Welding helmet 👍 Welding gloves 👍 Welding jacket 👍 Exposed ankles.........🤘🏽

welded diffs: "im here for a good time, not a long time"

*Can't wait for hert to unweld it...*

Camera man does a good job asking questions were all asking inside

Dan didnt need to do this, he was just looking for a reason to weld something.

Next week on Life OD: “can you use vegetable oil as diff oil”

I've always ended up breaking them when I weld just the gears so what I started doing is welding the gears to the carrier also. Now that's all cast steel which will become brittle when it gets hot so when you weld up a rear end like this pre heat it with torches and it's best to use a stick welder with nickel rod and after you weld it throw a Insulation blanket on it so it cools down slowly that will prevent cracks and weakening from the welds. I've had a lot of experience with welding up rear ends lol

“My lights are dead”, “Cool man, just like everything in this shop”. I laughed so hard. Sounds just like me complaining at work everyday.

The cinematographer was asking all the right questions, thank you, very informative.

Random trivia, RTV stands for Room Temperature Vulcanizing Silicon

The dude asking questions was actually really really helpful

Chair slayers reactions are priceless

Dan just gets shit done..

Kyle and his questions are legitimately the best part of this video. Really informative and great for people eager to learn.

Thank you for showing real struggle, and the real hype up to lifting shift.

EVERYBODY needs a Danger Dan in their lives...

It's nice to watch someone do a really good job explaining something you already know. Differential gears are such a cool concept.

Better to have the earth on the crown wheel so the bearing don’t get damaged/arc.

Great to see Rob back at it. Hope all is well my man, cheers from the Maritimes.

Dan is my hero, I'm putting a welded diff on my 328 tomorrow at Johnny's shop.

It's so awesome to see Rob back in multiple videos!

so happy to see rob and dan in a video together, these guys could create anything

You know what, Im just gonna say it... 'Bonus is the better channel

I feel like Dan really makes this channel superb. It was great but sense he joined..superb

Dan needs a raise!!!

Dan your the best thing that has ever happened to hoonigan im sure this channel wouldn't be what it is today with out you dan thank you brother keep up the good content :)

My favorite thing was seeing chairslayer in the shop again.

You were talking about cleaning access splatter out of the casing, would you spray anti spatter around the gear your welding to stop the splatter hitting them? Or send it

Just about to go to bed and I saw this, 3:24 AM. 🤦🏼‍♂️

Danger Dan and Chair slayer shows ya the power of the beardy mechanic.

Duffman says "Hoonigan has GOT to move somewhere for Yard partying."

Dan's awesome, whatever He's making, he needs a raise.

Am I the only one that, despite watching on a computer screen, instinctively looks away from the flash when someone starts welding? lol

“Two Robs makes a right” 😂😂😂😂

lmfaooo robs face when he heard the driveshaft is welded in place

learnin with Dan awesome

Welded diff on a daily?!! Broooo!! You are a real man. That’s definitely not a comfy ride.

Dan just man handling diffs out there lol.

"this is like a birth, it's fuckin stuck in there" 😂😂

I love that when Dan first came on the show he was Rob's Legs, and now they Ranning the place

I thought you did this already, then I remembered it was the Miata diff. Lol, Shart/Shit... Damnit!

great explanition bro helped alot!

Using the wrong sillycone will leak in a week or two. When in contact with oils use Black RTV or Grey RTV, NOT High Temp Red. Danger Dan has been watching too much of Bad Daddy Brad. lol

Uh ohhhh....danger Dan is starting to speak some of those disgruntled employee words....

What would you recommend the welder settings should be?

You're going to see orion upload a video saying "vegetable oil as diff oil"

big strong guy holds camera while a guy in a wheel chair help some one fix their car... lol

Dan bloody changing the diff all by himself, like that diff weights like a shit ton

Everybody down here talking about welding in plates and using proper gasket types, I'm just regretting shaving after hearing "With our minds and beards combined"

How to skids: 1- Weld nue boi 2- Remove old boi 3- Install nue weld boi 4- Skids

My white supra has a lsd that needs refreshed with a Weir max lock kit, hopefully I can get both to spin at all times again. But I'm gonna get the open diff on my burgandy mk3 welded up so I can really hoon. Got some studded snow tires for the races on the lake this winter, its gonna be so fun.

