A very good summary :) Thank you.

Thank you :)

Thank you 🙏

Thank you! 心温かいコメントありがとうございます。Enjoy!

Will try and do that, usually try to, but not sure I did not add the sizes here :/

Hi, with all the different options for fits, it's can hard to get that across. My advice is to check multiple reviews online to see what others are packing, rather than just the kit we show in our images (it can be limited). We will have more video coming though. And thank you!

Yes, the Core Units in all three sizes link up to the side access door.

I do not know why they do what they do (maybe you answered that question yourself) but I know why we do what we do... kzfaq.info/get/bejne/p6iSZtB-ldzNfqM.htmlsi=d5GkUUMG8ti50caa

It will not be available as separate purchase but yes some are cross compatible - just depends on the size.

I would not say that is heavy for a feature filled bag, but we all have a different take on things. Aluminum frames work great.. we would have a belt with if we thought it was needed but it's not and keeps it simple and tidy. Thanks

The 30L will be a great fit for this, but you could also get this into the 25L

Hi, our thinner dividers used in the mountain lines are made with compression molding. They start out the same size but are compressed in manufacturing. Presuming your camera gear is heavier than the divider, the UE divider will also compress to the needed depth. It just does it in your bag - not the factory. The UE style actually contours to the shape of your gear and is arguably a better/cozier fit for a wider range of shapes.

Pretty much any pack (of ours) under 30 will go under.

The Urban Explore packs are not designed to fit a large gripped body in any configuration, with or without a laptop. The Core Units are 5 inches deep, so not suitable for a Z9, which is as large as any gripped DSLR. To fit a gripped camera like a Z9, you'd need to look at our packs that fit the DSLR Core Units, such as the Explore v2 35, and the Action X40 and X50.

Only your own belt options. There is no belt that comes with these packs, And just incase you missed it there is side access.

If you provide some dimensions I may be able to help but with out them, there isn't much I can offer.

March 1st is the global release date.

The door is not a rectangle, so the dimensions vary. It is about 5" deep front to back, and between 7 and 10" tall.

Hi, depending on your LT size, you can use either front or back. Both are protected but keep in mind we are not building backpacks intended for the life of a pelican case or similar bombproof products. If you dropped your pack laptop down on a a big sharp rock or ledge, you might see damage. With that said, anything you add to the front pocket will add protection. So if that was a priority, you can could add to it. Even an extra case depending on you LT size.

@@ShimodaDesigns sounds great, thanks for clarifying!

@@ShimodaDesigns I think the question here for clarification is - which backpack 25L/30L sizes support a 16" laptop in both the front and rear pockets. If I'm flying on a Regional jet as seen at the 6:17 mark, depending on the size of the backpack and overhead bin space with a laptop that only fits the front pocket, the bag is obviously going to lay front side down. The weight of say a Canon R5 and accompanying lenses would put pressure on said laptop in front pocket. Flying on an Airbus A### or Boeing 7## you can store the bag in the overhead bin on its side. Sincerely, A Devoted Shimoda Fan

Sorry I do not own either to test but from our FAQ - What are the dimensions of the rear sleeve? 20L - 7.75w x 12.5h x .7d in (19.6w x 31.7h x 1.7d cm) Will fit 11-inch iPad Pro 25L - 9w x 13.75h x .7d in (22.8w x 35h x 16d cm) Will fit 12.9-inch iPad Pro 30L - 9.5w x 15.25h x .7d in (24w x 38.7h x 16d cm) Will fit 14-inch MacBook Pro As far as design misses, we can't accomodate every use case scenario in every size bag - especially the smaller ones - we have physical limitations and tolerance to consider. In most cases making something that doesn't fit - fit... means going to the next bigger size. I know everyone wants smaller but the sizes of the tools you carry have final say regardless of what you feel smaller bags should accomodate. Have you tried using the front pocket to carry it? If it doesn't fit in the front of Explore 25 - that is the width of the bag - you would need a bigger bag.

@@ShimodaDesigns Thanks for the quick reply. I backed the UE25 based on that info. I’m one of those iPad Pro only people, and the 12.9 inch iPad is closer to the width of a 14” than it is a 13” MacBook. I had to return the Explore V2 25 because I couldn’t fit the iPad in the laptop sleeve (the rest of the bag was perfect for what I needed, just a bit too narrow for my iPad). The Explore V2 30 was just too much bag for me, so I’m hoping the UE25 will be the Goldilocks bag for me. :) Look forward to seeing it in person.

