Been shooting them for a few years now and they have done great with both Annihilator fixed and Sevr mechanicals grouped out to 100+yds. -Lifetime Warranty, that’s why price is a little higher -Use fletching or super glue during hunting season for pass throughs. -Lighter than most vane setups, which means little more speed and FOC. -They can be shifted forward or back for fine tuning. -Not the loudest but not the quietest either, comparable to Blazer -Very durable and even if deformed a little, put in hot water to return to shape. I recommend anyone and everyone at least give them a try and compare to current fletch setups. They will perform as well or better with majority of setups and are extremely convenient.

These shoot exactly like my Blazers. I have shot them out to 80 yards. Excellent. Taken several bucks with solid broad heads and the Zingers. No steering issues.

Little soap and set the end of fletches to your desired distance from nock. Been using for years. Great guys to do business with.

man awesome test and video my brother !!! less lethal paintball markers had my attention for a couple of years now , learned it , modded it and shot the hell out of them lol . i been taking a break from my other love ,archery !!!! started shooting at about 5 years old , use to take off my suction cups and sharpen my wooden arrows in a pencil sharpener lol . because i been a SHTF expert for a few decades now , i got into modding the air powered paintball markers heavily the past two years for less lethal , but in all reality , nothing beats the bow and arrow ,,,,,,,,,THEY ARE THE ORIGINAL AIR POWERED WEAPON LOL !!!!! again enjoyed the test of the zingers against normal arrows my brother !!! great product !!!

I used to use Bohning 1" or 3/4" back in the late 90's for IBO shoots. At unknown ranges they can be a game changer in eliminating est yardage mistakes.

All I use is the newer cool colors in 2in Bohning fletchs. They work great and fly great every time. Matched w Carbon express XRZ,and BLu-rz and reds.. I use a bitz, and love doing my own arrows .

I have used so may different vanes, mow i shoot the Q2i fusion xii vanes ay probably will never switch. Shrunk my 100 yards groups in the wind with mechanical broadheads. Super tough , 2 inches long low profile. Great review .

I'm interested in trying the 4 vane version of them. They actually just came out with a new, larger version as well. The ones you have are .75" long and .5" tall and the new ones are 1.25" long and .5" tall. I believe the Z series like you tested are about 15 grains each and the new bigger ones are about 22 grains each.

I use them with a whisker biscuit. They do slide a little after each shot with the biscuit but groups well and I’m happy with them.

Nce video. If your bow is tuned and your arrows are tuned with the fixed blade broadheads spinning true to the shafts, you could fly any vane, especially with a helical. I fly 4-blade Slick Tricks to 50 yards on my arrows fletched with Bohning Mini Blazers with a 2 deg right helical, and hit dead nuts where I'm aiming.

Most advance archers in Hawaii shoots 4mm anything from vaps , tkos, x-10s, Easton long ranges Easton advances .001 straightness .... .165 -3.2" or .166 -4.2" mm (skinny's) fly flatter because of its low profile. We usually fletch with low profile vanes anywhere between 1.5" to 2.25" Bohinings ,tacs , q2xl Aae etc Super accurate @ yds to 130+ aaaanndd a few fps gains ✈️🚀💨road 🏃‍♀️

I know what fletching i'm going to use for 3D this coming summer!! these look awesome. might add just a very small drop of glue just to tack it on though

Tried the Zingers a few years ago. They did fine until I put a broadhead on. They just didn’t quite have enough drag for my single bevel heads.

I run some but they're glued in. Work well! The only thing I've found is that they dropped off when getting a pass through (when you don't glue them).

Shows how little it takes to get great flight from a tuned bow/arrow setup. I assume there’s some vane offset like 2 degrees?

Dang that’s awesome. I would love to see how they are with fixed blade broadheads. But by the comments, there are some happy shooters using zingers.

You should get 4B outdoors on. He pretty much test Broadheads but has been a big fan of deer crossing arrows for sometime.

Been using for a few years! Will NEVER go back to glue and jigs for my hunting arrows!

Good shooting I can only shoot 40 yards max at my house

I would definitely like to see what happens with a pass through

Work great with fixed blade broadheads

Those things are pretty damn interesting. I don’t think I’d trust him with a broadhead but for target that’s pretty cool. I might buy a pack of them to pull around for an emergency.

Keep up the great content! Btw how would you compare the arrow flight past 70 yards between zingers and the regular? Any parachuting or wobble with the zingers?

Oh Bro, are you in San Diego? I used to shoot in this range so much!!

Maybe try two sets off set. Now I'm curious.

Have had better groupings with Aae pro max verses the Aae hunters and max stealth and that’s with fixed blades annihilators and max stingers and mechanical deadmeats. Good bow tune and proper spine arrows and golden.

Is that a sticker still on the bill of your hat or a light? Great review, i fletch arrows for looks. Those are very practical, easy, durable, and accurate. But ugly.......

What is the MM of your DCA hunter arrows

Did you say the name of the arrows were called deer crossing?

Think I'll just keep fletching my own, look cool though.

Why you not shootin the Core SR?

Zingers makes fletching arrows seem like a dumb thing to do. Especially with all these "in depth" vane testing videos floating around.

Those look like they are 3D printed

I think you have a deviated septum

🏹>>>>>>>>>🎯

Ever shot FOB’s ? Look them up !

I don’t think it’s anything I’d ever consider especially for hunting. I’d be concerned with them coming off when going through an animal and clogging up a hole.

Real feathers are fletchings synthetic is vanes.

They work great, until you pass thru a bale, then they are gondie inside the bale.

i wouldn't listen to thing this guy says