Short Cut! Replace Rear Ignition Coil On Toyota Highlander Camry Lexus 3.0 V6

Рет қаралды 193,405

Күн бұрын

Buy a shirt and support the channel! (Links Below)
In This Video, Josh shows you how to remove and replace the rear coil on a 2003 Toyota Highlander without wasting time removing the intake manifold which most mechanics would charge you to do! It's a simple shortcut that will save you time and money!
Vehicles with same engine:
Toyota Highlander 2004-2007
Toyota Camry Solara (V6) 2004-2008
Toyota Sienna 2004-2006
Toyota Camry (XV30) SEV6 2005-2006
Toyota Highlander 2005-2010
Lexus RX330 2004-2006
Lexus RX400h 2005-2009
Lexus ES 330 2004-2006
Mitsuoka Orochi 2006-2014
Tools needed:
-Socket set
-Spark plug socket
-Long regular screwdriver
-Short Phillips screwdriver
-Magnet
Thank you for watching! If you have a moment please subscribe to our channel so we can keep helping budget mechanics all over the world!
Merch:
BM Channel T-shirt - www.amazon.com/dp/B08F3FF8Z7
BM Channel Sweatshirt - www.amazon.com/dp/B08F3FTK7H
Budget Mechanic T-shirt - www.amazon.com/dp/B08F3G8F4J
Budget Mechanic Sweatshirt - www.amazon.com/dp/B08F3FNV7T
Budget Mechanic Long-sleeve Shirt - www.amazon.com/dp/B08F3F4JKQ

Пікірлер: 287

@luissarti4227 Жыл бұрын

I’m not a mechanic by any means. I’m a marketing director. This is the best video on KZfaq for doing this job. I was able to replace the all spark plugs and coils without removing the intake. Thanks so much for making this video. Excellent!

@bikersoncall Жыл бұрын

I have a 2001 RX300, I would guess this works for mine as well, either way, I think you just answered my question of whether his will only give access to the center rear coil/plug array..

@davesmith4957 4 жыл бұрын

Excellent camera work in those tight spaces, really drives the point home, thanks!

@larryliang2173 3 ай бұрын

I am just in the middle of removing the intake following other videos and could not remove the nut off on the back against the wall, then I came across your video! This is truly amazing and I am going to try to change spark plugs without removing it. Mine is 2002 highlander.

@BudgetMechanicHawaii 3 ай бұрын

Glad it helped 🤙🏽

@mikejohnson7528 4 жыл бұрын

I have a 2000 rx300 (same engine) and have changed the rear coils several times. Using both the "remove the whole top of the engine" method at least twice and the method Josh demonstrated. This is the best video I've seen on how to replace the rear coils without taking off the air intake manifold. This method is well worth a tire. if it works for you it will save you about 6 hours of work. Thanks Josh - great video.

@johnschuler3269 2 жыл бұрын

Fine Job, Josh. THANKS! Saved me a TON of $$$ ON MY 2003 LEXUS RX300 ... did 120K "Tune Up" a bit early @ 113K. Dealer wanted $1,100 for the tune up ... PLUS $1,134 to replace all 6 plugs ... Yes! $189 EACH PLUG (and all 6 or nothing) at the same time. I did it myself for ~ $600 in OEM parts & materials! I paid $50 ea delivered for NGK plugs made in Japan and spec'd for Lexus.(also dropped the Xmission Pan (Cleaned, New Filter, Amsoil) ! YOUR Video ... gave me the courage to do it ALL. I am NOT a mechanic, but rather a former radio/radar field engineer who can "sort of" fix, adjust, test, re-design/improve things ... though always Slowly and Carefully. And I love to "Cheat and Learn" here at U-Tube University! Best to all, John in the NW

@QNY96 4 жыл бұрын

You can also use the coil pack to remove the spark plug after you loosen it

@loden888 2 жыл бұрын

Or a 8" length of 1/4" ID clear tubing

@Rsteel105 4 жыл бұрын

Thanks for this video. Straight to the point no distracting music or stupid comedy jokes. Really appreciated!

