Low and slow I've found is the best technique. Low heat at vac. Flip the oil half way through

Im well aware of the results of using heat on your oil. Flashing with heat like in this video has minimal terpene loss compared to lower temperatures for longer periods under vacuum. For the record this oil was fully purged prior to the making of this video. The references mentioned relate to the use of the Terpenator MKIII. This video was only made to prove a point, not to push this as a new technique. This certainly isnt the ideal way to make shatter. I was only showing that there are many ways to get the form we want. This particular method goes against most current methods stating that heating above 120 makes runny oil. Im still looking for the scientific explanation of what is occurring here... As for as the clean room suit, what you cannot see is the 4 ft laminar flow bench to prevent airborne contamination. Dust, hair, mold, whatever is on your clothing gets into the oil. Ever look at your oil under a microscope? You may be surprised at what you find. Clean oils from clean closed loop equipment and clean rooms. Thanks for watching. E. Dabbinquartz

Also wondering about the decarb. I will say that the slabs do look a bit cloudy in areas tho. Maybe the camera idk

So it's a butane push that is being flash dried with the heat gun? I like that petri dish, need one of those. Also, this clean room lab seems essential to operations. About how much flower did it take to get that?

I have done this myself and am amazed that it works well.

Sorry but how do you control the temp ? Now you are Burning the. trychomes inside ... mixing it on a grill plate ( i see you have one ) is way better in combination of a temp meter.. The way you just showed us is FAST but i dont think its good for the quality ;) greetzz

When you're scraping it up before you heat it, and it's still the consistency of ear wax, can't you just put it on top of a bowl of reefer and smoke it like that? Does it get you any fucked upper if you let it harden? When I was young, we used to get brown Turkish hash. A kilo brick of it had a gold stamp on it. It was the consistency of cheese. We even called it cheese, in fact. You could roll it in a ball, you could cut it with a knife, you could roll it into a skinny snake and put it in a joint, you could put it on a pin under glass, melt it between two hot butter knives, or just put it in your pipe and smoke it.

Hey cool trick butter to shatter rite? I noticed you had to really heat it up i was wondering dose that affect yur terps at all?

How long are you flashing the material and the distance needed to be from it ?How long of a cool down ?

how do you get it to that sugar form before you turn it into shatter

Any tips on how to turn distillate into a crumble by re introducing cannabinoid isolates ??? Basically like a how to make wax from distillate

@Errl DabbinQuartz interesting video. if u don't have one already could you maybe post a vid on the full process of making solvent less wax. It would be much appreciated I am what ppl would probably consider a newbie to concentrates but I have been researching them for prolly about 6 years now and considering my age I think I know a decent amount about them relative to other ppl in my conservative area and I would just like to expand and learn more about the extract process and culture please and thank you Btw ppl get off his back obviously this would not be the proper way of making shatter. I could understand if he had nothing to state that be he very clearly does

The way I evaporate the solvent is I use a scented wax melter. Keeps it at 58 degrees Celsius

Ive tried the same tech several times and it always comes out sappy, or at best, pull n snap

I too am looking for answers. You tell me what Im making?Partially decarb'd shatter possibly. I will wait until I get some test analysis results before I make an assumption. I cant find any research papers or scientific reports of what is actually occurring in the various oil forms. Mostly just forum 'gurus' regurgitating info they have heard over and over. This goes against a good bit of the info Ive be told to be the laws of cannabis oil physics. Im just looking for answers really...

Where did u buy ur heat gun

What happens if you put shatter threw a second bho extraction?

Can i do this if i dont oven purge?was gonna just let the bho sit for a few days. Or should i buy a cheap vac oven?? Just trying to make some person for myself. Honeybee extractor.

What was ur initial purge? Hot water bath or what?u saying this never touched a vacum?

Are you heating it enough to decarboxylate the oil?

The first stage man.. how you leave it in the clear lid or

looks like that material has significant wax remaining...i guess it doesn't matter still get nice and high just a bit dirty on the bowl

What temperature should I be using?

If people had any idea how easy it is to make small batches of proper shatter, everyone would be buying the 20$ bho and converting it to shatter (if thats what they want) in minutes.. Looks like he went a step further and winterized at the end. I prefer eax over shatter, however I notice more of a head, sativa type high when I shatter it..so usually I just get nug run wax in bulk and turn half into shatter. Or make my own and do the whole process. #sweetleafteam #griddleshatterisfine

Hey man , how do you get it to be hard on the what is that plastic ?

