No video

Setting up the TX-10 for fault finding mode

  Рет қаралды 1,530

Huntsville Utilities

Huntsville Utilities

6 жыл бұрын

This video is a demonstration of how to set up the TX-10 for locating faults in electric service lines. This video is not meant to replace proper training. Please follow all safety procedures and guidlines when using the fault finder TX-10. Huntsville Utilities provides electric service to Madison County and surrounding areas in north Alabama.

Пікірлер: 4
Backfeed Protection
5:06
Huntsville Utilities
Рет қаралды 163 М.
Fault Finding with RD8100
9:03
Subsurface Solutions
Рет қаралды 10 М.
Son ❤️ #shorts by Leisi Show
00:41
Leisi Show
Рет қаралды 4,4 МЛН
Antenna Modes in the Radiodetection RD7100 & RD8100 Locators
18:14
Subsurface Solutions
Рет қаралды 48 М.
Fault Locating  - long version
11:24
Subsurface Solutions
Рет қаралды 18 М.
Fault Locating - quick 7 minutes
6:44
Subsurface Solutions
Рет қаралды 26 М.
Radiodetection RD7100 Tutorial
14:50
Subsurface Solutions
Рет қаралды 73 М.
PCM training
21:39
Subsurface Solutions
Рет қаралды 12 М.
MaxV on Radiodetection Tx-5 and Tx-10 Transmitters
2:38
Eastcom Associates
Рет қаралды 6 М.
Pairing your RD8200 receiver with the TX10B Transmitter
2:11
RJM Precision Instruments
Рет қаралды 1,8 М.
Radiodetection Transmitter Setup
15:33
Subsurface Solutions
Рет қаралды 86 М.
Understanding Current Direction on your precision locator
1:15
Radiodetection
Рет қаралды 22 М.