shred shack more like shred hack

Friday's have started to become one of the best days of the week. I wonder why.....

How does this guy not have more subs?

Videos with the basics are great and are a necessity for the community! Thank you for filming this!

If you want to bomb hills, put softer bushings on the road side of the hanger and harder on the deck side. You want your back end to be slightly softer than your front truck. This can help reduce speed wobbles in general because you will have more control of your backend. Ideally you would have a lower angle baseplate in the back, but this should help you hit hills.

Great channel! Started skateboarding pools/parks&ramps in the mid-70s then stopped after high school until taking an interest in longboarding recently and I replaced the old 1970's Tracker Mid-Track trucks and green Kryptonic 70mm pool/park wheels on my 1977 Alva Original #1 with 180mm Paris V3's and Blood Orange Liam Morgan 65mm 80A wheels. Keep up the good work and have fun!

These guys deserve so much more than there getting

Would love a video on some of your favorite safety gear/helmets & stuff!!

Thanks for the wax in the pivot cup idea!

great content, great channel and vibes!

Thanks for the tip on squeaking, I've never disassembled my trucks so I hope I don't over tighten them when I put them back together

Another great video, just got my first cruiser. Thanks!

That squeaking tip actually really help me a lot with my roller skates, and it seems that everyone in roller skating I asked, they didn't seem to have an answer for it!

Your channel is very informative, particularly for a beginner like myself. Thank you.

Ive been boarding for almost 1 year now! Thanks for tips, awesome quality as always!!

you should try out something called a freeboard, it’s like a longboard with a third and fourth 360 degree rotating wheel. it’s supposed to simulate snowboarding in summer on concrete!

congrats on how your channel has evolved ! Great content, high end production, keep it up bro !!!!!

Hey man, super useful video. Great production quality as always. I'd love to see a review of the Pantheon Ember - they market it as a cruiser/commuter board, seems right up your alley.

Just got back into boarding. Been inconsistent for 20~ years on a board with a break of 5ish years in between. Appreciate it!

The last one is the only new one I heard. Will definitely be using it! Great Video

Graphite spray lubrication (used for key holes in locks) is great for the bushings and truck parts too. It can get messy so use it outside over something you don't want a black stain on if a drip occurs. The bad thing about wax is that it will invite dirt and grime to accumulate in those areas, whereas once applied the graphite spray is dry and not sticky, so less chance of accruing dirt in those areas. Great video as always, keep em coming. I enjoy your laid back review style. You and your crew should do some videos of just skating too. Cruising, carving, antics, whatnot. Like the snowskate video, that was fun to watch. Thanks for putting out useful and entertaining content, keep it up!

I do hard bushings board side and soft bushings road side, let's me dive into carves but has much better rebound than just having the soft bushings.

Can you do a video on risers; all risers, shock pads to angles...etc...

I recently started using an old brush I used for my dog, works great and it doesnt wear my grip down (so far). U can use a wirebrush for the harder parts, that can have some more wear on your grip tho..

I've been skateboarding since the '70's and I knew that gum rubber was good for cleaning sand paper but I never thought to use it on griptape. Shoe soles are made of gum rubber sometimes which is what I always used. Second hand stores are a good place to find those. I also love the wax on the urethane parts of the truck suggestion.

Thanks for the hakss. I’m beginner really appreciate. 👍

shred shack do be hacking dem boards

You can also use a shoe brush to clean grip tape

can you do a video showing how to take the bolts out? I hear what your saying but I'd love to just see how it's done, thanks!

if the board is squeking, it is also because there is no grease left in the hole of the base plate, which causes more feiction, which results in squeaking, so you can get some lithium grease (the sticky annoying stuff) and put it in the hole of the base plate where the hanger goes (idk what it is called

Thanks man, new to skateboarding and these videos have been giving me a next step forward.

Was worth watching till the end cause that last hack was super useful. Thanks for the vid.

It would be cool, to see a review of lean board.

You should do a review on one of the 121c carbon fiber boards. Super sustainable for the environment not to mention nye indestructible. Would be awesome if someone like you did a review on them since like no one has really done an in-depth review of these boards. Just a thought. Love the channel BTW keep up the awesome vids. 🤙🏻

you can use vaseline on pivot cups and trucks for it to be silent

Don't mind me, just trying to help with the algorithm. Keep up the good work, guys!

Drop the shred shack merch brudda🤙🏽

Really digging the new shred shack Fridays 🤙🏼 epic brah 🤙🏼

Been longboarding since 2011 and I've never heard the wax in the trucks trick before. Something I'm gonna try for sure!