INteresting, may I ask what specific model blower/dryer you;re using?

Great video. I’ll be trying this with my next blast tomorrow

I would really like to know how you got it so nicely colored. How did you purge? Please get back to me. Thanks

You could just do this on frying pan low temperature?

Nice video. How much shatter are you heating +/- ?

It's impossible to make it via this method unless you're unemployed and can sit at home for 2 weeks holding a hair dryer to your bho. You pretty much have to have a vacuum purging chamber.

Will that change the high at all?

Haha the funny thing is. To make stable dab wax or shatter you need to make sure all the butane is boiled off. If it’s still really slime consistency then theirs butane still inside of it

You can repress the wax with a rosin press to get a good shatter without destroying the terpenes like he's doing this is what you do when you don't care about flavor and I'm pretty sure that heat gun doesn't go below 250 degrees which is where THC starts being destroyed

PEOPLE YOU DON'T NEED A VACUUM! Small batches can easily be heat purged of ALL.solvents. It's when get to large quantities that the vacuum becomes necessary. I've been in the industry for YEARS as a concentrate producer and have tried countless methods and spent plenty of my bosses money in the mean time.

Where did you buy that green tupaware ????

does look a little bubbly in some shots can you just confirm for people this wa purged before the video..

Indirect heat may be better (heat from the bottom)

Forgot about terms if that was done right and tested the same product through vacuum oven at low heat vs this your will have lost percentages of thc that would have been slightly decrabed then when you dab that it's burning of more than normal

thank you for a great video!!!

I watch a guy make fine honeycomb some that looked like it hand been sprinkled with sugar lol he took it laid it on parchment paper and set it on a burner at 110f until in had fully melted with in about 5mins when he fully cooled down it now looked just like shatter and it was hard not sticky to the Touch and would snap at room temp and it was 72f in that room he did not winterize it and it was clear clear like honey! what is this really it is shatter or a hybrid

Funny how most of the people making comments on here obviously have no idea what they're talking about and have only been watching KZfaq videos and that's where they get their information....

I did that once with a crumble I got - used the heat gun and it turned into shatter.

Couldnt you stick the oil in the oven for 4 hours at 170?

Ive heated shatter slowly with a heat pack for 20 minutes and whipped it like hell. And heated it again and ended up with this really crumbly dabs. Nothing was wrong with it, it tasted amazing and burned nice. Not only that it turned white when it started out like this shatter on the Vid

You people are way too angry to be actually doing dabs. You ever try just vapin' the shit and chilling out?

Turn the quality settings to HD for a better view. For the record thats not techno playing its Midnite band, but sounds funny since the video is sped up..If you have any questions dont hesitate to ask...

Fascinating vid, your setup makes me drool being a Sci Chem 🤓 nerd

How does this treat the terps

Whats the point in turning it from shatter to liquid and and back its not changing any properties of the dab or increasing the thc thereof so just seems to me dude was bored and wanted to play with his dabs but we do this everytime b4 smoking shatter heat it under the hot water for a few min safely inside my puck until its the thickness and feel i want but this was just a waste of time for me and you

Is Ethanol better than petrolether? And what paper is that? I always fear that my oil stays sticky and I wont become it off paper

He's Good...Knottyy has a video on making honeycomb/wax into shatter using heat with just a 1 gram slab on a hot plate...

what heat fatherearth?

I like the process I say to one there own lol but u might wanna look in to just a small vac pump just to pull out all the last but of gas and air.. I know airs not a problem when smoking but it helps stabilize it a lol more but I will b trying this maybe after my vac process.. I'm loving it tho.

I have found with qwiso and other concentrates that heat is very bad for extractions as its much more sensative then flower. I have even read to bake your bud first at 200 for 20 mins. DONT DO THAT! You will get product faster but not nearly as good and tastes like crap. I run a q at a time. No heat long air purge (use a fan for faster evap) and get over 1g pristine oil every time mostly 1.2-1.5g with the .2 or.5 is the last wash thats not fit really for dabbing

For some reason this makes me think of the movie "up in smoke" with Cheech & Chong 😂

There are several alternative methods for cannabinoid isolation on my channel. This is an assumption, but these methods are easy to verify, and they have a number of advantageous features.

Very cool. Question why shatter instead of rosin? Is it just because it's easier to handle?

How do I get my shatter dry and not so sticky? I vac purged for 2 days and it's still really sticky and soft. Do you have any pointers?

