Should you buy a AGT-HFRC72 Brush Cutter from agrotk / AGT from Richie Brothers Auction.

Рет қаралды 8,463

Жыл бұрын

I bought this brush cutter from Richie Brothers months ago and I'll walk you through the everything you need to know. The fittings, the blades, the designs. Good, and bad. Several surprises you won't want to miss. (Try not to drop it off the 7 foot tall trailer.) I even address how there is no documentation with these things, and no one else will help you. You need to see this. It's pretty funny too.

Пікірлер: 27

@JB-cw5uu 5 ай бұрын

I have the same unit. I done a short review on it about a yr or so back , have had similar issues with it , just a note the grade 8 washers and double nuts didn’t work on mine , the weight and stress from the high speed and heavy blade actually pulled the washer through the blade hole and off it went , still haven’t found it , I’m looking into bobcat brand replacements. Now , I feel like they will work on this machine but I haven’t put eyeballs on them yet to see if they’re compatible Thanks for the video. I totally agree. Well worth my savings of 10k or more

@iowaunemployment 2 ай бұрын

Great vid. Told me what I needed to know about quality and weak points. Godspeed.

@haroldkeller4682 10 ай бұрын

I own 1 of these. Bolts are of a metric grade 5. I changed minevto sae 5/8grade 8 withe a steel lock nut. Jyst got a heavy flat washer to hold the blade on, theres didn't live long. So far the 5/8 are wking better. I am wking this cutter in brush, the blade holder has all 4 tips bent up slightly, the carrier is too thin, I'm looking into a fux for this and diff or other replacement blades. The company blades are 180.00 each ,I'm told, ouch. Lost 1 blade last weekend, due to poor bolts. If you buy 1 of these, 1st thing after servicing, REPLACE ALL BLADE BOLTS, it will save you much grief. Affordable blades Better blade bolts ans retainers Thicker blade carrier And this mower would definitely be a beast in the woods, and not running to the shop every so often to make repairs. All this and mine has 6.5 hrs run time on it. As I stated, not abusing it but wking it within the specified purpose it was advertised for.

@PlanoRednecks 10 ай бұрын

All smart ideas. Thank you for watching and sharing your ideas.

@alanruechel2240 3 ай бұрын

Auction chum ! I bought a 6' tiller just hoping for the best at this point

@calvinhall4744 Жыл бұрын

Thanks for the video

@PlanoRednecks Жыл бұрын

Thanks for watching. Hope it helps someone else.

@nickg7323 11 ай бұрын

The bolts that hold the blades on are too small. While the blade spins on the center bushing, there would still be some force applied to the head of the bolt. Several manufacturers use a 1-1/8 blade bolt with a 1-3/16 collar the blade can spin on. I might modify my carrier to install the proper bolt. I haven't used my cutter yet, and don't want to after seeing what happened to that A/C condenser. I figure for $100 in bolts, a couple big drill bits to step up to 1-1/8 and a little time, I can fix the cutter to work as well as the one it's made to resemble. EDIT: After measuring, it looks like the bushing they welded into the blade carrier would be too thin if I had gone with a standard brush cutter blade bolt. I opted to drill the carrier plate out to fit a 7/8" grade 8 bolt. We'll see how that works out.

@danielkeller5695 5 ай бұрын

How did that work for you?

@nickg7323 5 ай бұрын

@@danielkeller5695 So far so good. I have put about 8 hours on the cutter taking down some smaller trees (nothing larger than an old oil can in diameter) and it has worked well. All blades are still firmly in place!

@MikeDPlxztc 7 ай бұрын

I've been looking at this brush cutter pretty hard lately cheapest one I found was about 3300 before shipping one of the first things I noticed just looking at the limited pictures was the bolts looked inadequate that held the blades on💀 that's some dangerous stuff right there glad nobody got hurt but the coil. I feel for you man I'm an AC guy too😂. I don't know I think I'm going to keep shopping I'm not in a hurry and it'll be interesting to see if you develop any other problems😅

@mattminauro453 Ай бұрын

Tell us where you found this for $3300 please ?

@blakegockley 5 ай бұрын

So which bolts nuts and washers should i change too. And sizes please. Just bought one. Wanting to change it all out. Besides greese is there any oil needed?

@l.p8383 10 ай бұрын

Do you think you could use the standard Bushhog bolts an nuts on this set up? Might require some larger bolt holes in the blades an carrier as well as an access hole in the deck so you can get to the nuts?

@SIXPACFISH Ай бұрын

Replace all the Chinesiem bolts, chains, and other hardware on that oriental death machine.

@davida6383 10 ай бұрын

What did you pay? Should prolly change to grade 8 bolts and weld the nuts on to prevent flying blades

@nickg7323 11 ай бұрын

Do you know how much grease you used to fill your spindle housing? I have about one tube in and it's coming out the breather. I've read some horror stories on guys greasing, not putting enough in, and torching the spindle bearings.

@PlanoRednecks 11 ай бұрын

I used 3/4 of a tube in that. Just pump it in one side until it comes out of the screen on the other side. Run it for a day and top it off periodically. You'll be fine. Thanks for watching and commenting.

@nickg7323 11 ай бұрын

Thanks for the reply and the video! BTW, I ended up putting 7/8 grade 8 bolts on the blades. I used a magnetic drill press and things went pretty easily. If I end up snapping one of those my next step is going to 1-1/8 or 1-3/16 bolts that are made for rotary cutters.

@hhazelhoff1363 8 ай бұрын

Get a FAE drum mulcher and be happy for the rest of your live

@gregbrown9271 21 күн бұрын

If you got the Rino you wouldn't have any problems

@LavaOceanAdventures 7 ай бұрын

Change bolts to american grade 8 never had issue again

@kills456 Жыл бұрын

Nozzles are replaceable on grease guns

@PlanoRednecks Жыл бұрын

Yes they are. Good point. It was a small and cheap one. I bought the 20V Dewalt and am so much happier. Going through a lot of grease with all this new equipment.

@LilMississippiProductions 8 ай бұрын

I burnt my box up due to no great, but I rebuilt my box for less than $100. Not too difficult. Do not pay them $1K for a new box. Good luck getting parts from them as well or any help for that matter. I videoed my rebuild and link is kzfaq.info/get/bejne/bLGei6ujmqrDj5c.html.