it says "You need permission This form can only be viewed by users in the owner's organisation. Try contacting the owner of the form if you think that this is a mistake."

@@SebzAU Thank you for the heads up! I just edited, so it should be good to go now. Please let me know if it gives you any more trouble.

@@cheineon Too easy! Really hoping I win cause I'm about to start my podcast/talk-show's 2022 season!

@@SebzAU Hell yeah, what's your show called?

@@cheineon I also got my co-host to enter the giveaway too, I assume that’s allowed cause it’s 2 different people with different answers and stuff haha. All good if not tho! 💜

Thanks! Glad it helped

Thank you! Glad it helped.

Thanks for checking it out! Glad it helped

No problem, Mac. Thanks for checking it out.

Thank you Enrique!

Glad to help!

Thank you 🙌

Thank you! And yes, I think your remote setup is great.

I'm glad to hear it! Thanks for checking it out

Happy to help, and I'm glad to hear things are coming along with your podcast! Getting used to the RODECaster can take some time, I always keep things the same: I plug the microphones into input channels 2, 3, and 4, this way the output channels should always be 4, 5, and 6 (because output channels 1+2 are the stereo summary of everything.)

Thanks Waqas

The table is 2 butcher block tabletops put together. I bought 12 table legs off amazon and drilled those into the bottom.

Thank you!!! Going to lowes!!

Thanks Artie! I appreciate it.

RODECaster preamps will definitely do the job and do it well. I like using the cloudlifters with the Shure SM7bs because they usually need more gain than other mics I've used. When I use the Heil PR40s, I don't use the cloudlifters. Let me know if you have any other questions on this front, I hope this helps.

Glad to hear it, thanks for checking it out.

Ah, interesting. I'll have to check that out. Thanks for letting me know. I'm wondering if I already did that because the audio sounds fine usually, but now that you mention it, I sometimes get a consistent hum. Thank you.

How do you set it to line , when you have the ssd plugged in? If plugged into the computer, can it record ?

@@motiondphotography2024 ssd has nothing to do with settings. You have to use the Atem software on the computer. The computer needs a connection with the Atem. Either usb or network. Then you can modify settings in the Atem software. After this, you can disconnect when you need the usb port for your ssd. Recording is done by the Atem on the ssd. If you want to record on your computer, then you need a software application such as OSB.

@@knifecollector031thenether9 So if i connect the atem to the computer via usb c and change the settings on the software, will still keep the changes on the atem after i unplug? I know we need to adjust audio to line in, and adjust levels, but will settings be saved on the device itself after disconnect is the question? Thanks!!

​@@motiondphotography2024 Yes it will. Even when turning the Atem off, it will keep the settings.

Thanks Olek, I'm glad it helped. Yes, you have to learn as you go along. I've learned the most from mistakes. For the lights, I try to keep them about 1-2 higher than the guests, and far enough away where they don't cast too much shadow on the walls. That's been the most helpful. I've found that it usually takes about 3-5 lights if you're in a room with no natural light.

You don't need it necessarily, but I would recommend an interface if you have 2 or 3 guests in the same room. This way they can have their own microphones and audio files. Then you have more ability to match their volumes, reduce background noise, etc. If you want to keep it really simple and don't mind slightly lower quality audio, you can even put an iphone in the middle of everybody and record the audio. There's also some handheld field microphones from Zoom that will capture the audio. Really up to you on how in depth you're willing to go to get better audio. If the information is good and people like the show, you can get away with lower quality audio, especially to start.

@@cheineon Thanks , I just got " zoom podtrack P8 for the the audio. And i also got a video switcher . Now i need to out them together . Thanks for taking the time to answer my questions.

Thanks! You can try using the USB C to connect an SSD drive, then get a Macbook adaptor that has an ethernet port. Connect your Macbook to the Atem through the ethernet connection and you'll have access to the ATEM Software Controls app while saving to an SSD.

Each CloudLifter only has 2 inputs and 2 outputs, so I use 2 CloudLifters to record extra guests. You'll only need one RODECaster still though.

