Follow me on my new Instagram Account! instagram.com/punchfishing/

Just bought this rod and the NRX 873crr. Wouldnt have done it without these thorough videos and responses to my questions. Much appreciated!

My favorite spinning rod of all-time!!! Got 3 of these and yes they are worth every penny!!!

Man, I'm glade someone else finally brought up the durability factor. I think it also helps with tip breakage. I've beat up every rod with some sort of wrapping and thier still all good.

I’m learning a lot about hi end gear watching this channel! Thanks

A rod twist usually comes from not building on the spline. There is one point on the rod where has a little extra graphite when rolling the blank. If you build the rod correctly it should not twist

I have an 844c and I’m of the opinion that it’s at the top of the heap in the “all purpose jig” category. What I was hoping for was a lightweight, sensitive, balanced rod that I *wasn’t* afraid to swing for the fences with....that last part is key. You can easily find rods with every other metric but a lot of times, they feel awful to swing hard. I haven’t broken an nrx before but it just looks and feels like it’s screaming “brrreaakk me, that’s right...do it!” The conquest feels like it actually wants you to swing harder, just so it can prove that you’re not “man enough” to break it. That was exactly what I wanted and a year in, it’s delivered in spades. And I’ll repeat it, since it’s in the video. DONT PAY FULL PRICE. Buying a rod like this is like buying a car. Only doofuses pay full price. I know there are some guys who hate it when you give out this info but so be it...I don’t really care, myself. Bass fishing shouldn’t be some elitist fraternity where only a “select few” can access the “Illuminati level” info...that’s some bullshit, imo. I got my 844 for just over $400...and at *that* price, it’s worth it all day. I won’t say HOW, because I like my sources and want them to remain so this info isn’t a total free for all. Just know that if you’re resourceful, do your research, talk to people and you’re generally a good hang, you can end up with some killer equipment at prices that most guys don’t think is possible.

I have a Conquest 843c & and Xtasy 723c & 755c, the tips on the Xtasys are much softer than the Conquest. Xtasy looks better, but I like being able to put two fingers on the exposed blank under the reel seat on the Conquest as apposed to just one with the Xtasy. I also like how the Cork on the Conquest is tapered a little and it seems to have less filler than even the Xtasy. I like the look of the aluminium locking nut cover on the Xtasy better than the Conquest. But, the Conquest is 3.8 oz and the Xtasy is 4.6 oz, and the Conquest is a little more sensitive and powerful. I'm now using the Xtasy as a Finesse rod and the Conquest as a Jig and T-Rig rod.

While handling all rods with these carbon wrappings and comparing the rods that don't have it. I believe the biggest telling benefit is the power. They can make thinner/lighter blanks while maintaining power. The 902 Conquest is a good example, it has a very soft tip like what you'll find on a ML rod, but has a medium backbone.

Really enjoy your gear reviews, you do a great job. Yeah the conquest is a crazy stick. Super light and feels stronger than a similar rated nrx. I'd really like to have a spinning version, love the look and the handle/reel seat design. The durability is no joke. I have an 843c that I've been playing with for the last couple years now and you would not guess that it's been bank fished with, in and out of a kayak and an aluminum boat. Even with good care taken most rods would show some signs of being used in those situations but my conquest still looks almost new.

I have to say after using this rod for quite sometime and I paired it with a Stella I absolutely love it but I love my st. Croix legend x more. I don’t think the price point of 700 is worth it but the quality is amazing. This is the kind of rod you buy when money doesn’t really matter and you just want to hold onto a 1400 dollar wand. Makes slow days of fishing seem better lol

I used to hate spinning rods until I just got the 6'11" Adrena spinning rod, and I fully understand when you say that rod makes you happy.

Love that you used the Tatula LT with this rod...I do too. I have swapped most of my stradic's & Vanford's to the Tatula LT. Well done man!

Ahhhhh, back to reality. From 13 Fishing to the Conquest. That's more like it. Always find your rods reviews to be objective and honest, no fanboy bias. Well done. Can't wait to hear about the new Megabass rod. Any experience the Daiwa Rebellion on or the regular Tatula??

