I tried printing a keyboard...

Рет қаралды 42,741

Күн бұрын

Today we will be printing our very own custom mechanical keyboard using a recently acquired 3D printer. No one man should have all this scuffed power.
Edited by Bachoo:
b@choo.to
Bakeneko65 Github: github.com/kka...
GMK Henessy: massdrop.7eer....
My Socials:
TikTok: / shoobstube
Twitter: / notshoobs
Twitch: / shoobstube
Instagram(I post updates here): / notshoobs
Shoobsland Discord Server: / discord
Affiliate Sponsors:
Loobedswitches:
Use Code: SHOOBS for 5% off and link: loobedswitches...
Cannon Keys:
Cannon Keys does not offer discounts, unfortunately, but you can use the link to help support the channel:
cannonkeys.com...
KBDfans:
KBDfans does not offer discounts, unfortunately, but you can use the link to help support the channel:
kbdfans.com/r?...
Kinetic Labs:
Kinetic Labs does not offer discounts, unfortunately, but you can use the link to help support the channel:
kineticlabs.st...
Elboard:
Use the link and code SHOOBS to get 5% off and to support the channel:
elboard.store?sca_ref=771398.hp2lLxRUe1
Banggood:
www.banggood.c...
Bolsa Supply:
Use the link and code SHOOBS to get 5% off and to support the channel:
bolsakeyboards...
Drop:
You can use the Drop affiliate link for ANY purchase to help me out: massdrop.7eer....
Ashkeebs:
Use code: SHOOBS AND the referral link for 5% off and to support the channel:
www.ashkeebs.c...
Dangkeebs:
Use code: SHOOBS AND the referral link for 5% off and to support the channel:
dangkeebs.com/...
Prevail Key Co:
Use code: SHOOBS or the referral link for 5% off and to support the channel:
Parallel:
Use code: shoobs7 for 7% off and to support the channel:
parallel.limited

Пікірлер: 203

@yeahboi9887 2 жыл бұрын

I love the way the Alt keys scrape off the case, adding a tactile feel and sound to it!

@ivoszbg589 2 жыл бұрын

nice board - this really shows how important the difference between materials is. You may want to look at filaments mashed with metals like brass or aluminum, you might be able to get a printed board that's pretty close to the alu bakeneko

@madmisobroth1361 2 жыл бұрын

Would it be possible to get a viable switch plate that way?

@ivoszbg589 2 жыл бұрын

@@madmisobroth1361 definitely, but there are a couple of thing to look for - some materials like pla deform under pressure over time; switch plates can also be a bit difficult to print so make sure to calibrate stuff well. Also the quality depends a lot on the 3d printer - don't expect super reliable results with printers like ender 3 (the qc is super random, the fact that it's popular doesn't mean it isn't outdated). Good CoreXY printers like vorons or even hypercubes can do the job perfectly fine.

@madmisobroth1361 2 жыл бұрын

@@ivoszbg589 do you have any budgety 3d printers that you can suggest? I want to buy one in a couple of weeks

@ivoszbg589 2 жыл бұрын

@@madmisobroth1361 the sunlu s8 is a pretty solid start. It's a cartesian with a 310x310 print bed. You can also get a bimetallic heat break to allow using filaments that require higher temp (the stock heat break's PTFE tube will start melting at around 250°C, bi metallic ones allow higher temps for not much cost). Later when you get more into the hobby (and save some cash) you can transform it into a voron switchwire (someone already designed the parts required for that transformation iirc). You can also instead get a clone prusa mk3 (which are pretty high quality printers, clones of it usually arent get far behind. the drawback is small-ish print bed, so you'd need to split the keyboard/plate into half and connect them with glue), tronxy x5sa (it's a big corexy, requires a bit of tightening and mods to get stable results) or a sidewinder x1/2 (300x300, right at the edge of the size you need for a 60%. Have heard pretty good stuff about its quality). Good luck and have fun!

