Setting lighting ratios

No video

Setting lighting ratios

Рет қаралды 33,519

Күн бұрын

Setting lighting ratios
______________
📱 SOCIAL:
👩🏻‍🦰 MARISA: / marisa.roper
👓 DANIEL: / danielnortonphotographer
/ danielnorton
_______________________________________
👓 DANIELS GEAR
📸 CAMERA
Nikon Z6II: bit.ly/33bZWrP
Nikon Z6: bit.ly/ONESLOTJR
Nikon Z 24-70 f4 Lens: bit.ly/nIk24704
Nikon Z 85mm 1.8: bit.ly/3zX0zBc
Nikon NIKKOR Z 50mm f/1.8 S Lens: bit.ly/3tsMPwM
⚡️ LIGHTING - FLASH
Profoto Air Remote Nikon: bit.ly/PFAIRNK
Profoto B1x: bit.ly/ProB1X
Profoto B10: bit.ly/3zWTG2M
Profoto A10: bit.ly/3zWgLCV
Chimera Super pro X Lightbank, XS, Shallow, Silver - bit.ly/CMSPSXS
Chimera Pro II Softbox: bit.ly/CHiP2S
Profoto 1x1.3’RFI Softbox: bit.ly/PFRFI113
Profoto 3’ Octa Softbox: bit.ly/PFRFIO3
Profoto 1x3 Strip OCF Softbox: bit.ly/pf1x3ocf
Profoto 2x3 Softbox: bit.ly/3GuhMEN
Profoto Magnum Reflector: bit.ly/PMgnR
Profoto Beauty Dish (silver): bit.ly/3I4J3hh
Grid for Profoto Beauty Dish: bit.ly/33e5q5l
💡 LIGHTING - CONSTANT
Dedolight 200w HMI kit: bit.ly/3FvuAcB
Dedolight Turbo Series DLED7 90W Bi-Color Focusing LED: bit.ly/3fpOPxM
Dedolight Iris: bit.ly/3I3TC45
Dedolight 150 tungsten kit with projector: bit.ly/3K9sse5
Dedolight Projection Attachment: bit.ly/3Fx46HA
Dedolight 400 HMI Kit: bit.ly/31XcQsO
Savage Rainbow Ringlight: bit.ly/SARRL
Nanlight Pavotube 6C: bit.ly/3mRCDdc
🪜 STUDIO GRIP AND SUPPORT
Manfrotto 055 Tripod: bit.ly/2PDOkqr
Manfrotto Hydrostatic Ball Head: bit.ly/MHSBH
V Flat: bit.ly/3Kc6bfJ
Halo Compact Reflector: bit.ly/3riwpoj
Matthews C- Stand: bit.ly/MTCstandC
Magic Finger: bit.ly/magfinger
Large Manfrotto Stand: bit.ly/3rfWQuN
Duvetyne: bit.ly/TheDuve
👨🏻‍💻 TETHERING
MacBook Pro: bit.ly/321OHS4
Tether Tools USB-C to USB-C: bit.ly/3rhV4t4
🎥 VIDEO PRODUCTION
Nikon Z6: bit.ly/ONESLOTJR
Nikon Z 24-70 f4 Lens: bit.ly/nIk24704
Nikon Z50 Mirrorless Camera with NIKKOR Z DX 16-50mm f/3.5-6.3 VR Lens: bit.ly/3Fuwo5J
Rode Microphones Wireless GO II Compact Microphone System with 2x Transmitters and 1x Receiver: bit.ly/3KnPBtB
Apple iPad Pro 12.9" M1 Chip, Wi-Fi, 256GB, Space Gray, Mid 2021: bit.ly/33c1sKt
Atomos Ninja V recorder: bit.ly/3ttLPc2
___________
If you’d like to help out the channel consider following these affiliate links before you make purchases:
Adorama: www.adorama.com...
Amazon: amzn.to/2Xnxtdy
#dnphoto #lightingbasics #danielnortonphotographer

Пікірлер: 64

@danieljackson654 Ай бұрын

How wonderful is Marisa's attitude. Bravo.

@MikeJamesMedia Жыл бұрын

You two make a great team. Daniel shooting excellent photos and giving precise technical information, and Marisa, assuming any number of roles, depending on the scene, while also being "ham-o-matic" in the background. When something is fun, like your shoots, it makes the technical info much easier to absorb. (for me, anyway) Love you both!

@Drinckx2 Жыл бұрын

Thanks for the post: great info for anyone using active fill-in. With the fill 3 stops below key, that would be a 1:8 ratio. As it is also common to position your fill on-axis, it’s useful to mention that the fill will be adding light to the key as well as the shadow; not much if 1:8, but quite substantially at 1:2. TTL may take care of that, but on manual, you might want to reduce the overall exposure to compensate (while maintaining the desired ratio difference).

@tweed0929 Жыл бұрын

Your attitude is great. No filler speak, right on point, short, all-in-all nice tutorial. Glad that KZfaq notification popped up your channel in my feed.

