Should I SOAK my TRIMMER LINE in water? WE Called STIHL to find out!

Рет қаралды 190,189

Күн бұрын

To soak or not to soak? We came across this lawn care debate after tons of comments on our KZfaq channel mentioned it. So we had to find out. Naturally, we called STIHL!
Tune in to watch Chip get on a call with STIHL to end this hot landscaping debate for once and all. Should you soak your string trimmer line in water?
Enjoy.
----------------------------------------------------------------------------------------------
[PRODUCTS DISCUSSED IN THE VIDEO]
(1) Stihl Commercial X Line Trimmer Line 2.4mm / .095" Spool
You can browse this product on our online store, here: www.mainstreetmower.com/produ...
----------------------------------------------------------------------------------------------
[RELATED VIDEOS]
String Trimmer Heads - Everything you Need To Know! Decoding Myths: • String Trimmer Heads -...
What EXACTLY happens to your TRIMMER with GUARD OFF - Science Experiment!: • We ran a String TRIMME...
Gas vs Battery String Trimmers | Is 1 Battery really equal to 1 tank of gas?: • Gas vs Battery String ...
Best Trimmers, Lines & Blades [Playlist]: • Best Trimmers, Lines &...
------------------------------------------------------------------------------------------
[ VIDEO CHAPTERS ]
00:00 Video Introduction
00:37 THE CALL
02:56 Conclusion
.
.
.
.
Shop online from our extensive online product inventory: www.mainstreetmower.com/
Show your love; follow us on Facebook: / mainstreetmower
Stay updated about our shop , through our Instagram handle: / mainstreetmower_fl

Пікірлер: 212

@marklar7551 11 ай бұрын

Seems like yes from brand new it would be a good idea (sitting around for who knows how long) and maybe if it has sat around in the garage or shed for a while. Makes a lot of sense for pros that have it sitting on the thuck (maybe just for an hour in water since you load more).

@donaltschwager361 10 ай бұрын

😢

@guyh.4553 20 күн бұрын

No. He said that you only put it in water when the line is dry and a little bit brittle.

@rhettabney2838 9 күн бұрын

Rhett

@joeshields8974 Ай бұрын

The trimmer line is made out of nylon which is hygroscopic and in order to process nylon (extrude it) the material must have the moisture dried out of it pre-process. Then in order to make the nylon less brittle, the moisture should be re-introduced into the line/part that has been molded/extruded. With nylon being hygroscopic, it will absorb the moisture like a dessicant. I have worked in plastic injection molding for 30 years.

@davidszakacs6888 Ай бұрын

Back when I was working at GM, I had a job that involved pushing a plastic nut into a hole in the firewall, using an installation tool that was basically a long steel rod with a rubber knob on the end. The nut was for screws that secured the shifter cables as they passed through the firewall. The nuts became extremely difficult to install after a while, actually giving me a “ tennis elbow”. They tried heating the nuts with a heat lamp but it didn’t work. Then one of the engineers called to supplier and they told him the nuts required some watering from time to time. I always wondered why they came wrapped in a plastic bag inside a cardboard box! So whenever a new box of 10,000 nuts came in I dumped a cup of water in the bag. Problem solved!

@mainstreetmower Ай бұрын

That's so cool man. Thank you for sharing.

@johnsmith-wd5sq 2 ай бұрын

I dont know about the Trimmer line, But i did soak Myself with Beer one Friday night and went to work on Saturday and i can tell you that Trimming was killing me all day! (This also is just Opinion and not Science tested!)

@mainstreetmower 2 ай бұрын

hahaha love it!🤣

@KikoValleyMan Ай бұрын

😂

@user-xc3yb1vk2e 21 күн бұрын

Awh you copied someone else’s comment 😂🥲 how cute

@johnsmith-wd5sq 21 күн бұрын

@@user-xc3yb1vk2e Wait, Somebody stole my comment! Damm, Thats Messed up!

@guyh.4553 20 күн бұрын

🤣🤣🤣🤣🤣

@crazyhorseracing6130 11 ай бұрын

It's still good to soak new line just to be on the safe side. Because some of this line sits in very hot warehouses for no telling how long till it gets shipped to the suppliers all over the US.