@godfirst6880 3 жыл бұрын

Wow... Incredible time saving video! I was gonna take off everything until I saw this! Saved me time to do my timing belt. Thank you Lord for sending this man to show us how to save time and money!

@precioust100 4 жыл бұрын

I just did this on my Lexus ES330 didn’t want to spend $250 for someone to replace just 1 coil and I came across this video. My car had a cylinder 1 misfire and mines used the 10mm tool as well. Thank you so much 😊 it was so easy a girl did it thanks to you.

@edwardjdm 4 жыл бұрын

I tried this method on my 04 Sienna and it was a pain in the rear but it worked. It took me about 2 hours to replace the entire rear plugs. Now, if you're 5 ft 7 and short forearms, you're gonna need a stool. It was embarrassing because I had to it outside my apartment parking spot. Thanks Toyota!!!

@Zakaveli_23 3 жыл бұрын

😆😂😂😂

@michaelmarchand7653 3 жыл бұрын

Did you have to remove the plastic shield between the hood and windshield? Thanks!

@javiergrant70 2 жыл бұрын

“5’7”…need a stool” 😆😆😆 Thanks for the tip! I’ve added it to my list of tools to use. 😁

@the80h 2 жыл бұрын

only 2 hours is amazing imo compared to removing the whole intake. ty

@vettriley675 Жыл бұрын

5’ 1 “

@jimmlord9256 Жыл бұрын

Just changed out a #3 coil in

@joetousignant9130 2 жыл бұрын

It is possible to do this on 3.3L 3MZ-FE engine in a 2005 Highlander, as well. Difficult, but possible! I had to replace the valve cover gaskets a year ago and thus removed the intake plenum and did the plugs then. Little did I know that those DENSO plugs sold on eBay are COUNTERFEIT. The center electrodes were mostly eroded away in 15K miles. I had misfire cyclinder 3. car went into limp mode and was missing. I had to tow it home. I got new Toyota boxed Denso plugs from the Toyota dealer and got them in. Now the highlander is running good again. Don't make the same mistake I did.

@rakeshkaw5939 4 жыл бұрын

Wish I had seen your video earlier. I just replaced 5 of the 6 spark plugs on my 04 sienna. I didn't want to remove the air intake and wiper cowl etc that most of the other uploaded videos show. Although I couldn't get to the one underneath the plenum I was able to get the ones on either side of it. Wish I had your brilliant idea at the time I was doing this. But now that I have seen how you did it, I am going to replace the last remaining one too. Thank you so much for uploading and sharing !!!

@twootters7433 4 жыл бұрын

I CANNOT THANK YOU ENOUGH FOR THIS!!!!!!!!!! Yours is the best video on how to do this. Although I have a 2001 Lexus RX300 my understanding is they are pretty much the same vehicle. In fact my my#3 is in the same place and unless I'm wrong you removed the #4 as an example. My # 3 and 4 are misfiring. Of course #3 is the one you just did! I'm gonna replace all 6 plugs and all 6 coils. My shop wants $1000 for parts and labor. $400 for parts and the rest labor. My cost for parts was around $200 total and I'm assuming a day under the sun with the tunes on and a couple of sodas...lol Again, thank you so much for this video. Only problem I see for me is I'm a bit short with shorter arms. I might need a small stool.

@sukhkawal 4 жыл бұрын

Did you buy both plugs and coils for $200. If so, mind telling us where you purchased them and what brand? thanks

@Kp-tz9gp 4 жыл бұрын

sukh kawal I bought dense for my Toyota off of Amazon

@kreayeager8786 4 жыл бұрын

OMG TY!!! I just stumbled upon your video while looking for spark plug changing videos and THANK GOD I DID!!! You are a life savor.

