A refreshingly nice video with humor and excellent videography! Thank you. :)

Loved it - "instantly make my mistakes permanent" great 🤣🤣🤣

"i borrowed a scale from my neighbours meth lab" literally dying! i breathed in a mouthfull of pepsi xD

The bloopers at the end are just hilarious! Thanks for sharing!

It’s 9:40pm on Saturday night. I’m watching a guy weigh sawdust on KZfaq.

Gluing it to the saw was inspired. Thanks for the outtakes and the embedded humour and the final result. Great stuff.

LOL! "Instantly male all my mistakespermanent"!!! I enjoy your projects and your dry sense of humor.

Two Thumbs Up. One for the video solution and one for the out takes.

Most of my cuts are also at 90 degrees. The problem is when I get in a hurry, I sacrifice improvements I've made for the sake of time. That's the problem I have with most solutions like this... I'd get in a hurry and suddenly have to cut angles, and I'd right through it. But being able to remove it that quickly? PERFECT. You rock. I'm going to do this for my Hitachi... Probably with some modifications to both the box and the saw. Thanks. If only more social media was about exchanging ideas instead of exchanging scantily clad selfies. I view those people as extras in this movie we call life. Extras don't have enough talent to have an important part. They're not worth much. But if they weren't there taking up that space, it'd probably be weird.

3:50 “Using a square I can hold things at 90° and then I hit it with some activator to instantly make all my mistakes permanent” 5:30 “. . . and then proceeded to get glue all over my table saw” 6:18 “ . . . and then after several years of filing I was able to turn that circle into an oval“ Lol 😂

Dude, this is a great solution for 90 degrees! Well done!

Laughed many times. I have that saw and it is horrible with dust. I’ve watched a million of these as well as hacked up and made three ducted systems now. Only thing I can see that will increase your percentage more is to somehow make that hard turn into something softer. Like a rounded turn. Stumpy nubs found that those square surfaces kill efficiency and I think even on the scale of your box making it just a little more organic inside will yield even better results. I unfortunately work as a finish carpenter, flooring installer, gate/fencing carpenter, and just about whatever my wife can come up with on the weekends. Even though I have a dewalt compound (non slider) as my job site saw, I’m renovating both of the units of our duplex so my Bosch has now turned into my lungs’ worst enemy! Thanks for the vid and keep up the wit; I love it!

Video on dust collection. Proceeds to clean dust out of collectors with air hose - blowing dust all over the inside the shop. 😆 Loved the video!

While watching, I was like, "He's lucky he isn't gluing that box to the table of the mitre saw." And then came the out-takes! 😂

Love the out takes at the end, thought I was looking in a mirror!

Now one of my favorite KZfaq videos 😂

Woodworking, science, math, and humor!?! Great video, keep it up.

I came here for the woodworking, and I am staying for the jokes. Love your sense of humor. 👍😜

LOL - such a smooth presentation...Then there's that bit at the end that reminds me more of what I sound like during my least proud moments. Cool experiment. Thanks.

making me lmao like a baby after 76 years makes my woodworking go much much smoother, thanks for sharing

Man I've seen some huge dust collection cabinets that almost fully enclose the back half of the saw. Really only good for a permanent mount and a non portable saw. In any case, the difference in massive amounts of material and time would only serve to close that 4% gap in collection. Your little doodad takes the cake. Simple, cheap, removable, and it allows the saw to remain portable. Nicely finnessed solution buddy. Good on Ya!

Loved the last outtake. Watching you using the CA glue throughout this video I kept thinking "What skill this man has because I would have surely glued pieces to my saw doing it that way". Haha, I was right!!!!

Love the bloopers the end. Wish more people showed them.

"...and make my mistakes permanent." LOL. That's how I'm going to think of the can of activator from now on.

A woodworker with a sense of humour doing a scientific project. Well done mate. Now I know I'm not alone....