@lezyne1234 2 жыл бұрын

Calibration is much more important than the 3D printer nowadays for hobbyists. Also, it's funny that the Sunlu is solid while the Ender is supposed to outdated when they're almost identical.

@keebyky5808 2 жыл бұрын

Shoobs you're wrong. You're really good at making scuffed youtube videos. Literally watch you more regularly than any show for months now.

@vexus1093 2 жыл бұрын

i didnt think the recovery build was gonna be this good, glad to have you back addict.

@therick0996 2 жыл бұрын

as a keyboard/3d printing addict, i'd kill to have a big boi printer. slicing boards in half and gluing them together just ain't the same

@patchcs 2 жыл бұрын

Was just thinking about doing exactly what you just did. 180x180mm gang lol

@natan6218 2 жыл бұрын

just join split gang your hands will thank you

@ako4693 2 жыл бұрын

how much do you think the amount of filament would cost?

@patchcs 2 жыл бұрын

@@ako4693filament isn't very expensive tbh. Pla is dirt cheap

@therick0996 2 жыл бұрын

@@ako4693 negligible

@S85B50Engine 2 жыл бұрын

Do a Dactyl next, would be hilarious to see you handwire a 3d printed board

@NehNehPwn 2 жыл бұрын

Having designed multiple boards through 3D printing, I have to say it is a great way of testing designs and getting some decent sounding boards along the way

@ako4693 2 жыл бұрын

if you have made the bakeneko through 3d printing, what files would i have to download and print / what should i do?

@wanabdulhadi1268 2 жыл бұрын

Quite amazed with the results. Using the body of the bakeneko as a reference was a good idea as the keyboard sounds great without having to rely on foam.

@NIIIICO 2 жыл бұрын

5:05 I can almost smell the Sharpie *through* my computer screen here.

@datjp 2 жыл бұрын

It surprisingly sounds not too bad! Definitely a difference in sound due to the difference in the materials used for printing it. Maybe try adding feet and possibly testing different types of filaments to get a specific desired sound. Other than that really, sounds surprisingly great!

@hyphen8d725 2 жыл бұрын

I would be really interested in seeing you build a Dactyl Manuform, because it takes custom parameters for your hand and generates a model.

@BokehhBob 2 жыл бұрын

You should try 3D printing a Boston, its open source now. Big boi board.

@twinklingwater 2 жыл бұрын

I'm not surprised that a printed keyboard sounds decent. I myself use a handwired split keyboard with a 3D printed case (the switches are stuck in a printed plate without a PCB). I use proper caps and lubed switches. It sounds and feels way better than anything I've used before and it certainly holds up with the stuff keyboard youtubers show off. So: it's only custom if you've printed the case yourself ;)

@andrwwz6351 2 жыл бұрын

Handwire club rise up! I've been using my own as my daily for nearly a year now too and I love it.

@aloi 2 жыл бұрын

I got a Bakeneko60 3D printed as well (SLA) and it turned out pretty good! Definitely sounds quite different from an alu case though

@radiotbo4646 2 жыл бұрын

were did you get the stl file?

@mrcelery 2 жыл бұрын

You know it’s gonna be scuffed when there’s „scuffed“ in the thumbnail

@makermadness6540 2 жыл бұрын

might be the camera lighting but that looks like a damn clean 3d print mate.

@sooup8465 2 жыл бұрын

you gotta make scuffed keycaps for the scuffed65

@DirtNatty 2 жыл бұрын

Some sanding and paint and this would have been a $500 board

@mrcelery 2 жыл бұрын

New Shoobs video = hype

@SuchtFaktorHoch10 2 жыл бұрын

Keycaps next with embossed letters.

@danktank2595 2 жыл бұрын

How did you get the whole board file? All I can find is the keyboard split into 3 pieces. Did you fuse them together in fusion or did you find a single and whole file?