@1BigBucks1 Жыл бұрын

Marisa's Robot! 🤖🔥

@ggarciacota 5 ай бұрын

Great video Daniel!! Very clear and simple explanation. Great model too. Thank you so much for making it and sharing.

@jimgsewell Жыл бұрын

Love you Daniel, and I always learn so much from you, but 2 stops is 1:4. If your main light is 100 units bright and you reduce your fill by 1 stop to 50 units, then reduce it one more stop (for a total of 2 stops) it is now only 25 units bright. You are the professional, so pro photographers may call that 1:3, but mathematically it is 100:25 or 1:4. Hope your holidays are wonderful.

@harpenfluit Жыл бұрын

You are right. A 4:1 ratio is a 2-stop difference from the highlight side to the shadow side of the face. 3:1 ratio = 1.5 stops. 8:1 = 3 stops brighter.

@MichaelChapmanVisuals Жыл бұрын

Exactly.

@peaceisnice Жыл бұрын

Ha! Not only was that very informative, Daniel (I had no idea TTL was a workable option for multi-strobe shoots) but Marisa was hilariously entertaining.

@H82Miss Жыл бұрын

That was helpful. Thanks Daniel. Merry Christmas to you both.

@patricktueth2637 Жыл бұрын

Learned lighting via ratios way back when. Great nuts & bolts explanation of how its done. You made the process very easy to grasp. Loved the tip on using a larger fill source size. Thanks.

@michaelspain7621 Жыл бұрын

Great & simple demonstration on the approach to key lighting. I was glad you showed using TTL as well as manual, it made it more understandable for us beginners

@charleyl264 Жыл бұрын

That's a great tip, Daniel. Thank you and Marissa. Have a great holiday.

@josephchan4198 Жыл бұрын

Awesome!! Thanks for having the class. Happy Holidays. See you next year!

@sbai4319 Жыл бұрын

Merry Christmas and thanks Daniel and Marissa! 🎊 🎉

@KevinRusso Жыл бұрын

I don't do the ratio thing either, but I have found over the years that I like my fill light to add 3 tenths of a stop to the overall exposure. So If I want my main light set to 5.6 with a meter and I need to add a fill light, I just keep adjusting the fill light to I get a combined exposure of 5.6 and 3 tenths. I can then either choose to work at 6.3 or dial both lights down using the software that will drop both lights together down till my meter reads 5.6 again.

@ShaneBaker Жыл бұрын

Thanks Daniel and Marisa for this video and indeed, all this year's videos. I always learn something!! Season's greetings to you both.

@michaelschmitt5413 Жыл бұрын

Another helpful video. I like something like a 1:2 or 1:3 ratio. But to be honest, I tend to be less intentional. Moving forward, I'm going to be more intentional.

@alexanderbocker9649 Жыл бұрын

Great video and a nice tip with the fill being bigger then the key light. The ratios are a good starting point, but unless the modifier is the same size and the distances between the modifiers are exactly the same, the ratios are off right from the start. Anyways a great video, subscribed!

@DanielNortonPhotographer Жыл бұрын

Indeed, unless you are using TTL which measures the amount of light and thus compensates for the difference

@chuckmower Жыл бұрын

Thank you, this helped me clear up some of the problems I was having with getting look I have in my head when I shoot portraits now. Something just clicked after watching this one. 🙂

@DanielNortonPhotographer Жыл бұрын

Excellent!

@250GTOAJ Жыл бұрын

Good and useful information, Thanks Daniel and Marisa 😎👍🇨🇦🎄

@charliegreen1989 Жыл бұрын

Great video Daniel. I’ve only just started to play about with an active fill but like it 2-3 stops under key. Will try the TTL way and see how it comes out as it’s a lot quicker method.

@thomastuorto9929 Жыл бұрын

I agree, great vid. Like you just starting to play with flash. Watching this guy for a while now & only seen adjust on the fly sort of. I’ve done exposure comp with a 1 light set up &ttl but, So good info. I guess their is some kind of lighting ratio formula sheet somewhere? Y/N?

@alexanderpons9246 Жыл бұрын

By accident I 've done it the way Seth does it(near lens/bare bulb) but using a larger modifier is better over all. Like always great information and key points to improve our game, thank you Daniel Norton.

@sandbilly100 6 ай бұрын

Thanks, crisp and to the point.

@younicbic Жыл бұрын

Precious advices as always, merry Christmas you all

@winni223 Жыл бұрын

Nice addition to the recent video on separation light

@jakobhovman Жыл бұрын

Thank You for another workflow demo. I used 2 flash units in the same umbrella...Switching on 1 or 2units, gave me a manual half/duble setting Can easily be extended to 4 units...!...Worst case: Use Christmas Tree as fill...! Winter Solstice Greetings to you both...!

