Shimano Saragosa SW6000 - How To Take Apart, Service & Reassemble

Рет қаралды 13,747

Жыл бұрын

In this comprehensive video, I take you step-by-step through the servicing process for your Shimano Saragosa SW Saltwater fishing reel. From cleaning and lubricating to replacing worn parts, I cover it all. See below for helpful equipment and supply links. If you found this video useful, please show some love by hitting the thumbs up button and consider....
Hitting the Thanks button under the video
or my PayPal tip jar:
PayPal.Me/TSGReel
Amazon links (containing "amzn.to") and eBay links (containing "ebay.us") below are affiliate links. If you purchase ANYTHING through these links, I may get paid a commission. Help fund my future endeavors by using them when you purchase.
AMAZON main page - amzn.to/46qttJS
EBAY main page - ebay.us/3BvTqi
Shimano Saragosa SW Reels For Sale on eBay:
ebay.us/TMu5wS
Shimano Saragosa Reels For Sale on Amazon:
amzn.to/45eJu4q
The mini screwdriver sets I use spin freely in the palm of my hand, which I prefer for speed.
MINI SCREWDRIVER SET (eBay)
ebay.us/QbICC9 (Spinning - Option A)
ebay.us/STpQDI (Spinning - Option B)
ebay.us/xvTFRx (Non Spinning)
MINI SCREWDRIVER SET (Amazon)
amzn.to/3r8NdBF (Spinning - Option A)
amzn.to/43ZpJ0g (Spinning - Option B)
amzn.to/437CsN8 (Non Spinning)
See my community page for links to parts suppliers:
www.youtube.com/@TSGReelServi...
I, generally, use a ratcheting, interchangeable regular-sized screwdriver for the initial loosening of screws. Here's a link to the brand I use:
amzn.to/440Bwvb
Get some additional, varying sizes Flathead and Phillips bits while you're at it.
The adjustable wrenches I use (instead of hex nut wrenches) are Husky, but these (with the red insert) work very well... 6-inch will be used the most:
ebay.us/CKiSM7 (eBay)
amzn.to/3PAbkTT (Amazon)
Paper towels I Use:
ebay.us/Hi2pWc (eBay)
amzn.to/48udknh (Amazon)
Gloves I use:
ebay.us/4CDP89 (eBay)
amzn.to/3SeAbgY (Amazon)
If you prefer to use hex nut wrenches, I'd recommend angled/offset ones, like these:
amzn.to/44ljUtL
or a pass-through socket wrench set, like this:
ebay.us/ygHAQo
Hex Wrench Set (non-affiliate link):
www.lowes.com/pd/Kobalt-14-Ke...
********************************
Other Videos You May Like:
• Penn Spinfisher 9500SS... (Penn Spinfisher 9500SS Tutorial)
• Penn Battle 6000 Spool... (Penn Battle 6000 Repair)
• Penn Slammer III 9500 ... (Penn Slammer III 9500 Tutorial)
• Abu Garcia Ambassadeur... (Abu Garcia Ambassadeur 5000 Tutorial)
• Daiwa BG13 Spool Metal... (Daiwa BG13 Repair & Tutorial)
• Daiwa Sealine 600H Fis... (Daiwa Sealine 600H Tutorial)
• Shimano Thunnus Ci4 12... (Shimano Thunnus Ci4 12000 Repair & Tutorial)
• How To Service Your Sp... (How To Service Your Reel In Under 20 Mins)
• Shimano TLD 25 Fishing... (Shimano TLD 25 Tutorial)
• Penn Spinfisher 650SSM... (Penn Spinfisher 650SSM Tutorial)
• Shimano Spheros 12000F... (Shimano Spheros 12000FA Tutorial) • Penn International II ... (Penn International II 50SW Tutorial)
• Shimano Sustain 4000XG... (Shimano Sustain 4000XG Tutorial)
********************************
Micro Hex Wrench Set I Use:
amzn.to/3pr0xAO
Torx Wrench Set:
amzn.to/436tEHw, plus a back-up set for my ratcheting screwdriver:
amzn.to/3NUtFKn
Reel grease I use:
ebay.us/AtmVUv (eBay)
amzn.to/46p4p66 (Amazon)
Drag grease I use (brown for warm weather, purple for cold):
ebay.us/WU7NOh
********************************
Quick links to navigate my channel:
Main Channel: / tsgreelservice
Video Library: kzfaq.info...
Individual Playlists: kzfaq.info...
********************************
Oils I use:
ebay.us/RLtGzV (eBay)
amzn.to/3PubkVA (Amazon)
ebay.us/I3NXpx (eBay)
amzn.to/44kjdkz (Amazon)
Stainless Steel bearing cleaner:
ebay.us/hwU2YS (eBay - the red one)
amzn.to/4467s1q (Amazon)
Ultrasonic Cleaners. 3 liter or above:
ebay.us/olT4J6 (eBay)
amzn.to/3NusJuD (Amazon)
Small parts mesh basket for ultrasonic cleaner:
ebay.us/cmvoe8 (eBay)
amzn.to/3NuycBM (Amazon)
Ultrasonic cleaner additives (use in moderation):
amzn.to/444EaQG (dish liquid)
amzn.to/43bYZIY (heavy duty cleaner)
amzn.to/440wcZ5 (alcohol)
One of the bearing greasers I use... contact Alan directly (non-affiliate link):
alantani.com/index.php?topic=...
Workshop Overhead Light:
amzn.to/44fxbo0 (Amazon)
#TSGReelService #FishingReelRepair #shimanofishing #reelrepair #reelmaintenance #shimanoreels #fishing #fishinglife #shimanosaragosa #reeffishing #shorefishing
‪@TSGReelService‬