@spyqui5505 2 жыл бұрын

Mans didn't go the whole way, could've printed the caps maybe even printed the switches partially

@Daniel-dj7fh 2 жыл бұрын

curious to know how 3d printed plates would sound, I'd maybe be interested in a 60% iso one if they're not too expensive

@Aiyawill8008 2 жыл бұрын

yes to more 3d printed stuff

@Acorniscute 2 жыл бұрын

0:55 i can totally agree

@blitz-kun005 2 жыл бұрын

0:53 I feel insulted xD

@Raiko01 2 жыл бұрын

Of course Scuffed is written in Comic Sans because why wouldnt it

@JMsolidsnake 2 жыл бұрын

I've been elbow deep in lost ark for so long when I finally left my room, my landlord had sold my apartment to someone else ;)

@andrewgrasman8951 2 жыл бұрын

Please more of this

@adamreynolds2234 2 жыл бұрын

comic sans to top it off, beautiful

@yacobo3848 2 жыл бұрын

5:51 surely someone else noticed the help in the bottom right corner

@ralphM1114 2 жыл бұрын

The 3D printed one sounds better than the alu

@HBangerHS 2 жыл бұрын

make a scuffed keycap set on the printer dude!

@blank-mq8ef 2 жыл бұрын

schoobs after seeing you try a butter stick itd be perfect if you try a redox now, since you got a printer and all

@calvinkeswiel3120 2 жыл бұрын

This video was so much fun to watch! You got yourself a new sub (and maybe member)

@Dark._ 2 жыл бұрын

This is scuffed at it its peak

@JordanDoesKeebs 2 жыл бұрын

Another Shoobs masterpiece

@Isaacthedank 2 жыл бұрын

Hey I recognize that high quality keeb content. Hello Mr gmk

@milky1011 2 жыл бұрын

ily shoobs

@nisekoishi Жыл бұрын

HOLY SHIT THAT THING SOUNDS LIKE A PLANK OF WOOD

@keebyky5808 2 жыл бұрын

That "oh shit" before the typing test i'm dead

@coveragecraft8639 2 жыл бұрын

love the steins gate deskpad

@malicedestroyer 2 жыл бұрын

i dare you to print the keycaps

@E10979 2 жыл бұрын

3D printed keycaps (make a scuffed keycap profile)

@nbshftr 2 жыл бұрын

please 3d print more keyboards

@GuardianNoodle 2 жыл бұрын

Thats actually pretty deep sounding i kinda like it

@kivylius 2 жыл бұрын

Dude that sounds thocky AF, way better the metal case, got to try this

@asianbabygirl3742 2 жыл бұрын

we need 3d printed swiches

@willtogs 2 жыл бұрын

the way it sounds better than the aluminum case (opinion)

@amizan8653 2 жыл бұрын

Oof, that's self burn at 1:20 just hurt

@aboringuy 2 жыл бұрын

like that one zach freedman video but scuffed

@killianireland8104 2 жыл бұрын

"As an Asian when I see big number discounts, I buy without thinking of the consequences" Lmao

@noparaftowa 2 жыл бұрын

Bro i smelled the sharpie through my screen

@yoyesnoble 2 жыл бұрын

Kurisu figure with shoobs head merch when?

@Oliver-tm9jk 2 жыл бұрын

i swear the way the keeb always sound good shoobs is a wizard

@EDINOZO2201 2 жыл бұрын

You could fill the "SCUFFED" printed part with black resin or something

@nosaj03 2 жыл бұрын

that board sounded better than most boards at higher costs

@qhosef377 2 жыл бұрын

shoobs, pls discuss the superiority of topre.

@annoto997 2 жыл бұрын

Daym. Makes me want to buy a 3D printer too and print some cases, hurrhurr.

@martinsim7551 2 жыл бұрын

3d printed artisan keycap!!!

@Zeldur 2 жыл бұрын

Ahhh, a noob to 3D printing and a printer I've never heard of. Honestly, for a first time FDM print, that's great! Yeah the bottom lifted like crazy but those are always annoying. The layer lines is about what I expect from my own printer but that's a piece of crap that I want dead. Ideas to print- Super weird "ergo" keyboards, a model of your avatar, your fav degenerate idol at max printer volume, tiny degenerate idols to slowly surround the frame of the video, the thiccest most artisen keyboard possible like a typewriter but bulkier... or make more and more bulky keyboards until it can't fit in the frame, a stupidly elaborate way of displaying currently unused switches.... thats all I can think of for now.