Great review. I love this rod and the baitcasters. But I also luv my NRXs and my steedz rods equally. Lol

Awesome review! Do you ever go further north and fish Pelican Lake in St Louis County?

Awesome Video!! Thanks for doing one on the Conquest. Have you heard any pros and cons on the St Croix Legend Elite series? That’s a $400 rod but not Croix’s high end, however it does have the Torzite guides on it.

Been waiting on this one. Great review! I have one and been waiting to hear your thoughts on it. I’m looking to get a drop shot rod for 3/16 or less and would like to see a review on the Expride 7ft lite+ that you used for hair jigs and your thoughts if it’s good for dropshoting.

Nice Review. I never liked the spinning reel seat on the NRX, it doesn't feel right in my hand. The Conquest handle looks more comfortable, but for $700 ? OUCH! I'd rather keep my old Shimano Crucial and Cumara rods. 😁

I'm looking forward to my 782S showing up thos week. Got an NRX 852s. Can't believe how much lighter it's gonna be than my NRX

Good video. I just recently got an NRX 803s but havent fished it yet. I plan on getting the Shimano Vanford when the model I want is available. Question, what line do you like to use on your spinning reels? Thanks!

Hi Brian, if you had to choose between the NRX+ 852 and this Conquest 842, and you were going to use it primarily for wacky rigs and secondarily for drop shot and ned rigs, which one would you choose?

I just picked up this same rod. Been waiting for your review on it. Paired it with my Excense 3000. I really like it, but I think I like my 7’ M Expride w/2500 Certate just as much....

I’m looking to buy a poison adreana 7’3 Med heavy for 3/8 jigs do you have any info about it

"This rod makes me HAPPY" lol

How many conquest rods do you have and are you planning on buying more. Please give updates on this rod. Thank you

Which 2020 Destroyers do you have coming? I laid hands on the F5st-65XS today and was super impressed.

On my scale, the p5 x-bites weight in at 3.7oz. although it's not a spinning rod.

Great Video!! I was wondering if you have any experience with casting conquest?

I wish Megabass would put better cork into their rods like g loomis. Sucks to have small filler amount on a brand new Orichi Whipsnake fall out along the cork to plastic on a the grip (bad spot to have filler in the first place) even sealed with U40. Anyways, Good review on the rod. It’s to know about some of the higher end rods because of the limited amount of info on KZfaq about them. I wish I had a local shop that could give me discounts on G Loomis Rods.

Any thoughts on the 842C?

In your opinion what rod is better g-loomis conquest are the Daiwa steez s AGS. 7’6” med/light/med I have the reel Daiwa luvias Airity LT 3000 which rod would be better on that reel bass fishing Ned rigs

FINALY had time to watch full video . I totally get being a rod snob . I’m that way also with rods & reels .. but I do have a cut off point .. just refuse to go $700 .. $500 is my max and that was for my Dobyns Xtasy . I totally get that this rod was made for me feeling .. I’ve two like that .. the shimano poison adrena & Dobyns champion extream ( jig rod ) I swear they were made for just “me” 😉... enjoy your conquest- I get it - I do .. i just refuse to pay $700 for a bass rod

You should try the Daiwa Steez AGS rods. They are very sensitive and light.

How does the conquest compare in sensitivity to nrx?

i paid $500 for my 842s on ebay. definitely worth it!

Soooo where exactly do you get the 20-30% off of these rods? None of my local shops carry these so walking into one and asking for a discount isn't an option. I was able to buy one used for $500 but if I can pay the same for a new one I'm definitely interested! Do you know if Shimano also offers discounts on their reels? P.S. Nice shoe game too!

Is this a light enough power to throw a drop shot? I understand it wont be ideal but im looking for all purpose spinning rod that could throw drop shot and weightless senko.

So after both review on nrx 872 and the conquest 842. Which one would you rather fish with? Debating on picking anther 872 or conquest 842

Great vid. I’m not looking for a conquest. My wife would devorce me Lol but I am looking for a 7’ M Expride spinning rod. With the COVID crap going on everyone is out of stock. Do you know where a fella could find one by chance?