Пікірлер: 73

@TSGReelService 8 ай бұрын

Appreciated the video content? Want to show some love? Hit the Thanks button under the video or hit up my PayPal tip jar: PayPal.Me/TSGReel

@Seacoast68 4 ай бұрын

IMPORTANT NOTE: The 6000 'gosa does not have a self closing bail!!! After disassembling, cleaning, and reassembling my reel along side this video I spun the handle and my bail didn't close. Figured I must have messed up the bail spring and/or trip arm assembly. Took it apart and reassembled the bail spring area 3 times and it still wouldn't self close. As it has been 4 months since my last fishing trip, I had completely forgotten the 6000 does not have a self closing bail. The "bail trip lever" does not actually "trip" the bail. The lever's purpose is to extended down onto the friction ring when the bail is open to keep the rotor from spinning while you are casting. p.s., your videos are my must-watch when servicing my reels. Very informative and well produced. Thanks!

@TSGReelService 4 ай бұрын

Thanks for the love and sharing this detailed comment, brother! Sorry if I didn't point that out, of if I implied that it had an auto-flipping bail. P. S. - Hope you caught some nice fish the last time you were out there.

@tad3716 Жыл бұрын

Thank you for the very detailed tutorial. I think the complexity of that reel is beyond my ability. Have a great week! Tad

@TSGReelService Жыл бұрын

You're welcome and thanks, Tad! Good to see you're still hanging out with the channel! I disagree..... you can do it. Enjoy the long weekend coming up. See you on the next video.

@FloridaFishingAdventures 11 ай бұрын

Absolute best Saragosa maintenance vid on KZfaq, great job! Had an issue where I took mine apart and anti reverse wasnt working, watched your vid and saw I put the washer on the wrong side of the spacer that goes in the AR stack. Watching your vid showed me the right way, thank you! Subscribed!

@TSGReelService 11 ай бұрын

Thanks for the love and sub! Glad to hear it was able to help you out. Spread the word about the channel and keep up the good work on your own channel!

@stevecarrero4120 Жыл бұрын

Like I said before sooo many pieces and parts in Shimano reels. 🤯 Thanks for the video. I haven’t been feeling well the last 3 or 4 days and this took my mind off things for a while.