@shinjid3705 2 жыл бұрын

Now you can actually sand it put prima on and paint it with some metallic colors that would look sick.

@mogensfaust6002 2 жыл бұрын

Squashy did this but he printed more parts than just the case

@Faiq_h 2 жыл бұрын

aside from sanding I believe that you would of benefited from a deburring tool and sealing the keyboard case.

@gabrielshen3299 2 жыл бұрын

As a fellow asian about buying things with large numbers followed by "% off" I also buy it instantly without any question or thought

@featherless656 2 жыл бұрын

Idk know why, but when he types on the keyboards he makes, they all sound like they are slapping someone

@tituslim4996 2 жыл бұрын

gmk scuffed should be you next project

@myth_osaur 2 жыл бұрын

A board your cursed hands can’t smear??

@vortexxbtww 2 жыл бұрын

Is that ..... th-th-th-THOCK!?!?!?!?!?

@meteorhound1 2 жыл бұрын

Dactyl Manuform build incoming?

@keagan5379 2 жыл бұрын

ong gummy o ring is op

@stop.me.7395 2 жыл бұрын

"My spending habits are not a problem" NO, no, and no. I doubt u, and will faithfully do it till the end of time.

@chietopiaasmr 2 жыл бұрын

For a scuffed build, this sounds really good 🔥

@_disruption 2 жыл бұрын

Mx browns + this board + 5 dollar pbt keycaps = Maximum scuffness

@_disruption 2 жыл бұрын

The suffness is INSANE

@haw8638 2 жыл бұрын

How did you get the full case? There are only parts available. Please help

@progste 2 жыл бұрын

That is so scuffed...

@nikolakostic5667 2 жыл бұрын

That sounds sick! Tbh sounds better than the original one. Original is way too high pitched for my taste

@thekingsofthings766 2 жыл бұрын

As someone who has a 3D printer this hurt.

@habibikhader 2 жыл бұрын

Wow, that was really cool

@tomi9836 2 жыл бұрын

Use the printer to make the keycaps!!

@scufed 2 жыл бұрын

shoobs i think u should print sum friends

@eggychan7613 2 жыл бұрын

What is going on, shoobs here

@aerocreates 2 жыл бұрын

IC & GB when? I would genuinly pay for this.

@BEG_Bueno 2 жыл бұрын

revolutionizing the keyboard world one scuffed video at a time, Incredible!. More please.

@thatonedamnguy9524 2 жыл бұрын

Ayo when new deskpad?

@ThatDudeDeven 2 жыл бұрын

Is this spacebar flipped? I thought I have noticed it in a few other videos too.

@ayoayo4813 2 жыл бұрын

what mouse are u using, it looks like final mouse when blurred ngl

@Droopeakok 2 жыл бұрын

Now do one made out of silicone

@Cdustt 2 жыл бұрын

The font reminds me of a kbd67 lite lol

@HybRidChrome 2 жыл бұрын

ah fellow asian, yes big discount big eyes go woop

@Cactuspractice12 2 жыл бұрын

more scuffed 3d printed conte nt pls

@pyroyuy 2 жыл бұрын

Now print out keys and add it to this build

@acreation831 2 жыл бұрын

I asked my teacher about this once and he rejected immediately

@mmaaRkers 2 жыл бұрын

As a fellow asian, i am suprised how much money yoh spent on keebs

@ligmabaldrich485 2 жыл бұрын

Print some Dactyl Manuforms

@fluffyman9094 2 жыл бұрын

yo do you think there is a place where u can find a bunch of open-source cases? I want to print a bunch of cases but I don't know which ones I can find that is open source? If there is a list of the most common ones that would be helpful too.