I used to make shatter by using an oil slick pad and purge my oil in the oven on 175 in tell all the bubbles are gone let it sit for a few hours then put it to the freezer for a few more then let it sit for 30 mins an see if it breaks it's come out a little blackish but it smokes just like any shatter I get form the dispensary

TRANSFORM YOUR THC INTO CBN....... shatter is fail.

yea when your doing this all your doing is heating its up so hot is burring t h c out and degrading the wax like the guy be low get a vac pump with a puger

lmfao since when did youtube become a contest to see who knows more shit its like the comments are a bunch of high schoolers trying to sound smart.

Sooo u can take wax hit it with a blow dryer and make shatter?🤔

Another tip hack whatever Take a slab of shatter brush some terps on, let it sit for a day and you'll get a sugar wax with a wild terp profile. I prefer solvent free, but bho can be very good when done safely and correctly as seen here. Very cool vid, thanks for posting it.

Glass petri dish?

I'm not sure what you did to the product inside the petri dish, but right after a normal extraction, the product can be taken and heat purged using a griddle. If the oil is heated enough, you can purify it as well as a vacuum purge could. The trick is to expose as much surface area to the surface of the griddle and mix the oil around. Don't overheat the oil. It won't be a shatter until it can harden once it is cooled down.

What is the starting material, just pressed rosin ?

This vid and comment section

This stuff will just auto buyer back to how it originally looked the first time it gets warm

20$ shattering all over the place when he does that lol

i can understand the gloves but is the entire suit really needed?

does the heat gun not melt any of the parchment

Love the Cleanliness! Keep up the good work

Would this work in an oven? Or microwave? Lol

I would rather have it before the shatter, I whip most of mine. Comes out unreal!!

cool method... but I can make square inch cubes the way I do it.

does this work with all wax like honey wax

Nice technique.

Hey bro cou.. coul.. could you season my nail ?

gots some breaking bad going on heres ladys

Stuff had so much bubbles lol

I only do this obviously when I buy wax by mistake. wax keeps falling off my dabber. so I heat it slowly on a pan over the stove till it changes into a shatter like consistency. nothing bad happens I still get super stoned. it just sticks to my dabber alot better and doesn't fall off when I attempt to put it on my rig. once it's melted to the consistency I put it in the freezer for a few mins, mold into into a small cube and bam let's dab it homies.

Could a professional blow dryer be hot enough?

very nice kind sir

Is this bho ?

Good video! !! It's pure. clean . you can just look an see!!! I use a vac chamber but this is a great way to make it as well !! Seen some guy say hes a rookie lol your dumb you can just see he's about that dab life lol a pro an I can clearly see he knows what he's doing!!!

I just use a $10 USB powered coffee mug warmer and a parchment paper muffin cup. Less steps. No mess.

I do the same with a small torch lighter.

Why is he doing that? Thx for the answer ^^

Isnt it a bad idea to place shatter on Bleached paper? Wudnt bleach leach into the shatter wen u heat it up? Isnt brown unbleached paper the way to qo?

I really hope that was purged/cleaned prior to you using that heat gun. That is not real shatter, let alone anything you wanna smoke if it hasn't been cleaned.

all this just to change the colour

i think some further explaining of the process is needed here... obviously he isnt a noob, and i personally applaud the sterile environment, but im gonna be honest with yall it depends on what the heat gun is used for.... if ur trying to purge it with it hell no... but if uve purged in something like a diy chamber, honestly afterwards it isnt crazy to use a heat gun quickly to get a different consistency that u arent getting.... that starting material looks like shatter to me... looks like the glass kiinda shatter where peices go flying never to be found again till weeks later covered in shit.. .which is why it seems he was using a heat gun... personally, if he is purging in diy chamber, and using an oven for a little after, hey if u wanna fuck with the consistency just a tad so its pull and snap i dont see a problem... ive seen quite a few hash makers with a heat gun on hand just in case. the only way to cancel out the necessity for the heat gun, would be to use lower heat and pull it sooner when its still pull n snap but before it goes to a full on glass like state.

Why do you break it? One big untouched glob of shatter sells for more and looks better than when it's all cracked up like breaking bad gold meth.

Y not just tilt the Petrie dish side ways as u heat bk of it n run into waxpaper...hmmmm

I dont understand why people like shatter so much... It is low in terps. The only advantage I can see is for putting it into vaporizer pens because the sticky shit is a pain in the ass to get into the chamber.

I wanna do this to this music lol

What do you recommend I do when I extract the reclaim out of my rig and let it evaporate?

Nice