@mainstreetmower 11 ай бұрын

That's fair. I honestly didn't think about that. Thank you for sharing.

@randyjones4017 10 ай бұрын

White cable ties turn yellow and fail because they dry out quickly. That's why I always get the black UV rated zip ties. Great video!!

@Darenator1 Ай бұрын

My first trimmer mower over 20 years ago, you bought the heavy line as straight pre cut sticks in a clear poastic tube with a tight cap that had a sponge in the tube that you kept wet.

@mongomay1 Ай бұрын

It returns the elasticity to the line. A product engineer said for home owners he uses a zip lock bag with a tablespoon of water to allow it to be in a humid environment. folks go not have to get crazy about it.

@ronan4th Ай бұрын

I leave mine in a bucket with a tiny hole for the line to come through in my open trailer to keep direct sunlight on the line. Every so often I put some water in the bucket to build humidity in said bucket. I do notice the line doesn’t fracture or split as much

@readplanet23 Ай бұрын

Great video Mr. Chip. Never knew any plastic could be “revitalized” by soaking it in water. Learn something new everyday. Thank You for the information. Have A Productive Day! 🛻🚤🏖️

@mainstreetmower Ай бұрын

Thank you, and you too 🙂

@4brotroydavis Ай бұрын

Never had a problem with line breaking the first summer i had my stihl trimmer. After the first winter string broke immediately every time after being in the garage for a season. Soaked it for 2 hours. And been soaking it for about 12 hours prior to use. No breaks. Use all string

@psdaengr911 Ай бұрын

Try keeping the trimmer in your basement over the winter, along with any battery-operated tools. .

@ManWithBeard1990 11 ай бұрын

Nylon (not just trimmer line) likes to have moisture in it because it makes it tougher and more resistant to impact (though technically it does reduce the tensile strength slightly). However, you can't process nylon with the moisture in it because it forms bubbles when you try to melt the plastic. Degrades it, too. So they dry it out first, manufacture the trimmer line and may or may not reintroduce the moisture afterwards. Nylon is really hygroscopic, though, so I suspect this only matters in really hot and dry climates.

@hphillips7425 Ай бұрын

Good information. I may occasionally put the line out in the rain occasionally

@edwintaber6465 11 ай бұрын

Polymers are hard because of their molecular structure. To make them "plastic" a plasticizer which is essentially a solvent which is volatile is added. The volatile off-gasses causing the polymer to return to its hard and brittle structure.

@thangknowa3288 Ай бұрын

The biggest thing is store it in a cool place. I used to keep mine in a small outside utility building, got hot as hell out there in the summer, and my line would sometimes break off up in the bump head which was a beech. It becomes brittle. Keeping it in the sun, same thing. Think dark corner of garage, basement, what ever, just keep out of the sun or heat the best you can. Soak it, then put it back in the sun/heat, you have not accomplished chit.

@stevelangley8735 11 күн бұрын

Great advice, i am trying to use an old reel of what was good quality strimmer line and its very brittle , will do tonight

@poolhub89 Ай бұрын

Cool, Thanx! Personally, I use 12 year old single malt scotch, revitalizes the line & I get a buzz...it's a win win.

@mainstreetmower Ай бұрын

Hope you're trimmer isn't too tipsy after that

@casualobserver3145 Ай бұрын

I sip the single malt and put up with the dried out trimmer line. 🤣😂

@elebeu Күн бұрын

I appreciate you getting this information for us but the extended and extensive questioning was the reason everyone is having to wait on hold.

@Krankie_V 28 күн бұрын

The manual for my husqvarna trimmer states that soaking the line overnight will make it last longer. It seems to make it softer and more flexible, so it's probably less likely to snap when it hits something solid.

@PappyNet01 Ай бұрын

Damn, I should have looked a lot closer on the label of my old big spool of Stihl trimmer line - I gave it away to a friendly small landscaping business owner: the next time I see him I will remind him of this tip on re-moisturizing the dry-rot trimmer line. THANKS

@mainstreetmower Ай бұрын

Great. Thanks for sharing 🙂

@casualobserver3145 Ай бұрын

I recently did this with a spool that has been sitting in the garage for several years. It’s been a week. Yard day is coming up so I’ll see if this actually makes a difference.

