher fps.. high fps the card increase fan speed RPM. If the pc for working or browser only, don't have to bother adjust the fan speed. it won't go high at all..new graphic card, new technology, fan speed 0 RPM

@FiveStarBr Жыл бұрын

thanks for the guide man very helpful, my msi gpu has this zero frozr tech where it runs fanless unless it gets up to 60c its very dumb i always want my fan on so it stays cool TY

@ImWateringPSUs Жыл бұрын

Glad it was helpful, thanks a lot for the comment :)

@vk45dett 7 ай бұрын

Nice vid ! So afterburner needs to be on everytime inorder for the fan settings to work ? Or can you save and close it and it will still be activated ?

@ImWateringPSUs 7 ай бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel! Yes afterbrner needs to start with windows: but it’s very light don’t worry

@rainyday13 2 ай бұрын

There is no fan tab on mine.

@Aditya-zj2bl 2 ай бұрын

Why cant i use the fan seetings on my rog laptop please help

@_shafu_ 2 күн бұрын

It’s grayed for me :(

@kosonennz 10 ай бұрын

In cs2 while i play my fans chances in between 60% and 80% so much. Like it is 60% then goes 80% for like 10-20seconds and then back to 60%. So does it harm my fans or gpu or is it just good???

@ImWateringPSUs 10 ай бұрын

I'd say try to put it to 70%, maybe it will stay stable, for noise. But no, it's not gonna damage thee fans

@kosonennz 10 ай бұрын

@@ImWateringPSUs okay u mean 80 to 70 or 60 to 70?

@DarkKnight-lh4gr Ай бұрын

Will this damage my fans and also will this reduce temps in heaven benchmark

@A.Sostan 6 ай бұрын

So checking the box that says “firmware control mode” will basically save your profile so you don’t constantly have to run msi afterburner at startup or while playing games? Does this also work for the undervolting settings as well?

@ImWateringPSUs 5 ай бұрын

Correct and correct again :) Also consider dropping a like and a sub!

@clevertaco328 5 ай бұрын

You give a curve and then at the end change it. Why? Why not stick to one thing at a time instead of switching it up? Might confuse those new to F curves.

@ImWateringPSUs 5 ай бұрын

I understand, but I am basically recommending a curve and then showing how you can change it if you want

@djrain1555 5 ай бұрын

when i try to use "use firmware control mode" it puts my gpu at max fan speed, sometimes even going over 100, so i guess it doesnt work for my gpu, ill just have to be starting the app with windows n minimized right?, i got a Gigabyte Rx 6600 Eagle n i want my gpu to always be at 55 fan speed but go all the way up to 80 is there a way i could have it start with windows but for it to not start the on screen display

@ImWateringPSUs 5 ай бұрын

Yay that’s unlucky but the firmware control mode doesn’t work with all cards. Yessir, start with windows and start minimized :) Consider subscribing to the channel if the vid was helpful!

@djrain1555 5 ай бұрын

@ImWateringPSUs is there a way to make the fan speed go up by seconds instead of going from like 50% to 60% instantly, I want my gpu to go like 51 52 53 54 all the way up to speed it needs to be, cause I feel like my gpu is gon break if the fans kick up instantly instead of slowly, you know what I'm saying?

@parkx3324 5 ай бұрын

how do i set it back to default when i close after burner my gpu fan doesn’t spin and it used to spin all the time

@ImWateringPSUs 5 ай бұрын

Just disable the curve and hit on the refresh arrow!

@bokolochz 5 ай бұрын

if firmware control change your fan curve settings on your gpu is there a way to reset the firmware fan curve settings back to default or do i just uncheck the firmware control box

@ImWateringPSUs 5 ай бұрын

Yes you can, just uncheck the box :) Oh and subscribing to the channel helps too :p

@3freeet948 5 ай бұрын

Bro before I try this will it work on XFX RS RX 470 4GB Black Edition? My idle temp is like 55°C - 61°C , but when I'm gaming under load it hits as high as 84°C will this tutorial work? I await your response bro, thank you!

