Shimano Baitrunner 8000D - MUCHAS PROBLEMAS And Rebuild: Fishing Reel Repair

Рет қаралды 17,870

3 жыл бұрын

This actually isn't as bad as it sounds in the title... but it was a lot of little issues on this Shimano Baitrunner 8000D that compounded into one LONG video. There's a lot of useful tips and ideas in this one, so watch to the end. See below for helpful equipment and supply links. If you found this video useful, please show some love by hitting the thumbs up button and consider....
Hitting the Thanks button under the video
or my PayPal tip jar:
PayPal.Me/TSGReel
Amazon links (containing "amzn.to") and eBay links (containing "ebay.us") below are affiliate links. If you purchase ANYTHING through these links, I may get paid a commission. Help fund my future endeavors by using them when you purchase.
AMAZON main page - amzn.to/46qttJS
EBAY main page - ebay.us/3BvTqi
Shimano Baitrunner 8000D Reels For Sale on eBay:
ebay.us/OVZZMt
Shimano Baitrunner Reels For Sale on Amazon:
amzn.to/3DG2FrY
Paper towels I Use:
ebay.us/Hi2pWc (eBay)
amzn.to/48udknh (Amazon)
Gloves I use:
ebay.us/4CDP89 (eBay)
amzn.to/3SeAbgY (Amazon)
See my community page for links to parts suppliers:
www.youtube.com/@TSGReelServi...
********************************
Other Videos You May Like:
• WHOA! Who dumped a can... (How To Properly Grease Your Reel)
• Penn Battle II 4000 Fi... (Penn Battle II 4000 Tutorial)
• Shimano TLD 50LRS Hand... (Shimano TLD 50LRS Repair)
• Abu Garcia Ambassadeur... (Abu Garcia Ambassadeur 5000 Tutorial)
• How To Service Your Sp... (How To Service Your Reel In Under 20 Mins)
• Shimano TLD 25 Fishing... (Shimano TLD 25 Tutorial)
• Penn Spinfisher 650SSM... (Penn Spinfisher 650SSM Tutorial)
• Shimano Spheros 12000F... (Shimano Spheros 12000FA Tutorial)
• Penn International II ... (Penn International II 50SW Tutorial)
• Penn Spinfisher 6500SS... (Penn 6500SS Repair & Tutorial)
********************************
The mini screwdriver sets I use spin freely in the palm of my hand, which I prefer for speed.
MINI SCREWDRIVER SET (eBay)
ebay.us/QbICC9 (Spinning - Option A)
ebay.us/STpQDI (Spinning - Option B)
ebay.us/xvTFRx (Non Spinning)
MINI SCREWDRIVER SET (Amazon)
amzn.to/3r8NdBF (Spinning - Option A)
amzn.to/43ZpJ0g (Spinning - Option B)
amzn.to/437CsN8 (Non Spinning)
I, generally, use a ratcheting, interchangeable regular-sized screwdriver for the initial loosening of screws. Here's a link to the brand I use:
amzn.to/440Bwvb
Get some additional, varying sizes Flathead and Phillips bits while you're at it.
The adjustable wrenches I use (instead of hex nut wrenches) are Husky, but these (with the red insert) work very well... 6-inch will be used the most:
ebay.us/CKiSM7 (eBay)
amzn.to/3PAbkTT (Amazon)
If you prefer to use hex nut wrenches, I'd recommend angled/offset ones, like these:
amzn.to/44ljUtL
or a pass-through socket wrench set, like this:
ebay.us/ygHAQo
Reel grease I use:
ebay.us/AtmVUv (eBay)
amzn.to/46p4p66 (Amazon)
Drag grease I use (brown for warm weather, purple for cold):
ebay.us/WU7NOh
Oils I use:
ebay.us/RLtGzV (eBay)
amzn.to/3PubkVA (Amazon)
ebay.us/I3NXpx (eBay)
amzn.to/44kjdkz (Amazon)
Stainless Steel bearing cleaner:
ebay.us/hwU2YS (eBay - the red one)
amzn.to/4467s1q (Amazon)
Ultrasonic Cleaners. 3 liter or above:
ebay.us/olT4J6 (eBay)
amzn.to/3NusJuD (Amazon)
Small parts mesh basket for ultrasonic cleaner:
ebay.us/cmvoe8 (eBay)
amzn.to/3NuycBM (Amazon)
Ultrasonic cleaner additives (use in moderation):
amzn.to/444EaQG (dish liquid)
amzn.to/43bYZIY (heavy duty cleaner)
amzn.to/440wcZ5 (alcohol)
One of the bearing greasers I use... contact Alan directly (non-affiliate link):
alantani.com/index.php?topic=...
Workshop Overhead Light:
amzn.to/44fxbo0 (Amazon)
********************************
Quick links to navigate my channel:
Main Channel: / tsgreelservice
Video Library: kzfaq.info...
Individual Playlists: kzfaq.info...
********************************
#TSGReelService #FishingReelRepair #shimanobaitrunner #reelrepair #fishingreelmaintenance #shimanofishing #fishingreel #fishinglife #livebaitfishing
‪@TSGReelService‬

