Shimano Saint Brake Bleeding Service | Maintenance TUTORIAL step-by-step 🛠️

Рет қаралды 23,390

Күн бұрын

In this video i will show you how i did the bleeding of my shimano saint rear brake. Happy maintenance, happy watching, leave a like and please subscribe to the channel for free to not lose future contents! Enjoy!
#shimano #saint #bleeding
SUBSCRIBE HERE 😉: bit.ly/3hwWxrP
My Amazon shop for ideas: www.amazon.de/shop/snowft86
00:00 Quick Intro
00:10 Brake Preparation
01:39 Bleeding Preparation
02:53 Bleeding Procedure
05:00 Brake Reinstallation
Tools🔧
- Pick if needed (to remove the retaining clip of the pads): amzn.to/35FuDqa
- 2.5mm, 3mm, 4mm and 5mm hexagonal key: amzn.to/3tiGVwQ
- Torque Wrench: amzn.to/3Ht1nA0
- Tyre lever: amzn.to/3vvDDsS
- Bleed Spacer
- 7 mm wrench: amzn.to/3tiOvr3
Products🚲
- Shimano bleed kit: amzn.to/3KpNZ1F
- Shimano mineral oil: amzn.to/3HtwkE5
- Paper Towels
- Gloves (if you want to use them)
- Isopropyl alcohol (i personally use Mucoff disk brake cleaner): amzn.to/30IlHy0
Registered with Canon 90D + 50mm Macro @1080p 50FPS + tripod.
➡ If you liked the video, please leave a like and subscribe! 👊🏻
➡ If you have any suggestion on how i can improve my riding skills or my channel (there is no chance for my English, sorry!), please leave a comment! 👊🏻
➡ If you know an area that i did not cover in my vlogs, please let me know! 👊🏻
- Shimano Saint Brake Bleeding Service
- Maintenance TUTORIAL step-by-step 🛠️

Пікірлер: 43

@OresteCiotoli 2 жыл бұрын

I hope you will like the new video setup 😁, happy maintenance!

@99MrJ99 2 ай бұрын

For anyone looking at this. Immediately go to Santacruz syndicate brake bleed tips and learn a gravity bleed. Super Simple and effective. No messing about with syringes and tubes.

@jdb6speed Жыл бұрын

Finally a video with clearly outlined steps, that doesn't make hydraulic brake bleeding seem like some cross between engineering for spacecraft and surgery. Thanks!

@OresteCiotoli Жыл бұрын

I always try to get to the point, good that you liked it and thanks for watching man! 😎🤝🏻

@ckMTB 2 жыл бұрын

A very cool and helpful video Oreste, good job. Thanks for sharing and keep up the good work. Have fun on the bike and ride on

@OresteCiotoli 2 жыл бұрын

Thanks a lot Christoph🤝🏻😎

@trailbuilder5789 10 ай бұрын

Thank you for the info about the free stroke and the reach knop! Most other tutorials forgot about that, but i remembered that there must be sth.... And you showed it, you're the man!! Thank you again and have some good rides 🤘

@OresteCiotoli 10 ай бұрын

Glad that I helped man 👊🏻 I always try to study as much as possible before doing a proper tutorial! Have some amazing rides you too! 💯

@SimplePleasuresMTB Жыл бұрын

Very clear and thoroughly explained. Thanks

@OresteCiotoli Жыл бұрын

You are welcome 🙏😎, thanks for watching

@Danielxperez14 5 ай бұрын

Fast and straight forward, thank you!

@OresteCiotoli 4 ай бұрын

You are welcome!🤜🏻😎

@TrailTales 2 жыл бұрын

Nice vid Oreste! Well put together this one mate! :D

@OresteCiotoli 2 жыл бұрын

Thanks 🙏👍🏻😁

@pandugofast Жыл бұрын

Concise, well illustrated, cheers.