I would recommend using the available space in the Core Unit for non-camera gear. It's a nice way to keep it organized and easy to access (rather than having to stack gear on top of each). it is unlikely we will make smaller bags anytime soon. IMO they start to look like kids bags on most adults and might be a little 'over-engineered' for carry needs. We also have certain depth requirements with Shimoda bags to meet camera body sizes, so you would have to start chopping the height (or width) which leads to awkward looking ratios. Regards

@@ShimodaDesigns Thank you for your reply. I saw from another KZfaqr that they replaced the Core Unit with a smaller version from Shimoda, so I'll explore that possibility with the 20L bag. I'm not necessarily interested in a smaller or shorter size backpack, but a bag with a practical balance between space for camera gear and for other things we like to take on our global travels. Having to store such items in the Core Unit would defeat the purpose of having a dual role "Daypack" as I could readily do that with my current Mindshift bag. The Tenba seems to achieve the sweet spot as far as balanced use of space. Now if we can just combine that with the level of quality and attention to detail of the Shimoda.

Hi, they are different but perform the same or a similar job IMO. Just different behavior. Yes they are thicker, but EVA dividers start this size and are compressed down and why they are as firm as the feel. It's not a 1:1 comparison but you get the same material amounts just different densities. They have worked well for me. They may not work as well in a Core Unit with out a frame though - but ours have frames. The frame keeps the integrity of the Core Unit while distributing its contents weight and prevents it from collapsing. This lends to the effectiveness of the Dividers. As for taking up more space, they conform to your gear - it's not scientific, but IMO they take up more available space - not gear space. If that makes sense.

@@ShimodaDesigns Thank you so much!

It really depends on the elements/situation but like most bags there are coating so dirt doesn't get into the actual material. It's less about color than the coating.

Hi, there are some variables to consider - but in most situations that I consider normal - it should stand upright. Basically if the front sleeve out weights the main unit it may stumble (like a laptop with no camera inside). But in most situations there is more weight inside than the outer sleeve. The base has a slight angle, so this can cause it fall forward, at the same time the angle will make it a a gentle fall and more of a roll :) Hope that makes - just exercise common sense when putting it down and IMO the bag will be OK.

Not for the KS. But if you check back people do size and color changes and they can become available again.

There are sort of three ways to set-up the Core Unit regarding the side access. The first, and most common, is to link up the side door in the Core Unit to the side zipper door in the pack so they open together in one motion, that way when you open the side door of the pack, you have immediate access to the camera in the Core Unit. The second option, for more security when traveling in an unfamiliar location, is to still have the Core Unit dividers positioned for side access, but to actually keep the Core Unit side door zipped closed inside the pack. That way, if someone were to unzip the side door to the pack without your knowledge, they would hit a wall and not have access to anything. And you can then just link up the two side doors again when you want to. The third option, which is maybe more common for someone on a birding trip where a long 200-600mm is the primary lens, is to just not set-up the Core Unit for side access at all. There is no way to attach dividers inside the pack without the use of a Core Unit. The pack, by design, has no stiff wall structure, nor does it have a velcro-compatible interior.

@@peterwaisnor2241 Thank you for the detailed answer !

Lens pen :)

Correct.

Both can fit a 16-inch (40 cm) laptop.

March in most places. Regards

Not the X70 but yes, any belt that will fit (including Action X and Explore) will be able to pass through. With that said, I have yet to need one and why they do not have them.

1:23 is a Cyanbird by Benro

Hi, it will fit, a touch narrower but will be OK. You can also put a Small DSLR with it. You will have a lot of packing options with this set up including a great non-camera bag.

It's not a matter of the stretchiness of the rear pocket, it's that once you get to 9.5 inches, you're at the max width of the door at the zipper. The read door might not close easily. The rear pocket was not designed to be as large as the front laptop pocket.

Front only

Hi, It is Internal. You can verify the internal dims here: www.kickstarter.com/projects/shimodadesigns/shimoda-urban-explore down towards the bottom.

@@ShimodaDesigns Perfect! Thanks!

Not likely, sorry

Hi March 1st is the global launch date. The 20 is 1.8kg with Core Unit and 1.27 without. All dims are posted on KS page towards the bottom and FAQ: www.kickstarter.com/projects/shimodadesigns/shimoda-urban-explore

@@ShimodaDesigns Thanks a lot for your answer. And I will watch when it will be on sale.

All sizes have the same depth Core Units, please compare your camera to the depth: 10.2W x 13H x 5.1D in / 26W x 33H x 13D cm (these are the 30L dims)

Sorry :) only a month away...

@@ShimodaDesigns I know! I just wish I could have it before a trip

Hi, with all due respect... The 25 and 30 both fits 16" MBP laptops - yes its tighter on the 25, but I think it would call a 'perfect fit' over 'very tight'. We do not make bags to pack laptop cases - but to fit the actual laptop. If that is your need you should size up to the 30L. When items are placed in the bag the spaces around it get smaller - this is just how it works when you put something in a bag. Also the 30L is a bigger bag with a larger space for the laptop - its both wider and taller than the 20 and 25 Liter sizes. Your FYI is not correct. Kind Regards Ian