@mainstreetmower Ай бұрын

awesome. do let us know. I am sure a lot of people would like that in this comments section.

@johnnyheckard7185 Ай бұрын

Well how did the line work out for you?

@JeffinTD Ай бұрын

Interesting. I wonder what type of plastic it is. In 3D printing some types of filament become brittle and have printing problems as they absorb moisture from the air, and a heated filament dryer is used.

@defiance34758 4 ай бұрын

Thank you

@gordongamble3244 2 ай бұрын

I did stay at a Holiday Inn Express one time.

@TheStigma 2 күн бұрын

Nylon does lose some of its flexibility when it dries out, so this is no myth. It loses/absorbs water quite slowly though, and hydrated nylon does not feel wet or moist. If you kink the line and see it easily makes damage then it's likely too dry. Unless your line is already dried up its enough to keep them in a sealed plastic bag away from direct sunlight. That's a fair bit more practical than having large containers of water sitting around. Especially since it can easily foul over time.

@mainstreetmower 2 күн бұрын

Good to know, thanks for sharing.

@brotheradam 2 күн бұрын

I live in Jamaica. Because most items like trimmer line are bought and shipped to us here after it has been dried out on shelves. If i buy it here i soak it and it lasts longer. I mean the difference is sometimes not much with the plants. But it does seem like i use less line on normal trimming.

@philswallow 13 күн бұрын

The whole spool or just a working length? I tried this with a cut length and it was much better but as a domestic user the spool would dry out over time through limited use so I will continue to trim say 15' and leave it in a bucket of water for a couple of days before use and I think that will work fine

@jamesatkinson5027 Ай бұрын

I'll have to try this I have a old roll of .095 about 3 years old now I noticed just this year not the string on the spool but my weed eater after it's installed and being used it's splitting on the ends it cost to much to just throw away and I'm not using the safety guard so it's not the cutter causing it to split

@6900pilot 11 ай бұрын

I spray mine with würth 2040 ultra from new and get great results from it, dry line just shatters imo. Also i find the twisted line way better than the smooth type.

@mainstreetmower 11 ай бұрын

Ooh that's interesting. Thanks for sharing.

@jublywubly Ай бұрын

I find the same thing with the twisted star-shaped trimmer line. I've heard a couple of "professionals" claim smooth line runs better from the spool and it doesn't tighten up. From years of personal experience, I've had the exact opposite experience.

@rauldelarosa2768 9 ай бұрын

I wish I would have known that when I had some Husqvarna line that was super brittle and I bought at a lawnmower shop. I don't know if I threw it away,it was super brutal though and disappointing because it was like you know $10 a donut of it. now that I know I'm going to take my old line and try this.

@mainstreetmower 9 ай бұрын

Yeah that would be awesome. Do let us know if you felt any difference after soaking it.

@ChrisR Ай бұрын

The answer is yes and it also applies to the polycut blades(which if you look carefully come with some water in the bag from the factory)

@BKD70 4 күн бұрын

I agree... I store my polycut blades in water... makes a huge difference in their toughness. If they get "dry" the become noticeably more brittle and break much easier.

@psdaengr911 Ай бұрын

If polyamide nylon line is kept in a tightly sealed polyethylene container/bag and only opened during summer when humidity is the highest, there would be little loss of the original 5% moisture content. Then, line installed on a stored trimmer over the winter would be of the most concern. Are the line makers cheaping out on the packaging? btw, We've open package line that has been inside our non- AC house for 3 years and worked fine this past week.

@rustyshepard9659 Ай бұрын

Im old enough to remember when plastic/ polymers were water resistant

@mainstreetmower Ай бұрын

They still are 🙂

@jaywelker5566 Ай бұрын

No, you just never understood what plastics were what and what applications each one excelled at. Or which ones are hygroscopic and which ones are hydrophobic. Nylon has ALWAYS been a hygroscopic plastic. Which is why it's not used for water tanks, 5 gallon buckets, jugs, etc. That's typically reserved for hydrophobic plastics like polyethylene or polypropylene, 2 plastics you also wouldn't use to make string trimmer line.

@rustyshepard9659 Ай бұрын

@@jaywelker5566 there again i understand the english language and if i was to make a coat made out of either type i could still label it water resistant and id be exactly correct in doing so............

