When it starts with a group lubing, you know it’s gonna be good
@jasongraham34883 жыл бұрын
Evidence would suggest the opposite.
@doncaruso19493 жыл бұрын
My favorite Harley is the Heritage Springer classic.
@fps6363 жыл бұрын
Oh yeah, the Sally!. Two tone Springer is a MAJOR improvement. Great to see SickWideGlide in the garage. What an honor!...
@BigSmittyRiding3 жыл бұрын
Springers look amazing and if they are made well then they handle great. I think it’ll look awesome on the SPS.
@georgejed22553 жыл бұрын
the Springer looks Awesome! This is going to be a Great looking bike... like "Ghost Rider". ;0) G
@thescott_t_k89303 жыл бұрын
Words to live by, "When in doubt, spring it out!" Love the springer front end!
@willphelps67152 жыл бұрын
I just bought the same wheel from TC Bros. Great quality and great folks to deal with.
@rossk48646 ай бұрын
Rather than using a patting motion to pack roller bearings, I learned, at about 12 years old, to do a scooping motion of the edge of the bearing into my palm full of grease, and I believe the scoop motion to be much quicker to fully pack a bearing set.
@jasonsanderson93853 жыл бұрын
Left comment on Patreon, but left out my favorite bike is Grom! Ride Safe
@arenhoomen55023 жыл бұрын
It's starting to look darn good with that springer on it! I keep using those because I like the ride,and the look. (Oh,did I tell ya I'm old skool?) Stay safe, and 2 wheels down out there!!
@greggwolffis72118 күн бұрын
Love the Sucker Punch Sallys!! One of my riding buddies had one, and let me ride it a few times. Great bike!!
@willnanney77893 жыл бұрын
Really enjoying the new details in editing @blockhead keep up the awesome job!
@PTyler883 жыл бұрын
Sickwideglide out of his natural habitat is a shocking view lol. Also you better give cheese to Captain Anna's mouse that thing was working overtime.
@jcvguitars49193 жыл бұрын
This is definitely my favorite bike of yours! 🤘🏼 More videos of the chopper please!!!!
@osodabear37713 жыл бұрын
Sick new edits & sick new tattoo!!! Another great video!!!!!
@clarkbabin97993 жыл бұрын
Is that the schwinn logo on the kneck.
@motomortician26333 жыл бұрын
While I do really like the SuckerPunch build. GoldZilla is my fave!!
@its_yaboy_j52783 жыл бұрын
I can't wait have a bike I feel like I wanna have long term and start doin work on it like this. For now, I'm still searchin for what feels right. Enjoyed the video as always Blockhead, see you in the next one
@darktimbercustomknives62483 жыл бұрын
Hell yes!! My first chopper ran a twisted Tennessee springer
@John-uw7qs3 жыл бұрын
I’d be interested to see an Indian FTR on the channel and how that bike with some mods holds up against GoldZilla 🤟
@phoso293 жыл бұрын
That is going to be one sic bike after that build! Ol school build...noicly done Sir Blockhead n' crew!
I so love that bike. Ana’s sound affects are so real sounding, made me laugh.
@coloradogrownHD3 жыл бұрын
What the hell, you can’t leave us with a incomplete bike! Love the sucker punch but gotta say my favorite is goldzilla!!
@motogordo19033 жыл бұрын
Capn Anna sound effect was nasty and surprisingly realistic. 🤣
@dustyndickey762510 ай бұрын
Doing paint work it’s always a good thing to rip tags off micro fibers cuz the tags are known for scratching up your paint
@mysteeda20103 жыл бұрын
Stay humble. Ride safe.
@AdaMoto833 жыл бұрын
Man that front end looks shhhhhmazing!!!!!! Good work Block! 🤙🏾
@mannyrodrigues28563 жыл бұрын
Love the new springer front end Block🤘🤘
@TheBlacker933 жыл бұрын
Awesome looking bike. Would love a springer but our roads just aren’t good enough.
@itsmedio52763 жыл бұрын
Love Chris and that he has a wideglide keep him on the channel more please
@piasprojects3 жыл бұрын
Definitely making a cool choppa too a COOL CHOPPA!!
@Smallbore2wheels3 жыл бұрын
yeah....that rear fender-less look is great but the rooster tail sucks. if I catch any puddles or ride by any overwatered yards on my ruckus, ill end up with a mud line from my crack to the top of my helmet lol
@BlockheadMoto3 жыл бұрын
For sure, been there! haha
@barman82783 жыл бұрын
That new front end is looking gooood.