@dannikolic2494 5 жыл бұрын

Excellent video. Replaced my #3 coil and spark plug last night. Used a very handy item. Gear Wrench 5/8 x 6. Spark plug wrench. Got it at Advanced Auto parts. 80546 part number. $10.99. Has a magnet to hold the spark plug. Once again thanks for the video. 2001 Lexus RX 300.

@sendit9214 2 жыл бұрын

That number 5 is hard it took way longer than this short youtube video but I got it done just by feel. One of the harder parts is just fitting your hand in there and being able to turn it

@Dailyfiver Жыл бұрын

Absolute life saver. I did 4 out of 6 plugs yesterday by myself thinking it was like any other car I had. Nope! Thanks for the tip! I’ll finish the last two today 😁

@goldhandlc1494 3 жыл бұрын

Thank you for video. I just changed all 6 of them, took me almost 3 hours but there is good feeling that I was able to do it myself and saved a lot of money. The trick was to combine sockets and some reducers to have the right length

@bromporke 2 жыл бұрын

were you able to get all 3 in the back out without taking the intake off?

@SHAD0WxF1R3 3 жыл бұрын

THANK YOU! I replaced my highlanders fuel filter, as it was running rough (turns out it was the oem one from 02, 170k later) and now, my engine is running extremely rich. I had the spark plugs replaced at my mechanics, but now, I can do the coils myself!

@smyrnatennese2711 2 жыл бұрын

Perfect Video for a very smart work! I changed three front spark plugs a couple years ago. Now I may follow your video to change three rear spark plugs. Thanks a lot.

@savkp9658 4 жыл бұрын

Thanks for the video you gave me hope and endurance to continue, by showing it is possible to changes the hardest ignition coil (3) without removing the plenum! , when I was giving up on replacing it my-self on Lexus es330. It is job of patience! and squeezing hands in tight places.

@JoseGonzalez-kc8co 4 жыл бұрын

thank for the video, that is the real mechanic. bless you brother!

@flyingfish2 5 жыл бұрын

Awesome, definitely super helpful trick I've seen in awhile. great tip thanks.

@Lieto55 4 жыл бұрын

The moment you lifted that coil pack out I just laughed out loud. Funny reaction, but I did it the hard way (taking the plenum etc off) and I wouldn't have believed you could go directly like that, without taking the wiper mechanism etc., off. True, I have a2011 edition so it may differ, but it's definitely worth a try. Never would have thought you could do it. Your process for removing and replacing the spark plug is exactly the one I resolved to as well. Great minds...Thanks a ton for showing us the magic trick.

@gscott6907 4 жыл бұрын

You sir are my hero. Liked and subscribed! Thank you so much that's genius!!

@gmac1762 Жыл бұрын

Awesome video my friend!! No unnecessary BS chatter & straight to the point!! And no annoying garbage background music playing lol! Excellent job!! Keep up the good work!!

@javiergrant70 2 жыл бұрын

This gives me hopes. I have a 2010 RX350, and when I saw the video doing it by removing it intake manifold, I almost cried! 😆😆 Great video!👍🏾

@le_ona_79 2 жыл бұрын

Front three coils done 👌🏼 needed to get to the back... thanks for the awesome video who would've thought you could bypass removing the intake to get to the rear three, especially the centre one, looks tight but can be done 🙏

@ericx2507 Жыл бұрын

This helped, I never attempted it because I have big old ham arms and hands, but once I leaned into the engine and got into the meat of the muthah I was surprised how easy it was the get into. I didn’t even have to remove that vacuum thing, just popped up the Pcv valve and pulled the hose up out of the way. Thanks for doing this!

@donaldpedigo296 4 жыл бұрын

... GREAT DEMONSTRATION VIDEO ... YOU HAVE A LOT OF PATIENCE AND DETERMINATION ...

