Shimano Deore Freehub Body Replacement FH-M525

Рет қаралды 7,793

Жыл бұрын

With the rising cost of bikes it is essential to keep them rolling as long as possible. In this video I will walk you though the process of replacing a freehub body on a Shimano Mountain bike hub. This should be the same process for most old cassette hubs. I will be doing more bike repair videos over the next few months.
The Tools you will need:
Cassette lock ring tool.
chain whip.
15mm cone wrench.
17mm combination wrench
10mm allen wrench.
vice and soft blocks.
cleaning rags

Пікірлер: 37

@zozocreek8327 Жыл бұрын

Awesome watching the wizard at work. 🧙🏾‍♀️

@markymarkpowpow

excellent video and instruction was very well explained! thank you!

@UniMyra

Got it done. Thank you 😀

@toddburdette Жыл бұрын

Thanks for EDUCATION 👍AlWays AweSome Vid,

@lukasrglukasrg29

Hi,I know it`s one year old movie,but can the loose bearings in this hub model be replaced with cartridge bearings?

@hanhtar9062

Thanks mate!

@JacekRapacz Жыл бұрын

Thanks for the video. Does the M525A freehub body fit the M525 hub? I have an M525 hub and the drum fell apart. Only M525A are available but I don't know if they fit.

@PaulWhitcomb-ty6md

My M525 rear has 3-piece seal rings on each side; a retainer ring, a rubber ring and center, metal ring. Can you tell me where these fit? My wheel is binding when I tighten it. I am working from the drive-side. That is an error, I know.

@cmcmillan22

Hey Man this video was widly helpful, do you have a source on new freehubs for these hubs? can't seem to find one? has Shimano changed the part number on them?

@Triplex5014 Жыл бұрын

In the video you say 10mm allen socket and in the description it says 11mm allen wrench. Is it 10 or 11?

@marlonfelipe0624 Жыл бұрын

Is it possible to convert it xd or microspline? Thanks

@_fitbeats Жыл бұрын

Which is more good m525 or m525A

@ender4903 Жыл бұрын

How does a bad hub manifests itself?

@ahahahahahaahahaa Жыл бұрын

What size bearings were those?

@kendallwalter4877 Жыл бұрын

𝙥𝙧𝙤𝙢𝙤𝙨𝙢 😆

@GW2_Community_Is_Autistic

Any idea if a microspline freehub can be installed into these? Have the FH-M525A on my bike, and just got a 12 speed deore. Now not too sure if i need a whole new hub and rebuild the wheel, or just get a microspline freehub.