Do-it-yourself faucet repair in the shower cabin Repair of single-lever faucet cartridge. How to change the cartridge in the mixer. Faucet cartridge replacement. Do-it-yourself shower cabin repair. How to change the cartridge in the mixer with your own hands.
goo.su/FenStE - Construction hair dryer from the roller.
• Замена картриджа в сме... - Repair of a hot sink faucet.
bit.ly/ElSanKan - Subscribe but my ZEN channel
bit.ly/Pomkan - Support the channel financially
bit.ly/vod_sv_ruk The best plumbing videos
bit.ly/sant_sv_ruk Best plumbing videos
sam-elektrik.ru/osh/ Gross mistakes in construction services
00:00 - How to fix the faucet in the shower.
00:34 - Remove the handle from the mixer.
00:52 - Unscrew the decorative nut that holds the cartridge.
01:36 - We check the cartridge for compliance with the landing dimensions.
01:59 - Installing the cartridge in the faucet.
02:15 - We dry the mixer for applying sealant.
02:28 - Installation of a decorative overlay on the mixer.
02:50 - We install the handle on the mixer.
03:00 - We check the operation of the mixer.
03:14 - Support the video about the repair of the faucet with like, repost and comment.
Sometimes we are faced with a situation where the mixer drips, and sometimes the mixer even flows. The mixer cartridge needs to be replaced. Shut off the water and remove the mixer handle.
Now the hardest part begins. This is to unscrew the decorative nut of the mixer without damaging it. It is complicated by the fact that in the event of a breakdown, the mixer is not new, and the nut has become rather old. We cut off the sealant, process the junction of the nut WD-40. And for unscrewing, we use a wrench to unscrew the oil filters in the car. Since our nut is small compared to the oil filter, we use a block of wood to adjust the wrench size.
If everything is done carefully - the nut is unscrewed. We check that the landing of the purchased cartridge for the mixer is suitable. We install the cartridge, checking that the latches sit in their places.
We twist the decorative nut. Install the mixer handle. Check if the mixer is working.
Do-it-yourself electrics, construction and repair - a channel for those who make repairs in their private house or apartment with their own hands. You will learn how to build a house, a garage with your own hands. You will learn how to make heating, plumbing, electrical wiring with your own hands. How to do it efficiently, quickly and not expensively. The head of the channel is Igor Ekimov, an electrical engineer, the author of 4 books, videos and articles on electrical, construction and repair.
Subscribe to our channel goo.gl/a6YJdO
Electronics channel for beginners bit.ly/KANARD
Subscribe to this channel goo.gl/a6YJdO
I will help promote your channel bit.ly/prodvizh
Consultation ekimov-igor.ru/consalt
Blog "Electrics and repair" ekimov-igor.ru/
My books book24.ru/r/TvgMj
My social network account iekimov
My email is msnbel@ya.ru
The best videos "House with your own hands" bit.ly/dom_sv_ruk
The best videos "Do-it-yourself electrician" bit.ly/el_sv_ruk
Best DIY Plumbing Videos bit.ly/sant_sv_ruk
The best DIY Repair videos bit.ly/RemSvRukPl
Video "Profession electrician, builder" bit.ly/prof_el
#igoryekimov #ekimovigor #electricalconstruction #plumbing #pumpingstation #watersupply #faucet #pipe #plumber