@Stephens8x6Workshop 3 жыл бұрын
Nicely paced and very informative presentation. The Carver/Grinder is yet another tool I have to add to my wish list.
@ScrollSawCorner 3 жыл бұрын
Thanks for watching. I think it's great for roughing in shapes and detail work. Between burrs, sanding mops, sanding drums, and diamond bits you can do a lot with it and it doesn't get hot like the smaller rotary tools I've used.
@GuidoMillonezz 11 ай бұрын
You going to have a long live, there are a lot of ppl like so happy to find an very instructional video like this, it was beyond what I was looking for…
@jameszaino5930 3 жыл бұрын
Thanks for this informative video. I'm just getting into scrolling and found this content useful.
@ScrollSawCorner 3 жыл бұрын
I'm glad to hear that, James. Thank you for watching.
@stevebrown2079 3 ай бұрын
Very helpful video. Thanks so much!
@woodyfriendron Жыл бұрын
Very informative, I also have just gone into Intarsia, I have been scrolling for some six years now, and think I have the skill leval to move up to this next level. I intend to use Pine & paint, then I intend to start using different coloured woods. Thank you for the video, very much appreciated. Roy in Australia.
@kenn1936 Жыл бұрын
Excellent video. Thank you for sharing. Do you sell the patterns for the projects you have on your wall???
@mahlenbrenda 7 ай бұрын
Have you tried using one of those inflatable drum sanders? You can get one for the drill press fairly inexpensively. I enjoyed seeing your techniques for the other sanders. Thanks for the informative video.
@tommytitmouse 10 ай бұрын
very informative, and a couple of your suggestions I hadn`t even considerd but I will now. My problem is I only have a smallish shed (10ft L x 8ft w) so I`m getting more & more limited in what I can add otherwise I`ll be climbing over tools . Plus,I have two cats that live in there also ,and They keep complaining about the space in there diminishing all the time .LoL
@ScrollSawCorner 10 ай бұрын
There are always more tools to consider! I find myself reducing the selection as I get further into my craft.
@volkerbraun7842 3 жыл бұрын
Good Video!
@ScrollSawCorner 3 жыл бұрын
Glad you enjoyed it! Thanks for watching
@poultonprojects 2 жыл бұрын
Cool video I just made a sign but didn’t know it was called that!
@ScrollSawCorner 2 жыл бұрын
Could be intarsia or segmentation depending on how you select and cut the wood. Shaping techniques are pretty much the same. Did you make it on the scroll saw? Thanks for watching!
@poultonprojects 2 жыл бұрын
@@ScrollSawCorner I did it on the scroll saw it was an airborne sign
@ScrollSawCorner 2 жыл бұрын
@@poultonprojects that's great, I'd love to see that. Did you post it anywhere? I just had someone ask me about making an airborne sign this week.
@poultonprojects 2 жыл бұрын
@@ScrollSawCorner yeah I am on KZfaq and Instagram
@ScrollSawCorner 2 жыл бұрын
I'll look for it!
@pizzawarlord9232 Жыл бұрын
Great video
@clivemilner 2 жыл бұрын
Do you pack spacers , to raise pieces up. Wood carving can also help. Too much sanding, may lead too plastic artwork
@websurfer48 3 жыл бұрын
Great video, thank you. Where do you get your bits for the Harbor Freight grinder & the sanding mops?
@ScrollSawCorner 3 жыл бұрын
I got the set of carbide burrs from Amazon, diamond bits from Peachtree woodworking supply, and sanding drums from Amazon
@josecarlosramirez9936 3 жыл бұрын
The ducks is perfectc!
@ScrollSawCorner 3 жыл бұрын
Thank you! I enjoyed that project. I have another video on that project in my history.
@deannakoa3 3 жыл бұрын
I need one of these Deer omg!!
@josecarlosramirez9936 3 жыл бұрын
Hi!
@carolschulz755 3 жыл бұрын
What is your source for sanding mops?
@ScrollSawCorner 3 жыл бұрын
The wood river ones from woodcraft seem to work well and aren't terribly expensive. I think you can also find them on Amazon.
@rosesj1322 Жыл бұрын
Is there a link to the deer pattern
@ScrollSawCorner Жыл бұрын
It's a Judy Gale Roberts pattern and can be found on her site intarsia.com
@GuidoMillonezz 11 ай бұрын
Scroll saw vs Cnc machine? I find a lot of creators over investing in Cnc machines when they could do the same with a big fraction of the money.
@holzmotte 3 жыл бұрын
It's a shame that the video isn't available in German.😟
@ScrollSawCorner 3 жыл бұрын
Unfortunately English and Spanish are all I can do!
@holzmotte 3 жыл бұрын
@@ScrollSawCorner ..... and German subtitles rarely work on KZfaq. Not at all here either. Unfortunately. KZfaq makes English subtitles for an English video ......
@Tavitooo 3 жыл бұрын
@@ScrollSawCorner tienes un canal también en español? Cual es?
@ScrollSawCorner 3 жыл бұрын
@@Tavitooo Lo siento pero no. No tengo mucho tiempo. Si tienes preguntas puedes preguntame en español. Gracias por mirar
@bobsullivan5714 Жыл бұрын
Not available in Klingon either....Maybe later?😏
@vladnickul 2 ай бұрын
well... dremell tools are really bad the quality and spec. are comparable to any discount/budget brand. get yourself a Proxxon ;)
Кушать Хочу
Рет қаралды 6 МЛН
Stumpy Nubs
Рет қаралды 173 М.