@thanhpham-lq4vo 2 жыл бұрын

Thanks a lot Josh, You are an excellent mechanic and had a good video camera. I have a Highlander 02, V6. I just bought 6 set of ignition coils OEM from EBAY ( The coils are exact the same and identical of my original one that I removed) and 6 DENSO spark plugs. I followed your instruction and it took me about 3 hours to complete replaced the coils and spark plug # 1, 3, and 5. To remove the coil #1, I have to remove the 2 ground wires on the left that gave me more room for my left hand side. The coil #1, I have to pull out to the right side. I tried to pull out to the left but it is stuck. Removing coil #3 is much easier than remove coil #1. Coil #5 is also easy to remove. To open the coil connectors, I built a small C clamp bar. I drill a hold on top of the bar, use a tap to make a thread and install a stud. This stud will tie the center of connector coil so you don’t need to press the connector coil. Then you can remove the connector of ignition coil much easier.

@BudgetMechanicHawaii 2 жыл бұрын

Whoa great job!

@aros007z 5 жыл бұрын

Great video, thanks I almost removed my plenum!

@JournyOfaPeacefulRuller 5 жыл бұрын

Dude that was an excellent diy save money tips. Two thumbs up!

@twootters7433 4 жыл бұрын

I'll add my two and we'll give him 4 thumbs up!..lol

@pirihern9329 2 жыл бұрын

Muy bueno

@richardhaen 3 жыл бұрын

VERY GOOD VIDEO, U SHOWED ME A NEW WAY TO CHANGE the back coil and plug the ezway . Thanks

@msanabia01 4 жыл бұрын

Thanks a lot Josh, video was really helpful.

@jessicawhite1598 7 ай бұрын

I’m with all the other comments I see, you did an amazing job with the camera and saving time with this job! I get overwhelmed watching videos of people taking so much apart to get to them!

@BudgetMechanicHawaii 7 ай бұрын

You can do it!

@Jlippo 3 жыл бұрын

Great video, all the others explain how to take the intake but this is really something GREAT...!!!

@robertroberts9782 4 жыл бұрын

You my friend are a wizard

@musaquazi3495 7 ай бұрын

I am speechless about the details that went into making this video with magnificent clarity. Thank you.

@BudgetMechanicHawaii 6 ай бұрын

Thank you 🤙🏽 Glad you liked it!

@ChinaChuck 8 ай бұрын

I'm glad for all of the advice. I got the PH3 screw out the he pointed out, but the PH2 stepped the head. Working on getting that out before I can get to the back 3 ignition coils.

@BudgetMechanicHawaii 7 ай бұрын

Ouch!

@michaelespinoza3828 Жыл бұрын

I just did this for cylinder 1. It worked so thanks. I did have to loosen 1 vacuum hose and 1 set of ground wires and the black brace that’s bolted on the strut mounts, in order to get the ignition coil out, but the general idea worked, thanks.

@saleenpollo2 4 жыл бұрын

Thank you it worked for my 02 Highlander

@cartoonsbyjohn 2 жыл бұрын

Very helpful. Especially how to release the very difficult tab connection in the difficult back access on the engine. Similar to my 99 Lexus ES 300.

@lvpcreative2330 4 жыл бұрын

Wow! Thank you very much for this!🙏😁

@zacmartin164 3 жыл бұрын

Want to thank you very much. Saved me who knows how much $. Busted knuckles and sore legs but happy and satisfied.

@dansklrvids7303 Жыл бұрын

Incredible camera work in a tight space, good job

@scorpion196970 11 ай бұрын

Thanks a lot, i was almost ready to remove the whole thing apart..Awesome!!👍

@nebegama1 5 жыл бұрын

Great job. Wonderful explanation. I’m thinking about changing six spark plugs on my 2004 Lexus RX330 and I was a little skeptical if could do the job my self cuz every tutorial I saw shows the job by removing the intake and as I’m just a enthusiast of mechanic not a professional but now I’m thinking I can do it without all extra effort. Thank you.