@Gaming_Biker Ай бұрын

@@rustyshepard9659 His point was that they have been water-resistant, mostly waterproof, so there's no point is using verbiage that implies they weren't at some point in the past. What has changed is our use of materials that are more resistant to UV degradation & typical wear & tear or longevity of the materials themselves. Trimmer string by Stihl is likely one that has more plasticity or is more malleable, thus isn't as hard until it's dried out fully, since the harder it is, the more brittle it is. Think of acrylic paint to a certain extent.

@rustyshepard9659 Ай бұрын

@@Gaming_Biker ok i will play along i asume if i lived in a arid area like the desert south west it might make a bit of a difference but hell how much would i really need to weed wack in the desert south west now if i was from the more humid mid south such as where i currently reside its almost 98 % humidity outsi de has been raining every other day now for 2 months im guessing my weed wacker line doesnt need a good soak as the naterual its made of probably wont leach , evaporate lose to much moisture when you can cut the air with a knife im curious though how hot and dry does weed wacker line have to get before it becomes to brittle to be effective my degree in farm business management would suggest probably long after all afore mentioned weeds that needed wacking have since shrivled up and died due to lack of water.

@davidbertrand6884 Ай бұрын

For those extremely ❤️‍🔥 days where there’s hardly any moisture, you trimmer line may need to soak during the summertime ‼️ Getting it out when refilling your trimmer. Viewed 5/21/24 🇺🇸👍🏻

@d_dizzie_druck5753 Ай бұрын

I'm a beleiver in the soak. also soak those while blades they sell too😉

@rickthelian2215 11 ай бұрын

What this about Honda pulling the 216/217 for sale? I hear it’s got something to do with the way the cam was built incorrectly as the didn’t let the cam plastic cool down after manufacturing before the next step so they are finding defective engines.😊

@samday6621 Ай бұрын

I reel off ten meters to have in the truck (still away from light) and keep the rest in a cool dark place under the house. I have another reel sitting in an icecream bucket of water. But it’s sat like that for years. 😂

@AllenReinecke Ай бұрын

I have a big roll of nylon line. Had it for several years and it's not brittle. It sits on a shelf in my garage. Probably because it's not out in sunlight, it's not drying out and deteriorating at all.

@mainstreetmower Ай бұрын

Good to know, thanks for sharing.

@hubby-tubadventures01 Ай бұрын

OK, I happened upon this video and my question is relating to the trimmer head. I have about 5km on the big / bulk spools which i'm not gonna dunk till nearer the time i need to use them. But If soaking revitalises the line then can you take the strimmer head off (i have bump feeds on 2 of my Stihl machines) and dunk / soak the whole head. These are all plastic aside from the bump spring which i believe is stainless steel.

@marknye51.thefixitguy 11 ай бұрын

When I worked for a Maintenance Company in 1988 89, we ran green machines and soaked the 105 orange line in buckets with soap and water . It made the line last longer, didn't break as easy or tangle up as much

@mainstreetmower 11 ай бұрын

Good to know. Thanks for sharing Mark 🙂

@user-rp3ev5kz2o 11 ай бұрын

Yes in the real use world it makes the line last longer as its not brittle and just breaking off. One phone call doesn't amount to much of nothing but an opinion.

@mainstreetmower 11 ай бұрын

@@user-rp3ev5kz2o Agreed. Just wanted to share that opinion. ☺

@MUUKOW3 Ай бұрын

We were a Green Machine desler back in the day, good stuff ! SDK also manufactured early Shindaiwa stuff . No modern day trimmer can touch the old B45 and it's green counterpart.

@psdaengr911 Ай бұрын

Soap is a great idea. When it dried it would coat the line with fatty esters which would tend to seal in moisture.

@mattwaters6987 8 күн бұрын

My local STIHL mechanic told me the same thing.

@happyyardservice2914 2 ай бұрын

To me I soak line for really old square spools that are sitting around. I buy in bulk so some boxes of spools take years to use up. The round line I buy from Husqvarna line doesn't seem to make a difference so I don't soak those. Seems the shape might matter. No idea, just what I have seen before.