@ImWateringPSUs 5 ай бұрын

Yes it will! But only if you subscribe to the channel :p

@h_zero645 Жыл бұрын

i have i gtx 1070 asus turbo when doing nothing the temperature is around 36 to 40 but in gaming for example when i play apex legends temperature jumps all the way to 82 i changed the thermal past added some out take fans but it didn't change much ... i hope you can give me an answer to this problem if you have one nice video btw

@ImWateringPSUs Жыл бұрын

You need to undervolt it, I have a tutorial on the channel

@xLuxSoldi3Rx 9 ай бұрын

How about hysterisis for 40xx series with zero fan for desktop use? Can you do a video with a curve with zero fan and hysterisis enabled? Thx

@ImWateringPSUs 9 ай бұрын

Very good topic. Personally I still use this kind of curve on the 4000 series, obviously it’s possible to set the fans to 0dB

@xLuxSoldi3Rx 9 ай бұрын

@@ImWateringPSUs sure. I have zero fan on until 40c set. But hysterisis is important on 4000series. I have an 4090 and in gamemenus it drops fast under 50c or even my 40c set, and that always turns off the fans into zero rpm. So hysterisis is helping a lot there. But only working properly with a stairs/step curve. Maybe you can experience more on this and share another video 🙏

@romain115 10 ай бұрын

thank you my rtx 3070 gigabyte was so loud on warzone, this is the best tutorial i've seen

@ImWateringPSUs 10 ай бұрын

@joshybangbang183 5 ай бұрын

I'm buying a 2080ti asus turbo cause my 4080 caught fire so I was wondering how to make my temps better

@ImWateringPSUs 5 ай бұрын

I’d recommend you undervolt it, I have a dedicated tutorial in my GPU Undervolting playlist

@ItsBorland Жыл бұрын

Do you think these fan curves would be alright for a GTX 3080 card and help make the fans a bit more quiet?

@ImWateringPSUs Жыл бұрын

Yes, they should help quite a bit! But I’d very much suggest undervolting as well (I have a tutorial on the channel)

@Jakiyyyyy Жыл бұрын

Is it also possible for a laptop though? I tried it but no luck.

@ImWateringPSUs Жыл бұрын

Unfortunately this only works for desktops, for laptops your best bet is to use the software that the manufacturer provides!

@varietygamesisnumberone Жыл бұрын

It s out of the topic,but i still wanna ask.I have a Rx 6600 i have auto clocked it from the amd software,but when I try to play a game my screen flirckers and the core clock and power limit completly change.What could be the reason.

@ImWateringPSUs Жыл бұрын

Unstable settings! I'd recommend to manually undervolt it, I do have a whole playlist about it

@popluciandorin 11 ай бұрын

Can you make a tutorial like this, but with an AMD card? Thx!

@ImWateringPSUs 11 ай бұрын

It works for AMD as well, just download MSI afterburner!

@phucphungtran8520 9 ай бұрын

Guys i have rtx 3080 vulcan and my fan stop function isn't working, the lowest i can set is 30%, anyone knows how to fix this issue ?

@ImWateringPSUs 9 ай бұрын

You might need to reset afterburner, reinstall the drivers and try again, very odd

@Mouse_InBakedBeanz Жыл бұрын

Works with 1660 Thanks

@ImWateringPSUs Жыл бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to write this! :)

@macblink 7 ай бұрын

can't control my fans at all, latest amd drivers yeeted that ability and my gpu fans are still (unless gpu goes above 60°C) it seems no program can turn them on

@ThisLuvee 7 ай бұрын

Can you not adjust your fan curve in the Adrenaline Software?

@macblink 6 ай бұрын

@@ThisLuvee fixed everything by flashing it to a normal rx 6600 👌🏻 (I use a Soyo rx 6600m)

@ImWateringPSUs 5 ай бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel!

@tawkhasdrip9061 8 ай бұрын

couldn't get it to work my fan settings are all greyed out

@ImWateringPSUs 8 ай бұрын

Laptop?