@TezEV 2 жыл бұрын

Did you end up doing it yourself? If so, How'd it go?

@godsson8035 2 жыл бұрын

I have rx330 and this doesn’t work, the 330 is more complicated, @Benji I wanted to ask him the same question

@TezEV 2 жыл бұрын

@@godsson8035 well shit

@TheTomG100 3 жыл бұрын

Pretty slick, thanks so much for posting !

@shintso57 Жыл бұрын

Appreciate very much! Saved tons of time, indeed. Make sure to get genuine parts, not compromise with knockoffs from the online.

@StevenRgonzales 4 жыл бұрын

Great video gonna do the this Sunday thanks

@ashleymedina659 4 жыл бұрын

dude this saved me thank you !!

@jrain2097 Жыл бұрын

Came up with an additional method that might help some people. Spent legit two hours and could not loosen the connector off while pushing the tab all the way down the way he does it, just couldn't get the screwdriver to get leverage to pry the connector off the coil head. So, I found I could place a standard pliers around the tab to push it down with my left hand working thru a different hole (near the firewall) and then use a small screwdriver (about quarter inch wide head) and actually slightly pry up the opposite end of the lever of the push tab, to pry that up and over the hub it hugs, then used that smaller screwdriver to push the connector off the ignition coil head. My 2001 highlander is so rusted that I couldn't get the AC thing off on the left though I felt like that might not have even helped me to get his screwdriver trick to work. Still an amazing vid.

@newbernbears 3 жыл бұрын

The impossible now seems possible. Excellent job.

@azariusshaw1890 5 жыл бұрын

Thanks so much for this video! Its hard to find specific videos. I have a 2001 Lexus RX300 with 270,000 miles (with brand-new transmission) and it has the same engine in it. I changed the spark plugs and coils this week on all cylinders but cylinder 3 because I couldnt reach it and I was too nervous to take anything apart because I didn't want to struggle trying to remember where everything goes, but this video is PURE GOLD man! Thank you so so much! This makes everything so much easier! You definitely got a like and subscribe from me! Like honestly man you just saved me hundreds of dollars. -Not all hero's wear capes! Lol

@BudgetMechanicHawaii 5 жыл бұрын

Azarius Shaw I’m glad it helped!

@Jamsk8s7 4 жыл бұрын

Really nice information. I have a rx 300 and was able to do all 3 without moving and hoses or assemblies.

@Jamsk8s7 4 жыл бұрын

make sure not to pull the wires but pull from the plug.

@allenstallion7656 Жыл бұрын

Nice job ! You made it look so easy , thanks

@andreducai1793 2 ай бұрын

Thanks Josh , I am dreading and procrastinating the job , but it needs to be done . You gave me a new motivation . Mine is Toyota Estima with the same motor , even less space than on Lexus . I will give it a go .

@Matt-kn3fd Жыл бұрын

Thank you I'm gonna try it this way today, going to get the plug now.

@InexplicableBill 3 жыл бұрын

Holy hack! That was awesome man. I couldn't have done this when I did my '08 Highlander plugs. Even after doing the wiper cowl teardown, it was still a b*tch job. Props to your camera assistant. :)

@walter.bellini 3 жыл бұрын

Really great job, good video, good audio good editing, tons of time saved! Could you do all three in the back like this? I don't have this car but just curious Thank you

@wadepotter5377 3 жыл бұрын

Thanks bro! this is a huge tip

@telegoose9905 4 жыл бұрын

Wow compared to the other video from some weird talking guy, who makes you feel like you have to rebuild the whole engine. This was awesome! You got my subscription just because you use common sense!