@TSGReelService Жыл бұрын

Sorry to hear you're not feeling well, Steve. Wishing you a speedy recovery. Glad you could disconnect for a bit while checking out the video. I still disagree and think you can work on them. 🙂

@TSGReelService 4 ай бұрын

Hey Steve. Haven't hear from you in a while.... hope all is well. Barry

@stevecarrero4120 4 ай бұрын

@@TSGReelService Thank you for being concerned about me. I’m well, just very busy these days. I haven’t been paying as much attention to KZfaq as before. But going forward I’ll be definitely looking out for your future posts. 😊 I really appreciate the fact that you are wondering if I am ok.

@TSGReelService 4 ай бұрын

@@stevecarrero4120 Glad to hear all is well, Steve. Your name popped across because I was searching for a comment on this video and I realized I hadn't heard from you and the last time you said you were under the weather.... just wanted to make sure. And, I get it.... life happens..... things that were important at one point no longer have the same importance. Just happy again to hear you are doing okay.

@geoeconomics5629 Жыл бұрын

Nice reel , cleaned to bits

@TSGReelService Жыл бұрын

Thanks! I appreciate you taking the time to watch.

@j0-k3r.c.r.19 4 ай бұрын

Thank you very much Sen-sei, your videos are useful and important for me and my work. When I have a problem with a reel you help me solve it. Thank you Master 🙏🏻😁👍

@TSGReelService 4 ай бұрын

You're welcome! Thanks for watching and your patronage. Happy to hear they're serving the purpose. What do you do?

@fender231000 5 ай бұрын

Hi there. Cool video thanks learned a ton

@TSGReelService 5 ай бұрын

You're welcome and thanks for watching and taking the time to comment! Hit the thumbs up and spread the word about the channel.

@catherineromeo4891 Жыл бұрын

Great video very clear on explanation I actually did my reel w/video Thank you for sharing your knowledge 👍👍 subscribersd & liked

@TSGReelService Жыл бұрын

Excellent Catherine! Happy to hear it helped you work through the reel. Thanks for the sub and like. Spread the word about the channel!

@pfv3462 6 ай бұрын

Could you perhaps explain how big the difference in fishing reel is between the 6000 and the 10000? or is it just the spool that has more line in it? Thank you for the very detailed tutorial!

@TSGReelService 6 ай бұрын

You're welcome and thanks for checking out the video. Difference between those two sizes? Not that big. It's just depends on what type of fishing you're doing or what your requirements are. The higher you go in size, the larger the fish (theoretically) you can catch. Hit the thumbs up and spread the word about the channel.

@muhikydd5562 5 ай бұрын

Great video and very helpful. I replaced my bearing on the bottom of the pinion gear then when reassembling found the rotor was really tight regardless of how tight I made the top nut, any suggestions on what may be causing this? Thank you very much

@TSGReelService 5 ай бұрын

Thanks for checking out the video. I'm assuming you mean rotor nut.... help me understand.... 1) What specific reel (make, model and number) do you have? 2) Was the reel working properly before you touched it? 3) Why did you replace the lower pinion bearing? 4) Did you do a full service or just a repair? 5) Did you follow my video when you disassembled/reassembled the reel? 6) Does the rotor spin freely if you just place it on the pinion gear without the rotor nut? 7) Post a video on your channel of the issue (without the spool on) for a visual reference, and include the link here in your reply.

@muhikydd5562 5 ай бұрын

Thank you, it is a Shimano saragosa 5000sw and was sounding a little rough. I followed your video and found that the small bearing on the bottom of the pinion gear was rusted out. I got it off and placed a brand new one on there. The reel otherwise ran fine and was not tight when reeling. Upon putting back together, as soon as I place the nut on to of the rotor the handle gets noticeably harder to spin, so I assume that is where the issue lies. I back it off (not tight like you do) and it frees up the rotation a little but nothing like a new reel where you can spin the handle and the rotor keeps spinning. It now stops pretty quick. I feel like I put the reel back together correctly and without the rotor on, the internal reel mechanism runs smooth and quiet now. Any ideas?

@TSGReelService 5 ай бұрын

@@muhikydd5562 If it was fine before and not fine after, something is amiss in your reassembly. Check your trip arm, your friction ring. Try replacing the upper pinion bearing. If none of these help, follow my video closely and redo your entire pinion stack.