@mainstreetmower 2 ай бұрын

That's great insight. Thank you for sharing.

@Gaming_Biker Ай бұрын

I would say that if you buy in bulk & keep a few rolls on your truck & constantly exposed to UV, you might need to think about this. However, I've never seen rolls stay long enough to justify this type of treatment, so unless Stihl or another brand indicate that the string breaks down quickly, like weeks or months, due to UV exposure, I wouldn't worry about this. Not saying it doesn't or can't happen, but I don't think people will go that long to see a noticeable problem.

@andrewready1137 11 ай бұрын

Wry interesting. Thanks.

@mainstreetmower 11 ай бұрын

You are welcome Andrew 🙂

@samkennedy841 2 ай бұрын

Nylon is hygroscopic. It looses moisture when the air is dryer or low humidity. When nylon is dry, it tends to fracture or break. I’ve found that soaking in water replenishes moisture and keeps line from breaking easily

@henningvisser1108 2 күн бұрын

I only soak my line in boiling water when I replace the line on the spool. It just makes the line more pliable, is all.

@rickthelian2215 11 ай бұрын

It does say it in the Stihl Trimmer Manual overnight😊

@mainstreetmower 11 ай бұрын

No, I dont think so. But their south east office confirmed in the video.

@mattwaters6987 2 ай бұрын

I own three different manufactured trimmer lines and none say it on the labels.

@williamscoggin1509 Күн бұрын

I know that monofilament fishing line will absorb water the longer you use it while fishing and become heavier and won't cast as far until it is able to drive back out. That is the advantage of going ahead and switching to fluorocarbon fishing line. It is not porous and does not absorb water. Just thought I would throw that in.

@JA-gx4hb 29 күн бұрын

Misunderstood. Soaked my whole trimmer in the kiddie pool. Can't get it started.

@kyzor-sosay6087 4 күн бұрын

😂😂😂😂

@pat8988 Ай бұрын

I have some ten year old Stilh line without that soak symbol, so this is something recent. Soaking does soften the line though.

@mainstreetmower Ай бұрын

Good to know. Thanks for sharing

@RndmPolar_bear 11 ай бұрын

Good Video. Never knew that. Saw you on Blades channel. Thought I'd check you out.

@mainstreetmower 11 ай бұрын

Great, welcome to the channel 🙂

@whatsahandleandwhy 11 ай бұрын

Learned something new

@mainstreetmower 11 ай бұрын

Awesome, that's the goal.

@Fiterpilot 11 ай бұрын

Interesting

@onmyworkbench7000 Ай бұрын

*_TRIMMER LINE_* is made from nylon and nylon contains approximately *_20% water,_* when your trimmer line sits out, that water evaporates from the nylon and it becomes *_BRITTLE._* I have a roll of trimmer line that I bought over 6 years ago and I keep in in a bucket of water and it is as good today as the day that I bought it. *_NIOTE: *_** I keep my trimmer line in **_*WELL WATER, NOT TAP WATER WITH CHLORINE IN IT_* if you don't have access to well water you could use *_RAIN WATER._*

@mainstreetmower Ай бұрын

Good to know, thanks for sharing.

@philcook9967 26 күн бұрын

If you let tap water sit in an open container for a few days, the chlorine will evaporate. People typically do this to water their plants.

@BKD70 4 күн бұрын

*It's spelled *BRITTLE* and *NOTE* ***

@onmyworkbench7000 4 күн бұрын

@@BKD70 THANK GOD THE SPELLING POLICE ARE ON THE JOB!!!! THANK YOU SO MUCH!!!

@BKD70 4 күн бұрын

@@onmyworkbench7000 It worked. You're welcome. I couldn't bear to see an intelligent comment like yours dragged down by poor spelling or lack of proofreading... although it is impossible to achieve, strive for perfection in all that you do, never be content with "good enough".

@gregj2647 9 ай бұрын

But it does make the line last longer. Brittle line is no good so soaking it makes it good again. I personally don’t see any issues with leaving it in a bucket of water all the time

@mainstreetmower 9 ай бұрын

Whatever works for you, works. 🙂

@danrichards496 Ай бұрын

I would’ve never believed that. I might would have if someone told me to spray it with wd-40 or something like that.