@duh...44603 жыл бұрын
That bike? Absolutely 💯
@WesFromIndiana3 жыл бұрын
Someone got some new decals for their videos😄 they look good👍
@BlockheadMoto3 жыл бұрын
Someone hired an editor 😁
@pics-by-pete3 жыл бұрын
that bike is just badass
@phantomrider51663 жыл бұрын
I've got to get a 6 over springer for my 48 now. they just look so cool. Problem is just finding one to fit my tire🤣
@WillysPerformanceCycleCtr3 жыл бұрын
Looks good brother... springer is the way to go!
@doncaruso19493 жыл бұрын
I want that Scout!
@razzrasmussen57733 жыл бұрын
Looking good. Hooah
@wsgman1003 жыл бұрын
Springer forks are awesome
@Kinnooooo3 жыл бұрын
i wna say ive been subscribed for about a year and your editing has really improved and ur vids are always fun to watch blockhead
@ljr79453 жыл бұрын
Gonna look really nice when fiinished
@thedogfather12043 жыл бұрын
Yes to the springer
@caseysewid64363 жыл бұрын
4:25 this exchange 😂😂
@daleemmott31183 жыл бұрын
Block you should get a dirtrybird rear fender their stuff is madness
@AUTOT3KHCL3 жыл бұрын
Thats gonna look awesome once it's done!
@Dudemakesense3 жыл бұрын
You should get an old Harley from the 50s and rebuild it from the ground up.
@danooshshams5563 жыл бұрын
Damn bro your vids are noice Im following your channel for 2 year and you are making a good procces in editing and everything else
@sharpshooterusmc893 жыл бұрын
Did I see a blinker left on when making that turn right before it swapped to packing the bearings. 😲😲😲😲
@Slking5073 жыл бұрын
Yes
@4MATAStudio3 жыл бұрын
That bike is going to be sick can't wait to see it!
@jcb3553 жыл бұрын
Hell to th' yeah! I love springer forks. But... gotta be CHROME. You don't hide a work of art in flat black. Ever.
@rarebreed92083 жыл бұрын
I love springers. Except when they start "pogoing" in a sharp curve.
@denyspoyner41503 жыл бұрын
Always smash the like button !
@lonestar.483 жыл бұрын
That bike looks bad ass!
@PkwyDrive133 жыл бұрын
Yo blockhead! And yes, Sally Springer
@johnh23493 жыл бұрын
Man! I love Edwin at Cycle Gear!
@masonkriebel94413 жыл бұрын
That fresh tattoo though
@paulbronnenberg20753 жыл бұрын
That is a REALLY bitchin looking springer ! THX for sharing !
@rantmtr3 жыл бұрын
of course a springer in a chopper is a must
@edwinjstephens49582 жыл бұрын
Hey there brothers great project I've always wished for a Springer frontend I ride a 68 Sportster buy the way if any of y'all have some front brake lines for my 68 with dual front calipers and or a set of forward controls see I've got cancer and get leg and hip cramps I feel better when I stretch my legs out but without something to rest them on I can't hold them out very long so makes it hard to ride for any length of time remember always keep the dirty side down and be safe healthy and happy God Bless 🤠
@jonorlowski66633 жыл бұрын
At least they used the high temp silicone. Haha.
@RevechoRides3 жыл бұрын
Do it do it do it!!!!
@joahuagideon19092 күн бұрын
So what do you do to balance the front with no break?
@datnotme992111 ай бұрын
I just bought 71 Harley Davidson sportster. It has a hardtail and springer front fork that looks like those. The problem I'm having is the rear brake linkage eyelet & bolt were ground down almost in half. It has a jockey shifter on it and it came with foot shifter. I used the eyelet and bolt from the foot shifter to replace the brake linkage eyelet. The brake lever attached there is to low to the ground. The springer front end are longer forks creating the frame to sit higher in front and lowering the rear as to oppose to stock forks. I wonder if a differently made hardtail is made to fit that could raise up the rear a bit more or should I drill & retap threads hole above the one there on the triangular shaped brake lever to raise the linkage itself then, cut the lever original bolt hole off?
@SamIAm_The_Motorcycle_Man3 жыл бұрын
Damn he got a DD sbr fucking nice
@jamesnudochannelgoodcompan43443 жыл бұрын
I want that TC BRO’ S springer fork on my 2014 883 ! How much will the springer fork cost , all in one ? From Japan 🇯🇵 Osaka City , a true fan !
@peterskrade87792 жыл бұрын
Well, color me disappointed: I assumed this would be a funny, fun video featuring footage of disastrous mishaps that resulted when Jerry Springer tried riding a chopper for the first time. I was really excited!! He'd be on the pavement, at the end, a bit bloody and worse for wear and tear, but still his usual deeply human, middle-way-Buddhist self, and the icon would quip to the camera, "This has been a blast! I now know I was born for chopper-style bikes. Well, you probably are too! Don't fight over who is the father, anymore--that is pretty played-out. And, of course, be good to each other. Come visit me at Mount Sinai!"