@EdwardKilner Жыл бұрын

TTL is very helpful in setting lighting ratios. It should allow the lights to be adjusted in distance independently, because it controls the amount of light output from each light. So, you can easily increase or decrease the power by full or partial stops as required. You really love transferring the TTL result to memory and going manual from there. Never knew why until you said today your controller only allows minus 2 stops max. My controller allows a max of 3 TTL flashes, all I have.

@petercdejong Жыл бұрын

Thank you! Please more like this!!

@GilbertTV Жыл бұрын

great video & information.. thanks Daniel & all the best for Christmas & new year

@jerryrichards8172 Жыл бұрын

Fantastic Thank you

@jamesrussell1967 Жыл бұрын

Great video!! Merry Christmas to both of you!!

@sols9449 Жыл бұрын

Great video. I do this all the time I just didn’t know what to call it Ha. I’ll also use a bigger light source and just move it back more.

@lighthackerslimited Жыл бұрын

Perfect explanation

@antares2112L Жыл бұрын

surprisingly, when you meter direct sun light and shadow light outdoors, you end up with 3 stops of difference, pretty natural 👍

@photoquent Жыл бұрын

Really interesting and very helpful. Would be great if you had an overhead camera to give a better idea of light positions. Have a great Christmas and New Year and thank you for all of the truly amazing content in 2022.

@cotswoldphotographers Жыл бұрын

Happy Christmas everyone 🎄🎅🏼

@daemon1143 Жыл бұрын

Nice, thanks for that. I don't often do human portraits and when I do I'm unimpressed with my results, but this will help.

@RS-Amsterdam Жыл бұрын

Yo da man ! Like always .

@stupendously_creative Жыл бұрын

Love your videos

@DanielNortonPhotographer Жыл бұрын

Thanks!

@DJCENTIF1 Жыл бұрын

Great as usual

@overheadcam63 7 ай бұрын

Perfect. Just what I wanted to know. And yeah, I saw Seth do his voodoo magic with on camera fill. He makes it look so easy but then he's had a lot of practice. I'm better to go with the more dummy-proof method. :) Thanks folks!

@mavfan1 Жыл бұрын

B1, A1 and A1X. I had a 2nd B1 that was dropped and I heard the lamp shatter but there was no real external damage other than a scrape. Profoto quoted me over $900 to fix. I passed.

@mikaelhylander6321 Жыл бұрын

Great video! Last shot when you raised the key light a bit looked amazing. How can the background stay so dark when as it looks from our (viewers angle) the 2:nd light is directed on the model and the background, I was thinking it would luminate also the background to some point.

@robertway2858 Жыл бұрын

With both the key light and fill light, would you expect two distinct catch lights in her eyes?

@DanielNortonPhotographer Жыл бұрын

I would not

@kirkdarling4120 Жыл бұрын

There are a couple of ways to express ratios. You express them as "power ratios," according to how you set the power of the flash units. I was taught long ago "lighting ratios," which is a matter of how much light is actually striking each portion of the subject. In a lighting ratio, the calculation includes the fact that the highlight portion of the subject is being lighted by both the main light and the fill light. You expressed that when you said that the 1:4 power ratio provided a 3-stop highlight to shadow ratio. You know what you're mean, but that might have been confusing to someone new at it. The advantage of the "lighting ratio" is that it doesn't matter what kinds of lights or modifiers are being used...the lighting ratio would be the same. But, frankly, for me identifying the light ratio is like a chef writing down a recipe. He doesn't do it for himself, he does it for other people. I would only record the ratios I use in order to instruct an assistant to set up the lights for me.

@kobiorama Жыл бұрын

Great video. I'd like to also see a direction chart of the lights - 45 degrees fill? side? location of key?

@danbrowning2418 Жыл бұрын

Almost too easy! Thanks.

@FOTOLOCO_ Жыл бұрын

TTL is measuring light with the camera isn't it, so where are the lights placed does matter a lot. Is there another way to measure "TTL" on the lights?

@williamcahill617 Жыл бұрын

Merry Christmas all

@gilbertsanchez4348 Жыл бұрын

Daniel great info. One question. Do you have VR activated or Not? Thanks.

@timip3658 Жыл бұрын

I've tried shooting teathered with Lightroom and it doesn't show up the most recent photo automatically so I have to refresh on the computer manually which is annoying , anyone got any tips on settings that I supercharge ?

@pacorosso7400 Жыл бұрын

But ¿Who guarentee us that the TTL adjust actually a 4:1 ratio? ¿It is an "overall" apreciation of the TTL, isn't it? But if I read the reflected light from each side of the face ¿it is an 4:1 ratio? (no).

@MojoPapiFPV Жыл бұрын

Why would you use TTTL in a controlled environment like studio?

@DanielNortonPhotographer Жыл бұрын

It is a simple and effective metering system

@hawg427 Жыл бұрын

Why does the Profoto only go to -2

@jakobhovman Жыл бұрын

Hullo h...-1= half, -2 = Quart. -2 is 1/4 light...Enough difference for most. PS: Any extra diffuser on Fill light, will lower its output...Increasing the difference.