Do you mean you're going to do a solo podcast where you're the only person on camera, or a single camera production? I think being the only person on camera takes some getting used to, but it's a cool way to get your message out there. If you only have one camera, you can still record the whole podcast, you just can't switch angles.

@@cheineon I meant one camera angle.

Can one camera be as engaging as more for podcast?

Absolutely. Camera angles are good for making short clips, but the conversation is what people are tuning in for.

Hey Kalove, what specifically are you trying to do?

You can cut a lot of the cost down if you film on a phone and plug the microphone into your phone. I've actually got a video coming out soon that's gonna show people how they can record a podcast on a $50 budget.

Thanks for checking it out! I'm not exactly sure if you need the SD cards in the camera for the HDMI out port to work, but I imagine you wouldn't. That said, I do keep SD cards in the camera and I record directly to the camera as a backup. I've had multiple times where I need to use the backup footage from the SD cards because of a piece of equipment failure, cords coming loose, etc. It's not frequent, but having the redundant backups always makes me feel better, especially if you're charging someone for your services. You do have to physically hit record on the ATEM device to save it to the SSD drive. You can also hit record in the ATEM Software Control app on your computer. If I can help with anything else, please email me at cheine@cheineproductions.com.

I use the Canon XA55's. They're the same as the XA50's, but they have an output that can do 4k. If you don't mind having 1080p output only, then the XA50's should work for you and you'll save about $500/camera.

@@cheineon yeah awesome man! I’ve just checked them out and they’re a little (a lot) out of my price range but definitely something to work for!

@@SebzAU both cameras are the same price on Amazon. By the time you or I can afford them there will be something better on the market

Very true, but I like it as a redundant audio backup. Plus, I can record each individual track within Logic, so if I need to match volume, apply EQ/compression or noise remover, I already have the tracks in my DAW. It eliminates the extra step of having to convert the files from the rodecaster into the DAW.

Sorry for the late reply, the headphones are the Beyerdynamic DT 880s. You can purchase them here: a.co/d/cutUiBV

Ah, gotcha, thanks for the heads up

All of the equipment + costs are available in the description in a Google Doc.

That's why I recommend outsourcing if you want to get this level of production. To start, I recommend doing a podcast remotely and using a system like Streamyard, get a webcam like a Logitech Brio, an Opal, or the Insta 360, and a microphone like the Shure MV7 USB or the Vocaster One Studio. It's really easy to set up and will keep your costs under $500 total.

Hey Sebz, I didn’t get enough traction with this, so I’m cancelling the online course creation for now. Hit me up on Instagram at @swflpodcasts and I’ll send something your way.

I can't remember exactly which one I bought, but this is the type you need. It's a 1/4" to 3.5mm cable, and you want to make sure there is both an R and L 1/4" jack that combines into a single 3.5mm jack: www.bhphotovideo.com/c/product/1364249-REG/d_addario_pw_mpts_06_6_1_8_straight_to.html

@@cheineon thank you

Hey Tavo, thanks for checking it out! I use the Atem Mini Pro ISO to handle the switching. That said, it's not automatic. Either I'm switching back and forth between cameras as I'm recording, or I let the Atem record, then I go back and switch the camera angles in Davinci Resolve after the fact. That's only available when you get the ISO version of the Atem because it's recording all the video feeds at the same time. I've seen some software out there that automatically switches video based on who's talking, but I can't remember the name. I'm not sure what you mean by the last question. I hope this helps!

You can use Davinci Resolve on Windows as well. They have a free version that works great.

Somewhere along the lines maybe but idk where

Hi David, fair enough. I put this video out last year in hopes that it might be a precursor to an online course, but I didn't get any response so I went a different route. So thanks for the note! I appreciate it. If it would help, please visit www.swflpodcasts.com and book an intro call. At the very least, I'd be happy to help give you some guidance on how to set something like this up.

If you have the money like you say you do then hire people to do it for you. That's how the world works my friend being 55 you should know that by now

@@kiddgroovy big yup. Plus there’s ChatGPT

54 year is young enough to learn new stuff. You should try harder before blaming the owner of this channel, mate.

😂 but we try anyway. Thanks for checking it out.