@vahlgala 5 ай бұрын

pc temp went up from 48c to 54c after using this fan curve edit: this is just with my usual browser stuff open

@ImWateringPSUs 5 ай бұрын

I have to ask you, what was your curve before? Also if the problem is just in idle and you don’t mind the noise, just raise the lower part

@t3ngristtt 7 ай бұрын

will you recommend it on 3060ti dual?

@ImWateringPSUs 5 ай бұрын

Yes! But only if you’re subscribed to the channel :)

@takey2376 9 ай бұрын

Bro! I did what you said at 1:50 to save the profile to my gpu, and now the gpu fans stop working entirely, even if it reach 100 degree they stay not spinning, I restart the pc, and unninstalled msi afterburner and still nothing, please help! I heve an rx 580

@ImWateringPSUs 9 ай бұрын

You must have another software interfering. Reinstall the drivers, reinstall afterburner, set it to default and they will work again :)

@takey2376 9 ай бұрын

I reinstalled MSI AB, I uninstalled the GPU drivers with DDU and installed them again, a friend came by and flashed the GPU with fresh bios, I also tried it on another setup, nothing works :(@@ImWateringPSUs

@3freeet948 5 ай бұрын

@@takey2376 Bro did u get it to work?

@takey2376 5 ай бұрын

@@3freeet948 no, I bought a new one, this mf ruined my gpu, and didnt even say sorry

@3freeet948 5 ай бұрын

@takey2376 Damn bro that sucks 😞 sorry to hear that, hence why I asked first if it worked, I didn't want to try and fck up my card. I was getting 84 degree under gaming load when I search and find this video and guess what I did? I repasted the card and not it only go to 68 - 71 degree under gaming load which i think is good.

@ahmedabougabal7589 9 ай бұрын

Would these settings be suitable for a Zotac 3060 Ti?

@ImWateringPSUs 9 ай бұрын

Absolutely yes!

@ahmedabougabal7589 9 ай бұрын

appreciate your help!@@ImWateringPSUs

@levivieira3260 4 ай бұрын

nice vid

@ImWateringPSUs 4 ай бұрын

Thank you!

@arhippaharju8672 Жыл бұрын

the fan option does not exist for me

@ImWateringPSUs Жыл бұрын

Are you on a laptop perhaps? On laptops you are forced to use the manufacturer software unfortunately

@slejer_ 11 ай бұрын

10/10!!!

@ImWateringPSUs 11 ай бұрын

@slejer_ 11 ай бұрын

ofc, subscribed a long time ago! ;;;) @@ImWateringPSUs

@DevilPork92ITA 3 ай бұрын

bravo ragazzo :)

@mathew5x 7 ай бұрын

I’m trying to set the curve, but my idle temp is staying at 70 since that’s what I’ve got it set to on the main screen of the MSI afterburner, but when I go into settings- fan- and then make my chart like yours, the idle should be at 30% fan speed but it’s just staying at the stock 70%. Any help?

@3freeet948 5 ай бұрын

Bro did u figure it out?

@ImWateringPSUs 5 ай бұрын

That’s very odd. Do you have a laptop?

@BikerDrex 4 ай бұрын

So we not gonna talk about the 45 mil ° C the guy had on his gpu?

@ImWateringPSUs 4 ай бұрын

😂😂😂

@Xi_D3M0N-iX 9 ай бұрын

Would this work for rtx 2070?

@ImWateringPSUs 9 ай бұрын

Absolutely yes!

@tegez2226 7 ай бұрын

my gpu fans are extremally loud at above 50 %

@ImWateringPSUs 5 ай бұрын

Weird😅 Adjust the curve accordingly and consider subscribing to the channel!

@lilnico4877 9 ай бұрын

Bro my fan keeps going from 0 rpm to 1000 rpm, making annoying noise like its ramping up and down. Please help me, ive got a asus rog strix gtx 1060 6GB

@ImWateringPSUs 9 ай бұрын

Have you followed the tutorial?