Just watched this video again. I have to say, my wife and I both really enjoy your sense of humor! It’s good to get reminded every so often that we need to keep things in perspective. For my part, I’m still trying to get organized, the workshop was too small, moved into the garage and it is currently overflowing with too much “stuff”, tools, stands, cabinets, benches, tables, etc. And of course, trying to get better dust collection, more wood storage, properly aligned tools that will cut square, or straight. I know, don’t blame the tool. But seriously, some tools are ridiculously difficult to align. And they refuse to stay aligned. Ah well, as the saying goes, it keeps me off the street corner. Perspective! We have to be able to laugh at ourselves. When we lose that, we’re in serious trouble. God bless, take of yourselves, stay safe!

I like your videos a lot. I know this is an old one. I almost gave up on your experiment until the very end when you found the ratio between the dust and whole wood segment. Science!

Cool project. I was having trouble concentrating because I was laughing so much at your jokes. Keep up the good work

Your videos, your craftsmanship, and your sense of humor are terrific!

As a retired mechanical tech, I love the weighing test. Best way to evaluate your different configurations.

I usually don’t worry too much about dust collection. Since I just purchased the same saw last week, I thought I would check out your vid. You had me laughing out loud. Especially with your outtakes. Too funny!

My friend, you have great talent for both woodworking and humor. Very gifted. Please consider writing as another Avenue to contribute, if you haven’t done so. The M&M analogy is a great one....Best to you

“I quickly hit it with some CA activator to instantly make my mistakes permanent.” LOL. Hilarious! Love it!

Thanks for the excellent explanation and the outtakes! They show you make the same dumb mistakes as the rest of us.

Outtakes were a riot! LOL

Few people will show the "goofs" along the way - Thanks. Excellent work and funny too.

Almost spit my drink everywhere when he said "borrowed it from my neighbor's Meth lab" lol!

I really enjoy the bloopers...we all make them, and they all sound the same! :)

I like the fact that this solution is small and very efficient.

I really enjoyed the outtakes at the end. I’m glad to know I’m not the only one who makes silly mistakes! Great video and dust collector. Thanks.

Love the outtakes. It’s like you’re channeling me.

Love the build, love the humor, love the outtakes. Perfect :)

I love watching "myself" at the end. Wow, I'm not the only one....... Thanks for the good video. I'll try mine tomorrow.

Came for the instructional video. Subscribed for the humor.

I love the out takes. It’s so “true to life!”

Great idea and solid outcome. Thank You for the videos and your commentary is awesome.

Great humor along with great craftsmanship.

Great vid excellent sense of humour You've won me Hope you humour levels are still high through the zombie apocalypse

Great vids. Love the outtakes. Glad to see others have some of my days

This is the best video about dust collection ever!

Best bit was whem you stuck the duct to the saw :o) Thanks for the entertainment.

I found this video through Jennie and Davis's shop tour video. This video alone is why I tossed you a subscription pal. I haven't seen any other content, YET! LOL, but I will!

OMG thanks for bloopers. As soon as I saw "glued it to the saw" I LOL pretty hard. Thanks for sharing your pain. As somebody who had been testing a lot of solutions, I'd love to see your take on bandsaw dust collection. They may be more unruly than miters.

I don't have a mitre saw, but I stayed for the outtakes... ;-) 🇬🇧

Sadly refreshing that other people are guilty of serious self ridicule when they make mistakes. Very good vid!

Love the out takes!

Absolutely - perfect combination of information and (really clever) entertaining dialog. Well done!

Your videos are always educational, enjoyable and entertaining. I can see myself in all of your "out takes!" Thanks for all you do for all of us!

Your commentary takes your video from educational to "OMG thank you I needed this laugh today!"

I appreciate the analysis and the humor. Thanks!

The outtakes are priceless. They sound like me when I don't pay attention. 😂

Honestly, I wasn't particularly excited about the topic, but your interesting and entertaining approach kept me watching to the very end. Great job - thanks for taking the time to make quality content.

*Bandsaws tension tip* : I have a small strip of card with "Tension!" Written on it, and a small magnet glued to the reverse. When I release the tension of the blade I pop this reminder on the blade; now I never forget to tension. When in use you can stick your reminder to the tensioner handle for safe keeping - HTH

Love the outtake mr. Human... 🤣

I love my bag. It lets me have the other 33% to stand on comfortably all day and as an atmospheric woodshop vignette it hides a lot more than my mistakes.