Пікірлер: 55

@TSGReelService 8 ай бұрын

Appreciated the video content? Want to show some love? Hit the Thanks button under the video or hit up my PayPal tip jar: PayPal.Me/TSGReel

@YL-mc9oz 3 жыл бұрын

Each of your videos is a new experience, nice to see how you handle the reels, a lot of patience and a lot of knowledge

@TSGReelService 3 жыл бұрын

Thanks for continuing to check out my vids and the compliments! Appreciate the love.

@brickcity9mm327 3 жыл бұрын

And a lot of greasing 🤭😭😭😭😂

@YL-mc9oz 3 жыл бұрын

@@brickcity9mm327 He puts grease on every screw so his work is just amazing - the screws are kept for a long time and do not break as a result of encountering salt water - it has already happened to me and it is definitely unpleasant, what's he disassembles the whole reel and assembles back, I really like his work style

@shamus967 3 жыл бұрын

Excellent Video....Thank you and Happy New Year!

@TSGReelService 3 жыл бұрын

Thanks and likewise! Thanks for watching!

@wilbertbenjamin9928 Жыл бұрын

You very good at serving reels good job man

@TSGReelService Жыл бұрын

Thanks! And thanks for watching! Spread the word about the channel.

@supervidere7 2 жыл бұрын

watched the whole thing. Thank you. Subscribed too.

@TSGReelService 2 жыл бұрын

Thanks for watching and subscribing! There was lots of good info in that video, so I'm glad you got the most out of it. More vids to come.

@seymourlebowitz7802 3 жыл бұрын

Excellent video, I has to subscribe

@TSGReelService 3 жыл бұрын

Thanks Seymour! I appreciate the love and sub. More vids to come. Spread the word about the channel.

@snappertales7251 3 жыл бұрын

Great video. With your guidance, I was able to service my own 8000D. Thank you!

@TSGReelService 3 жыл бұрын

You're welcome and thanks for watching! Glad to hear it helped. More vids to come. Spread the word about the channel.

@snappertales7251 3 жыл бұрын

Will do! BTW...who do you recommend as a parts supplier for these reels?

@snappertales7251 3 жыл бұрын

Since I use them from my Sea-Doo, my reels take a saltwater beating. 🎣😎

@TSGReelService 3 жыл бұрын

Sounds good and thanks. Betty's and nicks on eBay is a good source. Try doing a search for a specific part number or for Shimano reel parts... their user ID is boat0501. Hope that helps.

@stevenberg1903 3 жыл бұрын

Excellent! Thankyou...

@TSGReelService 3 жыл бұрын

Thanks for watching! Be sure to tell your friends about the channel. More vids to come.

@stevenberg1903 3 жыл бұрын

@@TSGReelService serviced 2 Baitrunner OC’s and a D today. Wouldn’t have started without your vid. Easy peasy,it was fun.

@TSGReelService 3 жыл бұрын

@@stevenberg1903 Happy to hear it. Glad to help guide you through the process.

@zakirhassan6011 3 жыл бұрын

Awesome, very helpful vid! Thanks for posting... I used this vid to service my 8000D. Does shimano sell the Baitrunner Shaft as a spare? My one where the clutch clips onto the pin on the shaft, the pin sheared off, so the plate just dangles loosely on the gear...

@TSGReelService 3 жыл бұрын

Thanks for watching! Glad to hear it helped! Sorry to hear about the cracked shaft. Yes, you can buy it separately. Check the schematics for the part number and search eBay or email me at tsgreelservice@gmail.com. I'm not sure if I have any.

@redsoxwinagain2007 3 жыл бұрын

After watching this video, I promise to take good care of my baitrunners to never have to take them apart. Seems like so many parts...

@TSGReelService 3 жыл бұрын

Thanks for watching! Good to hear, but you'll still need to periodically service/get them serviced to help prevent potentially costly repairs down the road. That being said, many reels can last many years with good after-use cleaning habits and minimally invasive general servicing. More vids to come.

@MrSea123456 Жыл бұрын

@@TSGReelService How does one service a fishing reel? I never done that before.