@unclegeorge7845 Ай бұрын

Why not just store it in a bucket of water? Or how do you tell when the water treatment is needed?

@mainstreetmower Ай бұрын

They 'suggest' doing it only when you start to see your line get brittle or dried out.

@unclegeorge7845 Ай бұрын

@@mainstreetmower Thanks for the clarification.

@1BobsYourUncle 8 күн бұрын

If it prevents it from cracking and breaking off as often then yes, it does extend the life of the trimmer line…🧐

@georgepoore3840 6 күн бұрын

the Sthil manual recommends soaking

@laserflexr6321 Ай бұрын

Test it for yourself. Spool of some line and leave it hanging on a nail in your uninsulated shed, or even better, laying in the sun in your landscaping trailer for a year, and leave another off the same spool soaking in water for a year. Now test them both along a chain link fence, then tell me if you are gonna soak your line from now on or not.

@mainstreetmower 28 күн бұрын

Let us know next year ☺

@user-jw6sr7nc5g Ай бұрын

Plastic and oxygen might deteriorate 🤷‍♀️ Once a week dunk it in water then. Got it 🚶🚪🦖 I’m gonna try this with zip ties….the dash of my pickup along with the door panels and interior trim I’m gonna need a swimming pool

@richarddavis6133 Ай бұрын

Can't believe it would make a difference but I guess it does. Who knew-not me.

@mainstreetmower Ай бұрын

Right!

@samspade7360 11 ай бұрын

Hi. Al Bladez sent me!

@mainstreetmower 11 ай бұрын

Hey, welcome to the channel 🙂

@TheNewtons-id3sj 10 ай бұрын

I never knew...

@mainstreetmower 9 ай бұрын

Right! And It's right there... a logo on every stihl line.

@guyh.4553 20 күн бұрын

I have started to see line being stored in water so I've wondered why. Great point. But don't do it long term. I wonder how many times one could soak line? Now, if I could only load the line up properly so it works in the weed whacker! 😅😅😅

@mainstreetmower 16 күн бұрын

haha don't worry about it. We have a proper guide for that too. Check it out here: kzfaq.info/get/bejne/pK-iZddex6_OZJ8.html

@meuass 10 ай бұрын

My Milwaukee string was breaking off and gettin twisted inside the head at least 3-4 times a load.. I soaked it and it seem to have worked better. No break offs or getting twisted inside. Could just be luck.. fingers crossed on the next load up 🤞

@mainstreetmower 10 ай бұрын

That's great. Thank you for sharing.

@johnclarke6647 11 ай бұрын

That what I have heard - use on old line that you have had in the shop for a while. I have never done this to new line, just old line.

@mainstreetmower 11 ай бұрын

That's great. Did you notice any improvement in the line after soaking?

@rickcoleman8903 Ай бұрын

Nylon or polyethylene is waterproof how will it absorb anything?

@jaywelker5566 Ай бұрын

nylon absorbs significantly more moisture than PE does. PE, PP and PVC are hydrophobic plastics, Nylon does not fit the same designation and it's not used for making water containment vessels for many of the same reasons (like PE or PP) Nylon/PA6 is classified as hygroscopic. Along with ABS, PC, PETG

@xargon1234 Ай бұрын

Nylon is naturally hydroscopic it will absorb water from the air might not need this unless line it dry and brittle. If it's too dry you can use it on youre 3d printer however. As printing nylon wet causes issues

@philcook9967 25 күн бұрын

There is no such word as hydroscopic, the correct word is hygroscopic

@toolinhand Ай бұрын

It's just like with any plastic. I rejuvenated an old rc car that is almost 40 years old by soaking the plastic parts in water.

@DJ-Art-Morris 7 ай бұрын

I got some vintage Bakelite dominoes that are brittle. I wonder if letting them soak in water would revitalize them as well?

@mainstreetmower 7 ай бұрын

Maybe, good luck!

@DJ-Art-Morris 7 ай бұрын

@@mainstreetmower thanks bro

@shangrilaladeda 14 сағат бұрын

Should I keep the trimmer line in water when not in use or just soak it every few months?

@thefighter245 2 ай бұрын

These days and ages you have to be really specific.. he said soak the trimmer line not soak the whole trimmer in water.. i can see the reveiws now. Um i soaked my whole trimmer in the bath tub and the string is fine but i cant get the trimmer to start!!!!