@robertreikes4826 2 жыл бұрын

GREAT video but I found that removing the coil plug was the tough part UNTIL I used a snub (shorty) blade screwdriver from the RIGHT while pressing the tab with my LEFT (twisting the blade while pressing) and...............GOT IT!! Thanks again! Bob

@Qro_Cali_0184 2 жыл бұрын

👍🏻Exelent video bro,thanks for sharing 👍🏻

@jonathanhochmuth4319 2 жыл бұрын

Wow.... what an incredible quality vehicle

@PCMKR-xe2vx 4 жыл бұрын

Thanks for for video!! I hope you have time to help me with making another video in the future using 2007 Toyota Highlander V6 which has slightly different housing. Thanks again.

@admiralking 2 жыл бұрын

Absolutely brilliant video!!! Amazing camera work in that tight space behind the manifold. How did you do that??? Thank you for your efforts.

@jamesgreen3901 4 жыл бұрын

That is so Awesome! Thanks for this great tip. Liked and subscribed, Thank you thank you thank you. :)

@hellspawn8572 3 жыл бұрын

I recommend just removing the plenum, I tried to remove the spark plugs as in the video but was taking way too long. I spent about 2 hours trying to remove the ignition coils. Only took me about 8 minutes to remove the plenum. After that it was smooth sailing

@hillsane9262 3 жыл бұрын

How long did it take to remove the plenum? Is not the things that's supposed to take a long time and auto shops say is the reason to replace all coils and plugs at the same time because it's a pain?

@hellspawn8572 3 жыл бұрын

@@hillsane9262 With the correct sockets and hex key its simple. Took me about 25-30 mins to disassemble and remove old plugs and reassemble.

@hillsane9262 3 жыл бұрын

@@hellspawn8572 Thanks! That does not sound as bad as most say. When they over an hour, just for the plenum, may be that includes putting it back on, but you changed out the coils and plugs too.

@johnwest4097 8 ай бұрын

Great video! This is a huge help. Do NOT want to take the intake manifold off.

@BudgetMechanicHawaii 8 ай бұрын

Riiight?

@jjjohn5914 4 жыл бұрын

Fantastic. Thank you.

@pirihern9329 2 жыл бұрын

Great video. Doing sister's 2004 Toyota camry xle v6. Same setup. This was very helpful.

@BudgetMechanicHawaii 2 жыл бұрын

Glad it could help! Gotta take care of the family 🤙🏽

@anthonywhite9212 7 ай бұрын

Thank God for KZfaq. Awesome video man

@BudgetMechanicHawaii 6 ай бұрын

Boo ya!

@fredroybal6932 5 жыл бұрын

Thanks for doing this video. I followed your procedure on my 2002 RX300. This saved me a lot of time. Awesome shortcut.

@lilj882 5 жыл бұрын

I was wondering if ur worked for the rx300 ..I have a 2000 rx300 with this problem

@fredroybal6932 5 жыл бұрын

@@lilj882 this worked on my 2002 Rx300 so it would work on your 2000

@gemanscombe4985 3 жыл бұрын

To remove the loosened old plug (loosen until a few threads are holding) and install the new one, use an old spark plug wire boot fitted to a short 3/8" extension/screwdriver/tubular object. Short, straight piece of hose also works but boot is better. Save it; you'll use it many times. Magnet is for the skilled and brave.

@GearGuy 2 жыл бұрын

Wow! That is amazing! I might have to give this a try… But I’m not sure if my hands are going to fit, LOL!

@66lwmorgan 5 жыл бұрын

I have a 2006 lexus is250 V6 and it's giving a code PO305, Cylinder 5 misfire. Is this easy to get to? Thank you for the tutorial.

@theevangelist3174 3 жыл бұрын

Wow ! You are the man , l need to try that technique. 😍

@samuelcarstens6152 Жыл бұрын

Generally followed every step you suggested except left the plenum but did remove the large [vacuum?] hose from the head just behind the plenum

@jjjohn5914 3 жыл бұрын

Great job!!! I wonder if it the same for my 2001 highlander???