@jamesgough6095 4 ай бұрын

Hello sir !! After following this tutorial I believe I missed something.. the upper part of the reel os rubbing on the bottom part when reeling and the handle spins in reverse and in the natural reeling direction.. what is my mistake ? Do you have a clue ? Thank you for the video it’s great I just missed a part or something 😅

@TSGReelService 4 ай бұрын

Thanks for watching and following along. Yes, if you are having these issues, you missed something, somewhere. Assuming the reel was working fine before you serviced it, I would focus on the pinion stack.... make sure everything there is in the correct orientation.... use the reassembly section of the pinion stack on my video as a reference guide. Hope this helps.

@SquidSlayer3000 6 ай бұрын

Is this the same as a 14000 gosa I have pulled mine apart and now putting it back together and it's not smooth and seems to be rubbing any tips Cheers

@TSGReelService 6 ай бұрын

Thanks for checking out the video. Check out min 21:50 on in this video for possible help: kzfaq.info/get/bejne/ZrmBe7lhpsnSqo0.htmlsi=TD9N6qdY10huYPXi You can also try playing with the orbital position of your drive gear. Otherwise, make a video of the ALL the issues you're having, upload it to your KZfaq channel and post the link to it here, so we can see what you're experiencing.

@mohdhafez7208 Жыл бұрын

After you service and see the machine. What you think about this reel? It’s this reel heavy duty and tough to handel the big fish?

@TSGReelService Жыл бұрын

Yes, within reason. Over 25lbs and deeper than 50 feet will be a struggle.

@mohdhafez7208 Жыл бұрын

@@TSGReelService What if I use sw8000? Will the weight of the fish increase and the depth will increase?

@TSGReelService Жыл бұрын

It's more about the material used in the frame than the size of the reel..... but that's just my opinion. Try it for for yourself and see if you like it.

@mohdhafez7208 Жыл бұрын

@@TSGReelService Thank you for the information given to me. It was very useful and informative for me.

@dcbz6596 6 ай бұрын

Maybe I missed it in your tool list, but what bearing puller are you using? Thanks in advance for your reply.

@TSGReelService 6 ай бұрын

Thanks for checking out the video and the description! No, you didn't... it's not there. Unfortunately, the bearing puller I use is not currently being produced. I'll reach out to the seller again in a few months or so to see if anything has changed.

@dcbz6596 6 ай бұрын

Thanks for your prompt reply. I hate to hear that that bearing puller is not currently available. I work on my reels and that would be a handy tool to have at times. I'm impressed with how quickly you can take apart, clean, and reassemble a reel. I perform a full service on my own reels maybe once a year and more often only if needed. It certainly takes me longer to perform a service than it does you. I am also impressed that you are able to perform a full service without colorful language. I certainly haven't reached that level yet. Thanks again for your reply and your helpful videos.@@TSGReelService

@TSGReelService 4 ай бұрын

@@dcbz6596Sorry for the delayed reply here..... your second comment was held for some reason, and I just noticed it. Yes, it is a handy tool.... becomes more important the more I use it. I'm starting to have anxiety about breaking it. 🙂 My favorite tool from the same guy is his bearing puller.... gotten me out of a few jams, but I definitely use the bearing puller more. Regarding the colorful language..... I'm not immune to voicing my "upsetedness" and frustrations, but it's rare. I'm more of the reacting in disbelief (of how bad something is - see the spool breakdown on my Fin-Nor Megalite video) kind of person. Some reels take longer than others, and I also edit the videos to make them more palatable. For me, a full service (rebuild) on a reel takes a minimum of 45 minutes, up to several hours, depending on reel and shape it's in. Stay tuned for more videos. If I find out the person starts making the tools again, I'll make a video or make a post, if he's okay with it.

@muddyriverdogz 18 күн бұрын

How do ypou flip the handle from the left side to the right side ?

@TSGReelService 18 күн бұрын

Thanks for checking out the video. Follow the instructions in the video for the opposite side after you remove the cap. Spread the word about the channel.