@mainstreetmower Ай бұрын

You must be joking hahaha

@Elfin4 11 күн бұрын

He did say that it doesn't make it any stronger than its original state. So it would appear it's pointless to soak in water if it doesn't improve or provide a benefit.

@jafquist27 6 күн бұрын

It makes the line less brittle, not stronger. Something less brittle is less likely to snap in half when striking another object.

@mrwes100 11 күн бұрын

Yes.

@margaretodamo6784 11 ай бұрын

I’ll have to try this, I do tend to have lines sitting around for months, what I usually do is spritz it with WD-40 before I use it

@mainstreetmower 11 ай бұрын

Yes give it a try.

@evictioncarpentry2628 Ай бұрын

That's a silly idea when what you use stands for (W)ater (D)isplacement lol

@jostarnes7157 11 ай бұрын

Cool

@mainstreetmower 11 ай бұрын

🙂

@mrBDeye Ай бұрын

Measure line thickness before soaking in water and then measure again afterwards. If there is no significant difference this will be your answer.

@georgepruitt637 Ай бұрын

Plastic trimmer line soaking up water ???? I've got a "Banana plantation" at the South Pole, that I would love to sell to you !!!

@sanityone649 2 ай бұрын

So. How come no one asks how often this process needs to be repeated?

@mainstreetmower 2 ай бұрын

There's no set period of time it depends on your use and how often your line gets brittle (with what i've understood)

@theHUMANAUT1 3 күн бұрын

Why call when it's instructed on the package?

@mainstreetmower 2 күн бұрын

To confirm.

@jaydee5156 9 ай бұрын

Wonder if soaking in AmourAll would be better? Hmmm.

@mainstreetmower 8 ай бұрын

Most definitely not.

@jaydee5156 8 ай бұрын

@@mainstreetmower Joking of course. Trimmer line is a copolymer. When it dries out and gets brittle, it's not losing water so soaking it in water is just getting it wet on the surface. Considering that the tip end of of the line is whizzing along at 600+ miles per hour and being literally melted away from friction with rocks, concrete and chain link fences, I doubt seriously that water does anything at all. If it makes you feel better, go ahead and soak your line.

@Steve-xl2mn 3 ай бұрын

@@jaydee5156 Check "The Materials Analyst, Part 85: Fixing brittle nylon product with water"...nylon holds 1.5-2% water by volume (finished product). "Moisture acts as a plasticizer in nylon and therefore reduces strength and stiffness properties but increases elongation and toughness. In general, as moisture content rises, significant increases occur in impact strength and other energy absorbing characteristics of the material," from Amcopolymers "Nylon and Moisture Absorption". It's real and a known characteristic.

@wilbervelasco5841 Ай бұрын

😂😂😂 they recommend to shower the line every day

@bobbreit5244 13 күн бұрын

The answer I wanted was the word 'durability'. Is the dry brittle line less durable, functional or breaks off easier? If the durability is the same you're wasting your efforts.

@mainstreetmower 11 күн бұрын

Durable yes

@magicone9327 Ай бұрын

Electrical plastic wrap can and is for some manufactures made from soy! It is biodegradable. Trimmer line might be good if it was made from soy or Hemp!

@randallrun Ай бұрын

Possibly, but I know when (Toyota?) wiring harness were insulated with a soy based plastic, mice were getting under hoods and totaling vehicles by eating it. With new vehicles it’s too expensive to be able to remove harnesses.

@oldredcoonhound2182 Ай бұрын

Bre from chickanic said to do this

@mainstreetmower Ай бұрын

She's so cool. Love her.

@rogerdavenport9618 19 күн бұрын

I soak my fishing line but them big fish still break the line sometimes.

@BigSouthOutdoorsTV 9 ай бұрын

I've been in business for 24 years. Never heard of this until someone suggested it on one of my videos. How can it add moisture to a plastic "type" material? Those type materials are not porous, meaning they can't absorb moisture.

@Unit_With_Legs 2 ай бұрын

That's not entirely true. Most plastics absorb water. Look at monofilament fishing lines, they can absorb up to 8% of their weight in water. Polytetrafluoroethylene (PTFE) is the only plastic with zero water absorption.