@solidbutterproductions3 жыл бұрын
Hell yeah looks great. And I know it was awhile ago but I appreciate the vids on the how to ride a bike my friend really needed them
@wilgarcia13 жыл бұрын
Looks great man.
@devongarcia533 жыл бұрын
Whatup from Colorado
@BoringFisherman2 жыл бұрын
I'm sorry to be that guy. But damnit! You are packing those bearings upside down! I'll link you a "how to" whenever I do the bearings on my boat trailer. They work exactly the same way..... Rant over. Carry on
@LilFonTV3 жыл бұрын
He man i recently bought a cbr 600 still waiting to get it delivered.. i see you ride in Orlando and subbed. I stay close to lake city and need ppl to ride with I’m a beginner
@sg1fan753 жыл бұрын
yes sir!
@Tony455HO3 жыл бұрын
Sucker punch sally chopper is a beautiful bike. Yeah, more videos. Cheers
@clarkbabin97993 жыл бұрын
I missed that video but regardless of being a patreon member I would have voted for the Springer front end. But maybe would've gone with the one from the guy known for inventing the stretched forks.
@scoobymoto98583 жыл бұрын
Aside from looking awesome, are there any other benefits to a springer front end?
@geoffreyjones20003 жыл бұрын
Springer ... yup
@vincek66133 жыл бұрын
Another fresh tattoo 😎
@robertlambert7906 Жыл бұрын
So what all do I have to order to just put the springer so far I got the risers the springer and the caliper what else do I need to mount light and speedo
@davidpeterson9433 жыл бұрын
bike looks awesome.
@aubreydavis27393 жыл бұрын
Nice 👍
@BAsed_AFro9 ай бұрын
Looks cute, but will kill the handling in the front end.
@reallyoldfart65403 жыл бұрын
Looks better. I saw rusted springer (the springs) the other day but the engine looked super clean like new, the rust was distracting; kind of made me search the channel for "rust."
@DaveWhite19793 жыл бұрын
Oooohhhhh yyyyyeeeeaaaaahhhhhh, pack that grease
@joetheman3573 жыл бұрын
Great video. Really got to work on my video editing. I hate being new at this youtube stuff. Lol
@Vukasin3672 жыл бұрын
Yo, is this stock length of springer? Thanks for answer!
@Paul206613 жыл бұрын
Haha made me go listen to AMERICA F*#K YEAH! MUSIC VIDEO ooh the new IG look when u show them well that was unexpected to just jump on a riding section BUT I LOVED IT was expecting to all be in the garage,glad it was also some riding ! And the new like button at the end dayum like the new visual upgrades also sick outro song !
@onlyhereonce72903 жыл бұрын
A great video.
@kyleryneost3 жыл бұрын
Sick wideglides shoes are dope! What are they tell me!!!!!!
@RickyBobber3 жыл бұрын
Wondering if you ever got the box opening implement I sent? (Aka from Dragon) I got a notice that it was undeliverable, then delivered. I never got it sent back either 🤷♂️. UPS had problems matching the city to the zip code you have for your mailbox address
@BlockheadMoto3 жыл бұрын
I DID! Just got it today, while recording a video. Holy hell man, lol, that thing is crazy! Incoming in a vid, appreciate you Dragon! 😂
@RickyBobber3 жыл бұрын
@@BlockheadMoto that's so weird! I sent that ages ago! Haha. Enjoy!
@nathanhussey13653 жыл бұрын
What’s the best bike to ride as a beginner?
@tomtruesdale69013 жыл бұрын
Was hoping to see you actually mount the front end and not to nit pick but why didn't you just pull the old front end off as one piece, unscrew the stem nut and pull it? I think you should have mounted the front brake rotor before balancing the wheel and tire, do you think it might have any effect of the over all balance? Over all the bike is looking good.
@SHIFTINGSTATE3 жыл бұрын
Yes yes annnnnnnd yes
@zurnie3 жыл бұрын
Get to da choppah!!!
@michaelcleveland56923 жыл бұрын
what do you recommend for a first bike
@Mmoose74 Жыл бұрын
Is this springer a standard length or is it plus or minus inches? I just got off TC Bros website before I came to this Channel. I'm looking at their 2+ for my new sporty rigid build. Any suggestions?
@Kris_Stiletto3 жыл бұрын
He'll yea! And, use a real HD Springer; not one of those cheap DNA Springers... :-) Peace, Stiletto :-)