@clsunlimited 4 жыл бұрын

Awesome presentation!!!

@hawaiiknifeandgear5531 4 жыл бұрын

Thanks man, this was awesome. I'm working on my bosses Highlander and I was looking at what it was going to take to remove that upper intake. It looked like there might be enough room to wiggle them out , and I always try and remove as few things as possible when I'm working on cars, so I absolutely appreciate your video for the reassurance I needed. And you were completely correct about all of the vacuum lines and plastic pieces under there being brittle from the Heat, I did break one of the vacuum connections barely touching it. thanks again, definitely subscribing

@rockiemountin7535 4 жыл бұрын

Wow nice job, I’m still dreading this job but you made that look easy,and I know it was not

@BudgetMechanicHawaii 4 жыл бұрын

No, not easy! But certainly easier than removing the plenum! You can do it!!

@Kaiju-Goji 7 ай бұрын

Just picked up a Kluger (im in Australia) and i need to do this so thanks good job

@BudgetMechanicHawaii 7 ай бұрын

🤙🏽

@GearGuy 2 жыл бұрын

Great video, Unfortunately this does not work on a 2003 Toyota Highlander…at least not with my hands. There is simply not enough room on the left side (even after following the video) to get my hand behind the Intake Manifold. I was just barely able to remove the far left sparkplug (#5) and replace it. Even then I was hard pressed to get enough clearance to fit an extender or any combo thereof into the chamber. I certainly don’t have enough room for cylinders #1 and #3. It’s really too bad Toyota made something as common as spark plug replacement so difficult. My only option now is more teardown to get room for hands and tools or just bite the bullet and take off the Intake Manifold.

@greasyhitchball 4 жыл бұрын

Brilliant!!

@toaluasaleupolu7060 4 жыл бұрын

Subs today thank you for the nice video 👍😁

@georgelee6857 10 ай бұрын

Excellent tip

@georgelam-yoyo4281 3 жыл бұрын

I m about to do my sister 04 Sienna and hope this method would work for me.. cuz I ve seen others video that u have to take all that intake... with too much work. Thanks for the video

@user-uq4ly6fp6m 2 жыл бұрын

did this video help at all? we got a code P0353 for ignition coil C and are planning on doing this soon.

@samtx5518 Жыл бұрын

Outstanding!👏👏

@felixestrada1324 3 жыл бұрын

Excellent great job end video ,👍

@richardhaen 2 жыл бұрын

Very good video, I am going to have to change my number 6 coil going to c if it is as easy as u showed. Thanks oh is number 6 to the back side left or right?

@nikkig5153 2 жыл бұрын

This is awesome!! Replacing #2 coil, but this was so informative. Keeping it for future reference. Great video. Great explanation, thorough, easy to understand. Great photography. 👍🏻 What state are you in? So hard to find a good mechanic! Lol

@rakesh-ev7br 7 ай бұрын

How are the cylinders numbered - is #2 in the front or the back?

@scottwatkins39 3 жыл бұрын

Certainly appreciate.TWO QUESTIONS i have 06 lexus 330. will this method work for my car for the rear cylinders? How long approximately did it take you?

@nyclc3886 5 жыл бұрын

Would it be the same method to change the other 2? Could you provide a size for your tools? Thank you.

@thedreadedgman 3 жыл бұрын

the Philips screws holding the vacuum actuator were #3, the accelerator cable bracket was 12mm bolt, the coil bolts are 10mm, the spark plug is 5/8" standard spark plug socket... the extension he used looked like a 3 or 4 inch, plus that little adapter (long enough to reach the top of the spark plug tube, the hex (allen) bolts on the engine cover i think are a 6mm if I remember

@nedoscarsandfishingvideos5500 3 жыл бұрын

Great video

@loden888 Жыл бұрын

A rubber hose also works when removing or installing the plug. Just stick the top of the plug into the hose and you don't need to worry about it dropping into the spark plug hole.