@ryansu2320 Жыл бұрын

I may have missed it but what grease do you use in the reel?

@TSGReelService Жыл бұрын

Thanks for checking out the video! I use Penn grease.

@LakeMacLocal Жыл бұрын

@@TSGReelService great video! I'm planning now to follow this for my 10k saragosa now I have found this fantastic resource! Regarding the grease needed for the service, I've got the Cal's reel and drag grease that you use for the drag, why do you use Penn grease for the reel gears etc. vs the Cal's reel grease?

@rabbithatethefox 9 ай бұрын

would the saragosa sw10000 be the same to service?

@TSGReelService 9 ай бұрын

Yes, pretty much. Can't really think of a significant difference.

@jarredmouton1356 Жыл бұрын

Hi, can you do a full service of a sw20000 gosa.

@TSGReelService Жыл бұрын

Thanks for checking out the video. Check my video library for what matters with the 20000. Spread the word about the channel.

@user-co1bq4sq5m 6 ай бұрын

I have a question where do the washers go that come with the reel

@TSGReelService 6 ай бұрын

Sounds like spool washers, but I don't know unless you get more specific. Make a video of what you're referring to, upload it to your channel and post the link to it here, so your question can be properly answered. Thanks.

@user-co1bq4sq5m 6 ай бұрын

@@TSGReelService yes the spool washers

@TSGReelService 6 ай бұрын

@@user-co1bq4sq5m They go on the shaft just below the spool if you need them to adjust your line lay.

@ddube1407 Жыл бұрын

What is the name and source of the tool that looks similar to tweezers

@TSGReelService Жыл бұрын

Thanks for checking out the video. I think you're talking about the bearing removal tool.... not currently being made. Sorry.

@geraldsaved Жыл бұрын

Are you in FL

@TSGReelService Жыл бұрын

What zip code are you in?

@geraldsaved Жыл бұрын

@@TSGReelService hey just bought this reel used. How much for a service ?

@jimyaj78 25 күн бұрын

NEED HELP. I FOLLOW YOUR INTRODUCTION AND NOW THE REEL SPINS IN REVERSE AND FORWARD. Thank you

@TSGReelService 24 күн бұрын

Thanks for checking out the video. What specific fishing reel do you have and what prompted you to want to service the reel?

@jimyaj78 24 күн бұрын

@@TSGReelService saragosa 6000sw

@jimyaj78 24 күн бұрын

I go 1 a year to Sebastian inlet and just what to service it

@TSGReelService 23 күн бұрын

@@jimyaj78 👍

@TSGReelService 23 күн бұрын

@@jimyaj78 If the reel was working properly before you "followed" my tutorial, then it should work the same after. If it doesn't, then either something was wrong with the reel before, or you didn't follow my tutorial. Try watching (and following) it again if the reel was working before.

@philproud7254 6 ай бұрын

Nice work,what is your address and i will send you a new grease brush :)

@TSGReelService 6 ай бұрын

:) Thanks for watching! I appreciate the offer, but if you check out my most recent videos, you'll see that I've already changed brushes. Feel free to drop a tip if you'd like to contribute. :) Hit the thumbs up and spread the word about the channel. Thanks again. P. S. - I LOVE(D) that orange brush.

@philproud7254 6 ай бұрын

Thanx for the reply I’m glad you have a new brush 😊I have just found your videos and they have helped me service my reels the correct way. Just 1 question, what grease and oil should I use on a Daiwa Saltiga? And do you use the same grease on the drag washers as you do on the reel internals? Cheers Phil @@TSGReelService

@TSGReelService 6 ай бұрын

@@philproud7254 No worries. Glad you found them and are able to put them to use. No, I don't use use the same grease for the drag washers and the gears. Check out the video description for the greases and oils I use for reels. Thanks again, Phil. Barry

@philproud7254 6 ай бұрын

Hi Barry can't find the greases and oils I use for reels video ?

@TSGReelService 6 ай бұрын

@@philproud7254 hey brother.... it's not a separate video.... see this video description fro the info.