Unbelievable how much you guys have blown up since the beginning it’s so well deserved

good tips! graphite works too for the pivot cup squeak. just shave off some pencil lead in there and you'll be good to go.

Good ideas! Thanks

Can you do a video on skate racks/stands? Seems floor stands have an issue with spacing for longboards/surfskates

Best channel ever

Awesome mate. Awesome stuff. Keep it up!!

Love your videos. Super helpful for a noob like me.

Love your videos. Was wondering if you good do something about gullwing sidewinder trucks. I've just started & I bought a Sector 9 Bamboo Binco. Can't find much on YT.

Graphite dust works for squeaking too

Thank you for being to the point! This is tl;dr maintenance!

Just got my omakase 😁 Can’t wait to carve. Thank you for all the motivation and great content.

whatss uppp sorry i wasnt early today bro

Always love new videos even when I know all of the hacks

All right question here from a guy who wants to get back in longboarding: I have a 2012 (I think) land yatch drop carve that I really like. But now I am mostly cruising around and for that I feel the ride a little to rough. If I change the wheels for something bigger and softer (I have now my old mini zombies 70mm 80a) will it really change the smoothness of the ride? We ride in the city with lots of imperfections on the road.

great video!! would like to se a review of decathlon dancing longboard

Gotta try change bushes on my Carver... it needs help vs. my far better Yow... looking forward to trying Smoothstar but they're like hens teeth these days...

Can you do review about the landyachtz drop cat 33

Miss ya termine de leer la nota final de la clase pasada le escribí a la profesora que le había enviado la información que le había enviado la semana que viene y no me ha llegado nada de lo que me dijo que le había enviado

Heh. Thanks to my work my hands barely survive a day without a scratch. But thanks for the heads up on the holding angle

commenting for the algorithm, very cool video

Didn't actually know all of these, thanks!

how i make my cruiser stop vibrating loudly (it aoybds a lot)

an even better squeaky truck fix is a drop of silicone oil in the pivot cup. If that doesn't fix it, then a drop on the bushings... Don't use petroleum oil, since that dissolves plastic...

i´m still watching it but you are the bests!

Is there a smooth way to put the dinghy on the ground I recently got one and I either bend over and put it down or drop it regularly and it bounces

Great vids as usual. I wonder if you guys could do a review of DKL Skateboarding griptape. I love it for cruising and saving my hands and shoes.

Can you also use silicone spray or lube on the pivoting cups? I see no reason not to and it seems a bit more sensible than tiny parts of wax despite that working too I guess

i was paranoid about my longboard making that weird skeking sound but thanks to saying that it is the truck

Hey do I ask here if I have any questions about what board I should buy?

what do you think of long island boards ?

Interesting! Cant wait to use those someday)

Question I really hope you’ll get to: Does the bones bearing cleaner work with bearings with built in spacers?¿

Can u review the atom drop through 41 inch longvoard?

Hi sorry off topic where do i buy some bushings for the yow meraki s5 i

Hey can u make a videos about crusierboard tricks there is no videos like that I can find

Any tips on what to do if we use new bearings and the truck axle has extra space on the side after tightening the axle nut? I switched zealous bearings onto my hawgs but the original spaceball bearings were a little wider so the axle nut would screw on perfectly leaving no extra space on the axle. However, with zealous it would appear that there is a little left over on the truck axle (should this be something to be concerned about?)

Keep up the work!

Thanks! been meaning to clean my griptape...

what cleaner do you guys use? like the fluid you put in the container

I dont even skate and i like this channel 😄 👍

Vaseline or plumbers grease help dramatically with squeaking.

Instead of paraffin or wax, you can use silicon fat lube. It's very effective to get the squeaking away and protect the rubber.

Nice hacks!

What sort of bearing cleaner do u recommend, bro? I saw too many recommendations and it gets confusing.

Sorry for being late😔 I just got back from surfing and now checked my notifications

Where can I find the hoodie

What board is at 3:10?

What kind of cleaner would you suggest for bearings?

BTW KEEP UP THE GOOD WORK

3:48 lithium grease should work or maybe graphite.

I never knew about candle wax I would just buy new bushing lol

Heavy wheels in back ✔️ I'll try for sure .

Uhhh those things aren't for cleaning belt or rotary sanders they're for stopping them when they're spinning and you don't wanna walk away from it while it's moving.

Commenting for KZfaq algorithm

1:33 nice curfboard ;)

bruh I'm gonna be done good when I get my board thanks to you B)

🤙

New vid!

That grip stick at the beginning also causes cancer if you inhales those small particles of rubber that get scrapped off when you sand it on the grip tape. Just be careful

Just added total to the comment section

Wish I had this video a month ago lol