Nice job! Loved the bloopers - I totally would have glued it to my saw too!!

the out-takes killed me! 🤣🤣 (and your idea impressed me )

"Instantly make my mistakes permanent." That deserves a subscription. :D

Exactly my problem. Same saw, sam dust problem. Thx for the idea 👍🏻

"I instantly make all my mistakes permanent." I could not stop laughing 🤣😂

Love the dry humor!

Very enjoyably paced video with ideal commentary. (I just heard the neighbor's scale remark. That adds bonus points to your grade)

"instantly make all my mistakes permanent"... that and the Turretts episode at the end reveals a kindred spirit. New Sub!

I should've watch this just a bit earlier, cuz I sent my entire day making my stupid version of dust collect box which seems to not working at all. And I have to say that the mathmatical approach that you have done is by far the most impressive(persuasive) on woodworking video. Amazing job man.

I'm a big fan of science and woodworking.... nicely done. Love the humor you sprinkled in...lol

Your out takes give us all hope!

Great work, smart thinking. Best idea I've seen space wise, I like it forsure...

“I borrowed the scale from my neighbors meth lab”. I subbed 😂

Just came across this video, great solution without over-engineering the whole thing. Really enjoyed using compressed air to blow dust all over the shop to get ready for testing dust collection ideas. Whoever said irony was dead?!

Very good results and quite enlightening. Suggestion for remedy the first outtake: tie a knot in the end of your power cord then put the knot/loop over the quick-release for the tension. When you go to plug the saw in, tension the blade take the cord off the lever, plug it in and get to work. When done unplug it, put the knot/loop on the tension lever, release the tension and get a beverage to celebrate such a clever idea ;)

I finally made this! I didn't go any tests beforehand but I don't think my default dust bag is anywhere close to 77% efficiency. It's really awful. The shroud seems to control at least 80%, and there are some small gaps I need to fill that I'm sure will make it even better. Overall EXTREMELY happy how this has turned out.

I just upgraded to the same model Bosch a few months ago. Love it and I might try your dust boot to see if I can screw it up more than I have with my failed attempts at different ones.👍🏼

Brilliant solution. One bit of advice, don't be so hard on yourself when you make mistakes, you're obviously rather intelligent.

Friggin love your videos!! If you were my neighbor, we would have a blast designing/engineering stuff, and things, and what not whilst drinking the nectar of the beer gods!!!

I love your videos, you are naturally funny but approach things in a sensible way, the actual objective method used is really good especially as you finish with a percentage value of the actual timber removed by the cut. The out takes are brilliant and we will all recognise ourselves in them!

The narration of you videos are just as enjoyable as the video itself, they have a Winnie the Pooh feel to them. Haha. Keep up the great work!!

Love the outtakes. "I think I just glued it to the saw..." priceless.

I am so glad I am not the only one that talks to myself but also calls himself self an idiot!!, and to see someone else band saw blade come off.... Perfect :)

Your outtakes sound like they were recorded in my shop!

I have the exact same saw and this collection issue has been driving me insane for years. I now have a solution! Thank you so much for allowing us to pick your brain, subbed for more videos about your neighbors meth lab!

Even better. Your solution pollutes your surroundings with that 4% loss, the duct tape pimped stock solution is the next best and looses 8%. You reduced your air dirt by 50 percent, or 66 if compared to the plain stock version. That does not need some adding up over time. it improves the situation instantly. Thanks for the nicely made production.

Anyone smart enough to post their outtakes gets a subscription. Nicely done.

You nerded out on this video. I watched the whole thing.

This guys commentary is hilarious! I have this saw I think I will make one of these too 😀

That is the simplest collection on a miter saw I have ever seen. Good job.

Great build, great vid. Love the humour too…. “Neighbour’s meth lab” 😂😂😂

I can't do the stuff that you do but it is always interesting and cool to watch!

thank you for this. Mine has to be the dustiest tool in my garage

You have one of the most relaxing voices on KZfaq. Love your videos! Keep up the good work

Came for the idea, stayed for the humor :D