True thanks for getting back to me guys

As for the gasket, I heard it is best to tighten everything down when the gasket maker is still wet? Is that true? Or Leave it dry and then tighten the bolts down? Just put my 188mm 3,91 75% LSD in and it leaks :(

What does Dan's tattoo say ? Love the Tig torch in the middle

Must be a "just send it" diff👍, to properly weld a diff, 1 cut metal plates to fit in the gap of the spider gears, 2 tac plates, 3 pre heat with a tourch (makes for deeper welds), 3 weld on spider gears aposing corners, then weld on plate solid, repeat for other side. Optional is to run a higher speed feed with hotter v and fill in the valley, overkill really. Other than that the only nit pick i got is the rtv, overkill much? Lol. Another note is to clean it properly, makes for better welds. Lets see...oh...nvm...pinon seal...diving too far in to it. Hmm...good vid to show how to build a "send my cv shafts" 👍👏

Can you use flex seal as a gasket?

I had my diff tig welded & I didn’t have to clean after for slack and my diff lasted longer than the 1st one I had Mig welded. Still going strong

I’m feeling a different vibe this video yea? Also what happened to dtt tandems

I wish to be as cool as Dan one day

Whats the difference between spool, mini spool, air locker, e locker, and lsd like how do the methods change to achieve the same sort of result ?

First frame, full on sketch? Sounds about what a Hoonigan video usually is like. Carry on

Dan and ChairSlayer are long lost brothers

Dan is the real hero at hoonigan

Danger Dan is starting to look like Pro BMX rider Morgan Wade

ol dan sure loves a leg tan

Anyone here the cummins running ahahahah we know he is beating vin now

If im getting home from partying and a Hoonigan video comes out, am I out too late or I caught it early 🤔

"This is like a birth"

I feel like Kyle is Dan's padawan learning, seeking deeper knowledge from his master.

Welcome to hoonigan:your job description-“beat sh*t into submission”

@7:40 Rob left Dan hangin when he wanted a fist bump 👊😂

I feel bad for Dan sometimes being so small...as a certified Big Boy, I toss heavy stuff around like it's nothing pretty regularly without any struggle...but I also can't fit into 90% of the places that he can fit into, so he's got me beat there...plus he's more handsome...and a better driver...and athletic...you know, on second thought, I don't feel sorry for him anymore XD...

Chairslayer killin it

Are you guys tired of us saying MIDNIGHT SQUAAAAD yet?

That's why you get a limited slip diff and you get the best of both worlds.

Damn I'm early, Loving the videos.

Ok so question?!! I've seen people stick a small piece of flat steel in between the four spots you weld, is that better or worse? I've never welded a diff myself or could watch it be done but I know where to weld...but you didn't use the metal plate is that not needed?

Here in the welder spool up like a turbo awesome

In my experience Mopar makes the best gasket maker. One for oil and one for transmission. Both work better that any other RTV product in my years of experience. A little pricey but will hold up for years. AND WHO DOESN'T LOVE A WELDED DIFF.👍👊😎☝️✌

When will we get a build breakdown on Dan's ride?

7:11 chairslayers face had me dying

Who else noticed at 3:42 dan hit the camera?

For everyone wanting to seal your diff the right way, there's special stuff permatex makes specifically for differentials which is black.

"We could probably use vegetable oil" challenge accepted

Danger dan using Brad's old 36 tooth ratchets lol

Drunk!!! 😂😂😂

I been here since 200k subs Gucci gang

Dan treats his diffs like he treats his ladies...

I've daily driven plenty of spools and welded diffs, it's not bad...you just gotta want it!!!!!!! Haha

Do you lose hp from that ?

Curious, what’s the negative effect of a welded diff? Why wouldn’t you want to weld your diff if it’s just your daily that you may or may not want to slide a corner now and then? Why isn’t it for everyone?

"So Dan, would you say your daily driver is... dangerous?"

At first i thought Rob was Dan and i was like “why is Dan in Robs chair”

I’ve seen so many tutorials about welding RWD diff but there is no FWD diff welding footage... how hard can it be?

Could you do a video actually installing a posi? Scumbag garage, welded vs spool, and Posi clutches vs gear driven.

Did you guys swap the diff in shit car at some point? I swear in older videos both tires spin and smoke when doing burnouts. Some 318is came with a 3.45 to 1 or a 3.38 to 1 LSD. I believe only 318's with the winter package came with them. There was a tag on one diff cover bolt,if it started with S its a LSD and you welded a kinda rare diff up which already spun both wheels.

Hoonigan needs more chairslayer all around, he's a super human!

Please consider using an LED light at times to allow us to see in the dark shadows that the camera can’t pick up. Especially on B

“U can probably use vegetable oil “ uh oh danger dan giving factory OD video ideas !!!!!

That's what good wheels do.. They spin together