@sharkeyist Ай бұрын

Same for fishing line, soak it and its alot more supple, trimmer line is the same.

@toddwilkinson621 Ай бұрын

I run newly spooled fishing line under warm water then cool water. It (almost lol) never jumps off the spinning reel spool into a birds nest when out fishing. Warm water seems to reset the line memory off the factory "retail" spool to the spinning reel spool size.

@johnsullivan-music3991 Ай бұрын

What if you soak it and WD-40?

@toddwilkinson621 Ай бұрын

The "WD" in WD-40 stands for "Water Displacement". I suspect it would be of no practical benefit in this case.

@mrBDeye 11 ай бұрын

I soaked my line too much. When I trim the lawn water sprays everywhere. Joking ! If line absorbs water you’d be able to check thickness with a digital caliper.

@Steve-xl2mn 3 ай бұрын

It's only a 1.5-2% absorption. Bring a good caliper! 😉

@ScottPBrown 28 күн бұрын

Maybe the line will work better than Stihl products... Ever since covid .. garbage engines. BR 800? I have a Ryobi handheld that's atronger.

@leeroyjenkins9992 Ай бұрын

Is this fuckn satire? Used to do landscaping for a living and we never soaked line 😂 heck even now I’ve had the same roll for 4 years now that I’m no longer doing other properties and it’s just fine 😂

@mainstreetmower Ай бұрын

No, not satire. Completely true. If you watch the video, you will even see the logo that comes on every stihl spool, suggesting you to do so.

@Kgthrow Ай бұрын

I soak mine in a bucket of my kids tears and the yard work does itself.. highly recommended.

@TheDark761 11 ай бұрын

Al sent me

@mainstreetmower 11 ай бұрын

Awesome, welcome to the channel 🙂

@blackbeardlawncare7811 11 ай бұрын

Do you remember that video from a few months ago about turning the chuck on your drill backward a bit to "lock it in"? The guy called all the drill manufacturers and most of them confirmed it, and a few said they weren't sure...Turns out the customer service people were wrong. Turing your drill backward only loosens it. I think that may be the case here. I'll wait for an AvE, or Project Farm video to confirm if this is legit. Seems odd that plastic needs to rehydrate.

@killer2600 11 ай бұрын

If you've seen brittle plastic you'd understand the hydration thing. You can run your trimmer with old dry line but theory is it breaks less/goes longer when it's rehydrated to like new moisture levels - which makes sense when you're dealing with brittle plastic, old brittle plastic always breaks easier than the same plastic/part new. If you've worked with the plastic trim on old cars you know the fear one has of breaking the old plastic.

@blackbeardlawncare7811 11 ай бұрын

@@killer2600 I understand the theory, but plastic doesn't get brittle from a lack of water content, it would be the degradation of plasticizers or whatever other stabilizers are used in the line. The question is, "Does water recondition the trimmer line to its original plasticity?" My money is on that it doesn't, but I would be interested to see the testing or hear from someone that understands chemical engineering, hence my reference to AvE or Project Farm.

@mikey6214 Ай бұрын

....and next you will tell us to store our batteries in the fridge.

@someguy5438 Ай бұрын

Trimmer line is water impervious.

@rogersmith6515 2 ай бұрын

Makes me wonder if you can dry out a line and then soak it in herbicide to use on weeds.

@mainstreetmower 2 ай бұрын

Interesting.

@ModelLights Ай бұрын

' and then soak it in herbicide to use on weeds.' Of course you can, but it will do basically nothing. A few drops of herbicide in the line you'd use over an hour would do almost nothing. Even with the high dilution rates of most weed killers, what is used is still far far beyond the tiny amount of humidity etc that can be held within a bit of plastic line. A 5 or 10 pound spool of line probably won't even hold an ounce, which would be an incredibly tiny amount for the huge area that line would cut. And herbicide generally needs the huge water dilution, in order to correctly spread out the tiny bits of chemicals you need. It is not feasible to use in highly concentrated form, so you need even far far more moisture than the line can possibly hold. You'd roughly need a spray system through the line, which wouldn't make sense. If something like that made sense it would have been done long ago..