Hiw donut compare to the destroyer evolutions

I believe it is a nice rod that makes you smile and Shimano is a great rod and reel manufacturer But....for (almost) 700$ NO WAY, even 500€ i think i pass. Looking forward to the P5 review....Now THAT’s my cup of tea. Megabass, Tenryu, Hearty Rise.... I’m Sold 🙃🙃🎣. Which baitcaster reel you recommend and do you need a DC reel in your arsenal?

Hey there- was hoping you could help me with some rod selection for a new baitcasting setup- here are the baits I'd like to throw on this rig: -3/16. and 1/4 oz Uoze swim jigs with ~3.3-3.8" keitech trailers -3/16 oz. 3/0 owner weedless rigged underspin with 3.8" keitech or 4" spark shad -1/4 oz. minimax chatterbait + 3.5" trailers -The new 4" topwater Zman GOAT Toadz rigged on a 4/0 EWG weightless -3/8 oz. spinnerbait -3/8 oz. dark sleeper -3/16 or 1/4 oz. finesse jigs + 3-3.5" trailers -3/16 to 1/4 oz. texas rigs + 4" plastics Do you think it makes more sense to go with the 842c or 843c for these applications? My main concern is that because some of these baits are closer to the lighter end of the range on the 843c that they will not adequately load- even though it would probably make most sense to have a Medium Heavy to drive some of the larger 3/0 and 4/0 hooks home on the swim jigs, texas rigs, and topwaters I intend to throw. As someone who has had experience with more high end tackle than me I was hoping you could help! Thanks!

Have you considered getting a Megabass Valkyrie spinning rod for a review?? I love my NRXs and Megabass. Haven’t been convinced to go Conquest...

How do you get 25% off

You plan on getting one of those new st croix legend extremes and making a vid?

Getting a craving for NRX plus. Because of length and action I'm leaning to the 842 SJR. Do you feel the NRX plus 842 would be similar to the 842 conquest?

Price points mentioned in your video $450 to $500 sometimes. Tell me more please? I have two and thinking of getting a third. I looked everywhere and cannot find a lower price than $650. Pretty good salesman but never able to get a discount. Would love to hear where you are seeing these lower prices. thanks, Mark

Would you recommend that rod for texas rigging or shaken head?

I always hear you say buy at your local tackle store. What is your local tackle store i want to go in and get me a good fishing rod too and get 20% off. By the way I'm from MN as well.

Question for you man. If you could get the 7' Expride M for $120 or this rod for $280 what do you do?

Was wondering if you knew the difference between SJR vs JWR vs MRB etc. Maybe a future vid 🤔?

What's the warranty like?

How do you think this rod compares to the NRX+ 842s

You love that rod... it's obvious and you're a legit critic...6 months in it's my favorite, too! Cheers

Xzoga blank is the best

Have you tried FX CUSTOM Rods

I have this rod in a different model. Why would you beat the crap out of this $700 rod? I baby this rod. I don't allow it to rest against any potentially abrasive objects. I also wipe it down after use. GLX & Conquest side by side, I couldn't feel any differences. I bought it just because I got some extra cash.

I dropped a like on your video.

Bud this rod has the components assembled by Gloomis and the tapers are designed by Gloomis. The blank are built by Shimano and sent to Gloomis for final assembly 🤨

You put a shimano vanford on there and it will cast better and be lighter!

I still don’t understand why Shimano didn’t use the nrx guides. Those guides looks better and feels better

Short answer, great rod, but no, not worth the asking price. And I LOVE GLoomis.

Higher resell on an nrx vs a conquest?? What are you smoking lol the conquests are on average $80-$100 more expensive.

For $ 700 this stick is for rod fetish, not for anglers))

Shimano products are all over priced

I love this rod but I’m a shore banger. I’ll buy this rod when shimano starts putting nrx guides on them. Hope shimano hears this. Besides the nrx guides are better. A few grams more isn’t going to hurt. People will still buy it.

Higher resell on an nrx vs a conquest?? What are you smoking lol the conquests are on average $80-$100 more expensive.