@OresteCiotoli Жыл бұрын

Thanks Pandu! 💯👊🏻

@joaoferreira4672 Жыл бұрын

Very simple and well done cant wait for my Saints to arrive it Will be a huge differance from Two Piston XT to 4 Piston Saints which seems to be the most powerful Shimano Brakes

@OresteCiotoli Жыл бұрын

You will be fully satisfied, i can tell you 😉

@guspam5982 Жыл бұрын

Thanks a lot! Very helpful to help bleed my new brakes

@OresteCiotoli Жыл бұрын

You are welcome Guspam, thanks for watching man 👌🏻

@pvflyer67 Жыл бұрын

Helpful, thanks

@OresteCiotoli Жыл бұрын

you are welcome! 👊

@YanDoroshenko 3 ай бұрын

Very good instructions, thanks a lot. Just bled mine, rear feels great, but the front seems to require one more bleed.

@OresteCiotoli 3 ай бұрын

Thanks 🤜🏻, yes sometimes can happen and you have to redo the steps, maybe you missed something

@benjamindurand8662 2 жыл бұрын

Merci pour ta vidéo très explicative, comment a tu fixé le Shifter de vitesse au frein stp? Merci

@OresteCiotoli 2 жыл бұрын

Hello Benjamin, this depends on the type of shifter you have! I have a I-SPEC B shifter and i do not require anything additional, but maybe you would need this one: www.bike-components.de/de/Shimano/Schrauben-mit-Mutter-fuer-SL-M670-M780-M820-M980-I-Spec-B-p39567/?o=100001-universal-universal#module-product-detail-reviews

Жыл бұрын

When you screw the cup for the first time, if you leave the plunger with a bit of oil, it traps the air out

@OresteCiotoli Жыл бұрын

Good advice, thanks! 🙏

@WattageWheels 2 ай бұрын

My fluid is leaking out of the bleed port and not going into the tube

@OresteCiotoli 2 ай бұрын

Maybe you opened too much the port?

@hainman1 Жыл бұрын

Did you screw the free stroke screw all the way back in when finished ??

@OresteCiotoli Жыл бұрын

Yes almost, as it was before

@Danielxperez14 4 ай бұрын

I tried this method with my saints and they still feel spongey, should I be pushing the fluid up and down a few times to get all the air out?

@OresteCiotoli 4 ай бұрын

Yes, this method should be bulletproof 🤜🏻

@dr.martinamayer5423 Жыл бұрын

what happens if you bleed with the brake pads in?

@OresteCiotoli Жыл бұрын

Overall you can definitely do it Martina, nothing change BUT: you have to be very careful with mineral oil, if it's going to the pads or discs then you have problems 🥲

@gianlucacomunelli7324 2 жыл бұрын

sei passato dai CODE ai SAINT👏🏻?

@OresteCiotoli 2 жыл бұрын

si dopo aver provato gli RSC ho affiancato i saint perchè mi sembravano TROPPO deboli, e per me non ci sono dubbi su quale freno sia il migliore. Nelle prossime settimane testo i saint con pastiglie e dischi galfer!

@gianlucacomunelli7324 2 жыл бұрын

@@OresteCiotoli ti capisco 😂 sulla bici da xc ho un paio di shimano e quando ho preso quella da enduro con i Guide la prima cosa che ho pensato è che andavano cambiati…stavo pensando a un paio di SLX a 4 pistoncini

@OresteCiotoli 2 жыл бұрын

@@gianlucacomunelli7324 credo che sarebbe un'ottima scelta!

@stefanoscovazzi7268 2 жыл бұрын

ma perchè non parla in Italiano ?

@OresteCiotoli 2 жыл бұрын

eh Stefano perchè faccio tutto in inglese, sia i vlog che i tutorial della manutenzione. Questi ultimi li avevo iniziati a fare in entrambe le lingue anche in italiano, ma attualmente è troppo lavoro e non riesco a fare tutto!

@stefanoscovazzi7268 2 жыл бұрын

@@OresteCiotoli grazie :-))