Should I switch from the GAN12 to the GAN14? (solves and thoughts)

Should I switch from the GAN12 to the GAN14? (solves and thoughts) - Matty Hiroto Inaba from Hawaii

Рет қаралды 13,580

5 ай бұрын

GAN12 UV: Tension 4, Center travel 3, Corner magnets medium, Lube-Gravitas and DNM
GAN14 UV: Tension 2, Center travel 5, Corner magnets 2, Lube-Gravitas
I have been testing the GAN14 ever since I got it 5 months ago. It has so much potential, but it is always hard to change my main. I get faster TPS with the GAN14, and it is really smooth and fluid. I am getting faster times with the 14 recently. I have 3 official competitions coming up in the next 5 weeks. The next step is to test it in competition to see how it performs under pressure. Let's see how it goes!
I am sponsored by:
#triboxjp - store.tribox.com/
#gancube - www.gancube.com/ - Use the code "Matty" for a discount!
#thecubicle - www.thecubicle.com/ - Use the code "JEDI" for a discount!

Пікірлер: 90

@malenky4057 5 ай бұрын

Black internals is such a clean look, I'm glad GAN is considering bringing it back, hopefully that one does come to market.

@Geniuscuber397 5 ай бұрын

I prefer The Primary ones

@LRGnightmare 5 ай бұрын

@@Geniuscuber397me too

@ThatOneHarry 4 ай бұрын

@@Geniuscuber397same and it just doesnt look like a maglev flagship without them

@skellq4385 2 ай бұрын

@@ThatOneHarryWith black internals, it honestly just feels less quality and just looks like the gan 356 series

@ItsQubic 5 ай бұрын

0:26 The most satisfying sounds a speedcube has ever made

@emmanuelmarinliera4738 4 ай бұрын

Totally

@ClockSolver 5 ай бұрын

the 14 is probably one of the most underrated cube

@GoofyCuber-dj4tg 5 ай бұрын

I recently got the 14 and I have gotten really good times on it! My current settings are 5 for the maglev, 3 for the tension, 3 for the edge magnets, and 2 for the corner magnets. It has the feeling of the 12 but the inside feels a lot more crunchy which I'm honestly a huge fan of. It also has less catching than the 12 and people are complaining about popping when I have never gotten a pop on it in my life. Overall whatever you are more comfortable with.

@Nico127. 5 ай бұрын

Do you recommend gan 14 and better than 12,

@LKcuber333 5 ай бұрын

Great video and Love how you put your main settings and how you set them up in the description I HOENSTLY WATCHED THIS LIKE 10 times over!❤😂🎉

@LeDuyBao-ex7fj 5 ай бұрын

This man deserves an official sub 5 avg so bad

@CuberCaiden 5 ай бұрын

Glad you could make it home safely Matty! I think you should use the 14, showing everyone that the 14 is worth using, and It could be the difference of you getting a sub 5 average in comp, and not getting it. Hope you achieve results with it :)

@JonathanIsaac-hl3lp 9 күн бұрын

Nice job🎉

@ClutchCps 5 ай бұрын

The f2ls on those 3s were insane.

@worldofcubing8242 5 ай бұрын

Big reason I personally never upgraded my gan past the 11mp was because of lack of black internals, I really hope that is brought back

@cuberworld-id9gn 5 ай бұрын

hope to see you at san ramon!

@teriww 5 ай бұрын

best solutions in the US🔥🔥🔥

@sanpobyampracha2021 5 ай бұрын

Hi Matty! I have a question about the tension settings of GAN cubes since I still find it a bit confusing. Say "tension 4" of your GAN12, does this mean the fourth click away from reset or is it the fourth tension (three clicks)? Thanks!

@A1GAMEINGRitik 5 ай бұрын

Fantastic extra ordinary mind-blowing

@Leonardo-cw1dd 5 ай бұрын

hmm i like how you said the black internals are similar to the gan xs (being probably my favorite gan 3x3 i own)

@SSJChar 5 ай бұрын

I see you use the halo timer, but are you also still using cstimer? do you ever just connect the halo timer to cstimer? i do it with the original gan timer and its pretty awesome

@dont_rage_dude 5 ай бұрын

i absoutely agree with you I think people eho use the Gan 14 has light turning style

@jjmb4995 5 ай бұрын

I didn't realise it had black internals, did you chose that or does it come like that. Btw wth were those wierd sounds it's making did u like cubeheads home lol

@3DCubing 5 ай бұрын

Great video!! 🤩🤩 Also, does the black interior of the Gan 14 have a UV coating?

@SliceMoveOLL 5 ай бұрын

My question exactly

@7oclock 5 ай бұрын

@user-uc9uq3df5g 5 ай бұрын

For gan 12 setting for tension 4, do you mean after the loud click do you do 3 more clicks or 4 more clicks?

@Tito_decorazon7771 4 ай бұрын

Hey there Matty ! Do you think the Gan 12 is still worth buying or it’s better to go for the 14 ?

@playbunny4490 3 ай бұрын

For the gan 14s lube do you use a lot of gravitas or just a small dab?

@user-bl5lj8ll4y 5 ай бұрын

you should do it !

@ghe763 5 ай бұрын

Those solves in the beginning were so incredible..Also what was that f2l on the 3.58? Without the lockups on the jperm that couldve been like a fullstep 3.2/3.3, looked insane.

@MonneTheMoon 5 ай бұрын

Yeah, the F2L was 13 moves in like 1.1s I think. Edit: It was 14 moves in 1.3s

@thecalculatedcreativecoder1428 5 ай бұрын

@@MonneTheMoon Wth. Thats nuts!

@godzillafirefox923 5 ай бұрын

@@thecalculatedcreativecoder1428 imagine ll or even pll skip on that solve!