I thought the same thing about the 30L, except I received this from Shimoda explaining that I needed a bag that said it held a 17" laptop. "Sorry to hear you had an issue. You are correct that the sleeve is not intended to hold a 16” laptop with a protective cover. That would just be a different bag. A sleeve that fits a 16” laptop with a cover is a sleeve that fits a 17” laptop without a cover, which makes the entire bag wider and taller, and then it’s a different size and volume altogether." That's why I looked at the specs of the 30L hoping they mentioned a 17" laptop, but the specs still say a 16" laptop. Based on that, I figured that you didn't sell an Urban Explorer whose sleeve is for a 17" laptop since that was not mentioned in the 30L specs. This being said...I do love the bag. It's the most comfortable backpack I have ever had, and that includes the Peak Design Everyday Carry (which I didn't like at all). As for sizing up to the 30L, I supported this through Kickstarter...can I exchange my 25L for a 30L?

All of our packs can be used without the camera insert and as a regular pack. Urban Explore is a great everyday bag IMO.

Hi - Posted in the FAQ's as well - 20L - 2.8 lb (1.27 kg) 25L - 3.3 lb (1.5 kg) 30L - 3.5 lb (1.58 kg)

@@ShimodaDesignsThanks

What are the dimensions?

Unfortunately we do not have any more bags to add to the campaign, but they will be available at retailers in March.

30 is the new 25 - trust me :)

i already have a 31L wandrd :)@@ShimodaDesigns

Try our website www.shimodadesigns.com

30L

If we make the 20L pack taller and wider to fit the 16-inch laptop, then the volume increases, and it becomes 25L. That's why the 25L pack is the size that fits the 16" laptop. Regarding the Core Unit, you can always remove dividers and then the space is easily usable for non-photo gear.

As that Peter fellow suggests, a Core Unit is great for other gear - considering it shelving, it will only add organization for gear that might not normally have it. Also we are talking a few cm on height and width, it's not much more than the 20.

@@peterwaisnor2241 But Peak Design EVERYDAY BACKPACK 20L can support 16" MacBook Pro. See MKBHD video title "My Everyday Tech: 2022!"

@@cedricphoo Yes, of course. I'm not saying that no 20L pack will fit a 16-inch laptop. I'm saying the Shimoda Urban Explore pack cannot. The Peak Design pack has the laptop along its largest panel, which is the rear panel against the harness, and because of that design decision, the bag has no rear access, nor does it have a removable modular Core Unit interior. Functionally it is just an entirely different bag. Every bag design and configuration allows for a different set of fits and capabilities.

@@peterwaisnor2241 thank you for your great design explanation, they are pretty convincing, I will consider 25L then ☺️

Nothing to fear. They will compress as needed. Our thinner ones are just pre-compressed :) they start the same size as these.

Great!! The pre-compressed ones are the best! @@ShimodaDesigns

Not saying you are wrong but these ones hold there own :)@@PharaohMan007

The have the same feeling from video at 5:46. I checked that my Explore v2 has a thinner ones, "precompressed" :)

The bag is quite water resistant and comes with a rain cover. Snow for the most behaves the same as rain except when it collects in heavy storms and the pressure pushes itself through. That's a rare scenario in my opinion and one that is easily a manageable by shaking the snow off and maintaining the packs DWR coating. Otherwise I don't think you will any issue based on my experiences with snow. But I also would not move to the Arctic with it and live in an igloo ;)

@@ShimodaDesigns ok. 👌 will it be ok if bringing to travel to Nordic country with a lot of snow and very cold? I am planning a trip to Iceland and Norway 😊

Only for the Boa color way, Anthracite is still available and IMO a very beautiful option. I've mentioned it a few times now, but Boa is the instant 'want' color IMO. Anthracite is more long term. I know considering stock, it's convenient for me to feel this way and say this but I've always reached for my boa bags but I've felt a change in the last couple of weeks and the black version is starting to steal my heart. It's a complicated relationship!

If you need a belt, we make a different line called Explore V2 that is built for loads that might require a belt.

Everyone is entitled to there own opinion and see where you are coming from, but the padding allows objects that might not be a perfect fit in the Core Unit(like a taller camera bodies hotshoe mount) to not put pressure into a persons back while contributing the packs overall fit and weight distribution. We do this in all of our current packs and it works well IMO.

I found answer about core unit's "not precompressed" walls in another comment. Ok, will see if they are quite the same. I didn't get your point about back wall thickness. There is one padded wall (with fine level of thickness on my opinion) in laptop pocket in my Explore v2. And only then back wall goes. I belive there was no sense to made it soooo thick. but ok, it is traveling/hiking backpack, it is fine to have a lot of back padding. I don't see reason to make that thick back wall in urban version. Or it just looks the same?

Thanks for commenting and sharing your insights! A tripod will cover one side regardless of your opinion of what is right or wrong side for a pocket. TP mounting is on both sides. Stay positive.

Hi, our Urban line wasn't designed with bird photography in mind. With that said most lens under 33cm long, should fit in the 30.