@TSGReelService Жыл бұрын

@@MrSea123456 if that is truly your question, you should probably take it to your local repair shop instead.

@porkchop955 3 жыл бұрын

TSG. ANother excellent video. I tell everyone about your channel. I have a Penn 4600 Live Liner. Its in new condition. I've never fished it as I have heard they are a nightmare to fix. What's your opinion on the 4600LL

@TSGReelService 3 жыл бұрын

Thanks for your continued support, Scott! The 4600LL.... they can be tricky to work on. Hopefully, you never have to open it up.

@TSGReelService 2 жыл бұрын

Hey Scott. Got a Slammer 760L in and thought of you. Keep an eye out for the video.

@porkchop955 2 жыл бұрын

@@TSGReelService Will do. I'm a bit apprehensive about popping mine open. Can't wait to see the insides

@TSGReelService 2 жыл бұрын

@@porkchop955 no worries, I understand.

@alanramos1819 3 жыл бұрын

I took my 12000 apart it fixed it but wasn’t fun at all

@TSGReelService 3 жыл бұрын

Thanks for checking out the video. Hopefully, you were able to get it back together. Tonight's scheduled video is actually on the 12000D, so keep an eye out for it. Spread the word about the channel.

@georgemorganphotography9714 Жыл бұрын

On my 8000D, where the knob meets the handle is bound up and does not rotate very freely. I tried removing the plastic “Shimano” cover on the end of the knob, assuming I could access a bolt to remove the handle, only to realize that whole assembly seems riveted together. Any suggestions on how to get the knob turning freely again?

@TSGReelService Жыл бұрын

Thanks for checking out the video! Yes, I believe that handle is a one piece without screws. You can try oiling the top and bottom of the knob shaft and just working the oil down by rotating the knob SEVERAL times. Hopefully, that does the trick.

@Silentkiler19 3 жыл бұрын

Hi bro ... i have a surfblaster 2 everything is ok but when i tighten the bail screws it won’t they keep spinning...any idea ?

@TSGReelService 3 жыл бұрын

Thanks for watching. If you're talking about the screws at the pivot points, there's possible built up corrosion in and around the holes. See the part of this video where I work on the bail assembly. Hope that helps.

@Silentkiler19 3 жыл бұрын

@@TSGReelService i don’t mean the corrosion ...sorry I meant that the bail holder where you put those screws left and right can’t be tightened they keep spinning cause the holes are made of plastic i think ...what do you think about bigger size screws?? it will be ok ?

@TSGReelService 3 жыл бұрын

@@Silentkiler19 I'm referring to those screws on the left and right of the bail wire. If it's not corrosion then try adding a shim or a little washer between the bail wire arm pivot points and the head of the screw on each side. If the screws that are in there came with the reel, I wouldn't recommend trying a different size. Hope that helps.

@Jimmymag909 Жыл бұрын

You have a video of the thunnus 😢mine giving me issues

@TSGReelService Жыл бұрын

Check my video library.

@Bentonfishing1 Жыл бұрын

Do you do this for a service , if so how do I contact you

@TSGReelService Жыл бұрын

I do local reels. You can reach me at tsgreelservice@gmail.com

@andybowlin 3 жыл бұрын

I have a baitrunner 4000D. Is it suppose to move the spool up and down when reeling??

@andybowlin 3 жыл бұрын

My spool isn’t going up and down when reeling and can’t figure out if it’s suppose to or not. Everything seems smooth on reel and in good condition. Do these not go up and down when reeling

@TSGReelService 3 жыл бұрын

Thanks for checking out the video. Yes, the spool is supposed to go up and down. Check out my video library for videos on how to fix a reel that does not oscillate (go up and down) Hope that helps.

@andybowlin 3 жыл бұрын

@@TSGReelService thanks. I’ll have to check it. I took everything apart and found a free floating round gear and free floating bent spring so I think that’s my problem but too far in and screws and parts everywhere fml

@TSGReelService 3 жыл бұрын

You're welcome. Sorry to hear about your troubles. Take it to your local repair shop to see if they can right the ship for you. Better to eat the repair cost than lose the reel.

@yuritorrico1771 3 жыл бұрын

Can I send you reels for service?

@TSGReelService 3 жыл бұрын

Email me at tsgreelservice@gmail.com and I can let you know.

@bostonbeanman6173 2 жыл бұрын

I imagine the following conversation happened: Shimano baitrunner reel product manger “what are we going to do with all these extra parts?” Shimano architect “hey, I have an idea…”

@TSGReelService 2 жыл бұрын

LOL!!!! Thanks for checking out the video! More to come.