@JonasPilhoefer 5 ай бұрын

B' R D R' F R U R U' R' D R U2 R' r U r' R U R' U' r U' r' L' U' L F L' U' L U L F' L2 U L That's the solution he did. There's even a really obvious 10 move F2L solution lol: D F D' B' R D2 U R U R'

@MonneTheMoon 5 ай бұрын

@@JonasPilhoefer Yeah, that's just insane!

@Vihaan912 Ай бұрын

i think gan should release the black internalversion becquse they do make a difference

@BlackShadow2009 4 ай бұрын

Any ETA for the black internals? Can’t find any information on it. Planning to buy one

@pandahhh9115 5 ай бұрын

What comps are you going to in the next couple of weeks

@21.DontMiss 5 ай бұрын

Wait you using smart Bluetooth timer then typing the times in?

@SliceMoveOLL 5 ай бұрын

What about your magnet settings?

@thealohacuber759 5 ай бұрын

wait does the gan 14 have a option for black internals?

@MonneTheMoon 5 ай бұрын

That 3.58 had like 1.1s F2L. How!?

@CuBOYid 5 ай бұрын

Do you have the Gan 5x5?

@REN11603 4 ай бұрын

DUDE WHAT KIND OF LUBES DO YOU NEED TO GET THAT SOUND AT 0:58 like my guy thats actually insane 😭

@Azzy118 5 ай бұрын

Could the differing feels of the black and primary 14's be because of different levels of use? I'm guessing the primary internal cube has more solves on it than the black so it could have a softer feeling because its more worn out?

@ClockSolver 5 ай бұрын

no, theres a huge difference between my friends gan 11(primary internals) and his brother's gan 11(black internals), they feel different, i think primary feels better but thats just preferance

@Usuario01997 5 ай бұрын

@@ClockSolver Primary internals feels a bit drier but faster, but black internals feels soft but less faster for some reason

@jcuber8907 5 ай бұрын

i feel like the gan 12 is still reliable since it has been out for so long and the setup is easy. the only thing is the small lockups but i don’t know if that is fixed in the 14 since i haven’t tested it.

@tbbzeus007 5 ай бұрын

Bruh who asked you?

@jcuber8907 5 ай бұрын

fair @@tbbzeus007

@garnerthecube 5 ай бұрын

@@tbbzeus007 who asked if anyone asked?

@MaxSiauwCubing 5 ай бұрын

1:08 what is this 1.2 F2L bro

@GoofyCuber-dj4tg 5 ай бұрын

bruh f2l is only 13 moves wtf

@thecubingjedi808 5 ай бұрын

Lol yes

@Uminguss 9 күн бұрын

you keep getting sub 5's, if you would just join a competition you would be like one of the best cubers ever

@MaffeyZilog 3 ай бұрын

Keep practicing and one day you may be nearly as fast as Timon or Max. Keep it up, slugger.

@FriskyPotat0 5 ай бұрын

Wait howcome the internals are black?

@justadude721 5 ай бұрын

Just my opinion (I've never used a gan cube) I feel like since the 14 has so many combinations, your optimal combination is just hidden within the cube.

@kittulinff3895 5 ай бұрын

Does gan 14 black internal have uv coating?

@mikispazz6597 5 ай бұрын

From the video it looks like it is uv coated

@Zetson2952 4 ай бұрын

I still main the gane 11 mpro

@gray_listed 5 ай бұрын

Black internals instantly make a cube faster (trust)

@LKcuber333 4 ай бұрын

Still can’t figure out why your tensions pop for me

@NoahCubez 5 ай бұрын

I think you should stick with the gan 12, I feel like you can trust your turning more with it compared to the 14.

@JpicGames 5 ай бұрын

white internal 🤍

@namesless69 5 ай бұрын

can someone help me, I don't know which one should I buy, gan12 or 13

@escubingchannel 5 ай бұрын

@NotThatCuber 5 ай бұрын

No buy 12

@NotThatCuber 5 ай бұрын

Many people have said gan 12 is better than 13.Me personally I have no idea but I kinda have a sense of how the 12 feels because I have 14.

@namesless69 5 ай бұрын

@@NotThatCuber tried my friend's gan 12, for me it feels like it just wanna pop out and corner cutting isn't that great, but I love the overalls feelings especially the crunchiness. I'm expecting gan 13 has a better performance than 12 hopefully but many speedcubers said the opposite

@chiragbhat9702 Ай бұрын

Hello Je... W?

@Vihaan912 Ай бұрын

his tps is god,equal to kyle and yiheng

@EpicLitez 5 ай бұрын

Gan 12 looks very locky

@ibragimxasanov 5 ай бұрын

What is it mean TPS ?

@brentsmith3376 5 ай бұрын

Turns per second

@popcornthequail 5 ай бұрын

bruh whys ur cube so fast that u can do U4s with a typical U2 strength

@Stewy- 5 ай бұрын

1:08 (3.58) is 1.33 F2L lul

@Stewy- 5 ай бұрын

fun f2l-1 solution - y B' R D R' F2 R F' D

@Stewy- 5 ай бұрын

y B' D F D' R D2 U R U R' heh 10 move f2l

@Stewy- 5 ай бұрын

and y2 D L D' R' F D2 y' U R U R' is another 10 move f2l?? woaji

@yinyangsepticruski 5 ай бұрын

Hey stewy! Thanks for all of your reconstructions.

@thecubingjedi808 5 ай бұрын

Haha damn

@OurLadyofTheCisne 3 ай бұрын

stay with 12

@skellq4385 2 ай бұрын

Gan 14 just gets a lot of unnecessary hate, like people even say it is the worst cube of all time. Sure, it may be overpriced, but that doesn’t change the fact that it is good. People are just salty